ISO/DIS 22476-1

Preview this standard in our Online Browsing Platform (OBP)

This Draft International Standard is in the enquiry phase with ISO members.

Will replace ISO 22476-1:2022

Abstract

This document establishes equipment, procedural and reporting requirements and recommendations on cone and piezocone penetration tests.

NOTE This document fulfils the requirements for cone and piezocone penetration tests as part of geotechnical investigation and testing according to the EN 1997 series.

This document specifies the following features:

a) type of cone penetration test;

b) cone penetrometer class according to Table 2;

c) test categories according to Table 3;

d) penetration length or penetration depth;

e) elevation of the ground surface or the underwater ground surface at the location of the cone penetration test with reference to a datum;

f) location of the cone penetration test relative to a reproducible fixed location reference point;

g) pore pressure dissipation tests.

This document covers onshore and nearshore cone penetration test (CPT). For requirements for offshore CPT, see ISO 19901-8.

General information

Status
: Under development

Stage
: Full report circulated: DIS approved for registration as FDIS [40.99]
Edition
: 3
Technical Committee :
ISO/TC 182

ICS :
93.020
RSS updates