This document specifies a procedure for the determination of kinematic viscosity (ν) by calculation from dynamic viscosity (η) and density (ρ) of both transparent and opaque liquid petroleum products and crude oils using the Stabinger type viscometer.
The result obtained using the procedure described in this document depends on the rheological behaviour of the sample. This document is predominantly applicable to liquids whose shear stress and shear rate are proportional (Newtonian flow behaviour). If the viscosity changes significantly with the shear rate, comparison with other measuring methods is not possible except at similar shear rates.
The precision has been determined only for the materials, density ranges and temperatures described in Clause 13. The test method may be applied to a wider range of viscosity, density, temperature and materials. The precision and bias may not be applicable for materials not listed in Clause 13.
Status: Under development
Edition: 2Number of pages: 20
Technical Committee: ISO/TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources
- ICS :
- 75.080 Petroleum products in general
This standard contributes to the following Sustainable Development Goal:
ISO/DIS 23581Stage: 40.00
Got a question?
Check out our FAQs
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)
Keep up to date with ISO
Sign up to our newsletter for the latest news, views and product information.