ISO 16332:2018 specifies a fuel/water separator comparison test under defined and simplified laboratory conditions.
This test is intended for pressure side fuel/water separators as well as for suction side fuel/water separators. Pressure side fuel/water separators are tested with fine droplets and suction side filters are tested with coarse droplets using the same test rig layout.
The rated flow (in litres per hour) is intended for the range between 50 l/h and 1 500 l/h. By agreement between customer and fuel/water separator manufacturer, and with some modifications, the procedures can be used for fuel/water separators with higher or lower flow rates.
Status: PublishedPublication date: 2018-04
Edition: 1Number of pages: 44
Technical Committee: ISO/TC 22/SC 34 Propulsion, powertrain and powertrain fluids
Buy this standard
|std 1 166|
|std 2 166||Paper|