3
Good Health and Well-being
Sustainable Development Goal

3 Good Health and Well-being

Ensure healthy lives and promote well-being for all at all ages

Access to quality healthcare is an essential human right. ISO has numerous standards supporting safe, quality medical practices and equipment that help healthcare providers deliver a more reliable and effective service.

These include standards on sterilization methods, medical devices, surgical implants and instruments, health informatics and related products, among other areas of focus. Notable examples are the ISO 11137 series for the sterilization of healthcare products by radiation and ISO 7153 on materials for surgical instruments.

ISO also develops standards to help local governments promote health and well-being in their communities, such as International Workshop Agreement IWA 18, Framework for integrated community-based life-long health and care services in aged societies, and ISO 37101 for the sustainable development of communities.

Discover more

 

Delve deeper with articles and videos on our dedicated microsites:

189 standards contributing to SDG 3

Standard and/or project Sector TC
IWA 28:2018
Faecal sludge treatment units -- Energy independent, prefabricated, community-scale resource-recovery units -- Safety and performance
ISO/TMBG
ISO/DIS 3630-1 [Under development]
Dentistry -- Endodontic instruments -- Part 1: General requirements
Health, medicine and laboratory equipment ISO/TC 106/SC 4
ISO 4074:2015
Natural rubber latex male condoms -- Requirements and test methods
Health, medicine and laboratory equipment ISO/TC 157
ISO/AWI 4135 [Under development]
Anaesthetic and respiratory equipment -- Vocabulary and semantics
Health, medicine and laboratory equipment ISO/TC 121/SC 4
ISO 5667-1:2006
Water quality -- Sampling -- Part 1: Guidance on the design of sampling programmes and sampling techniques
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-3:2018
Water quality -- Sampling -- Part 3: Preservation and handling of water samples
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-4:2016
Water quality -- Sampling -- Part 4: Guidance on sampling from lakes, natural and man-made
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-5:2006
Water quality -- Sampling -- Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-6:2014
Water quality -- Sampling -- Part 6: Guidance on sampling of rivers and streams
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-10:1992
Water quality -- Sampling -- Part 10: Guidance on sampling of waste waters
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-11:2009
Water quality -- Sampling -- Part 11: Guidance on sampling of groundwaters
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-12:2017
Water quality -- Sampling -- Part 12: Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-13:2011
Water quality -- Sampling -- Part 13: Guidance on sampling of sludges
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-14:2014
Water quality -- Sampling -- Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-16:2017
Water quality -- Sampling -- Part 16: Guidance on biotesting of samples
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-21:2010
Water quality -- Sampling -- Part 21: Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-22:2010
Water quality -- Sampling -- Part 22: Guidance on the design and installation of groundwater monitoring points
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-23:2011
Water quality -- Sampling -- Part 23: Guidance on passive sampling in surface waters
Sustainability and environment ISO/TC 147/SC 6
ISO 5667-24:2016
Water quality -- Sampling -- Part 24: Guidance on the auditing of water quality sampling
Sustainability and environment ISO/TC 147/SC 6
ISO 5840-1:2015
Cardiovascular implants -- Cardiac valve prostheses -- Part 1: General requirements
Health, medicine and laboratory equipment ISO/TC 150/SC 2
ISO/DIS 5840-1 [Under development]
Cardiovascular implants -- Cardiac valve prostheses -- Part 1: General requirements
Health, medicine and laboratory equipment ISO/TC 150/SC 2
ISO 5841-2:2014
Implants for surgery -- Cardiac pacemakers -- Part 2: Reporting of clinical performance of populations of pulse generators or leads
Health, medicine and laboratory equipment ISO/TC 150/SC 6
ISO 5841-3:2013
Implants for surgery -- Cardiac pacemakers -- Part 3: Low-profile connectors (IS-1) for implantable pacemakers
Health, medicine and laboratory equipment ISO/TC 150/SC 6
ISO 6876:2012
Dentistry -- Root canal sealing materials
Health, medicine and laboratory equipment ISO/TC 106/SC 1
ISO 7176-1:2014
Wheelchairs -- Part 1: Determination of static stability
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-2:2017
Wheelchairs -- Part 2: Determination of dynamic stability of electrically powered wheelchairs
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-3:2012
Wheelchairs -- Part 3: Determination of effectiveness of brakes
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-4:2008
Wheelchairs -- Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-5:2008
Wheelchairs -- Part 5: Determination of dimensions, mass and manoeuvring space
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-6:2018
Wheelchairs -- Part 6: Determination of maximum speed of electrically powered wheelchairs
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-7:1998
Wheelchairs -- Part 7: Measurement of seating and wheel dimensions
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-8:2014
Wheelchairs -- Part 8: Requirements and test methods for static, impact and fatigue strengths
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-9:2009
Wheelchairs -- Part 9: Climatic tests for electric wheelchairs
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-10:2008
Wheelchairs -- Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-11:2012
Wheelchairs -- Part 11: Test dummies
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-13:1989
Wheelchairs -- Part 13: Determination of coefficient of friction of test surfaces
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-14:2008
Wheelchairs -- Part 14: Power and control systems for electrically powered wheelchairs and scooters -- Requirements and test methods
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-15:1996
Wheelchairs -- Part 15: Requirements for information disclosure, documentation and labelling
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-16:2012
Wheelchairs -- Part 16: Resistance to ignition of postural support devices
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-19:2008
Wheelchairs -- Part 19: Wheeled mobility devices for use as seats in motor vehicles
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-21:2009
Wheelchairs -- Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-22:2014
Wheelchairs -- Part 22: Set-up procedures
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-25:2013
Wheelchairs -- Part 25: Batteries and chargers for powered wheelchairs
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-26:2007
Wheelchairs -- Part 26: Vocabulary
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-28:2012
Wheelchairs -- Part 28: Requirements and test methods for stair-climbing devices
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7176-30 [Under development]
Wheelchairs -- Part 30: Wheelchairs for changing occupant posture -- Test methods and requirements
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 7206-1:2008
Implants for surgery -- Partial and total hip joint prostheses -- Part 1: Classification and designation of dimensions
Health, medicine and laboratory equipment ISO/TC 150/SC 4
ISO 7864:2016
Sterile hypodermic needles for single use -- Requirements and test methods
Health, medicine and laboratory equipment ISO/TC 84
ISO 7885:2010
Dentistry -- Sterile injection needles for single use
Health, medicine and laboratory equipment ISO/TC 106/SC 4
ISO 7886-1:2017
Sterile hypodermic syringes for single use -- Part 1: Syringes for manual use
Health, medicine and laboratory equipment ISO/TC 84
ISO 7886-2:1996
Sterile hypodermic syringes for single use -- Part 2: Syringes for use with power-driven syringe pumps
Health, medicine and laboratory equipment ISO/TC 84
ISO 7886-4:2018
Sterile hypodermic syringes for single use -- Part 4: Syringes with re-use prevention feature
Health, medicine and laboratory equipment ISO/TC 84
ISO 8124-1:2018
Safety of toys -- Part 1: Safety aspects related to mechanical and physical properties
Health, medicine and laboratory equipment ISO/TC 181
ISO 8245:1999
Water quality -- Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
Sustainability and environment ISO/TC 147/SC 2
ISO 8317:2015
Child-resistant packaging -- Requirements and testing procedures for reclosable packages
Freight, packaging and distribution ISO/TC 122/SC 3
ISO 8537:2016
Sterile single-use syringes, with or without needle, for insulin
Health, medicine and laboratory equipment ISO/TC 84
ISO 9999:2016
Assistive products for persons with disability -- Classification and terminology
Health, medicine and laboratory equipment ISO/TC 173/SC 2
ISO 10079-1:2015
Medical suction equipment -- Part 1: Electrically powered suction equipment
Health, medicine and laboratory equipment ISO/TC 121/SC 8
ISO 10079-2:2014
Medical suction equipment -- Part 2: Manually powered suction equipment
Health, medicine and laboratory equipment ISO/TC 121/SC 8
ISO 10079-3:2014
Medical suction equipment -- Part 3: Suction equipment powered from a vacuum or positive pressure gas source
Health, medicine and laboratory equipment ISO/TC 121/SC 8
ISO 10542-1:2012
Technical systems and aids for disabled or handicapped persons -- Wheelchair tiedown and occupant-restraint systems -- Part 1: Requirements and test methods for all systems
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 10555-1:2013
Intravascular catheters -- Sterile and single-use catheters -- Part 1: General requirements
Health, medicine and laboratory equipment ISO/TC 84
ISO 10555-3:2013
Intravascular catheters -- Sterile and single-use catheters -- Part 3: Central venous catheters
Health, medicine and laboratory equipment ISO/TC 84
ISO 10555-4:2013
Intravascular catheters -- Sterile and single-use catheters -- Part 4: Balloon dilatation catheters
Health, medicine and laboratory equipment ISO/TC 84
ISO 10555-5:2013
Intravascular catheters -- Sterile and single-use catheters -- Part 5: Over-needle peripheral catheters
Health, medicine and laboratory equipment ISO/TC 84
ISO 10555-6:2015
Intravascular catheters -- Sterile and single-use catheters -- Part 6: Subcutaneous implanted ports
Health, medicine and laboratory equipment ISO/TC 84
ISO 10651-3:1997
Lung ventilators for medical use -- Part 3: Particular requirements for emergency and transport ventilators
Health, medicine and laboratory equipment ISO/TC 121/SC 3
ISO 10651-4:2002
Lung ventilators -- Part 4: Particular requirements for operator-powered resuscitators
Health, medicine and laboratory equipment ISO/TC 121/SC 3
ISO 10993-1:2018
Biological evaluation of medical devices -- Part 1: Evaluation and testing within a risk management process
Health, medicine and laboratory equipment ISO/TC 194
ISO 10993-2:2006
Biological evaluation of medical devices -- Part 2: Animal welfare requirements
Health, medicine and laboratory equipment ISO/TC 194
ISO 10993-3:2014
Biological evaluation of medical devices -- Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity
Health, medicine and laboratory equipment ISO/TC 194
ISO 10993-10:2010
Biological evaluation of medical devices -- Part 10: Tests for irritation and skin sensitization
Health, medicine and laboratory equipment ISO/TC 194
ISO/IEEE 11073-10101:2004
Health informatics -- Point-of-care medical device communication -- Part 10101: Nomenclature
Health, medicine and laboratory equipment ISO/TC 215
ISO/IEEE NP 11073-10101 [Under development]
Health informatics -- Point-of-care medical device communication -- Part 10101: Nomenclature
Health, medicine and laboratory equipment ISO/TC 215
ISO 11135:2014
Sterilization of health-care products -- Ethylene oxide -- Requirements for the development, validation and routine control of a sterilization process for medical devices
Health, medicine and laboratory equipment ISO/TC 198
ISO 11137-1:2006
Sterilization of health care products -- Radiation -- Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
Health, medicine and laboratory equipment ISO/TC 198
ISO 11145:2018
Optics and photonics -- Lasers and laser-related equipment -- Vocabulary and symbols
Special technologies ISO/TC 172/SC 9
ISO 11156:2011
Packaging -- Accessible design -- General requirements
Freight, packaging and distribution ISO/TC 122
ISO 11318:2002
Cardiac defibrillators -- Connector assembly DF-1 for implantable defibrillators -- Dimensions and test requirements
Health, medicine and laboratory equipment ISO/TC 150/SC 6
ISO 11607-2 [Under development]
Packaging for terminally sterilized medical devices -- Part 2: Validation requirements for forming, sealing and assembly processes
Health, medicine and laboratory equipment ISO/TC 198
ISO 11608-1:2014
Needle-based injection systems for medical use -- Requirements and test methods -- Part 1: Needle-based injection systems
Health, medicine and laboratory equipment ISO/TC 84
ISO 11608-2:2012
Needle-based injection systems for medical use -- Requirements and test methods -- Part 2: Needles
Health, medicine and laboratory equipment ISO/TC 84
ISO 11608-3:2012
Needle-based injection systems for medical use -- Requirements and test methods -- Part 3: Finished containers
Health, medicine and laboratory equipment ISO/TC 84
ISO 11608-5:2012
Needle-based injection systems for medical use -- Requirements and test methods -- Part 5: Automated functions
Health, medicine and laboratory equipment ISO/TC 84
ISO 11608-7:2016
Needle-based injection systems for medical use -- Requirements and test methods -- Part 7: Accessibility for persons with visual impairment
Health, medicine and laboratory equipment ISO/TC 84
ISO 11609:2017
Dentistry -- Dentifrices -- Requirements, test methods and marking
Health, medicine and laboratory equipment ISO/TC 106/SC 7
ISO 11683:1997
Packaging -- Tactile warnings of danger -- Requirements
Freight, packaging and distribution ISO/TC 122
ISO 11979-1:2018
Ophthalmic implants -- Intraocular lenses -- Part 1: Vocabulary
Special technologies ISO/TC 172/SC 7
ISO 11979-2:2014
Ophthalmic implants -- Intraocular lenses -- Part 2: Optical properties and test methods
Special technologies ISO/TC 172/SC 7
ISO 11979-4:2008
Ophthalmic implants -- Intraocular lenses -- Part 4: Labelling and information
Special technologies ISO/TC 172/SC 7
ISO 12100:2010
Safety of machinery -- General principles for design -- Risk assessment and risk reduction
Mechanical engineering ISO/TC 199
ISO 13127:2012
Packaging -- Child resistant packaging -- Mechanical test methods for reclosable child resistant packaging systems
Freight, packaging and distribution ISO/TC 122/SC 3
ISO 13485:2016
Medical devices -- Quality management systems -- Requirements for regulatory purposes
Health, medicine and laboratory equipment ISO/TC 210
ISO 13504:2012
Dentistry -- General requirements for instruments and related accessories used in dental implant placement and treatment
Health, medicine and laboratory equipment ISO/TC 106/SC 4
ISO 13666 [Under development]
Ophthalmic optics -- Spectacle lenses -- Vocabulary
Special technologies ISO/TC 172/SC 7
ISO 13897:2018
Dentistry -- Dental amalgam reusable mixing-capsules
Health, medicine and laboratory equipment ISO/TC 106/SC 6
ISO 14001:2015
Environmental management systems -- Requirements with guidance for use
Sustainability and environment ISO/TC 207/SC 1
ISO/CD 14091 [Under development]
Adaptation to climate change -- Vulnerability, impacts and risk assessment
Sustainability and environment ISO/TC 207/SC 7
ISO/AWI TS 14092 [Under development]
GHG Management & related activities: requirement & guidance of adaptation planning for organizations including local governments and communities
Sustainability and environment ISO/TC 207/SC 7
ISO 14242-2:2016
Implants for surgery -- Wear of total hip-joint prostheses -- Part 2: Methods of measurement
Health, medicine and laboratory equipment ISO/TC 150/SC 4
ISO 14375:2018
Child-resistant non-reclosable packaging for pharmaceutical products -- Requirements and testing
Freight, packaging and distribution ISO/TC 122/SC 3
ISO 14442:2006
Water quality -- Guidelines for algal growth inhibition tests with poorly soluble materials, volatile compounds, metals and waste water
Sustainability and environment ISO/TC 147/SC 5
ISO 14534:2011
Ophthalmic optics -- Contact lenses and contact lens care products -- Fundamental requirements
Special technologies ISO/TC 172/SC 7
ISO 14607:2018
Non-active surgical implants -- Mammary implants -- Particular requirements
Health, medicine and laboratory equipment ISO/TC 150
ISO 14630:2012
Non-active surgical implants -- General requirements
Health, medicine and laboratory equipment ISO/TC 150
ISO 14889:2013
Ophthalmic optics -- Spectacle lenses -- Fundamental requirements for uncut finished lenses
Special technologies ISO/TC 172/SC 7
ISO 15089:2000
Water quality -- Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents
Sustainability and environment ISO/TC 147/SC 2
ISO 16000-1:2004
Indoor air -- Part 1: General aspects of sampling strategy
Sustainability and environment ISO/TC 146/SC 6
ISO/CD 16061 [Under development]
Instrumentation for use in association with non-active surgical implants -- General requirements
Health, medicine and laboratory equipment ISO/TC 150
ISO 16075-1:2015
Guidelines for treated wastewater use for irrigation projects -- Part 1: The basis of a reuse project for irrigation
Sustainability and environment ISO/TC 282/SC 1
ISO 16128-2:2017
Cosmetics -- Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients -- Part 2: Criteria for ingredients and products
Health, medicine and laboratory equipment ISO/TC 217
ISO 16408:2015
Dentistry -- Oral care products -- Oral rinses
Health, medicine and laboratory equipment ISO/TC 106/SC 7
ISO 16665:2014
Water quality -- Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
Sustainability and environment ISO/TC 147/SC 5
ISO 16840-3:2014
Wheelchair seating -- Part 3: Determination of static, impact and repetitive load strengths for postural support devices
Health, medicine and laboratory equipment ISO/TC 173/SC 1
ISO 17294-1:2004
Water quality -- Application of inductively coupled plasma mass spectrometry (ICP-MS) -- Part 1: General guidelines
Sustainability and environment ISO/TC 147/SC 2
ISO/TS 17306:2016
Petroleum products -- Biodiesel -- Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography
Energy ISO/TC 28/SC 7
ISO/TS 17307:2016
Petroleum products -- Biodiesel -- Determination of total esters content by gas chromatography
Energy ISO/TC 28/SC 7
ISO 17351:2013
Packaging -- Braille on packaging for medicinal products
Freight, packaging and distribution ISO/TC 122
ISO 17480:2015
Packaging -- Accessible design -- Ease of opening
Freight, packaging and distribution ISO/TC 122
ISO 18369-1:2017
Ophthalmic optics -- Contact lenses -- Part 1: Vocabulary, classification system and recommendations for labelling specifications
Special technologies ISO/TC 172/SC 7
ISO 18400-104:2018
Soil quality -- Sampling -- Part 104: Strategies
Sustainability and environment ISO/TC 190/SC 2
ISO 18400-202:2018
Soil quality -- Sampling -- Part 202: Preliminary investigations
Sustainability and environment ISO/TC 190/SC 2
ISO 18400-203:2018
Soil quality -- Sampling -- Part 203: Investigation of potentially contaminated sites
Sustainability and environment ISO/TC 190/SC 2
ISO 18400-205:2018
Soil quality -- Sampling -- Part 205: Guidance on the procedure for investigation of natural, near-natural and cultivated sites
Sustainability and environment ISO/TC 190/SC 2
ISO 18778:2005
Respiratory equipment -- Infant monitors -- Particular requirements
Health, medicine and laboratory equipment ISO/TC 121/SC 3
ISO 19160-1:2015
Addressing -- Part 1: Conceptual model
Information technology, graphics and photography ISO/TC 211
ISO/NP 19694-1 [Under development]
Stationary source emissions -- Determination of greenhouse gas (GHG) emissions in energy-intensive industries -- Part 1: General aspects
Sustainability and environment ISO/TC 207/SC 7
ISO/DIS 19698 [Under development]
Sludge recovery, recycling, treatment and disposal -- Beneficial use of biosolids -- Land applications
Sustainability and environment ISO/TC 275
ISO 19809:2017
Packaging -- Accessible design -- Information and marking
Freight, packaging and distribution ISO/TC 122
ISO 19867-1:2018
Clean cookstoves and clean cooking solutions -- Harmonized laboratory test protocols -- Part 1: Standard test sequence for emissions and performance, safety and durability
Sustainability and environment ISO/TC 285
ISO/TR 19867-3:2018
Clean cookstoves and clean cooking solutions -- Harmonized laboratory test protocols -- Part 3: Voluntary performance targets for cookstoves based on laboratory testing
Sustainability and environment ISO/TC 285
ISO/DIS 19869 [Under development]
Clean cookstoves and clean cooking solutions -- Guidance on field testing methods for cookstoves
Sustainability and environment ISO/TC 285
ISO/NP TR 19915 [Under development]
Clean cookstoves and clean cooking solutions -- Guidelines for social impact assessment
Sustainability and environment ISO/TC 285
ISO 20072:2009
Aerosol drug delivery device design verification -- Requirements and test methods
Health, medicine and laboratory equipment ISO/TC 84
ISO 20121:2012
Event sustainability management systems -- Requirements with guidance for use
ISO/TMBG
ISO/CD 20126 [Under development]
Dentistry -- Manual toothbrushes -- General requirements and test methods
Health, medicine and laboratory equipment ISO/TC 106/SC 7
ISO/DIS 20424 [Under development]
Fatty acid methyl esters (FAME) -- Determination of sulfur content -- Inductively coupled plasma optical emission spectrometry (ICP-OES) method
Energy ISO/TC 28/SC 7
ISO 20519:2017
Ships and marine technology -- Specification for bunkering of liquefied natural gas fuelled vessels
Transport ISO/TC 8
ISO 20581:2016
Workplace air -- General requirements for the performance of procedures for the measurement of chemical agents
Sustainability and environment ISO/TC 146/SC 2
ISO/DIS 20695 [Under development]
Enteral feeding systems -- Design and testing
Health, medicine and laboratory equipment ISO/TC 84
ISO 20696:2018
Sterile urethral catheters for single use
Health, medicine and laboratory equipment ISO/TC 84
ISO 20697:2018
Sterile drainage catheters and accessory devices for single use
Health, medicine and laboratory equipment ISO/TC 84
ISO 20698:2018
Catheter systems for neuraxial application -- Sterile and single-use catheters and accessories
Health, medicine and laboratory equipment ISO/TC 84
ISO 20749:2017
Dentistry -- Pre-capsulated dental amalgam
Health, medicine and laboratory equipment ISO/TC 106/SC 1
ISO 20760-2:2017
Water reuse in urban areas -- Guidelines for centralized water reuse system -- Part 2: Management of a centralized water reuse system
Sustainability and environment ISO/TC 282/SC 2
ISO/DIS 20951 [Under development]
Soil Quality -- Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere
Sustainability and environment ISO/TC 190
ISO/TR 21276:2018
Clean cookstoves and clean cooking solutions -- Vocabulary
Sustainability and environment ISO/TC 285
ISO 21534:2007
Non-active surgical implants -- Joint replacement implants -- Particular requirements
Health, medicine and laboratory equipment ISO/TC 150/SC 4
ISO 21535:2007
Non-active surgical implants -- Joint replacement implants -- Specific requirements for hip-joint replacement implants
Health, medicine and laboratory equipment ISO/TC 150/SC 4
ISO 21536:2007
Non-active surgical implants -- Joint replacement implants -- Specific requirements for knee-joint replacement implants
Health, medicine and laboratory equipment ISO/TC 150/SC 4
ISO 21649:2006
Needle-free injectors for medical use -- Requirements and test methods
Health, medicine and laboratory equipment ISO/TC 84
ISO 22112:2017
Dentistry -- Artificial teeth for dental prostheses
Health, medicine and laboratory equipment ISO/TC 106/SC 2
ISO 22319:2017
Security and resilience -- Community resilience -- Guidelines for planning the involvement of spontaneous volunteers
Security, safety and risk ISO/TC 292
ISO 22715:2006
Cosmetics -- Packaging and labelling
Health, medicine and laboratory equipment ISO/TC 217
ISO 22716:2007
Cosmetics -- Good Manufacturing Practices (GMP) -- Guidelines on Good Manufacturing Practices
Health, medicine and laboratory equipment ISO/TC 217
ISO/AWI 23306 [Under development]
Specification of liquefied natural gas as a fuel for marine applications
Energy ISO/TC 28/SC 4
ISO 23907-1 [Under development]
Sharps injury protection -- Requirements and test methods -- Part 1: Single-use sharps containers
Health, medicine and laboratory equipment ISO/TC 84
ISO 23908:2011
Sharps injury protection -- Requirements and test methods -- Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
Health, medicine and laboratory equipment ISO/TC 84
ISO/FDIS 24508 [Under development]
Ergonomics -- Accessible design -- Guidelines for designing tactile symbols and letters
Health, medicine and laboratory equipment ISO/TC 159/SC 4
ISO/DIS 24509 [Under development]
Ergonomics -- Accessible design -- A method for estimating minimum legible font size for people at any age
Health, medicine and laboratory equipment ISO/TC 159/SC 4
ISO 24510:2007
Activities relating to drinking water and wastewater services -- Guidelines for the assessment and for the improvement of the service to users
Services ISO/TC 224
ISO 24511:2007
Activities relating to drinking water and wastewater services -- Guidelines for the management of wastewater utilities and for the assessment of wastewater services
Services ISO/TC 224
ISO 24512:2007
Activities relating to drinking water and wastewater services -- Guidelines for the management of drinking water utilities and for the assessment of drinking water services
Services ISO/TC 224
ISO 24521:2016
Activities relating to drinking water and wastewater services -- Guidelines for the management of basic on-site domestic wastewater services
Services ISO/TC 224
ISO 25841:2017
Female condoms -- Requirements and test methods
Health, medicine and laboratory equipment ISO/TC 157
ISO/DTS 26030 [Under development]
Sustainable development and social responsibility -- Guidance for using ISO 26000:2010 in the food chain
Food and agriculture ISO/TC 34
ISO 26825:2008
Anaesthetic and respiratory equipment -- User-applied labels for syringes containing drugs used during anaesthesia -- Colours, design and performance
Health, medicine and laboratory equipment ISO/TC 121/SC 1
ISO/FDIS 27020 [Under development]
Dentistry -- Brackets and tubes for use in orthodontics
Health, medicine and laboratory equipment ISO/TC 106/SC 1
ISO 28158:2018
Dentistry -- Integrated dental floss and handles
Health, medicine and laboratory equipment ISO/TC 106/SC 7
ISO 28862:2018
Packaging -- Child-resistant packaging -- Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
Freight, packaging and distribution ISO/TC 122/SC 3
ISO 30500:2018
Non-sewered sanitation systems -- Prefabricated integrated treatment units -- General safety and performance requirements for design and testing
Sustainability and environment ISO/PC 305
ISO 31000:2018
Risk management -- Guidelines
Security, safety and risk ISO/TC 262
ISO 37101:2016
Sustainable development in communities -- Management system for sustainable development -- Requirements with guidance for use
Sustainability and environment ISO/TC 268
ISO 37120:2018
Sustainable cities and communities -- Indicators for city services and quality of life
Sustainability and environment ISO/TC 268
ISO/DIS 37122 [Under development]
Sustainable cities and communities -- Indicators for smart cities
Sustainability and environment ISO/TC 268
ISO/DIS 37123 [Under development]
Sustainable cities and communities -- Indicators for resilient cities
Sustainability and environment ISO/TC 268
ISO 39001:2012
Road traffic safety (RTS) management systems -- Requirements with guidance for use
Transport ISO/TC 241
ISO 45001:2018
Occupational health and safety management systems -- Requirements with guidance for use
Security, safety and risk ISO/TC 283
ISO/DIS 80601-2-12.2 [Under development]
Medical electrical equipment -- Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
Health, medicine and laboratory equipment ISO/TC 121/SC 3
ISO 80601-2-13:2011
Medical electrical equipment -- Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
Health, medicine and laboratory equipment ISO/TC 121/SC 1
ISO 80601-2-55:2018
Medical electrical equipment -- Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
Health, medicine and laboratory equipment ISO/TC 121/SC 1
ISO 80601-2-56:2017
Medical electrical equipment -- Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
Health, medicine and laboratory equipment ISO/TC 121/SC 3
ISO 80601-2-61:2017
Medical electrical equipment -- Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
Health, medicine and laboratory equipment ISO/TC 121/SC 3
ISO 80601-2-67:2014
Medical electrical equipment -- Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment
Health, medicine and laboratory equipment ISO/TC 121/SC 3
ISO/CD 80601-2-67 [Under development]
Medical electrical equipment -- Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment
Health, medicine and laboratory equipment ISO/TC 121/SC 3
ISO 80601-2-69:2014
Medical electrical equipment -- Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment
Health, medicine and laboratory equipment ISO/TC 121/SC 3
ISO/CD 80601-2-69 [Under development]
Medical electrical equipment -- Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment
Health, medicine and laboratory equipment ISO/TC 121/SC 3
ISO 80601-2-70:2015
Medical electrical equipment -- Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment
Health, medicine and laboratory equipment ISO/TC 121/SC 3
ISO/CD 80601-2-70 [Under development]
Medical electrical equipment -- Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment
Health, medicine and laboratory equipment ISO/TC 121/SC 3