This standard was last reviewed and confirmed in 2021. Therefore this version remains current.
ISO 11119-4:2016 specifies requirements for composite gas cylinders with load-sharing welded liners between 0,5 l and 150 l water capacity and a maximum test pressure of 450 bar for the storage and conveyance of compressed or liquefied gases.
NOTE 1 1 bar = 105Pa = 105N/m2.
The cylinders are constructed in the form of a welded stainless steel liner or welded ferritic steel liner or welded aluminium alloy liner and overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix to provide longitudinal and circumferential reinforcement.
The cylinders in this part of ISO 11119 are type 3 fully wrapped cylinders with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends.
Cylinders produced in accordance with this part of ISO 11119 have a minimum design life of 15 years. Cylinders with test pressure of up to 60 bar have an unlimited design life.
ISO 11119-4:2016 does not address the design, fitting, and performance of removable protective sleeves.
ISO 11119-4:2016 does not apply to cylinders with seamless liners. For seamless liners, ISO 11119‑2 applies.
NOTE 2 ISO 11623 covers periodic inspection and re-testing of composite cylinders.
Status : PublishedPublication date : 2016-02
Edition : 1Number of pages : 40
Technical Committee:Cylinder design
Buy this standard