• Filter:

  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 164/SC 1 Secretariat Stage ICS
ISO/TTA 2:1997
Tensile tests for discontinuously reinforced metal matrix composites at ambient temperatures
60.60
ISO/TTA 5:2007
Code of practice for creep/fatigue testing of cracked components
60.60
ISO 82:1974
Steel — Tensile testing
95.99
ISO 86:1974
Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick
95.99
ISO 89:1974
Steel — Tensile testing of wire
95.99
ISO/R 147:1960
Load calibration of testing machines for tensile testing of steel
95.99
ISO/R 190:1961
Tensile testing of light metals and their alloys
95.99
ISO/R 203:1961
Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)
95.99
ISO 204:1997
Metallic materials — Uninterrupted uniaxial creep testing in tension — Method of test
95.99
ISO 204:2009
Metallic materials — Uniaxial creep testing in tension — Method of test
95.99
ISO 204:2018
Metallic materials — Uniaxial creep testing in tension — Method of test
60.60
ISO/R 204:1961
Non-interrupted creep testing of steel at elevated temperatures
95.99
ISO/R 206:1961
Creep stress rupture testing of steel at elevated temperatures
95.99
ISO 375:1974
Steel — Tensile testing of tubes
95.99
ISO 376:1987
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99
ISO 376:1999
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99
ISO 376:2004
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99
ISO 376:2011
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
90.93
ISO/R 376:1964
Calibration of elastic proving devices
95.99
ISO/R 400:1964
Tensile testing of copper and copper alloys
95.99
ISO/R 401:1964
Tensile testing of copper and copper alloy tubes of circular section
95.99
ISO/R 402:1964
Tensile testing of copper and copper alloy wire
95.99
ISO 783:1989
Metallic materials — Tensile testing at elevated temperature
95.99
ISO 783:1999
Metallic materials — Tensile testing at elevated temperature
95.99
ISO/R 783:1968
Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
95.99
ISO/R 952:1969
Tensile testing of light metal and light metal alloy tubes
95.99
ISO/R 956:1969
Tensile test for light metal and light metal alloy wires
95.99
ISO/R 1555:1971
Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) — Tensile test
95.99
ISO 2573:1977
Tensile testing systems — Determination of K-value
95.99
ISO 6892-1
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
60.00
ISO 6892-1:2009
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
95.99
ISO 6892-1:2016
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
90.92
ISO 6892-2:2011
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
95.99
ISO 6892-2:2018
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
60.60
ISO 6892-3:2015
Metallic materials — Tensile testing — Part 3: Method of test at low temperature
60.60
ISO 6892-4:2015
Metallic materials — Tensile testing — Part 4: Method of test in liquid helium
60.60
ISO 6892:1984
Metallic materials — Tensile testing
95.99
ISO 6892:1998
Metallic materials — Tensile testing at ambient temperature
95.99
ISO/AWI TR 6892-5
Metallic materials — Tensile testing — Part 5: Guideline for testing miniaturised test pieces
20.00
ISO 7500-1:1986
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tensile testing machines
95.99
ISO 7500-1:1999
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
95.99
ISO 7500-1:2004
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
95.99
ISO 7500-1:2004/Cor 1:2008
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system — Technical Corrigendum 1
95.99
ISO 7500-1:2015
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
95.99
ISO 7500-1:2018
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
60.60
ISO 7500-2:1996
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied load
95.99
ISO 7500-2:2006
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied force
90.93
ISO 9513:1989
Metallic materials — Verification of extensometers used in uniaxial testing
95.99
ISO 9513:1999
Metallic materials — Calibration of extensometers used in uniaxial testing
95.99
ISO 9513:1999/Cor 1:2000
Metallic materials — Calibration of extensometers used in uniaxial testing — Technical Corrigendum 1
95.99
ISO 9513:2012
Metallic materials — Calibration of extensometer systems used in uniaxial testing
90.93
ISO 9513:2012/Cor 1:2013
Metallic materials — Calibration of extensometer systems used in uniaxial testing — Technical Corrigendum 1
60.60
ISO/WD TR 15263
Mechanical tests on metallic materials — Evaluation of uncertainties in tensile testing
20.98
ISO/WD TR 15264
Mechanical tests on metallic materials — Evaluation of uncertainties in creep testing
20.98
ISO 15579:2000
Metallic materials — Tensile testing at low temperature
95.99
ISO 19819:2004
Metallic materials — Tensile testing in liquid helium
95.99
ISO 26203-1:2010
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
95.99
ISO 26203-1:2018
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
60.60
ISO 26203-2:2011
Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems
90.93

No matching records found. Please try changing the filter settings.