| Subcommittee | Subcommittee Title | Published standards | Standards under development |
|---|---|---|---|
| ISO/TC 138/SC 1 | Plastics pipes and fittings for soil, waste and drainage (including land drainage) | 36 | 5 |
| ISO/TC 138/SC 2 | Plastics pipes and fittings for water supplies | 72 | 7 |
| ISO/TC 138/SC 3 | Plastics pipes and fittings for industrial applications | 11 | 2 |
| ISO/TC 138/SC 4 | Plastics pipes and fittings for the supply of gaseous fuels | 35 | 9 |
| ISO/TC 138/SC 5 | General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications | 95 | 7 |
| ISO/TC 138/SC 6 | Reinforced plastics pipes and fittings for all applications | 31 | 6 |
| ISO/TC 138/SC 7 | Valves and auxiliary equipment of plastics materials | 12 | 7 |
| ISO/TC 138/SC 8 | Rehabilitation of pipeline systems | 18 | 1 |
| Standard and/or project under the direct responsibility of ISO/TC 138 Secretariat | Stage | ICS |
|---|---|---|
|
ISO/DATA 5:1978 [Withdrawn]
Title missing
|
95.99 | |
|
ISO/DATA 6:1974 [Withdrawn]
Title missing
|
95.99 | |
|
ISO/DATA 7:1979 [Withdrawn]
Title missing
|
95.99 | |
|
ISO/DATA 8:1979 [Withdrawn]
Title missing
|
95.99 | |
|
ISO 161-1:1978 [Withdrawn]
Thermoplastics pipes for the transport of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series
|
95.99 | |
|
ISO 161-1:1996 [Withdrawn]
Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series
|
95.99 | |
|
Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series
|
60.60 | |
|
ISO 161-2:1977 [Withdrawn]
Thermoplastic pipes for the transport of fluids -- Nominal outside diameters and nominal pressures -- Part 2: Inch series
|
95.99 | |
|
Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 2: Inch-based series
|
90.20 | |
|
ISO/R 265:1962 [Withdrawn]
Pipes and fittings of plastics materials -- Socket fittings with spigot ends for domestic and industrial waste pipes -- Basic dimensions : Metric series
|
95.99 | |
|
ISO/R 330:1963 [Withdrawn]
Withdrawal of ISO/R 330-1963
|
95.99 | |
|
ISO 580:1973 [Withdrawn]
Moulded fittings in unplasticized polyvinyl chloride (PVC) for use under pressure -- Oven test
|
95.99 | |
|
ISO 727:1979 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure -- Dimensions of sockets -- Metric series
|
95.99 | |
|
ISO/R 1164:1970 [Withdrawn]
Withdrawal of ISO/R 1164-1970
|
95.99 | |
|
ISO/R 1165:1970 [Withdrawn]
Withdrawal of ISO/R 1165-1970
|
95.99 | |
|
ISO/R 1166:1970 [Withdrawn]
Withdrawal of ISO/R 1166-1970
|
95.99 | |
|
ISO 1167:1973 [Withdrawn]
Plastics pipes for the transport of fluids -- Determination of the resistance to internal pressure
|
95.99 | |
|
ISO/R 1330:1970 [Withdrawn]
Withdrawal of ISO/R 1330-1970
|
95.99 | |
|
ISO 2043:1974 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure -- Oven test
|
95.99 | |
|
ISO 2045:1973 [Withdrawn]
Single sockets for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement
|
95.99 | |
|
ISO 2048:1973 [Withdrawn]
Double socket fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement
|
95.99 | |
|
ISO 2056:1976 [Withdrawn]
Withdrawal of ISO 2056-1976
|
95.99 | |
|
ISO 3127:1980 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) pipes for the transport of fluids -- Determination and specification of resistance to external blows
|
95.99 | |
|
ISO 3213:1975 [Withdrawn]
Polypropylene pipes -- Reduction of permissible stress as a function of time and temperature
|
95.99 | |
|
ISO 3478:1975 [Withdrawn]
Polypropylene (PP) pipes -- Determination of longitudinal reversion
|
95.99 | |
|
ISO 3606:1976 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) pipes -- Tolerances on outside diameters and wall thicknesses
|
95.99 | |
|
ISO 3607:1977 [Withdrawn]
Polyethylene (PE) pipes -- Tolerances on outside diameters and wall thicknesses
|
95.99 | |
|
ISO 3608:1976 [Withdrawn]
Chlorinated polyvinyl chloride (CPVC) pipes -- Tolerances on outside diameters and wall thicknesses
|
95.99 | |
|
ISO 3609:1977 [Withdrawn]
Polypropylene (PP) pipes -- Tolerances on outside diameters and wall thicknesses
|
95.99 | |
|
ISO 4056:1978 [Withdrawn]
Polyethylene (PE) pipes and fittings -- Designation of polyethylene, based on nominal density and melt flow index
|
95.99 | |
|
ISO 4065:1978 [Withdrawn]
Thermoplastic pipes -- Universal wall thickness table
|
95.99 | |
|
ISO 4065:1996 [Withdrawn]
Thermoplastics pipes -- Universal wall thickness table
|
95.99 | |
|
Thermoplastics pipes -- Universal wall thickness table
|
60.60 | |
|
ISO 4440:1980 [Withdrawn]
Polyethylene (PE) pipes and fittings -- Determination of melt flow rate
|
95.99 | |
|
ISO/TR 6285:1980 [Withdrawn]
Pipes and fittings of acrylonitrile/butadiene/ styrene terpolymer (ABS) -- Chemical resistance with respect to fluids
|
95.99 | |
|
ISO/TR 7471:1981 [Withdrawn]
Polypropylene (PP) pipes and fittings -- Chemical resistance with respect to fluids
|
95.99 | |
|
ISO/TR 7472:1981 [Withdrawn]
Low density polyethylene pipes and fittings -- Chemical resistance with respect to fluids
|
95.99 | |
|
ISO/TR 7473:1981 [Withdrawn]
Unplasticized polyvinyl chloride pipes and fittings -- Chemical resistance with respect to fluids
|
95.99 | |
|
ISO/TR 7474:1981 [Withdrawn]
High density polyethylene pipes and fittings -- Chemical resistance with respect to fluids to be conveyed
|
95.99 | |
|
ISO/TR 11295:1992 [Withdrawn]
Techniques for rehabilitation of pipeline sytems by the use of plastics pipes and fittings
|
95.99 | |
|
ISO 11922-1:1997 [Withdrawn]
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series
|
95.99 | |
|
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series
|
60.60 | |
|
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 2: Inch-based series
|
90.20 | |
|
Thermoplastics pipes and fittings -- Nominal ring stiffnesses
|
90.20 |
No matching records found