Subcommittee | Subcommittee Title | Published standards | Standards under development |
---|---|---|---|
ISO/TC 107/SC 3 | Electrodeposited coatings and related finishes | 25 | 2 |
ISO/TC 107/SC 4 | Hot dip coatings (galvanized, etc.) | 6 | 1 |
ISO/TC 107/SC 7 | Corrosion tests | 14 | 0 |
ISO/TC 107/SC 8 | Chemical conversion coatings | 5 | 1 |
ISO/TC 107/SC 9 | Physical vapor deposition coatings | 2 | 1 |
Standard and/or project under the direct responsibility of ISO/TC 107 Secretariat | Stage | ICS |
---|---|---|
ISO 1463:1982 [Withdrawn]
Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method
|
95.99 | |
Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method
|
90.20 | |
ISO 2063:1973 [Withdrawn]
Metallic coatings -- Protection of iron and steel against corrosion -- Metal spraying of zinc and aluminium
|
95.99 | |
ISO 2063:1991 [Withdrawn]
Metallic and other inorganic coatings -- Thermal spraying -- Zinc, aluminium and their alloys
|
95.99 | |
ISO 2063:2005 [Withdrawn]
Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys
|
95.99 | |
ISO 2063-1:2017 [Withdrawn]
Thermal spraying -- Zinc, aluminium and their alloys -- Part 1: Design considerations and quality requirements for corrosion protection systems
|
95.99 | |
Thermal spraying -- Zinc, aluminium and their alloys -- Part 1: Design considerations and quality requirements for corrosion protection systems
|
60.60 | |
Thermal spraying -- Zinc, aluminium and their alloys -- Part 2: Execution of corrosion protection systems
|
60.60 | |
ISO 2064:1980 [Withdrawn]
Metallic and other non-organic coatings -- Definitions and conventions concerning the measurement of thickness
|
95.99 | |
Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness
|
90.20 | |
ISO 2079:1981 [Withdrawn]
Surface treatment and metallic coatings -- General classification of terms
|
95.99 | |
ISO 2080:1981 [Withdrawn]
Electroplating and related processes -- Vocabulary
|
95.99 | |
Metallic and other inorganic coatings -- Surface treatment, metallic and other inorganic coatings -- Vocabulary
|
90.92 | |
ISO/CD 2080 [Under development]
Metallic and other inorganic coatings -- Surface treatment, metallic and other inorganic coatings -- Vocabulary
|
30.00 | |
ISO 2177:1972 [Withdrawn]
Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution
|
95.99 | |
ISO 2177:1985 [Withdrawn]
Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution
|
95.99 | |
Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution
|
90.20 | |
ISO 2178:1982 [Withdrawn]
Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness -- Magnetic method
|
95.99 | |
Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness -- Magnetic method
|
60.60 | |
ISO 2360:1982 [Withdrawn]
Non-conductive coatings on non-magnetic basis metals -- Measurement of coating thickness -- Eddy current method
|
95.99 | |
ISO 2360:2003 [Withdrawn]
Non-conductive coatings on non-magnetic electrically conductive basis materials -- Measurement of coating thickness -- Amplitude-sensitive eddy-current method
|
95.99 | |
Non-conductive coatings on non-magnetic electrically conductive base metals -- Measurement of coating thickness -- Amplitude-sensitive eddy-current method
|
60.60 | |
Electrodeposited nickel coatings on magnetic and non-magnetic substrates -- Measurement of coating thickness -- Magnetic method
|
90.20 | |
ISO 2722:1973 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to citric acid at room temperature
|
95.99 | |
ISO 2722:1997 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to citric acid at room temperature
|
95.99 | |
ISO 2723:1973 [Withdrawn]
Vitreous and porcelain enamels for sheet steel -- Production of specimens for testing
|
95.99 | |
ISO 2723:1995 [Withdrawn]
Vitreous and porcelain enamels for sheet steel -- Production of specimens for testing
|
95.99 | |
ISO 2724:1973 [Withdrawn]
Vitreous and porcelain enamels for cast iron -- Production of specimens for testing
|
95.99 | |
ISO 2733:1983 [Withdrawn]
Vitreous and porcelain enamels -- Apparatus for testing with acid and neutral liquids and their vapours
|
95.99 | |
ISO 2734:1983 [Withdrawn]
Vitreous and porcelain enamels -- Apparatus for testing with alkaline liquids
|
95.99 | |
ISO 2734:1997 [Withdrawn]
Vitreous and porcelain enamels -- Apparatus for testing with alkaline liquids
|
95.99 | |
ISO 2742:1983 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to boiling citric acid
|
95.99 | |
ISO 2742:1998 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to boiling citric acid
|
95.99 | |
ISO 2743:1973 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to boiling hydrochloric acid
|
95.99 | |
ISO 2743:1986 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to condensing hydrochloric acid vapour
|
95.99 | |
ISO 2744:1983 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to boiling water and water vapour
|
95.99 | |
ISO 2744:1998 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to boiling water and water vapour
|
95.99 | |
ISO 2745:1973 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to hot sodium hydroxide
|
95.99 | |
ISO 2745:1998 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to hot sodium hydroxide
|
95.99 | |
ISO 2746:1973 [Withdrawn]
Vitreous and porcelain enamels -- Enamelled articles for service under highly corrosive conditions -- High voltage test
|
95.99 | |
ISO 2746:1998 [Withdrawn]
Vitreous and porcelain enamels -- Enamelled articles for service under highly corrosive conditions -- High voltage test
|
95.99 | |
Vitreous and porcelain enamels -- High voltage test
|
60.60 | |
ISO 2747:1973 [Withdrawn]
Vitreous and porcelain enamels -- Enamelled cooking utensils -- Determination of resistance to thermal shock
|
95.99 | |
Vitreous and porcelain enamels -- Enamelled cooking utensils -- Determination of resistance to thermal shock
|
90.93 | |
ISO 2819:1980 [Withdrawn]
Metallic coatings on metallic substrates -- Electrodeposited and chemically deposited coatings -- Review of methods available for testing adhesion
|
95.99 | |
Metallic coatings on metallic substrates -- Electrodeposited and chemically deposited coatings -- Review of methods available for testing adhesion
|
60.60 | |
ISO 3497:1976 [Withdrawn]
Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
|
95.99 | |
ISO 3497:1990 [Withdrawn]
Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
|
95.99 | |
Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
|
90.93 | |
ISO 3543:1981 [Withdrawn]
Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method
|
95.99 | |
Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method
|
90.93 | |
60.60 | ||
ISO 3613:1980 [Withdrawn]
Chromate conversion coatings on zinc and cadmium -- Test methods
|
95.99 | |
ISO 3613:2000 [Withdrawn]
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys -- Test methods
|
95.99 | |
Metallic and other inorganic coatings -- Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys -- Test methods
|
90.60 | |
Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method
|
90.20 | |
ISO 3882:1976 [Withdrawn]
Metallic and other non-organic coatings -- Review of methods of measurement of thickness
|
95.99 | |
ISO 3882:1986 [Withdrawn]
Metallic and other non-organic coatings -- Review of methods of measurement of thickness
|
95.99 | |
Metallic and other inorganic coatings -- Review of methods of measurement of thickness
|
90.93 | |
ISO 3892:1980 [Withdrawn]
Conversion coatings on metallic materials -- Determination of coating mass per unit area -- Gravimetric methods
|
95.99 | |
Conversion coatings on metallic materials -- Determination of coating mass per unit area -- Gravimetric methods
|
90.93 | |
ISO 4516:1980 [Withdrawn]
Metallic and related coatings -- Vickers and Knoop microhardness tests
|
95.99 | |
Metallic coatings -- Measurement of coating thickness -- Profilometric method
|
90.20 | |
Electrodeposited metallic coatings and related finishes -- Sampling procedures for inspection by attributes
|
90.20 | |
ISO 4528:2000 [Withdrawn]
Vitreous and porcelain enamel finishes -- Selection of test methods for vitreous and porcelain enamelled areas of articles
|
95.99 | |
Vitreous and porcelain enamel finishes -- Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
|
60.60 | |
Vitreous and porcelain enamelled manufactured articles -- Determination of resistance to heat
|
90.93 | |
Vitreous and porcelain enamels -- Release from enamelled articles in contact with food -- Methods of test and limits
|
60.60 | |
ISO 4531-1:1998 [Withdrawn]
Vitreous and porcelain enamels -- Release of lead and cadmium from enamelled ware in contact with food -- Part 1: Method of test
|
95.99 | |
ISO 4531-2:1998 [Withdrawn]
Vitreous and porcelain enamels -- Release of lead and cadmium from enamelled ware in contact with food -- Part 2: Permissible limits
|
95.99 | |
Vitreous and porcelain enamels -- Determination of the resistance of enamelled articles to impact -- Pistol test
|
90.93 | |
ISO 4533:1983 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to hot detergent solutions used for washing textiles
|
95.99 | |
ISO 4534:1980 [Withdrawn]
Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test
|
95.99 | |
Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test
|
90.93 | |
ISO 4535:1983 [Withdrawn]
Vitreous and porcelain enamels -- Apparatus for determination of resistance to hot detergent solutions used for washing textiles
|
95.99 | |
Vitreous and porcelain enamels -- Determination of the resistance to abrasion -- Part 1: Abrasion testing apparatus
|
90.93 | |
ISO 6370-2:1991 [Withdrawn]
Vitreous and porcelain enamels -- Determination of the resistance to abrasion -- Part 2: Loss in mass after sub-surface abrasion
|
95.99 | |
Vitreous and porcelain enamels -- Determination of the resistance to abrasion -- Part 2: Loss in mass after sub-surface abrasion
|
90.92 | |
ISO/DIS 6370-2 [Under development]
Vitreous and porcelain enamels -- Determination of the resistance to abrasion -- Part 2: Loss in mass after sub-surface abrasion
|
40.20 | |
ISO 8289:1986 [Withdrawn]
Vitreous and porcelain enamels -- Low voltage test for detecting and locating defects
|
95.99 | |
Vitreous and porcelain enamels -- Low voltage test for detecting and locating defects
|
90.92 | |
ISO/DIS 8289-1 [Under development]
Vitreous and porcelain enamels -- Low voltage test for detecting and locating defects -- Part 1: Swab test for non-profiled surfaces
|
40.00 | |
ISO 8289-2 [Under development]
Vitreous and porcelain enamels -- Low-voltage test for detecting and locating defects -- Part 2: Slurry test for profiled surfaces
|
60.00 | |
ISO 8290:1987 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to sulfuric acid at room temperature
|
95.99 | |
ISO 8290:1998 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to sulfuric acid at room temperature
|
95.99 | |
Vitreous and porcelain enamels -- Method of test of self-cleaning properties
|
90.93 | |
ISO 8401:1986 [Withdrawn]
Metallic coatings -- Review of methods of measurement of ductility
|
95.99 | |
Metallic coatings -- Review of methods of measurement of ductility
|
60.60 | |
Metallic coatings -- Measurement of coating thickness -- Scanning electron microscope method
|
90.93 | |
ISO 10111:2000 [Withdrawn]
Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods
|
95.99 | |
Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods
|
60.60 | |
Metallic and other inorganic coatings -- Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods -- Inclined wedge method
|
90.93 | |
ISO 11177 [Under development]
Vitreous and porcelain enamels -- Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply -- Quality requirements and testing
|
60.00 | |
Vitreous and porcelain enamels -- Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply -- Quality requirements and testing
|
90.92 | |
Thermal spraying -- Components with thermally sprayed coatings -- Technical supply conditions
|
90.93 | |
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
|
90.92 | |
ISO/WD 12671 [Under development]
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
|
20.20 | |
Thermal spraying -- Recommendations for thermal spraying
|
90.93 | |
Metallic and other inorganic coatings -- Thermal spray coordination -- Tasks and responsibilities
|
90.93 | |
Metallic and other inorganic coatings -- Test method of cyclic heating for thermal-barrier coatings under temperature gradient
|
90.93 | |
ISO 13804:1999 [Withdrawn]
Vitreous and porcelain enamels for aluminium -- Production of specimens for testing
|
95.99 | |
Vitreous and porcelain enamels for aluminium -- Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
|
90.93 | |
ISO 13806:1999 [Withdrawn]
Vitreous and porcelain enamels -- Corrosion tests in closed systems
|
95.99 | |
Vitreous and porcelain enamels -- Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
|
90.93 | |
60.60 | ||
Metallic and other inorganic coatings -- Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method
|
90.93 | |
Metallic and other inorganic coatings -- Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
|
90.93 | |
Thermal spraying -- Acceptance inspection of thermal spraying equipment
|
90.93 | |
ISO 14232:2000 [Withdrawn]
Thermal spraying -- Powders -- Composition and technical supply conditions
|
95.99 | |
Thermal spraying -- Powders -- Part 1: Characterization and technical supply conditions
|
60.60 | |
Thermal spraying -- Powders -- Part 2: Comparison of coating performance and spray powder chemistry
|
60.60 | |
ISO 14916:1999 [Withdrawn]
Thermal spraying -- Determination of tensile adhesive strength
|
95.99 | |
Thermal spraying -- Determination of tensile adhesive strength
|
60.60 | |
ISO 14917:1999 [Withdrawn]
Thermal spraying -- Terminology, classification
|
95.99 | |
Thermal spraying -- Terminology, classification
|
60.60 | |
ISO 14918:1998 [Withdrawn]
Thermal spraying -- Approval testing of thermal sprayers
|
95.99 | |
Thermal spraying -- Qualification testing of thermal sprayers
|
60.60 | |
ISO 14919:2001 [Withdrawn]
Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions
|
95.99 | |
Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions
|
60.60 | |
ISO 14920:1999 [Withdrawn]
Thermal spraying -- Spraying and fusing of self-fluxing alloys
|
95.99 | |
Thermal spraying -- Spraying and fusing of self-fluxing alloys
|
60.60 | |
ISO 14921:2001 [Withdrawn]
Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components
|
95.99 | |
Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components
|
90.93 | |
Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 1: Guidance for selection and use
|
90.93 | |
Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements
|
90.93 | |
Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements
|
90.93 | |
Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements
|
90.93 | |
Thermal spraying -- Characterization and testing of thermally sprayed coatings
|
90.93 | |
Thermal spraying -- Post-treatment and finishing of thermally sprayed coatings
|
90.93 | |
Vitreous and porcelain enamels -- Determination of scratch resistance of enamel finishes
|
90.20 | |
60.60 | ||
Metallic and other inorganic coatings -- Electrochemical measurement of diffusible hydrogen in steels -- Barnacle electrode method
|
90.93 | |
Metallic and other inorganic coatings -- Definitions and conventions concerning appearance
|
90.93 | |
Thermal spraying -- Coatings for protection against corrosion and oxidation at elevated temperatures
|
90.93 | |
ISO 17836:2004 [Withdrawn]
Thermal spraying -- Determination of the deposition efficiency for thermal spraying
|
95.99 | |
Thermal spraying -- Determination of the deposition efficiency for thermal spraying
|
60.60 | |
Diamond-like carbon films -- Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
|
60.60 | |
Metallic and other inorganic coatings -- Determination of thermal conductivity of thermal barrier coatings
|
60.60 | |
Thermal spraying -- Classification method of adhesive strength by indentation
|
60.60 | |
Metallic and other inorganic coatings -- Measurement of Young's modulus of thermal barrier coatings by beam bending
|
60.60 | |
Vitreous and porcelain enamels -- Terminology -- Part 1: Terms and definitions
|
60.60 | |
Vitreous and porcelain enamels -- Terminology -- Part 2: Visual representations and descriptions
|
60.60 | |
Thermal spraying -- Determination of interfacial toughness of ceramic coatings by indentation
|
60.60 | |
Vitreous and porcelain enamels -- Preparation of samples and determination of thermal expansion coefficient
|
60.60 | |
Carbon based films -- Classification and designations
|
60.60 | |
Metallic and other inorganic coatings -- DC magnetron sputtered silver coatings for engineering purposes -- Measurement of coating adhesion
|
60.60 | |
Non-magnetic metallic coatings on metallic and non-metallic basis materials -- Measurement of coating thickness -- Phase-sensitive eddy-current method
|
90.92 | |
ISO/DIS 21968 [Under development]
Non-magnetic metallic coatings on metallic and non-metallic basis materials -- Measurement of coating thickness -- Phase-sensitive eddy-current method
|
40.60 | |
ISO/CD 22680 [Under development]
Metallic and other inorganic coatings- Measurement of linear thermal expansion coefficient of thermal barrier coatings
|
30.99 | |
ISO/AWI 23486 [Under development]
Metallic and other inorganic coatings- Measurement of Young’s modulus of thermal barrier coatings at elevated temperature by flexural resonance method
|
20.00 |
|
ISO/DTR 23487-1 [Under development]
Metallic and other inorganic coatings -- Corrosion protection of offshore wind turbines -- Part 1: Duplex coating of towers
|
30.60 | |
ISO/DTR 23487-2 [Under development]
Metallic and other inorganic coatings -- Corrosion protection of offshore wind turbines -- Part 2: Corrosion protection of foundation structures
|
30.60 | |
ISO 26945:2008 [Withdrawn]
Metallic and other inorganic coatings -- Electrodeposited coatings of tin-cobalt alloy
|
95.99 | |
Metallic and other inorganic coatings -- Electrodeposited coatings of tin-cobalt alloy
|
90.93 | |
Standard method for porosity measurement of thermally sprayed coatings
|
60.60 | |
Thermal spraying -- Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing
|
60.60 | |
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 1: Determination of resistance to chemical corrosion by acids at room temperature
|
90.93 | |
ISO 28706-2:2008 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours
|
95.99 | |
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
|
60.60 | |
ISO 28706-3:2008 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
|
95.99 | |
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle
|
60.60 | |
ISO 28706-4:2008 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
|
95.99 | |
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
|
60.60 | |
ISO 28706-5:2008 [Withdrawn]
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 5: Determination of resistance to chemical corrosion in closed systems
|
95.99 | |
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 5: Determination of resistance to chemical corrosion in closed systems
|
90.93 | |
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 1: Quality requirements for apparatus, components, appliances and accessories
|
90.92 | |
ISO/DIS 28721-1 [Under development]
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 1: Quality requirements for apparatus, components, appliances and accessories
|
40.99 | |
ISO 28721-2:2008 [Withdrawn]
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 2: Designation and specification of resistance to chemical attack and thermal shock
|
95.99 | |
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 2: Designation and specification of resistance to chemical attack and thermal shock
|
60.60 | |
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 3: Thermal shock resistance
|
90.93 | |
ISO 28721-4:2010 [Withdrawn]
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
|
95.99 | |
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
|
60.60 | |
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 5: Presentation and characterization of defects
|
60.60 | |
Vitreous and porcelain enamels -- Characteristics of enamel coatings applied to steel panels intended for architecture
|
90.93 | |
Vitreous and porcelain enamels -- Determination of the edge covering on enamelled steel plate to be used in heat exchangers
|
90.93 | |
ISO 28762:2008 [Withdrawn]
Vitreous and porcelain enamels -- Enamel coatings applied to steel for writing surfaces -- Specification
|
95.99 | |
Vitreous and porcelain enamels -- Enamel coatings applied to steel for writing surfaces -- Specification
|
90.93 | |
Vitreous and porcelain enamels -- Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers -- Specifications
|
90.92 | |
ISO/DIS 28763 [Under development]
Vitreous and porcelain enamels -- Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers -- Specifications
|
40.60 | |
ISO 28764:2008 [Withdrawn]
Vitreous and porcelain enamels -- Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
|
95.99 | |
Vitreous and porcelain enamels -- Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
|
60.60 | |
ISO 28765:2008 [Withdrawn]
Vitreous and porcelain enamels -- Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
|
95.99 | |
Vitreous and porcelain enamels -- Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
|
60.60 |
No matching records found