| Subcommittee | Subcommittee Title | Published standards | Standards under development |
|---|---|---|---|
| ISO/TC 82/SC 7 | Mine closure and reclamation management | 0 | 2 |
| Standard and/or project under the direct responsibility of ISO/TC 82 Secretariat | Stage | ICS |
|---|---|---|
|
ISO 610:1979 [Withdrawn]
High-tensile steel chains (round link) for chain conveyors and coal ploughs
|
95.99 | |
|
High-tensile steel chains (round link) for chain conveyors and coal ploughs
|
90.93 | |
|
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 1: General rules of representation
|
90.93 | |
|
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 2: Representation of sedimentary rocks
|
90.93 | |
|
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 3: Representation of magmatic rocks
|
90.93 | |
|
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 4: Representation of metamorphic rocks
|
90.93 | |
|
ISO 710-5:1982 [Withdrawn]
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 5: Representation of minerals
|
95.99 | |
|
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 5: Representation of minerals
|
90.93 | |
|
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering
|
90.93 | |
|
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 7: Tectonic symbols
|
90.93 | |
|
ISO 721:1974 [Withdrawn]
Rock drilling -- Integral stems
|
95.99 | |
|
Rock drilling equipment -- Integral stems
|
90.93 | |
|
ISO 722:1985 [Withdrawn]
Rock drilling -- Hollow hexagonal drill-steels in bar form
|
95.99 | |
|
Rock drilling equipment -- Hollow drill steels in bar form, hexagonal and round
|
90.93 | |
|
ISO 723:1974 [Withdrawn]
Rock drilling -- Forged collared shanks and chuck bushings for hollow hexagonal drill-steels
|
95.99 | |
|
Rock drilling equipment -- Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels
|
90.93 | |
|
ISO 1082:1984 [Withdrawn]
Mining -- Shackle type connector units for chain conveyors
|
95.99 | |
|
Mining -- Shackle type connector units for chain conveyors
|
90.93 | |
|
Rock drilling -- Rotary drill-rods and rotary drill-bits for dry drilling -- Connecting dimensions
|
90.93 | |
|
ISO 1718:1974 [Withdrawn]
Rock drilling -- Drill-rods and detachable bits for percussive drilling
|
95.99 | |
|
Rock drilling equipment -- Drill rods with tapered connection for percussive drilling
|
90.93 | |
|
ISO 1719:1974 [Withdrawn]
Rock drilling -- Extension drill-steel equipment for percussive long-hole drilling -- Rope-threaded equipments 7/8 to 1 1/4 in (22 to 32 mm)
|
95.99 | |
|
ISO 1720:1974 [Withdrawn]
Rock drilling -- Extension drill-steel equipment for percussive long-hole drilling -- Rope-threaded equipments 1 1/2 to 2 in (38 to 51 mm)
|
95.99 | |
|
Rock drilling -- Extension drill-steel equipment for percussive long-hole drilling -- Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm)
|
90.93 | |
|
Rock drilling -- Extension drill-steel equipment for percussive long-hole drilling -- Reverse-buttress-threaded equipments 1 1/2 to 2 1/2 in (38 to 64 mm)
|
90.93 | |
|
ISO 3154:1976 [Withdrawn]
Stranded wire ropes for mine hoisting -- Technical delivery requirements
|
95.99 | |
|
Stranded wire ropes for mine hoisting -- Technical delivery requirements
|
90.20 | |
|
Stranded wire ropes for mine hoisting -- Fibre components -- Characteristics and tests
|
90.20 | |
|
Stranded wire ropes for mine hoisting -- Impregnating compounds, lubricants and service dressings -- Characteristics and tests
|
90.20 | |
|
Rotary core diamond drilling equipment -- System A -- Part 1: Metric units
|
90.60 | |
|
Rotary core diamond drilling equipment -- System A -- Part 2: Inch units
|
90.60 | |
|
Rotary core diamond drilling equipment -- System B -- Part 1: Metric units
|
90.60 | |
|
Rotary core diamond drilling equipment -- System B -- Part 2: Inch units
|
90.60 | |
|
ISO 5612:1984 [Withdrawn]
Mining -- Scraper bars for chain conveyors
|
95.99 | |
|
Mining -- Scraper bars for chain conveyors
|
90.93 | |
|
Mining -- Drive sprocket assemblies for chain conveyors
|
90.93 | |
|
Locked coil wire ropes for mine hoisting -- Technical delivery requirements
|
90.20 | |
|
Mining -- Guidance on methods of verifying dimensions of sprocket assemblies for chain conveyors
|
60.60 | |
|
Rotary core diamond drilling equipment -- System C
|
90.60 | |
| 60.60 | ||
| 60.60 | ||
|
Wireline diamond core drilling equipment -- System A -- Part 1: Metric units
|
90.60 | |
|
Wireline diamond core drilling equipment -- System A -- Part 2: Inch units
|
90.60 | |
|
Wireline diamond core drilling equipment -- System CSSK
|
90.60 | |
|
Rock drilling equipment -- Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm
|
90.93 | |
| 60.60 | ||
|
Rock drilling equipment -- Left-hand rope threads
|
90.93 | |
|
Mining and earth-moving machinery -- Rock drill rigs and rock reinforcement rigs -- Part 1: Vocabulary
|
60.60 | |
|
Mining and earth-moving machinery -- Rock drill rigs and rock reinforcement rigs -- Part 2: Safety requirements
|
60.60 | |
|
Continuous surface miners (CSM) -- Safety requirements
|
60.60 | |
|
Underground mining machines -- Mobile extracting machines at the face -- Safety requirements for shearer loaders and plough systems
|
60.60 | |
|
ISO 19225:2017/FDAmd 1 [Under development]
|
50.00 | |
|
Mining -- Mobile machines working underground -- Machine safety
|
60.60 | |
|
Structures for mine shafts -- Part 1: Vocabulary
|
60.60 | |
|
Structures for mine shafts -- Part 2: Headframe structures
|
60.60 | |
|
Structures for mine shafts -- Part 3: Sinking stages
|
60.60 | |
|
Structures for mine shafts -- Part 4: Conveyances
|
60.60 | |
|
Structures for mine shafts -- Part 5: Shaft system structures
|
60.60 | |
|
ISO/NP 19426-6 [Under development]
Structures for mine shafts -- Part 6: Design of Shaft Lining
|
10.99 |
|
|
ISO/NP 19426-7 [Under development]
Structures for mine shafts -- Part 7: Design of Rope Guides
|
10.99 |
|
|
Mining -- Classification of mine accidents
|
60.60 | |
| 60.60 | ||
|
ISO/DIS 22932-1 [Under development]
Mining -- Terminology -- Part 1: Planning and surveying
|
40.20 | |
|
ISO/DIS 22932-2 [Under development]
Mining -- Terminology -- Part 2: Geology
|
40.20 | |
|
ISO/NP 23872 [Under development]
Mining structures -- Underground structures
|
10.99 |
|
No matching records found