Filter :
Standard and/or project under the direct responsibility of ISO/TC 76 Secretariat Stage ICS
Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification
95.99
Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification
95.99
Glass — Hydrolytic resistance of glass grains at 98 °C — Method of test and classification
60.60
Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification
95.99
Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification
95.99
Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification
60.60
Transfusion equipment for medical use — Part 1: Glass transfusion bottles, closures and bottle caps
95.99
Transfusion equipment for medical use — Part 1: Glass transfusion bottles, closures and caps
95.99
Transfusion equipment for medical use — Part 3: Blood-taking set
95.99
Transfusion equipment for medical use — Part 3: Blood-taking sets for single use
90.93
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
95.99
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
95.99
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
95.99
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
95.99
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
95.99
Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed
90.92
Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed
30.99
Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus
90.92
Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus
30.99
Transfusion equipment for medical use
95.99
Glass syringes — Determination of extractable tungsten
60.60
Glass transfusion bottles for medical use — Chemical resistance
95.99
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers
95.99
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers
95.99
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers
60.60
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers — Amendment 1
40.60
Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on labels and instruction leaflets
90.93
Plastics collapsible containers for human blood and blood components — Part 3: Blood bag systems with integrated features
90.93
Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features
90.93
Plastics collapsible containers for human blood and blood components
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
90.92
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
40.00
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
90.92
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
40.00
Single use blood specimen containers up to 25 ml capacity
95.99
Single-use containers for venous blood specimen collection
95.99
Single-use containers for human venous blood specimen collection
90.20
In vitro diagnostic medical devices — Single-use containers for the collection of specimens from humans other than blood
60.60
Injection containers for injectables and accessories — Part 1: Injection vials made of glass tubing
95.99
Injection containers and accessories — Part 1: Injection vials made of glass tubing
95.99
Injection containers and accessories — Part 1: Injection vials made of glass tubing
95.99
Injection containers and accessories — Part 1: Injection vials made of glass tubing — Amendment 1
95.99
Injection containers and accessories — Part 1: Injection vials made of glass tubing
60.60
Injection containers for injectables and accessories — Part 2: Closures for injection vials
95.99
Injection containers and accessories — Part 2: Closures for injection vials
95.99
Injection containers and accessories — Part 2: Closures for injection vials
90.93
Injection containers and accessories — Part 2: Closures for injection vials — Amendment 1
60.60
Injection containers for injectables and accessories — Part 3: Aluminium caps for injection vials
95.99
Injection containers and accessories — Part 3: Aluminium caps for injection vials
90.93
Injection containers for injectables and accessories — Part 4: Injection vials made of moulded glass
95.99
Injection containers and accessories — Part 4: Injection vials made of moulded glass
95.99
Injection containers and accessories — Part 4: Injection vials made of moulded glass
90.93
Injection containers for injectables and accessories — Part 5: Freeze drying closures for injection vials
95.99
Injection containers and accessories — Part 5: Freeze drying closures for injection vials
95.99
Injection containers and accessories — Part 5: Freeze drying closures for injection vials
90.93
Injection containers for injectables and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials
95.99
Injection containers and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials
90.93
Injection containers for injectables and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
95.99
Injection containers and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
90.93
Risk management of particulate contamination for devices with intravascular access
30.20
Infusion equipment for medical use — Part 1: Infusion glass bottles
95.99
Infusion equipment for medical use — Part 1: Infusion glass bottles
95.99
Infusion equipment for medical use — Part 1: Infusion glass bottles — Amendment 1
95.99
Infusion equipment for medical use — Part 1: Infusion glass bottles
95.99
Infusion equipment for medical use — Part 1: Infusion glass bottles
90.93
Infusion equipment for medical use — Part 2: Closures for infusion bottles
95.99
Infusion equipment for medical use — Part 2: Closures for infusion bottles
95.99
Infusion equipment for medical use — Part 2: Closures for infusion bottles — Technical Corrigendum 1
95.99
Infusion equipment for medical use — Part 2: Closures for infusion bottles
90.92
Infusion equipment for medical use — Part 2: Closures for infusion bottles
50.00
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles
95.99
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles
95.99
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles
90.93
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles — Amendment 1
60.60
Infusion equipment for medical use — Part 4: Infusion sets for single use
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed — Amendment 1
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
60.60
Infusion equipment for medical use — Part 5: Burette type infusion sets
95.99
Infusion equipment for medical use — Part 5: Burette infusion sets for single use, gravity feed
90.93
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
95.99
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
95.99
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
90.92
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles — Amendment 1
20.98
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
20.00
Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles
95.99
Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles
95.99
Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles
90.93
Infusion equipment for medical use — Part 8: Infusion equipment for use with pressure infusion apparatus
95.99
Infusion equipment for medical use — Part 8: Infusion sets for single use with pressure infusion apparatus
90.93
Infusion equipment for medical use — Part 9: Fluid lines for use with pressure infusion equipment
95.99
Infusion equipment for medical use — Part 9: Fluid lines for single use with pressure infusion equipment
90.93
Infusion equipment for medical use — Part 10: Accessories for fluid lines for use with pressure infusion equipment
95.99
Infusion equipment for medical use — Part 10: Accessories for fluid lines for single use with pressure infusion equipment
90.93
Infusion equipment for medical use — Part 11: Infusion filters for use with pressure infusion equipment
95.99
Infusion equipment for medical use — Part 11: Infusion filters for single use with pressure infusion equipment
90.93
Infusion equipment for medical use — Part 12: Check valves
95.99
Infusion equipment for medical use — Part 12: Check valves — Amendment 1
95.99
Infusion equipment for medical use — Part 12: Check valves for single use
60.60
Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact
90.92
Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact
20.00
Infusion equipment for medical use — Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
90.93
Infusion equipment for medical use — Part 15: Light-protective infusion sets for single use
60.60
Infusion equipment for medical use — Part 15: Light-protective infusion sets for single use — Amendment 1
40.60
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates
90.93
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization
95.99
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization — Amendment 1
95.99
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization
60.60
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count
90.93
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count — Amendment 1
60.60
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 4: Biological requirements and test methods
90.93
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
95.99
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
90.92
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
20.00
Elastomeric parts for aqueous parenteral preparations
95.99
Elastomeric parts for aqueous parenteral preparations
95.99
Elastomeric parts for aqueous parenteral preparations — Amendment 1
95.99
Aluminium caps for transfusion, infusion and injection bottles — General requirements and test methods
95.99
Aluminium caps for transfusion, infusion and injection bottles — General requirements and test methods
95.99
Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials — General requirements and test methods
60.60
Injection equipment for medical use — Part 1: Ampoules for injectables
95.99
Injection equipment for medical use — Part 1: Ampoules for injectables
95.99
Injection equipment for medical use — Part 1: Ampoules for injectables
95.99
Injection equipment for medical use — Part 1: Ampoules for injectables
90.93
Injection equipment for medical use — Part 2: One-point-cut (OPC) ampoules
95.99
Injection equipment for medical use — Part 2: One-point-cut (OPC) ampoules
90.93
Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
95.99
Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
95.99
Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
95.99
Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic cartridges
95.99
Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic cartridges
90.93
Prefilled syringes — Part 2: Plungers and discs for dental local anaesthetic cartridges
95.99
Prefilled syringes — Part 2: Plunger stoppers for dental local anaesthetic cartridges
90.93
Prefilled syringes — Part 3: Aluminium caps for dental local anaesthetic cartridges
95.99
Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges
90.20
Prefilled syringes — Part 4: Glass barrels for injectables
95.99
Prefilled syringes — Part 4: Glass barrels for injectables
95.99
Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
90.92
Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling — Amendment 1
60.60
Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
30.60
Prefilled syringes — Part 5: Plungers for injectables
95.99
Prefilled syringes — Part 5: Plungers for injectables
95.99
Prefilled syringes — Part 5: Plunger stoppers for injectables
90.20
Prefilled syringes — Part 6: Plastic barrels for injectables
95.99
Prefilled syringes — Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling
60.60
Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling
90.92
Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling
30.60
Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes
90.92
Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes
20.00
Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing bottles
95.99
Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles
95.99
Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles
90.93
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck bottles for syrups
95.99
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups
95.99
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups
90.93
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups — Amendment 1
60.60
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck bottles (veral) for solid and liquid dosage forms
95.99
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
95.99
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
90.93
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms — Amendment 1
60.60
Containers and accessories for pharmaceutical preparations — Part 4: Tablet bottles
95.99
Containers and accessories for pharmaceutical preparations — Part 4: Tablet glass bottles
90.93
Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies
95.99
Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies
90.93
Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
95.99
Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
90.93
Pen systems — Part 1: Glass cylinders for insulin pen-injectors
95.99
Pen systems — Part 1: Glass cylinders for pen-injectors for medical use
95.99
Pen systems — Part 1: Glass cylinders for pen-injectors for medical use
95.99
Pen systems — Part 1: Glass cylinders for pen-injectors for medical use
60.60
Pen systems — Part 2: Plungers and discs for pen-injectors for medical use
95.99
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
95.99
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use — Amendment 1
95.99
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
90.20
Pen systems — Part 3: Seals for pen-injectors for medical use
95.99
Pen systems — Part 3: Seals for pen-injectors for medical use
60.60
Disposable hanging devices for transfusion and infusion bottles — Requirements and test methods
90.93
Self-adhesive hanging devices for infusion bottles and injection vials — Requirements and test methods
90.93
Hanging devices for multiple use with infusion bottles — Requirements and test methods
95.99
Medical infusion bottles — Suspension devices for multiple use — Requirements and test methods
90.93
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP)
95.99
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
95.99
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
95.99
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
90.20
Plastics containers for intravenous injection
95.99
Plastic containers for intravenous injections
95.99
Plastic containers for intravenous injections
60.60
Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the Blow-Fill-Seal (BFS) process
95.99
Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
90.93
Medical devices — Pump tube spallation test — General procedure
60.60
Sterile packaged ready for filling glass cartridges
60.60
Sterile packaged ready for filling glass vials
60.60
Transfer sets for pharmaceutical preparations — Requirements and test methods
95.99
Transfer sets for pharmaceutical preparations — Requirements and test methods
95.99
Transfer sets for pharmaceutical preparations — Requirements and test methods
60.60
Medical devices — Transfusion set and blood bag compatibility test method
90.20
Aerosol bacterial retention test method for air-inlet on administration devices
40.60
Snap-on bottles for metering pumps — Part 1: Tubular glass
60.60
Snap-on bottles for metering pumps — Part 2: Moulded glass
60.60
Snap-on bottles for metering pumps — Part 3: Plastic
60.60
Medical devices — Non-electrically driven portable infusion devices
95.99
Medical devices — Non-electrically driven portable infusion devices
60.60

No matching records found. Please try changing the filter settings.