• Filter:

  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 61/SC 2 Secretariat Stage ICS
ISO 75-1:1993
Plastics — Determination of temperature of deflection under load — Part 1: General test method
95.99
ISO 75-1:2004
Plastics — Determination of temperature of deflection under load — Part 1: General test method
95.99
ISO 75-1:2013
Plastics — Determination of temperature of deflection under load — Part 1: General test method
90.92
ISO 75-2:1993
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
95.99
ISO 75-2:2004
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
95.99
ISO 75-2:2013
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
90.93
ISO 75-3:1993
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
95.99
ISO 75-3:2004
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
90.93
ISO 75:1987
Plastics and ebonite — Determination of temperature of deflection under load
95.99
ISO/FDIS 75-1
Plastics — Determination of temperature of deflection under load — Part 1: General test method
50.00
ISO 178:1993
Plastics — Determination of flexural properties
95.99
ISO 178:2001
Plastics — Determination of flexural properties
95.99
ISO 178:2001/Amd 1:2004
Plastics — Determination of flexural properties — Amendment 1: Precision statement
95.99
ISO 178:2010
Plastics — Determination of flexural properties
95.99
ISO 178:2010/Amd 1:2013
Plastics — Determination of flexural properties — Amendment 1
95.99
ISO 178:2019
Plastics — Determination of flexural properties
60.60
ISO 179-1:2000
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
95.99
ISO 179-1:2000/Amd 1:2005
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test — Amendment 1
95.99
ISO 179-1:2010
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
90.93
ISO 179-2:1997
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
90.92
ISO 179-2:1997/Amd 1:2011
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Amendment 1: Precision data
60.60
ISO 179-2:1997/Cor 1:1998
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Technical Corrigendum 1
60.60
ISO 179:1982
Plastics — Determination of Charpy impact strength of rigid materials
95.99
ISO 179:1993
Plastics — Determination of Charpy impact strength
95.99
ISO 179:1993/Cor 1:1994
Plastics — Determination of Charpy impact strength — Technical Corrigendum 1
95.99
ISO/DIS 179-2
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
40.60
ISO 180
Plastics — Determination of Izod impact strength
60.00
ISO 180:1982
Plastics — Determination of Izod impact strength of rigid materials
95.99
ISO 180:1993
Plastics — Determination of Izod impact strength
95.99
ISO 180:1993/Cor 1:1995
Plastics — Determination of Izod impact strength — Technical Corrigendum 1
95.99
ISO 180:2000
Plastics — Determination of Izod impact strength
90.92
ISO 180:2000/Amd 1:2006
Plastics — Determination of Izod impact strength — Amendment 1
60.60
ISO 180:2000/Amd 2:2013
Plastics — Determination of Izod impact strength — Amendment 2: Precision data
60.60
ISO 306:1987
Plastics — Thermoplastic materials — Determination of Vicat softening temperature
95.99
ISO 306:1994
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
95.99
ISO 306:2004
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
95.99
ISO 306:2013
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
90.93
ISO 458-1:1985
Plastics — Determination of stiffness in torsion of flexible materials — Part 1: General method
90.93
ISO 458-2:1985
Plastics — Determination of stiffness in torsion of flexible materials — Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
90.93
ISO/R 458:1965
Plastics — Determination of stiffness in torsion as a function of temperature
95.99
ISO 527-1:1993
Plastics — Determination of tensile properties — Part 1: General principles
95.99
ISO 527-1:1993/Amd 1:2005
Plastics — Determination of tensile properties — Part 1: General principles — Amendment 1: Details of extensometer
95.99
ISO 527-1:1993/Cor 1:1994
Plastics — Determination of tensile properties — Part 1: General principles — Technical Corrigendum 1
95.99
ISO 527-1:2012
Plastics — Determination of tensile properties — Part 1: General principles
95.99
ISO 527-1:2019
Plastics — Determination of tensile properties — Part 1: General principles
60.60
ISO 527-2:1993
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
95.99
ISO 527-2:1993/Cor 1:1994
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics — Technical Corrigendum 1
95.99
ISO 527-2:2012
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
90.93
ISO 527-3:1995/Cor 1:1998
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets — Technical Corrigendum 1
95.99
ISO/R 527:1966
Plastics — Determination of tensile properties
95.99
ISO 537:1989
Plastics — Testing with the torsion pendulum
95.99
ISO 604:1993
Plastics — Determination of compressive properties
95.99
ISO 604:2002
Plastics — Determination of compressive properties
90.93
ISO 868:1985
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
95.99
ISO 868:2003
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
90.93
ISO 899-1:1993
Plastics — Determination of creep behaviour — Part 1: Tensile creep
95.99
ISO 899-1:2003
Plastics — Determination of creep behaviour — Part 1: Tensile creep
95.99
ISO 899-1:2003/Amd 1:2015
Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1
95.99
ISO 899-1:2017
Plastics — Determination of creep behaviour — Part 1: Tensile creep
60.60
ISO 899-2:1993
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
95.99
ISO 899-2:2003
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
90.93
ISO 899-2:2003/Amd 1:2015
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1
60.60
ISO 899:1981
Plastics — Determination of tensile creep
95.99
ISO 974:1980
Plastics — Determination of the brittleness temperature by impact
95.99
ISO 974:2000
Plastics — Determination of the brittleness temperature by impact
90.93
ISO 2039-1:1987
Plastics — Determination of hardness — Part 1: Ball indentation method
95.99
ISO 2039-1:1993
Plastics — Determination of hardness — Part 1: Ball indentation method
95.99
ISO 2039-1:2001
Plastics — Determination of hardness — Part 1: Ball indentation method
90.93
ISO 2039-2:1981
Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
95.99
ISO 2039-2:1987
Plastics — Determination of hardness — Part 2: Rockwell hardness
90.93
ISO 2039:1973
Plastics and ebonite — Determination of hardness by the ball indentation method
95.99
ISO 3167:1993
Plastics — Multipurpose test specimens
95.99
ISO 3167:2002
Plastics — Multipurpose test specimens
95.99
ISO 3167:2014
Plastics — Multipurpose test specimens
90.20
ISO/TR 4137:1978
Plastics — Determination of modulus of elasticity by alternating flexure
95.99
ISO 6239:1986
Plastics — Determination of tensile properties by use of small specimens
95.99
ISO 6601:1987
Plastics — Friction and wear by sliding — Identification of test parameters
95.99
ISO 6601:2002
Plastics — Friction and wear by sliding — Identification of test parameters
90.93
ISO 6602:1985
Plastics — Determination of flexural creep by three-point loading
95.99
ISO 6603-1:1985
Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 1: Falling dart method
95.99
ISO 6603-1:2000
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing
90.93
ISO 6603-2:1989
Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 2: Instrumented puncture test
95.99
ISO 6603-2:2000
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
90.93
ISO 6721-10:1997
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
95.99
ISO 6721-10:1999
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
95.99
ISO 6721-12:2009
Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method
90.20
ISO 6721-1:1994
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
95.99
ISO 6721-1:1994/Cor 1:1995
Plastics — Determination of dynamic mechanical properties — Part 1: General principles — Technical Corrigendum 1
95.99
ISO 6721-1:2001
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
95.99
ISO 6721-2:1994
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
95.99
ISO 6721-2:1994/Cor 1:1995
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method — Technical Corrigendum 1
95.99
ISO 6721-3:1994/Cor 1:1995
Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method — Technical Corrigendum 1
60.60
ISO 6721-4:1994
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
95.99
ISO 6721-5:1996/Amd 1:2007
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method — Amendment 1
95.99
ISO 6721-6:1996/Amd 1:2007
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method — Amendment 1
95.99
ISO 6721-7:1996/Amd 1:2007
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method — Amendment 1
95.99
ISO 6721-9:1997/Amd 1:2007
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method — Amendment 1: Precision
95.99
ISO 6721:1983
Plastics — Determination of damping properties and complex modulus by bending vibration
95.99
ISO 8256:1990
Plastics — Determination of tensile-impact strength
95.99
ISO 8256:1990/Cor 1:1991
Plastics — Determination of tensile-impact strength — Technical Corrigendum 1
95.99
ISO 8256:2004
Plastics — Determination of tensile-impact strength
90.93
ISO 9352:1989
Plastics — Determination of resistance to wear by abrasive wheels
95.99
ISO 9352:1995
Plastics — Determination of resistance to wear by abrasive wheels
95.99
ISO 9352:2012
Plastics — Determination of resistance to wear by abrasive wheels
90.93
ISO 10350-1:1998
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
95.99
ISO 10350-1:2007
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
95.99
ISO 10350-1:2007/Amd 1:2014
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials — Amendment 1
95.99
ISO 10350-1:2017
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
60.60
ISO 10350-2:2001
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
95.99
ISO 10350-2:2011
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
90.92
ISO 10350:1993
Plastics — Acquisition and presentation of comparable single-point data
95.99
ISO/DIS 10350-2
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
40.60
ISO 11403-1:1994
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
95.99
ISO 11403-1:2001
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
95.99
ISO 11403-1:2014
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
90.60
ISO 11403-2:1995
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
95.99
ISO 11403-2:2004
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
95.99
ISO 11403-2:2012
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
90.92
ISO 11403-3:1999
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
95.99
ISO 11403-3:2014
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
90.60
ISO/CD 11403-2
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
30.99
ISO 13586:2000
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach
95.99
ISO 13586:2000/Amd 1:2003
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach — Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres
95.99
ISO 13586:2018
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach
60.60
ISO 13802:1999
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
95.99
ISO 13802:1999/Cor 1:2000
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing — Technical Corrigendum 1
95.99
ISO 13802:2015
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
60.60
ISO 15850:2002
Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach
95.99
ISO 15850:2014
Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach
90.93
ISO 16012:2004
Plastics — Determination of linear dimensions of test specimens
95.99
ISO 16012:2004/Cor 1:2005
Plastics — Determination of linear dimensions of test specimens — Technical Corrigendum 1
95.99
ISO 16012:2015
Plastics — Determination of linear dimensions of test specimens
60.60
ISO 17281:2002
Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
95.99
ISO 17281:2018
Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
60.60
ISO 17282:2004
Plastics — Guide to the acquisition and presentation of design data
90.93
ISO 17541:2014
Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility
90.20
ISO/DIS 18485
Peel test for the determination of interlaminar fracture toughness of flexible packaging laminates
40.98
ISO 18872:2007
Plastics — Determination of tensile properties at high strain rates
90.93
ISO 19252:2008
Plastics — Determination of scratch properties
90.93
ISO/TS 19278:2019
Plastics — Instrumented micro-indentation test for hardness measurement
60.60
ISO/DIS 20329
Plastics - Determination of abrasive wear resistance by sliding friction
40.60
ISO 20753:2008
Plastics — Test specimens
95.99
ISO 20753:2018
Plastics — Test specimens
60.60
ISO/WD TS 20979
Plastics — Determination of fracture toughness of polyethylene (PE) under plane stress impact conditions
20.20
ISO 21509:2006
Plastics and ebonite — Verification of Shore durometers
90.20
ISO/WD 23524
Plastics — Determination of fracture toughness of films and thin sheets: the essential work of fracture
20.99
ISO 25217:2009
Adhesives — Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens
90.20
ISO/CD TS 28660
Plastics — Determination of J-R curves
30.60
ISO 29221:2014
Plastics — Determination of mode I plane-strain crack-arrest toughness
90.93

No matching records found. Please try changing the filter settings.