Subcommittee | Subcommittee Title | Published standards | Standards under development |
---|---|---|---|
ISO/TC 59/SC 2 | Terminology and harmonization of languages | 6 | 2 |
ISO/TC 59/SC 8 | Sealants | 29 | 7 |
ISO/TC 59/SC 13 | Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) | 12 | 8 |
ISO/TC 59/SC 14 | Design life | 10 | 0 |
ISO/TC 59/SC 15 | Framework for the description of housing performance | 8 | 0 |
ISO/TC 59/SC 16 | Accessibility and usability of the built environment | 1 | 1 |
ISO/TC 59/SC 17 | Sustainability in buildings and civil engineering works | 9 | 7 |
ISO/TC 59/SC 18 | Construction procurement | 8 | 4 |
Standard and/or project under the direct responsibility of ISO/TC 59 Secretariat | Stage | ICS |
---|---|---|
Building construction -- Modular coordination -- Basic module
|
90.92 | |
Building construction -- Modular coordination -- Multimodules for horizontal coordinating dimensions
|
90.92 | |
ISO 1789:1973 [Withdrawn]
Withdrawal of ISO 1789-1973
|
95.99 | |
ISO/R 1790:1970 [Withdrawn]
Modular co-ordination -- Reference lines of horizontal controlling co-ordinating dimensions
|
95.99 | |
ISO 1803:1973 [Withdrawn]
Tolerances for building -- Vocabulary
|
95.99 | |
ISO 1803-1:1985 [Withdrawn]
Building construction -- Tolerances -- Vocabulary -- Part 1: General terms
|
95.99 | |
ISO 1803-2:1986 [Withdrawn]
Building construction -- Tolerances -- Vocabulary -- Part 2: Derived terms
|
95.99 | |
ISO 2444:1974 [Withdrawn]
Joints in building -- Vocabulary
|
95.99 | |
Joints in building -- Fundamental principles for design
|
90.20 | |
ISO 2776:1974 [Withdrawn]
Modular co-ordination -- Co-ordinating sizes for doorsets -- External and internal
|
95.99 | |
ISO 2777:1974 [Withdrawn]
Modular co-ordination -- Co-ordinating sizes for rigid flat sheet boards used in building
|
95.99 | |
ISO 2848:1974 [Withdrawn]
Modular co-ordination -- Principles and rules
|
95.99 | |
Building construction -- Modular coordination -- Principles and rules
|
90.93 | |
ISO 3055:1974 [Withdrawn]
Kitchen equipment -- Co-ordinating sizes
|
95.99 | |
Tolerances for building -- Part 1: Basic principles for evaluation and specification
|
90.93 | |
Tolerances for building -- Part 2: Statistical basis for predicting fit between components having a normal distribution of sizes
|
90.93 | |
Tolerances for building -- Part 3: Procedures for selecting target size and predicting fit
|
90.93 | |
Tolerances for building -- Part 4: Method for predicting deviations of assemblies and for allocation of tolerances
|
90.93 | |
Building construction -- Tolerances for building -- Part 5: Series of values to be used for specification of tolerances
|
90.93 | |
Tolerances for building -- Part 6: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control -- Method 1
|
90.93 | |
Tolerances for building -- Part 7: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control -- Method 2 (Statistical control method)
|
90.93 | |
Tolerances for building -- Part 8: Dimensional inspection and control of construction work
|
90.93 | |
Joints in building -- General check-list of joint functions
|
90.93 | |
Building construction -- Modular co-ordination -- Stairs and stair openings -- Co-ordinating dimensions
|
90.20 | |
ISO 4463:1979 [Withdrawn]
Measurement methods for building -- Setting out and measurement -- Permissible measuring deviations
|
95.99 | |
Measurement methods for building -- Setting-out and measurement -- Part 1: Planning and organization, measuring procedures, acceptance criteria
|
90.93 | |
Measurement methods for building -- Setting-out and measurement -- Part 2: Measuring stations and targets
|
90.93 | |
Measurement methods for building -- Setting-out and measurement -- Part 3: Check-lists for the procurement of surveys and measurement services
|
90.93 | |
ISO 4464:1980 [Withdrawn]
Tolerances for building -- Relationship between the different types of deviations and tolerances used for specification
|
95.99 | |
ISO 6240:1980 [Withdrawn]
Performance standards in building -- Contents and presentation
|
95.99 | |
ISO 6241:1984 [Withdrawn]
Performance standards in building -- Principles for their preparation and factors to be considered
|
95.99 | |
Building construction -- Modular coordination -- Modular floor plane for vertical dimensions
|
90.20 | |
Building construction -- Modular coordination -- Storey heights and room heights
|
90.92 | |
Building construction -- Modular coordination -- Series of preferred multimodular sizes for horizontal dimensions
|
90.92 | |
Building construction -- Modular coordination -- Sub-modular increments
|
90.92 | |
Joints in building -- Laboratory method of test for air permeability of joints
|
90.93 | |
Measuring methods for building -- General principles and procedures for the verification of dimensional compliance
|
90.93 | |
ISO 7162:1992 [Withdrawn]
Performance standards in building -- Contents and format of standards for evaluation of performance
|
95.99 | |
Performance standards in building -- Presentation of performance levels of facades made of same-source components
|
90.93 | |
ISO 7390:1982 [Withdrawn]
Building construction -- Jointing products -- Determination of resistance to flow
|
95.99 | |
Joints in building -- Principles for jointing of building components -- Accommodation of dimensional deviations during construction
|
90.93 | |
Typical horizontal joints between an external wall of prefabricated ordinary concrete components and a concrete floor -- Properties. characteristics and classification criteria
|
90.93 | |
Typical vertical joints between two prefabricated ordinary concrete external wall components -- Properties, characteristics and classification criteria
|
90.93 | |
Tolerances for building -- Presentation of dimensional accuracy data
|
90.93 | |
Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels -- Laboratory mechanical tests -- Effect of tangential loading
|
90.93 | |
Horizontal joints between load-bearing walls and concrete floors -- Laboratory mechanical tests -- Effect of vertical loading and of moments transmitted by the floors
|
90.93 | |
Vertical building elements -- Impact resistance tests -- Impact bodies and general test procedures
|
90.93 | |
ISO 7894:1987 [Withdrawn]
Partitions made of components -- Test for resistance to wind (static pressure and slamming doors)
|
95.99 | |
ISO 7895:1987 [Withdrawn]
Facades made of components -- Tests for resistance to positive and negative static pressure generated by wind
|
95.99 | |
Tolerances for building -- Methods of measurement of buildings and building products -- Part 1: Methods and instruments
|
90.93 | |
Tolerances for building -- Methods of measurement of buildings and building products -- Part 2: Position of measuring points
|
90.93 | |
ISO/TR 8389:1984 [Withdrawn]
Building construction -- Modular coordination -- System of preferred numbers defining multimodular sizes
|
95.99 | |
ISO/TR 8390:1984 [Withdrawn]
Building construction -- Modular coordination -- Application of horizontal multimodules
|
95.99 | |
ISO/TR 9527:1994 [Withdrawn]
Building construction -- Needs of disabled people in buildings -- Design guidelines
|
95.99 | |
ISO 9699:1994 [Withdrawn]
Performance standards in building -- Checklist for briefing -- Contents of brief for building design
|
95.99 | |
ISO 9836:1992 [Withdrawn]
Performance standards in building -- Definition and calculation of area and space indicators
|
95.99 | |
Performance standards in building -- Performance test for precast concrete floors -- Behaviour under non-concentrated load
|
90.93 | |
Performance standards in building -- Performance test for precast concrete floors -- Behaviour under concentrated load
|
90.93 | |
ISO/DIS 21723 [Under development]
Buildings and civil engineering works -- Modular coordination -- Module
|
40.20 | |
ISO/WD TR 22845 [Under development]
Resilience of buildings and civil engineering works
|
20.20 |
|
ISO/WD 23234 [Under development]
Buildings and civil engineering works -- Security -- Planning of security measures in the built environment
|
20.20 |
|
No matching records found