• Filter:

  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 45/SC 2 Secretariat Stage ICS
ISO 34-1:1994
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
95.99
ISO 34-1:1994/Cor 1:1999
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces — Technical Corrigendum 1
95.99
ISO 34-1:2004
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
95.99
ISO 34-1:2010
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
95.99
ISO 34-1:2015
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
60.60
ISO 34-2:1996
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces
95.99
ISO 34-2:2007
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces
95.99
ISO 34-2:2011
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces
95.99
ISO 34-2:2015
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces
60.60
ISO 34:1979
Rubber, vulcanized — Determination of tear strength (trouser, angle and crescent test pieces)
95.99
ISO 36:1985
Rubber, vulcanized — Determination of adhesion to textile fabric
95.99
ISO 36:1993
Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabric
95.99
ISO 36:1999
Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabric
95.99
ISO 36:2005
Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics
95.99
ISO 36:2011
Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics
95.99
ISO 36:2017
Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics
90.92
ISO/DIS 36
Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics
40.20
ISO 37:1977
Rubber, vulcanized — Determination of tensile stress-strain properties
95.99
ISO 37:1994
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
95.99
ISO 37:2005
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
95.99
ISO 37:2005/Cor 1:2008
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties — Technical Corrigendum 1
95.99
ISO 37:2011
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
95.99
ISO 37:2017
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
60.60
ISO 48-1:2018
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 1: Introduction and guidance
60.60
ISO 48-2:2018
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 2: Hardness between 10 IRHD and 100 IRHD
60.60
ISO 48-3:2018
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
60.60
ISO 48-4:2018
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)
60.60
ISO 48-5:2018
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 5: Indentation hardness by IRHD pocket meter method
60.60
ISO 48-6:2018
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 6: Apparent hardness of rubber-covered rollers by IRHD method
60.60
ISO 48-7:2018
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
60.60
ISO 48-8:2018
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
60.60
ISO 48-9:2018
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers
60.60
ISO 48:1979
Vulcanized rubbers — Determination of hardness (Hardness between 30 and 85 IRHD)
95.99
ISO 48:1994
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
95.99
ISO 48:1994/Amd 1:1999
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD) — Amendment 1
95.99
ISO 48:2007
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
95.99
ISO 48:2007/Cor 1:2009
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD) — Technical Corrigendum 1
95.99
ISO 48:2010
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
95.99
ISO 132:1983
Rubber, vulcanized — Determination of flex cracking (De Mattia)
95.99
ISO 132:1999
Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)
95.99
ISO 132:2005
Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)
95.99
ISO 132:2011
Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)
95.99
ISO 132:2017
Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)
60.60
ISO 133:1983
Rubber, vulcanized — Determination of crack growth (De Mattia)
95.99
ISO 188:1982
Rubber, vulcanized — Accelerated ageing or heat-resistance tests
95.99
ISO 188:1998
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
95.99
ISO 188:1998/Cor 1:2003
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests — Technical Corrigendum 1
95.99
ISO 188:2007
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
95.99
ISO 188:2011
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
90.93
ISO 247-1:2018
Rubber — Determination of ash — Part 1: Combustion method
60.60
ISO 247-2:2018
Rubber — Determination of ash — Part 2: Thermogravimetric analysis (TGA)
60.60
ISO 247:1990
Rubber — Determination of ash
95.99
ISO 247:2006
Rubber — Determination of ash
95.99
ISO 248:1991
Rubbers, raw — Determination of volatile-matter content
95.99
ISO 248:2005
Rubber, raw — Determination of volatile-matter content
95.99
ISO 289-1:1994
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity
95.99
ISO 289-1:2005
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity
95.99
ISO 289-1:2005/Cor 1:2009
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity — Technical Corrigendum 1
95.99
ISO 289-1:2014
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity
95.99
ISO 289-1:2015
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity
60.60
ISO 289-2:1994
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics
95.99
ISO 289-2:2016
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics
90.92
ISO 289-3:1999
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
95.99
ISO 289-3:2015
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
60.60
ISO 289-4:2003
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate
95.99
ISO 289:1985
Rubber, unvulcanized — Determination of Mooney viscosity
95.99
ISO/DIS 289-2
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics
40.20
ISO/TS 289-4:2017
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate
60.60
ISO 471:1983
Rubber — Standard temperatures, humidities and times for the conditioning and testing of test pieces
95.99
ISO 471:1995
Rubber — Temperatures, humidities and times for conditioning and testing
95.99
ISO 667:1981
Rubber, compounded — Determination of cure rate — Shearing disk method
95.99
ISO 812:1991
Rubber, vulcanized — Determination of low-temperature brittleness
95.99
ISO 812:2006
Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
95.99
ISO 812:2011
Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
95.99
ISO 812:2017
Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
60.60
ISO 813:1986
Rubber, vulcanized — Determination of adhesion to metal — One-plate method
95.99
ISO 813:1997
Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method
95.99
ISO 813:2010
Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method
95.99
ISO 813:2016
Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method
95.99
ISO 813:2019
Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method
60.60
ISO 814:1986
Rubber, vulcanized — Determination of adhesion to metal — Two-plate method
95.99
ISO 814:1996
Rubber, vulcanized — Determination of adhesion to metal — Two-plate method
95.99
ISO 814:2007
Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method
95.99
ISO 814:2011
Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method
95.99
ISO 814:2017
Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method
60.60
ISO 815-1:2008
Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
95.99
ISO 815-1:2014
Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
90.92
ISO 815-2:2008
Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures
95.99
ISO 815-2:2014
Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures
90.92
ISO 815:1991
Rubber, vulcanized or thermoplastic — Determination of compression set at ambient, elevated or low temperatures
95.99
ISO 815:1991/Cor 1:1993
Rubber, vulcanized or thermoplastic — Determination of compression set at ambient, elevated or low temperatures — Technical Corrigendum 1
95.99
ISO/FDIS 815-1
Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
50.20
ISO/FDIS 815-2
Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures
50.20
ISO 816:1983
Rubber, vulcanized — Determination of tear strength of small test pieces (Delft test pieces)
95.99
ISO 1399:1982
Rubber, vulcanized — Determination of permeability to gases — Constant volume method
95.99
ISO 1400:1975
Vulcanized rubbers of high hardness (85 to 100 IRHD) — Determination of hardness
95.99
ISO 1407:1992
Rubber — Determination of solvent extract
95.99
ISO 1407:1992/Cor 1:2007
Rubber — Determination of solvent extract — Technical Corrigendum 1
95.99
ISO 1407:2009
Rubber — Determination of solvent extract
95.99
ISO 1407:2011
Rubber — Determination of solvent extract
90.93
ISO 1408:1995
Rubber — Determination of carbon black content — Pyrolytic and chemical degradation methods
90.93
ISO 1409:1995
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method
95.99
ISO 1431-1:1980/Amd 1:1982
Rubber vulcanized — Resistance to ozone cracking — Part 1: Static strain test — Amendment 1
95.99
ISO 1431-1:1989
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static strain test
95.99
ISO 1431-1:2004
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
95.99
ISO 1431-1:2004/Amd 1:2009
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing — Amendment 1
95.99
ISO 1431-1:2012
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
90.93
ISO 1431-2:1982
Rubber, vulcanized — Resistance to ozone cracking — Part 2: Dynamic strain test
95.99
ISO 1431-2:1994
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 2: Dynamic strain test
95.99
ISO 1431-3:2000
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
95.99
ISO 1431-3:2017
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
60.60
ISO 1431:1972
Withdrawal of ISO 1431-1972
95.99
ISO/WD 1431-4
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 4: Under high humidity condition
20.20
ISO 1432:1982
Rubber, vulcanized — Low temperature stiffening (Gehman test) — Determination
95.99
ISO 1432:1988
Rubber, vulcanized or thermoplastic — Determination of low temperature stiffening (Gehman test)
95.99
ISO 1432:1988/Cor 1:2003
Rubber, vulcanized or thermoplastic — Determination of low temperature stiffening (Gehman test) — Technical Corrigendum 1
95.99
ISO 1432:2013
Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test)
90.92
ISO/DIS 1432
Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test)
40.20
ISO 1653:1975
Vulcanized rubbers — Determination of compression set under constant deflection at low temperatures
95.99
ISO 1747:1976
Rubber, vulcanized — Determination of adhesion to rigid plates in shear — Quadruple shear method
95.99
ISO/R 1767:1971
Withdrawal of ISO/R 1767-1971
95.99
ISO 1817:1985
Rubber, vulcanized — Determination of the effect of liquids
95.99
ISO 1817:1999
Rubber, vulcanized — Determination of the effect of liquids
95.99
ISO 1817:2005
Rubber, vulcanized — Determination of the effect of liquids
95.99
ISO 1817:2011
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
95.99
ISO 1817:2015
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
60.60
ISO 1818:1975
Vulcanized rubbers of low hardness (10 to 35 IRHD) — Determination of hardness
95.99
ISO 1826:1981
Rubber, vulcanized — Time-interval between vulcanization and testing — Specification
95.99
ISO 1827:1991
Rubber, vulcanized or thermoplastic — Determination of modulus in shear or adhesion to rigid plates — Quadruple shear method
95.99
ISO 1827:2007
Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
95.99
ISO 1827:2011
Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
95.99
ISO 1827:2016
Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
60.60
ISO 1853:1975
Conducting and antistatic rubbers — Measurement of resistivity
95.99
ISO 1853:1998
Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
95.99
ISO 1853:2011
Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
95.99
ISO 1853:2018
Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
60.60
ISO 2007:1991
Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method
95.99
ISO 2007:2007
Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method
95.99
ISO 2007:2018
Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method
60.60
ISO 2285:1988
Rubber, vulcanized or thermoplastic — Determination of tension set at normal and high temperatures
95.99
ISO 2285:1997
Rubber, vulcanized or thermoplastic — Determination of tension set at normal and high temperatures
95.99
ISO 2285:2001
Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
95.99
ISO 2285:2007
Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
95.99
ISO 2285:2013
Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
95.99
ISO 2285:2019
Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
60.60
ISO 2454:1995
Rubber products — Determination of zinc content — EDTA titrimetric method
90.93
ISO 2472:1975
Ebonite — Determination of tensile strength and elongation at break
95.99
ISO 2473:1972
Ebonite — Determination of cross-breaking strength
95.99
ISO 2474:1972
Ebonite — Determination of crushing strength
95.99
ISO 2781:1988
Rubber, vulcanized — Determination of density
95.99
ISO 2781:1988/Cor 1:1996
Rubber, vulcanized — Determination of density — Technical Corrigendum 1
95.99
ISO 2781:2008
Rubber, vulcanized or thermoplastic — Determination of density
95.99
ISO 2781:2008/Amd 1:2010
Rubber, vulcanized or thermoplastic — Determination of density — Amendment 1: Precision data
95.99
ISO 2781:2018
Rubber, vulcanized or thermoplastic — Determination of density
60.60
ISO 2782-1:2012
Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods
95.99
ISO 2782-1:2016
Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods
60.60
ISO 2782-2:2012
Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 2: Equal-pressure method
95.99
ISO 2782-2:2018
Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 2: Equal-pressure method
60.60
ISO 2782:1977
Rubber, vulcanized — Determination of permeability to gases — Constant pressure method
95.99
ISO 2782:1995
Rubber, vulcanized or thermoplastic — Determination of permeability to gases
95.99
ISO 2782:2006
Rubber, vulcanized or thermoplastic — Determination of permeability to gases
95.99
ISO 2783:1975
Ebonite — Determination of hardness by means of a durometer
95.99
ISO 2856:1981
Elastomers — General requirements for dynamic testing
95.99
ISO 2878:1987
Rubber, vulcanized — Antistatic and conductive products — Determination of electrical resistance
95.99
ISO 2878:2005
Rubber — Antistatic and conductive products — Determination of electrical resistance
95.99
ISO 2878:2011
Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance
95.99
ISO 2878:2017
Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance
60.60
ISO 2882:1979
Rubber, vulcanized — Antistatic and conductive products for hospital use — Electrical resistance limits
95.99
ISO 2883:1980
Rubber, vulcanized — Antistatic and conductive products for industrial use — Electrical resistance limits
95.99
ISO 2921
Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)
60.00
ISO 2921:1982
Rubber, vulcanized — Determination of low temperature characteristics — Temperature-retraction procedure (TR test)
95.99
ISO 2921:1997
Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)
95.99
ISO 2921:2005
Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)
95.99
ISO 2921:2011
Rubber, vulcanized — Determination of low-temperature retraction (TR test)
90.92
ISO 2951:1974
Vulcanized rubber — Determination of insulation resistance
95.99
ISO 2951:2012
Rubber, vulcanized or thermoplastic — Determination of insulation resistance
95.99
ISO 2951:2019
Rubber, vulcanized rubber — Determination of insulation resistance
60.60
ISO 3383:1985
Rubber — General directions for achieving elevated or subnormal temperatures for test purposes
95.99
ISO 3384-1:2011
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature
95.99
ISO 3384-1:2011/Amd 1:2013
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature — Amendment 1: Revised calibration schedule
95.99
ISO 3384-1:2019
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature
60.60
ISO 3384-2:2012
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2: Testing with temperature cycling
95.99
ISO 3384-2:2019
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2: Testing with temperature cycling
60.60
ISO 3384:1986
Rubber, vulcanized — Determination of stress relaxation in compression at ambient and at elevated temperatures
95.99
ISO 3384:1991
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression at ambient and at elevated temperatures
95.99
ISO 3384:1991/Cor 1:1992
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression at ambient and at elevated temperatures — Technical Corrigendum 1
95.99
ISO 3384:1999
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression at ambient and at elevated temperatures
95.99
ISO 3384:1999/Amd 1:2001
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression at ambient and at elevated temperatures — Amendment 1: Precision data
95.99
ISO 3384:2005
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression at ambient and at elevated temperatures
95.99
ISO 3387:1978
Rubbers — Determination of crystallization effects by hardness measurements
95.99
ISO 3387:1994
Rubber — Determination of crystallization effects by hardness measurements
95.99
ISO 3387:1994/Cor 1:2000
Rubber — Determination of crystallization effects by hardness measurements — Technical Corrigendum 1
95.99
ISO 3387:2012
Rubber — Determination of crystallization effects by hardness measurements
90.92
ISO/DIS 3387
Rubber — Determination of crystallization effects by hardness measurements
40.99
ISO 3417:1991
Rubber — Measurement of vulcanization characteristics with the oscillating disc curemeter
95.99
ISO 3417:2008
Rubber — Measurement of vulcanization characteristics with the oscillating disc curemeter
95.99
ISO 3865:1983
Rubber, vulcanized - Methods of test for staining in contact with organic material
95.99
ISO 3865:1997
Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material
95.99
ISO 3865:2005
Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material
90.92
ISO/DIS 3865
Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material
40.99
ISO 3899:1988
Rubber — Nitrile latex — Determination of residual acrylonitrile content
95.99
ISO 4645:1984
Rubber and rubber products — Guide to the identification of antidegradants — Thin layer chromatographic methods
90.93
ISO 4645:1984/Cor 1:1991
Rubber and rubber products — Guide to the identification of antidegradants — Thin layer chromatographic methods — Technical Corrigendum 1
60.60
ISO 4647:1982
Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test
95.99
ISO 4647:2010
Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test
90.93
ISO 4648:1991
Rubber, vulcanized or thermoplastic — Determination of dimensions of test pieces and products for test purposes
95.99
ISO 4649:1985
Rubber — Determination of abrasion resistance using a rotating cylindrical drum device
95.99
ISO 4649:2002
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
95.99
ISO 4649:2010
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
95.99
ISO 4649:2017
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
60.60
ISO 4650:1984
Rubber — Identification — Infra-red spectrometric method
95.99
ISO 4650:2005
Rubber — Identification — Infrared spectrometric method
95.99
ISO 4650:2012
Rubber — Identification — Infrared spectrometric methods
90.93
ISO 4661-1:1986
Rubber, vulcanized — Preparation of samples and test pieces — Part 1: Physical tests
95.99
ISO 4661-1:1993
Rubber, vulcanized or thermoplastic — Preparation of samples and test pieces — Part 1: Physical tests
95.99
ISO 4661-2:1987
Rubber, vulcanized — Preparation of samples and test pieces — Part 2: Chemical tests
95.99
ISO 4661-2:2018
Rubber, vulcanized — Preparation of samples and test pieces — Part 2: Chemical tests
60.60
ISO 4661:1977
Rubber — Preparation of test pieces
95.99
ISO 4662:1986
Rubber — Determination of rebound resilience of vulcanizates
95.99
ISO 4662:2009
Rubber, vulcanized or thermoplastic — Determination of rebound resilience
95.99
ISO 4662:2009/Cor 1:2010
Rubber, vulcanized or thermoplastic — Determination of rebound resilience — Technical Corrigendum 1
95.99
ISO 4662:2017
Rubber, vulcanized or thermoplastic — Determination of rebound resilience
60.60
ISO 4663:1986
Rubber — Determination of dynamic behaviour of vulcanizates at low frequencies — Torsion pendulum method
95.99
ISO 4664-1:2005
Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance
95.99
ISO 4664-1:2011
Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance
90.93
ISO 4664-2:2006
Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 2: Torsion pendulum methods at low frequencies
90.93
ISO 4664:1987
Rubber — Determination of dynamic properties of vulcanizates for classification purposes (by forced sinusoidal shear strain)
95.99
ISO 4664:1998
Rubber — Guide to the determination of dynamic properties
95.99
ISO/DIS 4664-3
Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 3: Glass transition temperature (Tg)
40.20
ISO 4665-1:1985
Rubber, vulcanized — Resistance to weathering — Part 1: Assessment of changes in properties after exposure to natural weathering or artificial light
95.99
ISO 4665-2:1985
Rubber, vulcanized — Resistance to weathering — Part 2: Methods of exposure to natural weathering
95.99
ISO 4665-3:1987
Rubber, vulcanized — Resistance to weathering — Part 3: Methods of exposure to artificial light
95.99
ISO 4665:1998
Rubber, vulcanized and thermoplastic — Resistance to weathering
95.99
ISO 4665:2006
Rubber, vulcanized or thermoplastic — Resistance to weathering
95.99
ISO 4665:2016
Rubber, vulcanized or thermoplastic — Resistance to weathering
60.60
ISO 4666-1:1982
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 1: Basic principles
95.99
ISO 4666-1:2010
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 1: Basic principles
90.93
ISO 4666-2:1982
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 2: Rotary flexometer
95.99
ISO 4666-2:2008
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 2: Rotary flexometer
95.99
ISO 4666-3:1982
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer
95.99
ISO 4666-3:2010
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)
95.99
ISO 4666-3:2016
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)
60.60
ISO 4666-4:2007
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 4: Constant-stress flexometer
95.99
ISO 4666-4:2018
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 4: Constant-stress flexometer
60.60
ISO 5478:1990
Rubber — Determination of styrene content — Nitration method
95.99
ISO 5478:2006
Rubber — Determination of styrene content — Nitration method
95.99
ISO 5600:1986
Rubber — Determination of adhesion to rigid materials using conical shaped parts
95.99
ISO 5600:2007
Rubber — Determination of adhesion to rigid materials using conical shaped parts
95.99
ISO 5600:2011
Rubber — Determination of adhesion to rigid materials using conical shaped parts
95.99
ISO 5600:2017
Rubber — Determination of adhesion to rigid materials using conical shaped parts
60.60
ISO 5603:1986
Rubber, vulcanized — Determination of adhesion to wire cord
95.99
ISO 5603:2007
Rubber, vulcanized — Determination of adhesion to wire cord
95.99
ISO 5603:2011
Rubber, vulcanized — Determination of adhesion to wire cord
95.99
ISO 5603:2017
Rubber, vulcanized — Determination of adhesion to wire cord
60.60
ISO 5893:1985
Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Description
95.99
ISO 5893:1993
Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Description
95.99
ISO 5893:2002
Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
95.99
ISO 5893:2019
Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
60.60
ISO 5945:1989
Rubber — Determination of polyisoprene content
95.99
ISO 6056:1987
Rubber, vulcanized or thermoplastic — Determination of compression stress relaxation (rings)
95.99
ISO 6101-1:1991
Rubber — Determination of metal content by atomic absorption spectrometry — Part 1: Determination of zinc content
90.92
ISO 6101-2:1997
Rubber — Determination of metal content by atomic absorption spectrometry — Part 2: Determination of lead content
90.92
ISO 6101-3:1997
Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content
95.99
ISO 6101-3:2014
Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content
90.60
ISO 6101-4:1997
Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content
95.99
ISO 6101-4:2014
Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content
90.60
ISO 6101-5:1990
Rubber — Determination of metal content by atomic absorption spectrometry — Part 5: Determination of iron content
95.99
ISO 6101-5:2006
Rubber — Determination of metal content by atomic absorption spectrometry — Part 5: Determination of iron content
95.99
ISO 6101-5:2018
Rubber — Determination of metal content by atomic absorption spectrometry — Part 5: Determination of iron content
60.60
ISO 6101-6:2011
Rubber — Determination of metal content by atomic absorption spectrometry — Part 6: Determination of magnesium content
95.99
ISO 6101-6:2018
Rubber — Determination of metal content by atomic absorption spectrometry — Part 6: Determination of magnesium content
60.60
ISO/FDIS 6101-1
Rubber — Determination of metal content by atomic absorption spectrometry — Part 1: Determination of zinc content
50.20
ISO/FDIS 6101-2
Rubber — Determination of metal content by atomic absorption spectrometry — Part 2: Determination of lead content
50.20
ISO 6133:1981
Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
95.99
ISO 6133:1998
Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
95.99
ISO 6133:2015
Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
60.60
ISO 6179:1989
Vulcanized rubber sheet, and fabrics coated with vulcanized rubber — Determination of transmission rate of volatile liquids (Gravimetric technique)
95.99
ISO 6179:1998
Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics — Determination of transmission rate of volatile liquids (gravimetric technique)
95.99
ISO 6179:2010
Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics — Determination of transmission rate of volatile liquids (gravimetric technique)
95.99
ISO 6179:2017
Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics — Determination of transmission rate of volatile liquids (gravimetric technique)
60.60
ISO 6225-1:1984
Rubber, raw, natural — Determination of castor oil content — Part 1: Determination of castor oil glycerides content — Thin layer chromatographic method
95.99
ISO 6471:1983
Rubber, vulcanized — Determination of crystallization effects under compression
95.99
ISO 6471:1994
Rubber, vulcanized — Determination of crystallization effects under compression
95.99
ISO 6502-1:2018
Rubber — Measurement of vulcanization characteristics using curemeters — Part 1: Introduction
60.60
ISO 6502-2:2018
Rubber — Measurement of vulcanization characteristics using curemeters — Part 2: Oscillating disc curemeter
60.60
ISO 6502-3:2018
Rubber — Measurement of vulcanization characteristics using curemeters — Part 3: Rotorless curemeter
60.60
ISO 6502:1983
Rubber — Measurement of vulcanization characteristics with rotorless curemeters
95.99
ISO 6502:1991
Rubber — Measurement of vulcanization characteristics with rotorless curemeters
95.99
ISO 6502:1999
Rubber — Guide to the use of curemeters
95.99
ISO 6502:2016
Rubber — Guide to the use of curemeters
95.99
ISO 6505:1984
Rubber, vulcanized — Determination of adhesion to, and corrosion of, metals
95.99
ISO 6505:1997
Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and to corrode metals
95.99
ISO 6505:2005
Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals
95.99
ISO 6505:2015
Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals
60.60
ISO 6528-1:1992
Rubber — Determination of total sulfur content — Part 1: Oxygen combustion flask method
95.99
ISO 6528-2:1992
Rubber — Determination of total sulfur content — Part 2: Sodium peroxide fusion method
95.99
ISO 6528-3:1988
Rubber — Determination of total sulfur content — Part 3: Furnace combustion method
95.99
ISO 6914:1985
Rubber, vulcanized — Determination of ageing characteristics by measurement of stress at a given elongation
95.99
ISO 6914:2004
Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation
95.99
ISO 6914:2008
Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation in tension
95.99
ISO 6914:2013
Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation in tension
90.92
ISO/CD 6914
Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation in tension
30.20
ISO 6943:1984
Rubber, vulcanized — Determination of tension fatigue
95.99
ISO 6943:2007
Rubber, vulcanized — Determination of tension fatigue
95.99
ISO 6943:2011
Rubber, vulcanized — Determination of tension fatigue
95.99
ISO 6943:2017
Rubber, vulcanized — Determination of tension fatigue
60.60
ISO 7267-1:1986
Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method
95.99
ISO 7267-1:1997
Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method
95.99
ISO 7267-1:2008
Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method
95.99
ISO 7267-1:2017
Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method
95.99
ISO 7267-2:1986
Rubber-covered rollers — Determination of apparent hardness — Part 2: Shore-type durometer method
95.99
ISO 7267-2:2008
Rubber-covered rollers — Determination of apparent hardness — Part 2: Shore-type durometer method
95.99
ISO 7267-3:1988
Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method
95.99
ISO 7267-3:2007
Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method
95.99
ISO 7267-3:2011
Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method
95.99
ISO 7267-3:2017
Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method
95.99
ISO 7269:1995
Rubber — Determination of free sulfur
90.93
ISO 7269:1995/Cor 1:2002
Rubber — Determination of free sulfur — Technical Corrigendum 1
60.60
ISO 7270-1:2003
Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
90.92
ISO 7270-1:2003/Amd 1:2010
Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends) — Amendment 1
60.60
ISO 7270-2:2005
Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
95.99
ISO 7270-2:2012
Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
90.93
ISO/FDIS 7270-1
Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
50.00
ISO 7323:1985
Rubber, raw and unvulcanized compounded — Determination of plasticity number and recovery number — Parallel plate method
95.99
ISO 7323:1985/Cor 1:2003
Rubber, raw and unvulcanized compounded — Determination of plasticity number and recovery number — Parallel plate method — Technical Corrigendum 1
95.99
ISO 7323:2006
Rubber, raw and unvulcanized compounded — Determination of plasticity number and recovery number — Parallel-plate method
90.93
ISO 7619-1:2004
Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)
95.99
ISO 7619-1:2004/Amd 1:2008
Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness) — Amendment 1: Precision data
95.99
ISO 7619-1:2010
Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)
95.99
ISO 7619-2:2004
Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 2: IRHD pocket meter method
95.99
ISO 7619-2:2010
Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 2: IRHD pocket meter method
95.99
ISO 7619:1986
Rubber — Determination of indentation hardness by means of pocket hardness meters
95.99
ISO 7619:1997
Rubber — Determination of indentation hardness by means of pocket hardness meters
95.99
ISO 7725:1991
Rubber and rubber products — Determination of bromine and chlorine content — Oxygen flask combustion technique
90.92
ISO/PRF 7725
Rubber and rubber products — Determination of chlorine and bromine content
50.00
ISO 7743:1989
Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
95.99
ISO 7743:1989/Cor 1:1990
Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties — Technical Corrigendum 1
95.99
ISO 7743:2004
Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
95.99
ISO 7743:2008
Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
95.99
ISO 7743:2011
Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
95.99
ISO 7743:2017
Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
60.60
ISO 7781:1996
Rubber, raw styrene-butadiene — Determination of soap and organic-acid content
95.99
ISO 7781:2001
Styrene-butadiene rubber, raw — Determination of soap and organic-acid content
95.99
ISO 8013:1988
Rubber, vulcanized — Determination of creep in compression or shear
95.99
ISO 8013:2006
Rubber, vulcanized — Determination of creep in compression or shear
95.99
ISO 8013:2012
Rubber, vulcanized — Determination of creep in compression or shear
95.99
ISO 8013:2019
Rubber, vulcanized — Determination of creep in compression or shear
60.60
ISO 8053:1995
Rubber and latex — Determination of copper content — Photometric method
90.93
ISO 8054:1996
Rubber, compounded or vulcanized — Determination of sulfide sulfur content — Iodometric method
95.99
ISO 9026:1991
Raw rubber or unvulcanized compounds — Determination of green strength
95.99
ISO 9026:2007
Raw rubber or unvulcanized compounds — Determination of green strength
90.93
ISO 9028:1989
Rubber — Dissolution by acid digestion
95.99
ISO 9028:2006
Rubber — Dissolution by acid digestion
90.60
ISO/TR 9272:1986
Rubber and rubber products — Determination of precision for test method standards
95.99
ISO/TR 9272:2005
Rubber and rubber products — Determination of precision for test method standards
95.99
ISO/TR 9474:1993
Rubber and rubber products — Determination of accuracy and bias of chemical test methods
95.99
ISO 9924-1:2000
Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
95.99
ISO 9924-1:2016
Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
60.60
ISO 9924-2:2000
Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers
95.99
ISO 9924-2:2000/Amd 1:2012
Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers — Amendment 1
95.99
ISO 9924-2:2016
Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers
60.60
ISO 9924-3:2009
Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction
90.60
ISO 10398:1998
Rubber — Identification of accelerators in cured and uncured compounds
90.93
ISO 10638:2010
Rubber — Identification of antidegradants by gas chromatography/mass spectrometry
95.99
ISO 10638:2017
Rubber — Identification of antidegradants by gas chromatography/mass spectrometry
60.60
ISO 11089:1997
Rubber, raw synthetic — Determination of anti-degradants by high-performance liquid chromatography
95.99
ISO 11345:1997
Rubber — Assessment of carbon black dispersion — Rapid comparative methods
95.99
ISO 11345:2006
Rubber — Assessment of carbon black and carbon black/silica dispersion — Rapid comparative methods
90.60
ISO 11346:1997
Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use from an Arrhenius plot
95.99
ISO 11346:2004
Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use
95.99
ISO 11346:2014
Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use
90.60
ISO/TR 11753:1992
Rubber and rubber products — Confidence intervals of repeatability and reproducibility values determined by inter-laboratory tests
95.99
ISO/TR 12134:2010
Rubber — Estimation of uncertainty for test methods — Non-functional parameters
60.60
ISO 12244:1997
Rubber, vulcanized or thermoplastic — Determination of elongation, creep and tension set at constant load
95.99
ISO 12493:2011
Rubber, vulcanized — Determination of stress in tension upon heating
95.99
ISO 12493:2017
Rubber, vulcanized — Determination of stress in tension upon heating
60.60
ISO 13145:2012
Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
90.93
ISO 13226:1999
Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
95.99
ISO 13226:2005
Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
95.99
ISO 13226:2005/Cor 1:2007
Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers — Technical Corrigendum 1
95.99
ISO 13226:2011
Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
95.99
ISO 13226:2018
Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
60.60
ISO 14309:2011
Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity
95.99
ISO 14309:2019
Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity
60.60
ISO 15113:1999
Rubber — Determination of frictional properties
95.99
ISO 15113:1999/Cor 1:2001
Rubber — Determination of frictional properties — Technical Corrigendum 1
95.99
ISO 15113:2005
Rubber — Determination of frictional properties
90.93
ISO 15671:2000
Rubber and rubber additives — Determination of total sulfur content using an automatic analyser
90.92
ISO/DIS 15671
Rubber and rubber products — Determination of total sulfur content using an automatic analyser
40.20
ISO 15672:2000
Rubber and rubber additives — Determination of total nitrogen content using an automatic analyser
90.93
ISO 16565:2002
Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
95.99
ISO 16565:2008
Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
95.99
ISO 17257:2013
Rubber — Identification of polymers — Pyrolytic gas-chromatographic method using mass-spectrometric detection
90.92
ISO/FDIS 17257
Rubber — Identification of polymers — Pyrolytic gas-chromatographic method using mass-spectrometric detection
50.00
ISO 17564:2001
Nitrile rubber — Determination of residual unsaturation in hydrogenated nitrile rubber (HNBR) by iodine value
95.99
ISO/TS 17796:2013
Rubber — Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection
90.60
ISO 18517:2005
Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide
95.99
ISO 18517:2015
Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide
95.99
ISO 18766:2014
Rubber, vulcanized or thermoplastic — Low temperature testing — General introduction and guide
90.93
ISO 18898:2006
Rubber — Calibration and verification of hardness testers
95.99
ISO 18898:2012
Rubber — Calibration and verification of hardness testers
95.99
ISO 18898:2016
Rubber — Calibration and verification of hardness testers
95.99
ISO 18899:2004
Rubber — Guide to the calibration of test equipment
95.99
ISO 18899:2013
Rubber — Guide to the calibration of test equipment
90.93
ISO 19003:2006
Rubber and rubber products — Guidance on the application of statistics to physical testing
90.93
ISO 19004:2004
Rubber and rubber products — Determination of the sensitivity of test methods
95.99
ISO 19050:2015
Rubber, raw, vulcanised — Determination of metal content by ICP-OES
60.60
ISO 19242:2015
Rubber — Determination of total sulfur content by ion chromatography
60.60
ISO 19983:2017
Rubber — Determination of precision of test methods
90.92
ISO/CD 19983
Rubber — Determination of precision of test methods
30.99
ISO 19984-1:2017
Rubber and rubber products — Determination of biobased content — Part 1: General principles and calculation methods using the formulation of the rubber compound
60.60
ISO 19984-2:2017
Rubber and rubber products — Determination of biobased content — Part 2: Biobased carbon content
60.60
ISO 19984-3:2017
Rubber and rubber products — Determination of biobased content — Part 3: Biobased mass content
60.60
ISO 20163:2019
Vulcanized rubber — Determination of free sulfur by gas chromatography (GC) and high performance liquid chromatography (HPLC)
60.60
ISO 20463:2018
Rubber and rubber products — Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials
60.60
ISO/DIS 21490
Rubber and rubber products — Determination of 2-Mercaptobenzothiazole content by high performance liquid chromatography (HPLC)
40.20
ISO/CD 22746
Rubber, Vulcanized — Determination of dynamic properties — Glass transition temperature (Tg)
30.98
ISO/DIS 23075
Vulcanized rubbers — Determination of antidegradants by high-performance liquid chromatography
40.20
ISO 23233:2009
Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc
95.99
ISO 23233:2016
Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc
60.60
ISO 23233:2016/Amd 1:2017
Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc — Amendment 1
60.60
ISO 23337:2007
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine
95.99
ISO 23337:2016
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine
60.60
ISO 23529:2004
Rubber — General procedures for preparing and conditioning test pieces for physical test methods
95.99
ISO 23529:2010
Rubber — General procedures for preparing and conditioning test pieces for physical test methods
95.99
ISO 23529:2016
Rubber — General procedures for preparing and conditioning test pieces for physical test methods
60.60
ISO 23794:2003
Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance
95.99
ISO 23794:2010
Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance
95.99
ISO 23794:2015
Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance
60.60
ISO/CD 24087
Vulcanized rubbers — Differential scanning calorimetry (DSC) — Determination of the glass transition temperature and enthalpy
30.00
ISO 24453:2008
Rubber — Acquisition and presentation of comparable single-point data
90.93
ISO 24454:2008
Rubber — Acquisition and presentation of comparable multi-point data
90.93
ISO 27588:2008
Rubber, vulcanized or thermoplastic — Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
95.99
ISO 27588:2012
Rubber, vulcanized or thermoplastic — Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
95.99
ISO 27727:2008
Rubber, vulcanized — Measurement of fatigue crack growth rate
90.93

No matching records found