Standard and/or project under the direct responsibility of ISO/TC 29/SC 10 Secretariat | Stage | ICS |
---|---|---|
ISO 691:1983 [Withdrawn]
Wrench and socket openings -- Metric series -- Tolerances for general use
|
95.99 | |
ISO 691:1997 [Withdrawn]
Assembly tools for screws and nuts -- Wrench and socket openings -- Tolerances for general use
|
95.99 | |
Assembly tools for screws and nuts -- Wrench and socket openings -- Tolerances for general use
|
90.93 | |
ISO 1085:1986 [Withdrawn]
Assembly tools for screws and nuts -- Double-ended wrenches -- Size pairing
|
95.99 | |
ISO 1085:1999 [Withdrawn]
Assembly tools for screws and nuts -- Double-ended wrenches -- Size pairing
|
95.99 | |
Assembly tools for screws and nuts -- Double-ended wrenches -- Size pairing
|
60.60 | |
ISO 1173:1988 [Withdrawn]
Assembly tools for bolts and screws -- Hexagon drive ends for hand- and machine-operated screwdriver bits
|
95.99 | |
Assembly tools for screws and nuts -- Drive ends for hand- and machine-operated screwdriver bits and connecting parts -- Dimensions, torque testing
|
90.93 | |
ISO 1174:1975 [Withdrawn]
Assembly tools for bolts and screws -- Driving squares for power socket wrenches and hand socket wrenches
|
95.99 | |
ISO 1174-1:1996 [Withdrawn]
Assembly tools for screws and nuts -- Driving squares -- Part 1: Driving squares for hand socket tools
|
95.99 | |
Assembly tools for screws and nuts -- Driving squares -- Part 1: Driving squares for hand socket tools
|
90.93 | |
Assembly tools for screws and nuts -- Driving squares -- Part 2: Driving squares for power socket tools
|
90.93 | |
ISO 1703:1983 [Withdrawn]
Assembly tools for screws and nuts -- Nomenclature
|
95.99 | |
ISO 1703:2005 [Withdrawn]
Assembly tools for screws and nuts -- Designation and nomenclature
|
95.99 | |
Assembly tools for screws and nuts -- Nomenclature
|
60.60 | |
ISO 1711:1975 [Withdrawn]
Hand operated wrenches and sockets -- Technical specifications
|
95.99 | |
ISO 1711-1:1996 [Withdrawn]
Assembly tools for screws and nuts -- Technical specifications -- Part 1: Hand-operated wrenches and sockets
|
95.99 | |
ISO 1711-1:2007 [Withdrawn]
Assembly tools for screws and nuts -- Technical specifications -- Part 1: Hand-operated wrenches and sockets
|
95.99 | |
ISO 1711-1:2015 [Withdrawn]
Assembly tools for screws and nuts -- Technical specifications -- Part 1: Hand-operated wrenches and sockets
|
95.99 | |
Assembly tools for screws and nuts -- Technical specifications -- Part 1: Hand-operated wrenches and sockets
|
60.60 | |
ISO 1711-1:2016/DAmd 1 [Under development]
|
40.60 | |
ISO 1711-2:2005 [Withdrawn]
Assembly tools for screws and nuts -- Technical specifications -- Part 2: Machine-operated sockets ("impact")
|
95.99 | |
ISO 1711-2:2015 [Withdrawn]
Assembly tools for screws and nuts -- Technical specifications -- Part 2: Machine-operated sockets (impact)
|
95.99 | |
Assembly tools for screws and nuts -- Technical specifications -- Part 2: Machine-operated sockets (impact)
|
60.60 | |
ISO 1711-2:2016/DAmd 1 [Under development]
|
40.60 | |
Assembly tools for screws and nuts -- Forged and tubular socket wrenches -- Maximum outside head dimensions
|
90.93 | |
ISO 2351:1986 [Withdrawn]
Screwdriver bits for slotted head screws, with male hexagon drive
|
95.99 | |
ISO 2351-1:2002 [Withdrawn]
Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 1: Screwdriver bits for slotted head screws
|
95.99 | |
Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 1: Screwdriver bits for slotted head screws
|
90.93 | |
Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 2: Screwdriver bits for cross-recessed head screws
|
90.93 | |
ISO 2351-3:2002 [Withdrawn]
Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 3: Screwdriver bits for hexagon socket screws
|
95.99 | |
Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 3: Screwdriver bits for hexagon socket screws
|
90.20 | |
ISO 2352:1982 [Withdrawn]
Spiral ratchet screwdriver ends
|
95.99 | |
ISO 2352:2000 [Withdrawn]
Assembly tools for screws and nuts -- Spiral ratchet screwdriver ends -- Dimensions
|
95.99 | |
ISO 2380:1979 [Withdrawn]
Screwdriver blades for slotted head screws
|
95.99 | |
ISO 2380-1:1989 [Withdrawn]
Screwdrivers for slotted-head screws -- Part 1: Tips for hand- and machine-operated screwdrivers
|
95.99 | |
ISO 2380-1:1997 [Withdrawn]
Assembly tools for screws and nuts -- Screwdrivers for slotted-head screws -- Part 1: Tips for hand- and machine-operated screwdrivers
|
95.99 | |
Assembly tools for screws and nuts -- Screwdrivers for slotted-head screws -- Part 1: Tips for hand- and machine-operated screwdrivers
|
90.93 | |
ISO 2380-2:1992 [Withdrawn]
Screwdrivers for slotted-head screws -- Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
95.99 | |
ISO 2380-2:2000 [Withdrawn]
Assembly tools for screws and nuts -- Screwdrivers for slotted-head screws -- Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
95.99 | |
Assembly tools for screws and nuts -- Screwdrivers for slotted-head screws -- Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
90.20 | |
ISO 2725:1987 [Withdrawn]
Assembly tools for screws and nuts -- Machine- and hand-operated square drive sockets -- Metric series
|
95.99 | |
ISO 2725-1:1996 [Withdrawn]
Assembly tools for screws and nuts -- Square drive sockets -- Part 1: Hand-operated sockets -- Dimensions
|
95.99 | |
ISO 2725-1:2007 [Withdrawn]
Assembly tools for screws and nuts -- Square drive sockets -- Part 1: Hand-operated sockets
|
95.99 | |
ISO 2725-1:2015 [Withdrawn]
Assembly tools for screws and nuts -- Square drive sockets -- Part 1: Hand-operated sockets
|
95.99 | |
Assembly tools for screws and nuts -- Square drive sockets -- Part 1: Hand-operated sockets
|
60.60 | |
ISO 2725-2:1996 [Withdrawn]
Assembly tools for screws and nuts -- Square drive sockets -- Part 2: Machine-operated sockets ("impact") -- Dimensions
|
95.99 | |
ISO 2725-2:2007 [Withdrawn]
Assembly tools for screws and nuts -- Square drive sockets -- Part 2: Machine-operated sockets ("impact")
|
95.99 | |
ISO 2725-2:2015 [Withdrawn]
Assembly tools for screws and nuts -- Square drive sockets -- Part 2: Machine-operated sockets ("impact")
|
95.99 | |
Assembly tools for screws and nuts -- Square drive sockets -- Part 2: Machine-operated sockets ("impact")
|
60.60 | |
ISO 2725-3:2001 [Withdrawn]
Assembly tools for screws and nuts -- Square drive sockets -- Part 3: Machine-operated sockets ("non-impact") -- Dimensions
|
95.99 | |
ISO 2725-3:2015 [Withdrawn]
Assembly tools for screws and nuts -- Square drive sockets -- Part 3: Machine-operated sockets ("non-impact")
|
95.99 | |
Assembly tools for screws and nuts -- Square drive sockets -- Part 3: Machine-operated sockets ("non-impact")
|
60.60 | |
ISO 2726:1995 [Withdrawn]
Woodworking tools -- Metal-bodied bench planes, plane cutters and cap irons
|
95.99 | |
ISO 2936:1983 [Withdrawn]
Assembly tools for screws and nuts -- Hexagon socket screw keys -- Metric series
|
95.99 | |
ISO 2936:1995 [Withdrawn]
Assembly tools for screws and nuts -- Hexagon socket screw keys
|
95.99 | |
ISO 2936:2001 [Withdrawn]
Assembly tools for screws and nuts -- Hexagon socket screw keys
|
95.99 | |
ISO 2936:2001/Cor 1:2007 [Withdrawn]
|
95.99 | |
Assembly tools for screws and nuts -- Hexagon socket screw keys
|
60.60 | |
ISO 3109:1984 [Withdrawn]
Assembly tools for screws and nuts -- Hexagon insert bits for hexagon socket head screws
|
95.99 | |
ISO 3315:1988 [Withdrawn]
Assembly tools for screws and nuts -- Driving parts for hand-operated square drive socket wrenches -- Torque testing
|
95.99 | |
ISO 3315:1996 [Withdrawn]
Assembly tools for screws and nuts -- Driving parts for hand-operated square drive socket wrenches -- Dimensions and tests
|
95.99 | |
ISO 3315:2011 [Withdrawn]
Assembly tools for screws and nuts -- Driving parts for hand-operated square drive socket wrenches -- Dimensions and tests
|
95.99 | |
Assembly tools for screws and nuts -- Driving parts for hand-operated square drive socket wrenches -- Dimensions and tests
|
60.60 | |
ISO 3316:1988 [Withdrawn]
Assembly tools for screws and nuts -- Attachments for hand-operated square drive socket wrenches -- Torque testing
|
95.99 | |
ISO 3316:1996 [Withdrawn]
Assembly tools for screws and nuts -- Attachments for hand-operated square drive socket wrenches -- Dimensions and tests
|
95.99 | |
ISO 3316:2012 [Withdrawn]
Assembly tools for screws and nuts -- Attachments for hand-operated square drive socket wrenches -- Dimensions and tests
|
95.99 | |
Assembly tools for screws and nuts -- Attachments for hand-operated square drive socket wrenches -- Dimensions and tests
|
60.60 | |
ISO 3317:1974 [Withdrawn]
Assembly tools for screws and nuts -- Square drive extension hexagon insert, for power socket wrenches
|
95.99 | |
ISO 3317:2009 [Withdrawn]
Assembly tools for screws and nuts -- Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
|
95.99 | |
Assembly tools for screws and nuts -- Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
|
60.60 | |
ISO 3318:1990 [Withdrawn]
Assembly tools for screws and nuts -- Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches -- Maximum widths of heads
|
95.99 | |
ISO 3318:2009 [Withdrawn]
Assembly tools for screws and nuts -- Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches -- Maximum widths of heads
|
95.99 | |
Assembly tools for screws and nuts -- Open-ended wrenches, box wrenches and combination wrenches -- Maximum widths of heads
|
60.60 | |
Spanners and wrenches -- Spline drive ends for power socket wrenches
|
90.93 | |
ISO 4229:1977 [Withdrawn]
Assembly tools for screws and nuts -- Single-head engineer's wrenches -- Gaps from 50 to 120 mm
|
95.99 | |
ISO 4229:2009 [Withdrawn]
Assembly tools for screws and nuts -- Single-head engineer's wrenches for lower torque applications -- Maximum outside dimensions of heads and test torques
|
95.99 | |
Assembly tools for screws and nuts -- Single-head engineer's wrenches for lower torque applications -- Maximum outside dimensions of heads and test torques
|
60.60 | |
ISO 5742:1982 [Withdrawn]
Pliers and nippers -- Nomenclature
|
95.99 | |
Pliers and nippers -- Nomenclature
|
90.93 | |
ISO 5743:1988 [Withdrawn]
Pliers and nippers -- General technical requirements
|
95.99 | |
Pliers and nippers -- General technical requirements
|
90.60 | |
ISO 5744:1988 [Withdrawn]
Pliers and nippers -- Methods of test
|
95.99 | |
Pliers and nippers -- Methods of test
|
90.93 | |
ISO 5745:1988 [Withdrawn]
Pliers and nippers -- Pliers for gripping and manipulating -- Dimensions and test values
|
95.99 | |
Pliers and nippers -- Pliers for gripping and manipulating -- Dimensions and test values
|
90.93 | |
ISO 5746:1988 [Withdrawn]
Pliers and nippers -- Engineer's and lineman's pliers -- Dimensions and test values
|
95.99 | |
Pliers and nippers -- Engineer's and "Lineman's" pliers -- Dimensions and test values
|
90.60 | |
Pliers and nippers -- Lever assisted side cutting pliers, end and diagonal cutting nippers -- Dimensions and test values
|
90.93 | |
ISO 5748:1988 [Withdrawn]
Pliers and nippers -- End cutting nippers -- Dimensions and test values
|
95.99 | |
Pliers and nippers -- End cutting nippers -- Dimensions and test values
|
90.60 | |
ISO 5749:1988 [Withdrawn]
Pliers and nippers -- Diagonal cutting nippers -- Dimensions and test values
|
95.99 | |
Pliers and nippers -- Diagonal cutting nippers -- Dimensions and test values
|
90.60 | |
ISO 6787:1982 [Withdrawn]
Assembly tools for screws and nuts -- Adjustable wrenches -- Width across flats up to 50 mm
|
95.99 | |
ISO 6787:2001 [Withdrawn]
Assembly tools for screws and nuts -- Adjustable wrenches
|
95.99 | |
Assembly tools for screws and nuts -- Adjustable wrenches
|
60.60 | |
ISO 6788:1982 [Withdrawn]
Assembly tools for screws and nuts -- Four-way socket wrenches
|
95.99 | |
Assembly tools for screws and nuts -- Four-way socket wrenches -- Dimensions and torque test
|
90.93 | |
ISO 6789:1982 [Withdrawn]
Assembly tools for screws and nuts -- Hand torque tools -- Requirements and test methods
|
95.99 | |
ISO 6789:1992 [Withdrawn]
Assembly tools for screws and nuts -- Hand torque tools -- Requirements and test methods
|
95.99 | |
ISO 6789:2003 [Withdrawn]
Assembly tools for screws and nuts -- Hand torque tools -- Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
|
95.99 | |
Assembly tools for screws and nuts -- Hand torque tools -- Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
|
60.60 | |
Assembly tools for screws and nuts -- Hand torque tools -- Part 2: Requirements for calibration and determination of measurement uncertainty
|
60.60 | |
ISO 7738:1987 [Withdrawn]
Combination wrenches -- Minimum length
|
95.99 | |
ISO 7738:1990 [Withdrawn]
Spanners and wrenches -- Combination wrenches -- Minimum length and thickness of heads
|
95.99 | |
ISO 7738:2001 [Withdrawn]
Assembly tools for screws and nuts -- Combination wrenches -- Lengths of wrenches and maximum thickness of heads
|
95.99 | |
Assembly tools for screws and nuts -- Combination wrenches -- Lengths of wrenches and maximum thickness of heads
|
60.60 | |
ISO 7855:1985 [Withdrawn]
Torque wrenches -- Test method
|
95.99 | |
ISO 8764:1989 [Withdrawn]
Driver points to fit cross-recessed head screws
|
95.99 | |
ISO 8764-1:1992 [Withdrawn]
Screwdrivers for cross-recessed head screws -- Part 1: Driver points
|
95.99 | |
ISO 8764-1:1999 [Withdrawn]
Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws -- Part 1: Driver points
|
95.99 | |
Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws -- Part 1: Driver tips
|
90.93 | |
ISO 8764-2:1992 [Withdrawn]
Screwdrivers for cross-recessed head screws -- Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
95.99 | |
Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws -- Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
90.20 | |
ISO 8976:1988 [Withdrawn]
Pliers and nippers -- Multiple slip joint pliers -- Dimensions and test values
|
95.99 | |
Pliers and nippers -- Multiple slip joint pliers -- Dimensions and test values
|
90.60 | |
ISO 8979:1988 [Withdrawn]
Pliers and nippers for electronics -- Nomenclature
|
95.99 | |
Pliers and nippers for electronics -- Nomenclature
|
90.93 | |
Pliers and nippers -- Construction worker's pincers -- Dimensions and test values
|
90.93 | |
Pliers and nippers -- Carpenter's pincers -- Dimensions and test values
|
90.93 | |
ISO 9343:1988 [Withdrawn]
Pliers and nippers -- Slip joint pliers -- Dimensions and test values
|
95.99 | |
Pliers and nippers -- Slip joint pliers -- Dimensions and test values
|
90.60 | |
ISO 9654:1989 [Withdrawn]
Pliers and nippers for electronics -- Single-purpose nippers -- Cutting nippers
|
95.99 | |
Pliers and nippers for electronics -- Single-purpose nippers -- Cutting nippers
|
90.93 | |
ISO 9655:1989 [Withdrawn]
Pliers and nippers for electronics -- Single-purpose pliers -- Pliers for gripping and manipulating
|
95.99 | |
Pliers and nippers for electronics -- Single-purpose pliers -- Pliers for gripping and manipulating
|
90.93 | |
ISO 9656:1989 [Withdrawn]
Pliers and nippers for electronics -- Test methods
|
95.99 | |
Pliers and nippers for electronics -- Test methods
|
90.93 | |
ISO 9657:1989 [Withdrawn]
Pliers and nippers for electronics -- General technical requirements
|
95.99 | |
Pliers and nippers for electronics -- General technical requirements
|
90.93 | |
ISO 10102:1990 [Withdrawn]
Assembly tools for screws and nuts -- Double-headed open-ended engineers' wrenches
|
95.99 | |
ISO 10102:2001 [Withdrawn]
Assembly tools for screws and nuts -- Double-headed open-ended engineers' wrenches -- Length of wrenches and thickness of the heads
|
95.99 | |
Assembly tools for screws and nuts -- Double-headed open-ended engineers' wrenches -- Outside dimensions
|
60.60 | |
ISO 10103:1990 [Withdrawn]
Assembly tools for screws and nuts -- Double-headed, flat and offset, box wrenches
|
95.99 | |
ISO 10103:2001 [Withdrawn]
Assembly tools for screws and nuts -- Double-headed, flat and offset, box wrenches -- Length of wrenches and thickness of the heads
|
95.99 | |
Assembly tools for screws and nuts -- Doubled-headed box wrenches, flat and offset -- Outside dimensions and test torques
|
60.60 | |
ISO 10104:1990 [Withdrawn]
Assembly tools for screws and nuts -- Double-headed, deep offset and modified offset, box wrenches
|
95.99 | |
ISO 10104:2001 [Withdrawn]
Assembly tools for screws and nuts -- Double-headed, deep offset and modified offset, box wrenches -- Length of wrenches and thickness of the heads
|
95.99 | |
Assembly tools for screws and nuts -- Double-headed box wrenches, deep offset and modified offset -- Outside dimensions
|
60.60 | |
Assembly tools for screws and nuts -- Sockets and wrenches for spline drive
|
90.93 | |
Socket wrenches for spark- and glow-plugs
|
90.93 | |
Hammers -- Technical specifications concerning steel hammer heads -- Test procedures
|
90.93 | |
ISO/DIS 21982 [Under development]
Assembly tools for screws and nuts -- Ratcheting wrenches -- Technical requirements
|
40.00 |
No matching records found