• Filter:

  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 29/SC 9 Secretariat Stage ICS
ISO 235:1980
Parallel shank jobber and stub series drills and Morse taper shank drills
95.99
ISO 235:1980/Cor 1:1996
Parallel shank jobber and stub series drills and Morse taper shank drills — Technical Corrigendum 1
95.99
ISO 235:2016
Parallel shank jobber and stub series drills and Morse taper shank drills
60.60
ISO 236-1:1976
Hand reamers
90.93
ISO 236-2:2013
Reamers — Part 2: Long fluted machine reamers with Morse taper shanks
90.93
ISO 237:1975
Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares
90.93
ISO 238:2016
Reduction sleeves and extension sockets for tools with Morse taper shanks
60.60
ISO 239:1999
Drill chuck tapers
90.93
ISO 240:1994
Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
95.99
ISO 240:2016
Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
60.60
ISO 241:1975
Shanks for turning and planing tools — Types and dimensions of the section
95.99
ISO 241:1994
Shanks for turning and planing tools — Shapes and dimensions of the section
90.93
ISO 242:1975
Carbide tips for brazing on turning tools
95.99
ISO 242:2014
Carbide tips for brazing on turning tools
90.20
ISO 243:1975
Turning tools with carbide tips — External tools
95.99
ISO 243:2014
Turning tools with carbide tips — External tools
90.20
ISO 296:1991
Machine tools — Self-holding tapers for tool shanks
90.93
ISO 297:1988
7/24 tapers for tool shanks for manual changing
90.93
ISO 494:1975
Parallel shank twist drills — Long series
95.99
ISO 494:2009
Cylindrical shank twist drills — Long series
95.99
ISO 494:2017
Cylindrical shank twist drills — Long series
60.60
ISO 504:1975
Turning tools with carbide tips — Designation and marking
90.93
ISO 513:1975
Application of carbides for machining by chip removal — Designation of the main groups of chip removal and groups of application
95.99
ISO 513:1991
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application
95.99
ISO 513:1991/Cor 1:1994
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application — Technical Corrigendum 1
95.99
ISO 513:2004
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
95.99
ISO 513:2012
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
90.93
ISO 514:1975
Turning tools with carbide tips — Internal tools
95.99
ISO 514:2014
Turning tools with carbide tips — Internal tools
90.20
ISO 521:1975
Machine chucking reamers with parallel shanks or Morse taper shanks
95.99
ISO 521:2011
Machine chucking reamers with cylindrical shanks and Morse taper shanks
90.93
ISO 522:1975
Special tolerances for reamers
90.93
ISO 529:1993
Short machine taps and hand taps
95.99
ISO 529:2017
Short machine taps and hand taps
60.60
ISO 839-1:2006
Milling machine arbors with 7/24 tapers — Part 1: Dimensions and designation
90.93
ISO 839-2:1977
Milling machine arbors with 7/24 tapers — Part 2: Accessories
90.93
ISO 866:1975
Centre drills for centre holes without protecting chamfers — Type A
95.99
ISO 866:2016
Centre drills for centre holes without protecting chamfers — Type A
60.60
ISO 883:1985
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
95.99
ISO 883:2013
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
90.93
ISO 1080:1975
Machine tools — Morse taper shanks — Cotter slots with taper keys
90.93
ISO 1641-1:2003
End mills and slot drills — Part 1: Milling cutters with cylindrical shanks
95.99
ISO 1641-1:2016
End mills and slot drills — Part 1: Milling cutters with cylindrical shanks
60.60
ISO 1641-2:1978
End mills and slot drills — Part 2: Milling cutters with Morse taper shanks
95.99
ISO 1641-2:2011
End mills and slot drills — Part 2: Dimensions and designation of milling cutters with Morse taper shanks
90.93
ISO 1641-3:2003
End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks
95.99
ISO 1641-3:2011
End mills and slot drills — Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
90.93
ISO 1832:1985
Indexable inserts for cutting tools — Designation
95.99
ISO 1832:1991
Indexable inserts for cutting tools — Designation
95.99
ISO 1832:1991/Amd 1:1999
Indexable inserts for cutting tools — Designation — Amendment 1: Tolerance on d and m of V-shape inserts
95.99
ISO 1832:2004
Indexable inserts for cutting tools — Designation
95.99
ISO 1832:2004/Cor 1:2005
Indexable inserts for cutting tools — Designation — Technical Corrigendum 1
95.99
ISO 1832:2012
Indexable inserts for cutting tools — Designation
95.99
ISO 1832:2017
Indexable inserts for cutting tools — Designation
60.60
ISO 2238:1972
Machine bridge reamers
95.99
ISO 2238:2011
Machine bridge reamers
95.99
ISO 2238:2018
Machine bridge reamers
60.60
ISO 2250:1972
Finishing reamers for morse and metric tapers, with parallel shanks and morse taper shanks
95.99
ISO 2250:2009
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
95.99
ISO 2250:2017
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
60.60
ISO 2283:2000
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in — Reduced shank taps
90.93
ISO 2284:1987
Hand taps for parallel and taper pipe threads — General dimensions and marking
95.99
ISO 2284:2017
Hand taps for parallel and taper pipe threads — General dimensions and marking
60.60
ISO 2296:1972
Metal slitting saws with fine and coarse teeth — Metric series
95.99
ISO 2296:2011
Metal slitting saws with fine and coarse teeth — Metric series
95.99
ISO 2296:2018
Metal slitting saws with fine and coarse teeth — Metric series
60.60
ISO 2306:1972
Drills for use prior to tapping screw threads
90.93
ISO 2336-2:2006
Hacksaw blades — Part 2: Dimensions for machine blades
90.93
ISO 2402:1972
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
90.93
ISO 2540:1973
Centre drills for centre holes with protecting chamfer — Type B
95.99
ISO 2540:2016
Centre drills for centre holes with protecting chamfer — Type B
60.60
ISO 2541:1972
Centre drills for centre holes with radius form — Type R
95.99
ISO 2541:2016
Centre drills for centre holes with radius form — Type R
60.60
ISO 2568:1988
Hand- and machine-operated circular screwing dies and hand-operated die stocks
90.93
ISO 2584:1972
Cylindrical cutters with plain bore and key drive — Metric series
95.99
ISO 2584:2016
Cylindrical cutters with plain bore and key drive — Metric series
60.60
ISO 2585:1972
Slotting cutters with plain bore and key drive — Metric series
90.93
ISO 2586:1985
Shell end mills with plain bore and tenon drive — Metric series
90.93
ISO 2587:1972
Side and face milling cutters with plain bore and key drive — Metric series
90.93
ISO 2780:2006
Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series
95.99
ISO 2780:2018
Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series
60.60
ISO 2857:1973
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
90.93
ISO 2857:1973/Amd 1:1984
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1
60.60
ISO 2857:1973/Amd 2:1986
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2
60.60
ISO 2857:1973/Cor 1:1990
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Technical Corrigendum 1
60.60
ISO 2924:1973
Solid and segmental circular saws for cold cutting of metals — Interchangeability dimensions of the drive — Saw diameter range 224 to 2 240 mm
90.93
ISO 2935:1974
Circular saw blades for woodworking — Dimensions
90.93
ISO 2940-1:1974
Milling cutters mounted on centring arbors having a 7/24 taper — Fitting dimensions — Centring arbors
90.93
ISO 2940-2:1974
Milling cutters mounted on centring arbors having a 7/24 taper — Inserted tooth cutters
90.93
ISO 3286:1976
Single point cutting tools — Corner radii
95.99
ISO 3286:2016
Single point cutting tools — Corner radii
60.60
ISO 3291:1995
Extra-long Morse taper shank twist drills
95.99
ISO 3291:2016
Extra-long Morse taper shank twist drills
60.60
ISO 3292:1995
Extra-long parallel shank twist drills
95.99
ISO 3292:2016
Extra-long parallel shank twist drills
60.60
ISO 3293:1975
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
95.99
ISO 3293:2016
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
60.60
ISO 3294:1975
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
95.99
ISO 3294:2016
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
60.60
ISO 3295:1975
Narrow bandsaw blades for woodworking — Dimensions
90.93
ISO 3314:1975
Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive
90.93
ISO 3337:2000
T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
90.93
ISO 3338-1:1996
Cylindrical shanks for milling cutters — Part 1: Dimensional characteristics of plain cylindrical shanks
90.93
ISO 3338-2:2013
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
90.93
ISO 3338-3:1996
Cylindrical shanks for milling cutters — Part 3: Dimensional characteristics of threaded shanks
90.93
ISO 3364:1985
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
95.99
ISO 3364:1997
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
95.99
ISO 3364:2011
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
95.99
ISO 3364:2017
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
60.60
ISO 3365:1985
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
95.99
ISO 3365:2016
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
60.60
ISO 3438:2003
Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
95.99
ISO 3438:2013
Subland twist drills for holes prior to tapping screw threads
90.93
ISO 3439:2003
Subland twist drills with cylindrical shanks for holes prior to tapping screw threads
95.99
ISO 3465:1975
Hand taper pin reamers
90.93
ISO 3466:1975
Machine taper pin reamers with parallel shanks
95.99
ISO 3466:2016
Machine taper pin reamers with parallel shanks
60.60
ISO 3467:1975
Machine taper pin reamers with Morse taper shanks
95.99
ISO 3467:2016
Machine taper pin reamers with Morse taper shanks
60.60
ISO 3685:1993
Tool-life testing with single-point turning tools
90.93
ISO 3855:1977
Milling cutters — Nomenclature
90.93
ISO 3855:1977/Cor 1:1996
Milling cutters — Nomenclature — Technical Corrigendum 1
60.60
ISO 3859:2000
Inverse dovetail cutters and dovetail cutters with cylindrical shanks
90.93
ISO 3860:1976
Bore cutters with key drive — Form milling cutters with constant profile
95.99
ISO 3860:2011
Bore cutters with key drive — Form milling cutters with constant profile
90.93
ISO 3936:1993
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
90.93
ISO 3937-1:2008
Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper
90.93
ISO 3937-2:2008
Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper
90.93
ISO 3937-3:2008
Cutter arbors with tenon drive — Part 3: Dimensions of hollow taper interface with flange contact surface
90.93
ISO 3940:1977
Tapered die-sinking cutters with parallel shanks
90.60
ISO 4202:2016
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
60.60
ISO 4203:1978
Parallel shank tools — Driving tenons and sockets — Dimensions
95.99
ISO 4204:1977
Countersinks, 90 degrees, with Morse taper shanks and detachable pilots
95.99
ISO 4204:2016
Countersinks, 90°, with Morse taper shanks and detachable pilots
60.60
ISO 4205:1991
Countersinks, 90 degrees, with parallel shanks and solid pilots
95.99
ISO 4205:2016
Countersinks, 90°, with parallel shanks and solid pilots
60.60
ISO 4206:1991
Counterbores with parallel shanks and solid pilots
95.99
ISO 4206:2016
Counterbores with parallel shanks and solid pilots
60.60
ISO 4207:1977
Counterbores with Morse taper shanks and detachable pilots
95.99
ISO 4207:2016
Counterbores with Morse taper shanks and detachable pilots
60.60
ISO 4208:1977
Detachable pilots for use with counterbores and 90 degrees countersinks — Dimensions
95.99
ISO 4230:1987
Hand- and machine-operated circular screwing dies for taper pipe threads — R series
95.99
ISO 4230:2016
Hand- and machine-operated circular screwing dies for taper pipe threads — R series
60.60
ISO 4231:1987
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series
95.99
ISO 4231:2016
Hand- and machine-operated circular screwing dies for parallel pipe threads — G series
60.60
ISO 4248:1978
Jig bushes — Definitions and nomenclature
90.93
ISO 4875-1:1978
Metal cutting band saw blades — Part 1: Definitions and terminology
95.99
ISO 4875-1:2006
Metal-cutting band saw blades — Part 1: Vocabulary
90.93
ISO 4875-2:1978
Metal cutting band saw blades — Part 2: Basic dimensions and tolerances
95.99
ISO 4875-2:2006
Metal-cutting band saw blades — Part 2: Characteristics and dimensions
90.93
ISO 5396:1977
Hardmetal heading dies — Terminology
90.93
ISO 5407:1981
As-sintered hardmetal pellets used in heading dies — Dimensions and tolerances
90.93
ISO 5413:1993
Machine tools — Positive drive of Morse tapers
90.93
ISO 5414-1:2002
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 1: Dimensions of the driving system of tool shanks
90.93
ISO 5414-2:2002
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designation
90.93
ISO 5415:2007
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
90.93
ISO 5419:1982
Twist drills — Terms, definitions and types
90.93
ISO 5419:1982/Cor 1:1996
Twist drills — Terms, definitions and types — Technical Corrigendum 1
60.60
ISO 5420:1983
Reamers — Terms, definitions and types
90.93
ISO 5421:1977
Ground high speed steel tool bits
90.93
ISO 5468:2006
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
95.99
ISO 5468:2017
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
60.60
ISO 5608:1989
Turning and copying tool holders and cartridges for indexable inserts — Designation
95.99
ISO 5608:1995
Turning and copying tool holders and cartridges for indexable inserts — Designation
95.99
ISO 5608:2012
Turning and copying tool holders and cartridges for indexable inserts — Designation
90.93
ISO 5609-1:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 1: Designation, styles, dimensions and calculation for corrections
90.93
ISO 5609-2:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 2: Style F
90.93
ISO 5609-3:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 3: Style K
90.93
ISO 5609-4:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 4: Style L
90.93
ISO 5609-5:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 5: Style U
90.93
ISO 5609-6:2012
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 6: Style Q
90.93
ISO 5609:1985
Boring bars for indexable inserts — Dimensions
95.99
ISO 5609:1989
Boring bars for indexable inserts — Dimensions
95.99
ISO 5609:1989/Amd 1:1993
Boring bars for indexable inserts — Dimensions — Amendment 1
95.99
ISO 5609:1995
Boring bars for indexable inserts — Dimensions
95.99
ISO 5609:1998
Boring bars for indexable inserts — Dimensions
95.99
ISO 5610-10:2010
Tool holders with rectangular shank for indexable inserts — Part 10: Style N
95.99
ISO 5610-10:2014
Tool holders with rectangular shank for indexable inserts — Part 10: Style N
90.20
ISO 5610-11:2010
Tool holders with rectangular shank for indexable inserts — Part 11: Style R
95.99
ISO 5610-11:2014
Tool holders with rectangular shank for indexable inserts — Part 11: Style R
90.20
ISO 5610-12:2010
Tool holders with rectangular shank for indexable inserts — Part 12: Style S
95.99
ISO 5610-12:2014
Tool holders with rectangular shank for indexable inserts — Part 12: Style S
90.20
ISO 5610-13:2010
Tool holders with rectangular shank for indexable inserts — Part 13: Style T
95.99
ISO 5610-13:2014
Tool holders with rectangular shank for indexable inserts — Part 13: Style T
90.20
ISO 5610-14:2010
Tool holders with rectangular shank for indexable inserts — Part 14: Style H
95.99
ISO 5610-14:2014
Tool holders with rectangular shank for indexable inserts — Part 14: Style H
90.20
ISO 5610-15:2010
Tool holders with rectangular shank for indexable inserts — Part 15: Style V
95.99
ISO 5610-15:2014
Tool holders with rectangular shank for indexable inserts — Part 15: Style V
90.20
ISO 5610-1:2010
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
95.99
ISO 5610-1:2014
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
90.20
ISO 5610-2:2010
Tool holders with rectangular shank for indexable inserts — Part 2: Style A
95.99
ISO 5610-2:2014
Tool holders with rectangular shank for indexable inserts — Part 2: Style A
90.20
ISO 5610-3:2010
Tool holders with rectangular shank for indexable inserts — Part 3: Style B
95.99
ISO 5610-3:2014
Tool holders with rectangular shank for indexable inserts — Part 3: Style B
90.20
ISO 5610-4:2010
Tool holders with rectangular shank for indexable inserts — Part 4: Style D
95.99
ISO 5610-4:2014
Tool holders with rectangular shank for indexable inserts — Part 4: Style D
90.20
ISO 5610-5:2010
Tool holders with rectangular shank for indexable inserts — Part 5: Style F
95.99
ISO 5610-5:2014
Tool holders with rectangular shank for indexable inserts — Part 5: Style F
90.20
ISO 5610-6:2010
Tool holders with rectangular shank for indexable inserts — Part 6: Style G
95.99
ISO 5610-6:2014
Tool holders with rectangular shank for indexable inserts — Part 6: Style G
90.20
ISO 5610-7:2010
Tool holders with rectangular shank for indexable inserts — Part 7: Style J
95.99
ISO 5610-7:2014
Tool holders with rectangular shank for indexable inserts — Part 7: Style J
90.20
ISO 5610-8:2010
Tool holders with rectangular shank for indexable inserts — Part 8: Style K
95.99
ISO 5610-8:2014
Tool holders with rectangular shank for indexable inserts — Part 8: Style K
90.20
ISO 5610-9:2010
Tool holders with rectangular shank for indexable inserts — Part 9: Style L
95.99
ISO 5610-9:2014
Tool holders with rectangular shank for indexable inserts — Part 9: Style L
90.20
ISO 5610:1985
Single point tool holders for turning and copying, for indexable inserts — Dimensions
95.99
ISO 5610:1989
Single-point tool holders for turning and copying, for indexable inserts — Dimensions
95.99
ISO 5610:1989/Amd 1:1993
Single-point tool holders for turning and copying, for indexable inserts — Dimensions — Amendment 1
95.99
ISO 5610:1995
Single-point tool holders for turning and copying, for indexable inserts — Dimensions
95.99
ISO 5610:1998
Single-point tool holders for turning and copying, for indexable inserts — Dimensions
95.99
ISO 5611-10:2015
Cartridges, type A, for indexable inserts — Part 10: Style U
60.60
ISO 5611-11:2015
Cartridges, type A, for indexable inserts — Part 11: Style W
60.60
ISO 5611-12:2015
Cartridges, type A, for indexable inserts — Part 12: Style Y
60.60
ISO 5611-1:2015
Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions
60.60
ISO 5611-2:2015
Cartridges, type A, for indexable inserts — Part 2: Style F
60.60
ISO 5611-3:2015
Cartridges, type A, for indexable inserts — Part 3: Style G
60.60
ISO 5611-4:2015
Cartridges, type A, for indexable inserts — Part 4: Style J
60.60
ISO 5611-5:2015
Cartridges, type A, for indexable inserts — Part 5: Style K
60.60
ISO 5611-6:2015
Cartridges, type A, for indexable inserts — Part 6: Style L
60.60
ISO 5611-7:2015
Cartridges, type A, for indexable inserts — Part 7: Style R
60.60
ISO 5611-8:2015
Cartridges, type A, for indexable inserts — Part 8: Style S
60.60
ISO 5611-9:2015
Cartridges, type A, for indexable inserts — Part 9: Style T
60.60
ISO 5611:1981/Add 1:1986
Cartridges, type A, for indexable inserts — Dimensions — Addendum 1
95.99
ISO 5611:1989
Cartridges, type A, for indexable inserts — Dimensions
95.99
ISO 5611:1995
Cartridges, type A, for indexable inserts — Dimensions
95.99
ISO 5967:1981
Taps and thread cutting — Nomenclature of the main types and terminology
90.93
ISO 5968:1981
Circular screwing dies — Terminology
90.93
ISO 5969:1979
Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion
90.93
ISO 5969:1979/Cor 1:1991
Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion — Technical Corrigendum 1
60.60
ISO 6108:1978
Double equal angle cutters with plain bore and key drive
95.99
ISO 6261:1984
Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation
95.99
ISO 6261:1995
Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation
95.99
ISO 6261:2011
Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation
95.99
ISO 6262-1:1982
End mills with indexable inserts — Part 1: End mills with flatted parallel shank
95.99
ISO 6262-1:2013
End mills with indexable inserts — Part 1: End mills with flatted cylindrical shank
90.93
ISO 6262-2:1982
End mills with indexable inserts — Part 2: End mills with Morse taper shank
95.99
ISO 6262-2:2013
End mills with indexable inserts — Part 2: End mills with Morse taper shank
90.93
ISO 6462:1983
Face milling cutters with indexable inserts — Dimensions
95.99
ISO 6462:2011
Face and shoulder milling cutters with indexable inserts — Dimensions
90.93
ISO 6986:1983
Side and face milling (slotting) cutters with indexable inserts — Dimensions
95.99
ISO 6986:2013
Side and face milling (slotting) cutters with indexable inserts — Dimensions
90.93
ISO 6987-1:1983
Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal clearance
95.99
ISO 6987-2:1990
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inserts with 11 degrees normal clearance
95.99
ISO 6987:1998
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions
95.99
ISO 6987:2012
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions
90.93
ISO/TR 6987-3:1990
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 3: V-shape inserts
95.99
ISO 7079:1981
Core drills with parallel shanks and with Morse taper shanks
95.99
ISO 7079:2016
Core drills with parallel shanks and with Morse taper shanks
60.60
ISO 7226:1988
Hexagonal dienuts
90.93
ISO 7294:1983
Saw teeth for woodworking saws — Profile shape — Terminology and designation
90.93
ISO 7388-1:1983
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions
95.99
ISO 7388-1:2007
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
90.92
ISO 7388-2:1984
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristics
95.99
ISO 7388-2:2007
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF
90.93
ISO 7388-3:2007
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
95.99
ISO 7388-3:2016
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
60.60
ISO 7406:1986
Bore type milling cutters for indexable inserts — Designation
95.99
ISO 7755-10:1984
Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)
95.99
ISO 7755-10:2013
Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)
90.93
ISO 7755-11:1984
Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)
95.99
ISO 7755-11:2013
Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)
90.93
ISO 7755-12:1984
Hardmetal burrs — Part 12: Inverted cone burrs (style N)
95.99
ISO 7755-12:2013
Hardmetal burrs — Part 12: Inverted cone burrs (style N)
90.93
ISO 7755-1:1984
Hardmetal burrs — Part 1: General specifications
95.99
ISO 7755-1:2013
Hardmetal burrs — Part 1: General specifications
90.93
ISO 7755-2:1984
Hardmetal burrs — Part 2: Cylindrical burrs (style A)
95.99
ISO 7755-2:2013
Hardmetal burrs — Part 2: Cylindrical burrs (style A)
90.93
ISO 7755-3:1984
Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)
95.99
ISO 7755-3:2013
Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)
90.93
ISO 7755-4:1984
Hardmetal burrs — Part 4: Spherical burrs (style D)
95.99
ISO 7755-4:2013
Hardmetal burrs — Part 4: Spherical burrs (style D)
90.93
ISO 7755-5:1984
Hardmetal burrs — Part 5: Oval burrs (style E)
95.99
ISO 7755-5:2013
Hardmetal burrs — Part 5: Oval burrs (style E)
90.93
ISO 7755-6:1984
Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)
95.99
ISO 7755-6:2013
Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)
90.93
ISO 7755-7:1984
Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)
95.99
ISO 7755-7:2013
Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)
90.93
ISO 7755-8:1984
Hardmetal burrs — Part 8: Flame burrs (style H)
95.99
ISO 7755-8:2013
Hardmetal burrs — Part 8: Flame burrs (style H)
90.93
ISO 7755-9:1984
Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
95.99
ISO 7755-9:2013
Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
90.93
ISO 7848:1986
Shank type milling cutters for indexable inserts — Designation
95.99
ISO 8051:1999
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess
95.99
ISO 8051:2016
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess
60.60
ISO 8688-1:1989
Tool life testing in milling — Part 1: Face milling
90.93
ISO 8688-2:1989
Tool life testing in milling — Part 2: End milling
90.93
ISO 8830:1991
High-speed steel machine taps with ground threads — Technical specifications
90.93
ISO 9270-1:2010
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF
90.93
ISO 9270-2:2010
7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF
90.93
ISO 9361-1:1991
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole
95.99
ISO 9361-1:2014
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole
90.20
ISO 9361-2:1991
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole
95.99
ISO 9361-2:2011
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole
90.93
ISO 9524:1993
Machine tools — Front faces of spindle holders for machining centres — Functional dimensions
90.93
ISO 9766:1990
Drills with indexable inserts — Cylindrical shanks with a parallel flat
95.99
ISO 9766:2012
Drills with indexable inserts — Cylindrical shanks with a parallel flat
90.93
ISO 10145-1:1993
End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank
95.99
ISO 10145-1:2016
End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank
60.60
ISO 10145-2:1993
End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank
95.99
ISO 10145-2:2016
End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank
60.60
ISO 10643:2009
Dimensions of accessories for cutter arbors with parallel key and tenon drive
90.93
ISO 10649-1:2013
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
90.93
ISO 10649-2:2013
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
90.93
ISO 10649-3:2013
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
90.93
ISO 10649-4:2013
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
90.93
ISO 10649-5:2012
Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
90.93
ISO 10649-6:2012
Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
90.93
ISO 10887:1999
Key type three-jaw drill chucks — Specification
90.93
ISO 10888:1999
Keyless type three-jaw drill chucks — Specification
90.93
ISO 10889-1:2004
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
90.93
ISO 10889-2:2016
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
60.60
ISO 10889-3:2016
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
60.60
ISO 10889-4:2016
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
60.60
ISO 10889-5:2016
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
60.60
ISO 10889-6:2016
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
60.60
ISO 10889-7:2016
Tool holders with cylindrical shank — Part 7: Type F with taper seat
60.60
ISO 10889-8:1997
Tool holders with cylindrical shank — Part 8: Type Z, accessories
90.93
ISO 10897:2016
Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts
60.60
ISO 10898:1992
Spot drills
95.99
ISO 10898:2016
Spot drills
60.60
ISO 10899:1996
High-speed steel two-flute twist drills — Technical specifications
90.93
ISO 10910:1995
Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
90.93
ISO 10911:1994
Solid hardmetal end mills with parallel shank — Dimensions
95.99
ISO 10911:2010
Solid hardmetal end mills with cylindrical shank — Dimensions
95.99
ISO 10911:2017
Solid hardmetal end mills with cylindrical shank — Dimensions
60.60
ISO 11054:1993
Cutting tools — Designation of high-speed steel groups
95.99
ISO 11054:2006
Cutting tools — Designation of high-speed steel groups
90.93
ISO/TR 11255:1994
Applicability of hard cutting materials for machining by chip removal — Information additional to ISO 513 designation
95.99
ISO 11529-1:1998
Milling cutters — Designation — Part 1: Shank type end mills of solid or tipped design
95.99
ISO 11529-1:2005
Milling cutters — Designation — Part 1: Shank-type end mills of solid or tipped design
95.99
ISO 11529-2:1998
Milling cutters — Designation — Part 2: Shank type and bore type milling cutters with indexable inserts
95.99
ISO 11529-2:2005
Milling cutters — Designation — Part 2: Shank-type and bore-type milling cutters with indexable inserts
95.99
ISO 11529:2013
Milling cutters — Designation — Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
90.93
ISO 12164-1:2001
Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions
90.93
ISO 12164-2:2001
Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions
90.92
ISO 12164-3:2014
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
90.92
ISO 12164-4:2014
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
90.92
ISO/AWI 12164-1
Hollow taper interface with flange contact surface — Part 1: Shanks of type AB, CB and EB
20.00
ISO/AWI 12164-3
Hollow taper interface with flange contact surface — Part 3: Shanks of type T, TA and U
20.00
ISO/WD 12164-2
Hollow taper interface with flange contact surface — Part 2: Receivers of type A, C and E for hollow taper shanks of type AB, CB and EB
20.20
ISO/WD 12164-4
Hollow taper interface with flange contact surface — Part 4: Receivers of type T and U for hollow taper shanks of type T, TA and U
20.20
ISO/WD 12164-5
Hollow taper interface with flange contact surface — Part 5: Shanks of type AS, CS and ES
20.20
ISO/WD 12164-6
Hollow taper interface with flange contact surface — Part 6: Receivers of type AS, CS and ES for hollow taper shanks of type AS, CS and ES
20.20
ISO 12197:1996
Woodruff keaseat cutters — Dimensions
95.99
ISO 12197:2016
Woodruff keyseat cutters — Dimensions
60.60
ISO 15488:2003
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
90.93
ISO 15641:2001
Milling cutters for high speed machining — Safety requirements
90.93
ISO 15917:2007
Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials — Dimensions
95.99
ISO 15917:2012
Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
90.93
ISO 16462:2004
Cubic boron nitride inserts, tipped or solid — Dimensions, types
95.99
ISO 16462:2014
Cubic boron nitride inserts, tipped or solid — Dimensions, types
90.93
ISO 16463:2004
Polycristalline diamond inserts, tipped — Dimensions, types
95.99
ISO 16463:2014
Polycristalline diamond inserts, tipped — Dimensions, types
90.93
ISO 22037:2007
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials — Dimensions
90.93
ISO 22180:2019
CVD diamond tools — Categorization
60.60
ISO/WD 22402-1
Medium-transfer units for tool interfaces — Part 1: Transfer units for hollow taper shanks in accordance with ISO 12164
20.20
ISO/WD 22402-2
Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with ISO 26623
20.20
ISO 26622-2:2008
Modular taper interface with ball track system — Part 2: Dimensions and designation of receivers
90.93
ISO 26623-1:2014
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
90.92
ISO 26623-2:2014
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
90.20
ISO/DIS 26623-1
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
40.99

No matching records found. Please try changing the filter settings.