Standards catalogue

ISO/TC 29/SC 8

Tools for pressing and moulding

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 29/SC 8 Secretariat Stage ICS
ISO 6751:1986 [Withdrawn]
Ejector pins with cylindrical head -- Dimensions
95.99
ISO 6751:1998 [Withdrawn]
Tools for moulding -- Ejector pins with cylindrical head
95.99
ISO 6751:2011
Tools for moulding -- Ejector pins with cylindrical head
90.93
ISO 6752:1984 [Withdrawn]
Round punches with 60 degrees conical head and straight shank
95.99
ISO 6752:2008
Tools for pressing -- Round punches with 60 degrees conical head and straight shank
90.93
ISO 6753:1982 [Withdrawn]
Machined plates for press tools, moulds, jigs and fixtures -- Nominal dimensions
95.99
ISO 6753-1:1994 [Withdrawn]
Tools for pressing and moulding -- Machined plates -- Part 1: Machined plates for press tools, jigs and fixtures
95.99
ISO 6753-1:2005
Tools for pressing and moulding -- Machined plates -- Part 1: Machined plates for press tools
90.93
ISO 6753-2:1998
Tools for pressing and moulding -- Machined plates -- Part 2: Machined plates for moulds
90.93
ISO 8017:1985 [Withdrawn]
Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered
95.99
ISO 8017:2007
Tools for moulding -- Guide pillars, straight and shouldered, and locating guide pillars, shouldered
90.93
ISO 8018:1985 [Withdrawn]
Mould guide bushes, headed, and locating guide bushes, headed
95.99
ISO 8018:2007
Tools for moulding -- Guide bushes, headed, and locating guide bushes, headed
90.93
ISO 8020:1986 [Withdrawn]
Punches with cylindrical head and reduced shank
95.99
ISO 8020:1992 [Withdrawn]
Tools for pressing -- Punches with cylindrical head and reduced shank
95.99
ISO 8020:2002
Tools for pressing -- Punches with cylindrical head and straight or reduced shank
90.20
ISO 8021:1986 [Withdrawn]
Round punches with cylindrical head and straight shank
95.99
ISO 8404:1986 [Withdrawn]
Angle pins -- Basic dimensions
95.99
ISO 8404:2003 [Withdrawn]
Tools for moulding -- Angle pins
95.99
ISO 8404:2013
Tools for moulding -- Angle pins
90.93
ISO 8405:1986 [Withdrawn]
Ejector sleeves with cylindrical head -- Basic series for general purposes
95.99
ISO 8405:1998 [Withdrawn]
Tools for moulding -- Ejector sleeves with cylindrical head -- Basic series for general purposes
95.99
ISO 8405:2013
Tools for moulding -- Ejector sleeves with cylindrical head -- Basic series for general purposes
90.93
ISO 8406:1991 [Withdrawn]
Mould bases -- Locating elements
95.99
ISO 8406:2001 [Withdrawn]
Tools for moulding -- Mould bases -- Round locating elements and spacers
95.99
ISO 8406:2008
Tools for moulding -- Mould bases -- Round locating elements and spacers
90.93
ISO 8693:1987 [Withdrawn]
Tools for moulding -- Flat ejector pins
95.99
ISO 8693:1998 [Withdrawn]
Tools for moulding -- Flat ejector pins
95.99
ISO 8693:2011
Tools for moulding -- Flat ejector pins
90.93
ISO 8694:1987 [Withdrawn]
Tools for moulding -- Shouldered ejector pins
95.99
ISO 8694:1998 [Withdrawn]
Tools for moulding -- Shouldered ejector pins
95.99
ISO 8694:2011
Tools for moulding -- Shouldered ejector pins
90.93
ISO 8695:1987 [Withdrawn]
Tools for pressing -- Punches -- Nomenclature and terminology
95.99
ISO 8695:2010
Tools for pressing -- Punches -- Nomenclature and terminology
90.93
ISO 8977:1987 [Withdrawn]
Tools for pressing -- Round matrixes
95.99
ISO 8977:2003
Tools for pressing -- Matrixes
90.20
ISO 8978:1987 [Withdrawn]
Tools for pressing -- Guides for round punches
95.99
ISO 9181:1990 [Withdrawn]
Tools for pressing -- Round punches with 60 degrees conical head and reduced shank
95.99
ISO 9181:2007
Tools for pressing -- Round punches with 60 degrees conical head and reduced shank
90.93
ISO 9182-1:1992 [Withdrawn]
Tools for pressing -- Guide pillars -- Part 1: Types
95.99
ISO 9182-1:2013
Tools for pressing -- Guide pillars -- Part 1: Types
90.20
ISO 9182-2:1992 [Withdrawn]
Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars
95.99
ISO 9182-2:2013
Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars
90.20
ISO 9182-3:1992 [Withdrawn]
Tools for pressing -- Guide pillars -- Part 3: Type B, end-locking pillars
95.99
ISO 9182-3:2013
Tools for pressing -- Guide pillars -- Part 3: Type B, end-locking pillars
90.20
ISO 9182-4:1992 [Withdrawn]
Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush
95.99
ISO 9182-4:2013
Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush
90.20
ISO 9182-5:1992 [Withdrawn]
Tools for pressing -- Guide pillars -- Part 5: Type D, end-locking pillars with flange
95.99
ISO 9182-5:2013
Tools for pressing -- Guide pillars -- Part 5: Type D, end-locking pillars with flange
90.20
ISO 9183-1:1990 [Withdrawn]
Tools for pressing -- Wear plates for press dies -- Part 1: Type A
95.99
ISO 9183-1:2008
Tools for pressing -- Wear plates for press dies -- Part 1: Type A
90.93
ISO 9183-2:1993 [Withdrawn]
Tools for pressing -- Wear plates for press dies -- Part 2: Type B
95.99
ISO 9183-2:2011
Tools for pressing -- Wear plates for press dies -- Part 2: Type B
90.93
ISO 9448-1:1991 [Withdrawn]
Tools for pressing -- Guide bushes -- Part 1: Forms
95.99
ISO 9448-1:2013
Tools for pressing -- Guide bushes -- Part 1: Forms
90.20
ISO 9448-2:1991 [Withdrawn]
Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1
95.99
ISO 9448-2:2013
Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1
90.20
ISO 9448-3:1991 [Withdrawn]
Tools for pressing -- Guide bushes -- Part 3: Form B, ball cage bushes, plain, type 1
95.99
ISO 9448-3:2013
Tools for pressing -- Guide bushes -- Part 3: Form B, ball cage bushes, plain, type 1
90.20
ISO 9448-4:1991 [Withdrawn]
Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1
95.99
ISO 9448-4:2013
Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1
90.20
ISO 9448-5:1991 [Withdrawn]
Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1
95.99
ISO 9448-5:2013
Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1
90.20
ISO 9448-6:1991 [Withdrawn]
Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1
95.99
ISO 9448-6:2013
Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1
90.20
ISO 9448-7:1991 [Withdrawn]
Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1
95.99
ISO 9448-7:2013
Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1
90.20
ISO 9448-8:1991 [Withdrawn]
Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1
95.99
ISO 9448-8:2013
Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1
90.20
ISO 9448-9:1992 [Withdrawn]
Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2
95.99
ISO 9448-9:2013
Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2
90.20
ISO 9448-10:1992 [Withdrawn]
Tools for pressing -- Guide bushes -- Part 10: Form E, gliding bushes, flanged, type 2
95.99
ISO 9448-10:2013
Tools for pressing -- Guide bushes -- Part 10: Form E, gliding bushes, flanged, type 2
90.20
ISO 9448-11:1992 [Withdrawn]
Tools for pressing -- Guide bushes -- Part 11: Form F, ball cage bushes, flanged, type 2
95.99
ISO 9448-11:2013
Tools for pressing -- Guide bushes -- Part 11: Form F, ball cage bushes, flanged, type 2
90.20
ISO 9449:1990 [Withdrawn]
Tools for moulding -- Centring sleeves
95.99
ISO 9449:2007
Tools for moulding -- Centring sleeves
90.93
ISO 10069-1:1991 [Withdrawn]
Tools for pressing -- Elastomer pressure springs -- Part 1: General specification
95.99
ISO 10069-1:2008
Tools for pressing -- Elastomer pressure springs -- Part 1: General specification
90.93
ISO 10069-2:1991 [Withdrawn]
Tools for pressing -- Elastomer pressure springs -- Part 2: Specification of accessories
95.99
ISO 10069-2:2008
Tools for pressing -- Elastomer pressure springs -- Part 2: Specification of accessories
90.93
ISO 10071:1991 [Withdrawn]
Tools for pressing -- Ball-lock punches
95.99
ISO 10071-1:2001 [Withdrawn]
Tools for pressing -- Ball-lock punches -- Part 1: Ball-lock punches for light duty
95.99
ISO 10071-1:2008
Tools for pressing -- Ball-lock punches -- Part 1: Ball-lock punches for light duty
90.93
ISO 10071-2:2005
Tools for pressing -- Ball-lock punches -- Part 2: Ball-lock punches for heavy duty
90.93
ISO 10072:1993 [Withdrawn]
Tools for moulding -- Sprue bushes -- Dimensions
95.99
ISO 10072:2004
Tools for moulding -- Sprue bushes -- Dimensions
90.20
ISO 10073:1991 [Withdrawn]
Tools for moulding -- Support pillars
95.99
ISO 10073:2008
Tools for moulding -- Support pillars
90.93
ISO 10242-1:1991 [Withdrawn]
Tools for pressing -- Punch holder shanks -- Part 1: Types A and B
95.99
ISO 10242-1:1998 [Withdrawn]
Tools for pressing -- Punch holder shanks -- Part 1: Type A
95.99
ISO 10242-1:2011
Tools for pressing -- Punch holder shanks -- Part 1: Type A
90.93
ISO 10242-2:1991 [Withdrawn]
Tools for pressing -- Punch holder shanks -- Part 2: Type C
95.99
ISO 10242-2:2008
Tools for pressing -- Punch holder shanks -- Part 2: Type C
90.93
ISO 10242-3:1991 [Withdrawn]
Tools for pressing -- Punch holder shanks -- Part 3: Type D
95.99
ISO 10242-3:2008
Tools for pressing -- Punch holder shanks -- Part 3: Type D
90.93
ISO 10243:1991 [Withdrawn]
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding
95.99
ISO 10243:2010
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding
90.92
60.60
ISO/FDIS 10243 [Under development]
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding
50.00
ISO 10907-1:1996 [Withdrawn]
Tools for moulding -- Locating rings -- Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds -- Types A and B
95.99
ISO 10907-1:2008
Tools for moulding -- Locating rings -- Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
90.93
ISO 10907-2:2007
Tools for moulding -- Locating rings -- Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
90.93
ISO 11415:1997
Tools for pressing -- Die sets
90.93
ISO 11900-1:1994 [Withdrawn]
Tools for pressing -- Ball-lock punch retainers -- Part 1: Types A and B, rectangular and square for light duty
95.99
ISO 11900-1:2007
Tools for pressing -- Ball-lock punch retainers -- Part 1: Types A and B, rectangular and square for light duty
90.93
ISO 11900-2:2001 [Withdrawn]
Tools for pressing -- Ball-lock punch retainers -- Part 2: Types C and D, reduced for light duty
95.99
ISO 11900-2:2008
Tools for pressing -- Ball-lock punch retainers -- Part 2: Types C and D, reduced for light duty
90.93
ISO 11900-3:2004
Tools for pressing -- Ball-lock punch retainers -- Part 3: Type E, reduced for heavy duty
90.20
ISO 11901-1:1995 [Withdrawn]
Tools for pressing -- Gas springs -- Part 1: General specifications
95.99
ISO 11901-1:2003
Tools for pressing -- Gas springs -- Part 1: General specifications
90.93
ISO 11901-2:1995 [Withdrawn]
Tools for pressing -- Gas springs -- Part 2: Specification of accessories
95.99
ISO 11901-2:2004 [Withdrawn]
Tools for pressing -- Gas springs -- Part 2: Specification of accessories
95.99
ISO 11901-2:2018
Tools for pressing -- Gas springs -- Part 2: Specification of accessories
60.60
ISO 11901-3:2014
Tools for pressing -- Gas springs -- Part 3: Gas spring with increased spring force and compact built height
90.20
ISO 11901-4:2014
Tools for pressing -- Gas springs -- Part 4: Gas springs with increased spring force and same built height
90.20
ISO 11903:1996 [Withdrawn]
Tools for pressing -- Guide pillar mountings
95.99
ISO 11903:2008
Tools for pressing -- Guide pillar mountings
90.93
ISO 12165:2000
Tools for moulding -- Components of compression and injection moulds and diecasting dies -- Terms and symbols
90.92
ISO/DIS 12165 [Under development]
Tools for moulding -- Components of compression and injection moulds and diecasting dies -- Terms and symbols
40.20
ISO 15600:2000
Tools for moulding -- Thermal insulating sheets for injection moulds
90.93
ISO 16366:2001 [Withdrawn]
Tools for pressing -- L-shaped guides
95.99
ISO 16366:2008
Tools for pressing -- L-shaped guides
90.93
ISO 16367:2001 [Withdrawn]
Tools for pressing -- Guide plates -- U- and V-blocks
95.99
ISO 16367:2008
Tools for pressing -- Guide plates -- U- and V-blocks
90.93
ISO 16915:2003
Tools for moulding -- Sprue pullers
90.93
ISO 16916:2004 [Withdrawn]
Tools for moulding -- Tool specification sheet for injection moulds
95.99
ISO 16916:2016
Tools for moulding -- Tool specification sheet for injection moulds
60.60
ISO 18084:2005 [Withdrawn]
Press tools for tablets -- Punches and dies
95.99
ISO 18084:2011
Press tools for tablets -- Punches and dies
90.93
ISO 20928:2018
Tools for pressing -- Spring plungers with helicoidal compression steel spring or gas spring
60.60
ISO 20929:2018
Tools for pressing -- Heel guidings in large stamping and forming dies
60.60
ISO/DIS 21223 [Under development]
Tools for pressing -- Vocabulary
40.99
ISO 23480:2008 [Withdrawn]
Tools for pressing -- Sliding plates
95.99
ISO 23480:2013
Tools for pressing -- Sliding plates
90.93
ISO 23481:2008 [Withdrawn]
Tools for pressing -- Cam driver plates
95.99
ISO 23481:2013
Tools for pressing -- Cam driver plates
90.20
ISO 24233:2008
Tools for moulding -- Tool specification sheet for diecasting dies
90.93
ISO 28238:2010
Compression and injection moulds -- Components for gating systems
90.93

No matching records found