• Filter:

  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 20/SC 10 Secretariat Stage ICS
ISO 11:1980
Aircraft — Pressure cabin ground test connections
95.99
ISO 11:1987
Aircraft — Ground pressure testing connections for pressure cabins
90.60
ISO 12:1976
Aerospace — Pipelines — Identification scheme
95.99
ISO 12:1987
Aerospace — Pipelines — Identification
90.93
ISO 45:1980
Aircraft — Pressure refuelling connections
95.99
ISO 102:1976
Aircraft — Gravity filling orifices
95.99
ISO 451:1976
Aircraft — Pressure re-oiling connection
90.20
ISO 485:1973
Aircraft water-methanol pressure connections
90.20
ISO 1022:1988
Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (old type) — Dimensions (Inch series) (Not valid for new designs)
95.99
ISO/R 1022:1969
Gaseous oxygen replenishment couplings for aircraft
95.99
ISO 1023:1974
Aircraft — High pressure air charging valves
90.60
ISO 1465:1976
Aircraft — Liquid oxygen replenishment couplings — Mating dimensions
95.99
ISO 1465:1989
Aircraft — Liquid oxygen replenishment couplings — Mating dimensions
90.20
ISO 1749:1973
Aircraft — Elastomeric sealing rings — Packaging and identification
95.99
ISO 2046:1973
Gaseous breathing oxygen supplies for aircraft
90.20
ISO 2434:1973
Compressed non-breathing air for use in aircraft
90.20
ISO 2435:1973
Nitrogen for use in aircraft
90.20
ISO 2563:1974
Aircraft ducting and piping — Profile dimensions for flanges of V-band couplings
95.99
ISO 2563:2009
Aircraft ducting and piping — Profile dimensions for flanges of V-band couplings
90.20
ISO 2964:1985
Aerospace — Tubing — Outside diameters and thicknesses — Metric dimensions
90.60
ISO 3174:1981
Aircraft — Connections for checking hydraulic systems by ground appliances
95.99
ISO 3174:1994
Aircraft — Connections for checking hydraulic systems by ground appliances — Threaded type
90.20
ISO 3323:1976
Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved
95.99
ISO 3323:1987
Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved
90.60
ISO 5859:1991
Aerospace — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
95.99
ISO 5859:2014
Aerospace series — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
90.60
ISO 5884:1987
Aerospace — Fluid systems and components — Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
95.99
ISO 5884:2018
Aerospace series — Fluid systems and components — Methods for system sampling and measuring the solid particle contamination in hydraulic fluids
60.60
ISO 5887:1981
Aircraft — Joints for connecting crew members' regulator masks to oxygen sources
90.60
ISO 6771:1981
Aerospace construction — Fluid systems and components — Pressure and temperature classifications
95.99
ISO 6771:1987
Aerospace — Fluid systems and components — Pressure and temperature classifications
95.99
ISO 6771:2007
Aerospace — Fluid systems and components — Pressure and temperature classifications
90.60
ISO 6772:1981
Aerospace fluid systems — Impulse testing of hydraulic hose, tubing and fittings assemblies
95.99
ISO 6772:1988
Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies
95.99
ISO 6772:2012
Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies
90.93
ISO 6773:1982
Aerospace fluid systems — Thermal shock testing of piping and fittings
95.99
ISO 6773:1994
Aerospace — Fluid systems — Thermal shock testing of piping and fittings
90.20
ISO 7169:1984
Aerospace construction — Separable tube fittings for fluid systems — General specification
95.99
ISO 7169:1993
Aerospace fluid systems — Separable tube fittings for 24 degrees cone — General specification
95.99
ISO 7169:1998
Aerospace — Separable tube fittings for fluid systems, 24 degrees cone — General specification
95.99
ISO 7169:2007
Aerospace — Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa — Procurement specification, inch/metric
95.99
ISO 7169:2014
Aerospace — Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa — Procurement specification, inch/metric
90.20
ISO 7257:1983
Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test
95.99
ISO 7257:2016
Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test
60.60
ISO 7258:1984
Polytetrafluoroethylene (PTFE) tubing for aerospace applications — Methods for the determination of the density and relative density
90.20
ISO 7313:1984
Aircraft — High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
90.93
ISO/DIS 7313
Aircraft — High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
40.98
ISO 7314:1989
Aerospace — Fluid systems — Hose assembly, metal
95.99
ISO 7314:1994
Aerospace — Fluid systems — Hose assembly, metal
95.99
ISO 7314:2002
Aerospace — Fluid systems — Metal hose assemblies
90.60
ISO 7315:1985
Aerospace — "P" clamps (loop clamps) for fluid tubing installations — Dimensions
95.99
ISO 7315:1988
Aerospace — "P" clamps (loop clamps) for fluid systems — Envelope dimensions
90.20
ISO 7319:1982
Aerospace construction — Fluid systems — Interface of metric couplings
95.99
ISO 7319:1992
Aerospace — Fluid systems — Interface of 24 degree cone metric couplings
90.60
ISO 7320:1985
Aerospace — Fluid systems port connection, seal and fitting end — Dimensions
95.99
ISO 7320:1992
Aerospace — Couplings, threaded and sealed, for fluid systems — Dimensions
90.60
ISO 7661:1984
Aerospace — Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing — Metric series
90.20
ISO 8153-1:2009
Aerospace fluid systems and components — Vocabulary — Part 1: Hose assemblies
90.20
ISO/DIS 8153-2
Aerospace fluid systems and components — Vocabulary — Part 2: Fittings and couplings
40.60
ISO 8177:1985
Aerospace — Omega clamps (saddle clamps) for fluid tubing installations — Dimensions
95.99
ISO 8177:1986
Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions
95.99
ISO 8177:2015
Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions
60.60
ISO 8278:1986
Aerospace — Hydraulic, pressure compensated, variable delivery pumps — General requirements
95.99
ISO 8278:2016
Aerospace series — Hydraulic, pressure compensated, variable delivery pumps — General requirements
60.60
ISO 8479:1986
Aerospace — "Q" clamps (centre-mounted clamps) for fluid systems — Dimensions
90.20
ISO 8574:1990
Aerospace — Hydraulic system tubing — Qualification tests
95.99
ISO 8574:2004
Aerospace — Hydraulic system tubing — Qualification tests for bent tubes
90.92
ISO/NP 8574
Aerospace — Hydraulic system tubing — Qualification tests for bent tubes
10.99
ISO 8575:1990
Aerospace — Fluid systems — Hydraulic system tubing
95.99
ISO 8575:2016
Aerospace — Fluid systems — Hydraulic system tubing
60.60
ISO 8625-1:1993
Aerospace — Fluid systems — Vocabulary — Part 1: General terms and definitions related to pressure
95.99
ISO 8625-1:2018
Aerospace — Fluid systems — Vocabulary — Part 1: General terms and definitions related to pressure
60.60
ISO 8625-2:1991
Aerospace — Fluid systems — Vocabulary — Part 2: General terms and definitions relating to flow
95.99
ISO 8625-2:2018
Aerospace — Fluid systems — Vocabulary — Part 2: General terms and definitions relating to flow
60.60
ISO 8625-3:1991
Aerospace — Fluid systems — Vocabulary — Part 3: General terms and definitions relating to temperature
95.99
ISO 8625-3:2018
Aerospace — Fluid systems — Vocabulary — Part 3: General terms and definitions relating to temperature
60.60
ISO 8625-4:2011
Aerospace — Fluid systems — Vocabulary — Part 4: General terms and definitions relating to control/actuation systems
90.93
ISO 8775:1988
Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (new type) — Dimensions (Inch series)
90.20
ISO 8829-1:2009
Aerospace — Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies — Part 1: Metallic (stainless steel) braid
90.20
ISO 8829-2:2006
Aerospace — Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies — Part 2: Non-metallic braid
90.20
ISO 8829:1990
Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies — Test methods
95.99
ISO 8913:1989
Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification
95.99
ISO 8913:1989/Cor 1:1990
Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification — Technical Corrigendum 1
95.99
ISO 8913:1994
Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification
95.99
ISO 8913:2006
Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) — Procurement specification
90.93
ISO 9206:1990
Aerospace — Constant displacement hydraulic motors — General specifications
95.99
ISO 9206:2016
Aerospace series — Constant displacement hydraulic motors — General specifications
95.99
ISO 9206:2018
Aerospace — Fixed displacement hydraulic motors — General specifications
60.60
ISO 9528:1989
Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification
95.99
ISO 9528:1989/Cor 1:1990
Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification — Technical Corrigendum 1
95.99
ISO 9528:1994
Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification
90.92
ISO/CD 9528
Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification
30.99
ISO 9538:1996
Aerospace — Hydraulic tubing joints and fittings — Planar flexure test
95.99
ISO 9538:2017
Aerospace series — Hydraulic tubing joints and fittings — Planar flexure test
60.60
ISO 9634:1994
Aerospace — Fluid systems — Dimensions of plastic protective caps and plugs
90.20
ISO 9679:2006
Aerospace — Clamps for fluid systems — Test methods
90.20
ISO 9938:1990
Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa — Procurement specification
95.99
ISO 9938:1994
Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa — Procurement specification
90.92
ISO/CD 9938
Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa — Procurement specification
30.99
ISO 9939:1994
Aerospace — Pressure re-oiling connection (new type)
90.20
ISO 9940:2015
Aerospace series — Fluid, hydraulic, phosphate ester-base, fire resistant — Technical specification
60.60
ISO 10502:1992
Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 degrees C and 10 500 kPa — Procurement specification
95.99
ISO 10502:2012
Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa — Technical specifications and requirements
90.93
ISO 10583:1993
Aerospace fluid systems — Test methods for tube/fitting assemblies
90.60
ISO 11217:1993
Aerospace — Hydraulic system fluid contamination — Location of sampling points and criteria for sampling
95.99
ISO 11218:1993
Aerospace — Cleanliness classification for hydraulic fluids
95.99
ISO 11218:2017
Aerospace — Cleanliness classification for hydraulic fluids
60.60
ISO 11639:2010
Aerospace — Part numbering for hose assemblies
90.93
ISO 12319:2006
Aerospace — 'P' (loop style) clamps — Procurement specification
90.20
ISO 12333:2000
Aerospace — Constant displacement hydraulic motors — General specifications for 35 000 kPa systems
95.99
ISO 12334:2000
Aerospace — Hydraulic, pressure-compensated, variable delivery pumps — General requirement for 35 000 kPa systems
95.99
ISO 12573:2010
Aircraft — Tubing tolerances — Inch series
90.93
ISO 12584:2013
Aerospace — Hydraulic fluid components — Expression of particulate contamination levels
90.60
ISO 14085-1:2015
Aerospace series — Hydraulic filter elements — Test methods — Part 1: Test sequence
60.60
ISO 14085-2:2015
Aerospace series — Hydraulic filter elements — Test methods — Part 2: Conditioning
60.60
ISO 14085-3:2015
Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity
60.60
ISO 14085-4:2015
Aerospace series — Hydraulic filter elements — Test methods — Part 4: Verification of collapse/burst pressure rating
60.60
ISO 14085-5:2015
Aerospace series — Hydraulic filter elements — Test methods — Part 5: Resistance to flow fatigue
60.60
ISO 14085-6:2015
Aerospace series — Hydraulic filter elements — Test methods — Part 6: Initial cleanliness level
60.60
ISO 16031-1:2002
Aerospace fluid systems — O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes — Part 1: Close tolerances for hydraulic systems
90.93
ISO 16031-2:2003
Aerospace fluid systems — O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes — Part 2: Standard tolerances for non-hydraulic systems
90.60
ISO 16682:2015
Aerospace series — Terminology for clamping devices
60.60
ISO 18170:2017
Aerospace series — AC induction electric motor driven, variable delivery, hydraulic pumps — General requirements
60.60
ISO 18387:2019
Aerospace — Linear hydraulic utility actuator — General specifications
60.60
ISO 18487-1:2017
Aerospace series — Titanium tube for 35 MPa operating pressure — Part 1: Inch series
60.60
ISO 19631:2015
Aerospace series — Tube fittings for fluid systems, 5 080 psi (35 000 kPa) — Qualification specification
60.60
ISO 19632:2015
Aerospace series — Fitting end, 24° internal cone, external thread, flareless type extra fine thread pitch inch series — Design standard
60.60
ISO/AWI 22056
Aerospace series - Lubrication filter elements - Test methods
20.00
ISO 22072:2005
Aerospace — Electrohydrostatic actuator (EHA) — Characteristics to be defined in procurement specifications
95.99
ISO 22072:2011
Aerospace — Electrohydrostatic actuator (EHA) — Characteristics to be defined in procurement specifications
90.93
ISO 22089:2009
Aerospace — Hydraulic power transfer units — General specifications
90.20
ISO/AWI 22181
Aerospace fluid systems and components — Variable displacement hydraulic motors
20.00
ISO 22431:2018
Aerospace series — Pipe coupling 8°30' — Dynamic beam seal end for ferrule, welded — Geometric configuration
60.60
ISO 22433:2018
Aerospace series — Pipe coupling 8°30' — Dynamic beam seal end for elbows, tees and crosses — Geometric configuration
60.60
ISO 22436:2018
Aerospace series — Pipe coupling 8°30' — Thread end — Geometric configuration
60.60
ISO 22437:2018
Aerospace series — Pipe coupling 8°30' in titanium alloy — Nut for welded ferrule
60.60
ISO 22438:2018
Aerospace series — Pipe coupling 8°30' in titanium alloy — Thrust wires
60.60
ISO 23748:2016
Aerospace series — O-ring grooves — Dimensions
60.60
ISO 23933:2006
Aerospace — Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) — Procurement specification
90.20
ISO 23935:2006
Aircraft — Environmental test procedures for airborne fluid system components — Resistance to fire in designated fire zones
90.20
ISO/CD 24567
Aerospace series — Pipe coupling 8°30' in titanium alloy — Thrust wire nuts
30.99
ISO/CD 24568
Aerospace series — Pipe coupling 8°30' up to 28 000 kPa Dynamic beam seal — Metric series technical specification
30.99
ISO 27996:2009
Aerospace fluid systems — Elastomer seals — Storage and shelf life
90.60

No matching records found. Please try changing the filter settings.