Subcommittee | Subcommittee Title | Published standards | Standards under development |
---|---|---|---|
ISO/TC 20/SC 1 | Aerospace electrical requirements | 62 | 115 |
ISO/TC 20/SC 4 | Aerospace fastener systems | 92 | 7 |
ISO/TC 20/SC 6 | Standard atmosphere | 8 | 3 |
ISO/TC 20/SC 8 | Aerospace terminology | 22 | 2 |
ISO/TC 20/SC 9 | Air cargo and ground equipment | 67 | 10 |
ISO/TC 20/SC 10 | Aerospace fluid systems and components | 81 | 8 |
ISO/TC 20/SC 13 | Space data and information transfer systems | 84 | 20 |
ISO/TC 20/SC 14 | Space systems and operations | 168 | 41 |
ISO/TC 20/SC 16 | Unmanned aircraft systems | 0 | 8 |
ISO/TC 20/SC 18 | Materials | 6 | 2 |
Standard and/or project under the direct responsibility of ISO/TC 20 Secretariat | Stage | ICS |
---|---|---|
ISO/R 10:1955 [Withdrawn]
Withdrawal of ISO/R 10-1955
|
95.99 | |
Aerospace -- Lever-operated, two-position, ON/OFF switches -- Directions of operation
|
90.93 | |
ISO/R 47:1957 [Withdrawn]
Withdrawal of ISO/R 47-1957
|
95.99 | |
ISO/R 103:1959 [Withdrawn]
Withdrawal of ISO/R 103-1959
|
95.99 | |
ISO/R 130:1959 [Withdrawn]
Withdrawal of ISO/R 130-1959
|
95.99 | |
ISO/R 222:1968 [Withdrawn]
Withdrawal of ISO/R 222-1961
|
95.99 | |
ISO 223:1975 [Withdrawn]
Withdrawal of ISO 223-1975
|
95.99 | |
ISO/TR 224:1998 [Withdrawn]
Aircraft -- Declaration of design and performance for aircraft equipment -- Standard form
|
95.99 | |
Aircraft -- Sealing wire
|
90.93 | |
ISO/R 267:1962 [Withdrawn]
Withdrawal of ISO/R 267-1962
|
95.99 | |
Aircraft -- Mechanical and electromechanical indicators -- General requirements
|
90.93 | |
Aircraft -- Heads of lubricating nipples
|
90.93 | |
ISO/R 414:1965 [Withdrawn]
Withdrawal of ISO/R 414-1965
|
95.99 | |
ISO/R 440:1969 [Withdrawn]
Withdrawal of ISO/R 440-1969
|
95.99 | |
ISO/R 443:1965 [Withdrawn]
Marking of aircraft gas cylinders
|
95.99 | |
ISO/R 469:1966 [Withdrawn]
Withdrawal of ISO/R 469-1966
|
95.99 | |
ISO/R 470:1966 [Withdrawn]
Withdrawal of ISO/R 470-1966
|
95.99 | |
ISO/R 474:1966 [Withdrawn]
Withdrawal of ISO/R 474-1966
|
95.99 | |
Aircraft -- Propulsion units and components -- Methods of numbering and describing direction of rotation
|
90.93 | |
ISO/R 539:1967 [Withdrawn]
Withdrawal of ISO/R 539-1967
|
95.99 | |
ISO/R 564:1967 [Withdrawn]
Withdrawal of ISO/R 564-1967
|
95.99 | |
ISO/R 634:1967 [Withdrawn]
Withdrawal of ISO/R 634-1964
|
95.99 | |
ISO/R 854:1968 [Withdrawn]
Withdrawal of ISO/R 854-1968
|
95.99 | |
Rolling bearings -- Airframe bearings -- Characteristics, boundary dimensions, tolerances, static load ratings
|
90.93 | |
Aircraft -- Engine nacelle fire extinguisher apertures and doors
|
90.93 | |
ISO/R 1075:1969 [Withdrawn]
Withdrawal of ISO/R 1075-1969
|
95.99 | |
ISO/R 1076:1969 [Withdrawn]
Withdrawal of ISO/R 1076-1969
|
95.99 | |
ISO/R 1077:1969 [Withdrawn]
Withdrawal of ISO/R 1077-1969
|
95.99 | |
ISO/R 1078:1969 [Withdrawn]
Withdrawal of ISO/R 1078-1969
|
95.99 | |
ISO 1151:1972 [Withdrawn]
Withdrawal of ISO 1151-1975
|
95.99 | |
ISO 1151-1:1985 [Withdrawn]
Flight dynamics -- Concepts, quantities and symbols -- Part 1: Aircraft motion relative to the air
|
95.99 | |
ISO 1151-2:1974 [Withdrawn]
Terms and symbols for flight dynamics -- Part 2: Motions of the aircraft and the atmosphere relative to the Earth
|
95.99 | |
ISO 1151-3:1972 [Withdrawn]
Terms and symbols for flight dynamics -- Part 3: Derivatives of forces, moments and their coefficients
|
95.99 | |
ISO 1151-4:1974 [Withdrawn]
Terms and symbols for flight dynamics -- Part 4: Concepts, quantities and symbols used in the study of aircraft stability and control
|
95.99 | |
ISO 1151-4:1974/Add 1:1986 [Withdrawn]
|
95.99 | |
ISO 1151-5:1974 [Withdrawn]
Terms and symbols for flight dynamics -- Part 5: Quantities used in measurements
|
95.99 | |
ISO 1152:1974 [Withdrawn]
Withdrawal of ISO 1152-1974
|
95.99 | |
ISO 1153:1972 [Withdrawn]
Withdrawal of ISO 1153-1972
|
95.99 | |
ISO/R 1220:1970 [Withdrawn]
Withdrawal of ISO/R 1220-1970
|
95.99 | |
ISO 1464:1979 [Withdrawn]
Aircraft -- Clearance dimensions for tripod jacks
|
95.99 | |
ISO/R 1468:1970 [Withdrawn]
Withdrawal of ISO/R 1468-1970
|
95.99 | |
ISO/R 1490:1970 [Withdrawn]
Withdrawal of ISO/R 1490-1970
|
95.99 | |
ISO/R 1491:1970 [Withdrawn]
Withdrawal of ISO/R 1491-1970
|
95.99 | |
ISO 1540:1977 [Withdrawn]
Aerospace -- Characteristics of aircraft electrical systems
|
95.99 | |
ISO/R 1799:1971 [Withdrawn]
Withdrawal of ISO/R 1799-1971
|
95.99 | |
ISO/R 1800:1971 [Withdrawn]
Withdrawal of ISO/R 1800-1971
|
95.99 | |
ISO 1963:1973 [Withdrawn]
Withdrawal of ISO 1963-1973
|
95.99 | |
Aircraft -- Accessory drives and mounting pads
|
90.93 | |
ISO 2020:1973 [Withdrawn]
Flexible steel wire rope for aircraft controls -- Technical specification
|
95.99 | |
ISO 2020:1984 [Withdrawn]
Aerospace -- Mechanical system parts -- Preformed flexible steel wire rope for aircraft controls -- Technical specification
|
95.99 | |
Aerospace -- Preformed flexible steel wire rope for aircraft controls -- Part 1: Dimensions and loads
|
90.93 | |
Aerospace -- Preformed flexible steel wire rope for aircraft controls -- Part 2: Technical specification
|
90.93 | |
ISO 2529:1973 [Withdrawn]
Aircraft -- Zones, access doors and panels -- Referencing system
|
95.99 | |
ISO 2650:1974 [Withdrawn]
Withdrawal of ISO 2650-1974
|
95.99 | |
ISO 2653-1:1975 [Withdrawn]
Environmental tests for aircraft equipment -- Part 1: Ice formation
|
95.99 | |
ISO 2655:1975 [Withdrawn]
Withdrawal of ISO 2655-1975
|
95.99 | |
ISO 2657:1976 [Withdrawn]
Withdrawal of ISO 2657-1976
|
95.99 | |
ISO 2658:1975 [Withdrawn]
Withdrawal of ISO 2658-1975
|
95.99 | |
Environmental tests for aircraft equipment -- Steady-state acceleration
|
90.93 | |
ISO 2669-1:1978 [Withdrawn]
Environmental tests for aircraft equipment -- Part 1: Steady state acceleration
|
95.99 | |
Environmental tests for aircraft equipment -- Part 3.4 : Acoustic vibration
|
90.93 | |
ISO 2676:1975 [Withdrawn]
Withdrawal of ISO 2676-1975
|
95.99 | |
ISO 2678-1:1977 [Withdrawn]
Environmental tests for aircraft equipment -- Part 1: Insulation resistance and high voltage tests for electrical equipment
|
95.99 | |
ISO 2684:1975 [Withdrawn]
Withdrawal of ISO 2684-1975
|
95.99 | |
ISO 2685:1992 [Withdrawn]
Aircraft -- Environmental conditions and test procedures for airborne equipment -- Resistance to fire in designated fire zones
|
95.99 | |
Aircraft -- Environmental test procedure for airborne equipment -- Resistance to fire in designated fire zones
|
90.93 | |
ISO/TR 2685:1984 [Withdrawn]
Aircraft -- Environmental conditions and test procedures for airborne equipment -- Resistance to fire in designated fire zones
|
95.99 | |
ISO 2764:1974 [Withdrawn]
Withdrawal of ISO 2764-1974
|
95.99 | |
ISO 2765:1974 [Withdrawn]
Withdrawal of ISO 2765-1974
|
95.99 | |
ISO 2964:1974 [Withdrawn]
Aircraft -- Tubing outside diameters and thicknesses -- Metric dimensions
|
95.99 | |
Aircraft -- Pressure fuel dispensing system -- Test procedure and limit value for shut-off surge pressure
|
90.93 | |
ISO 7137:1981 [Withdrawn]
Aircraft -- Environmental conditions and test procedures for airborne equipment
|
95.99 | |
ISO 7137:1987 [Withdrawn]
Aircraft -- Environmental conditions and test procedures for airborne equipment
|
95.99 | |
ISO 7137:1992 [Withdrawn]
Aircraft -- Environmental conditions and test procedures for airborne equipment
|
95.99 | |
Aircraft -- Environmental conditions and test procedures for airborne equipment
|
90.93 | |
Aircraft -- Ball bearings for control cable pulleys -- Dimensions and loads
|
90.93 | |
Aircraft -- Non-metallic pulleys with ball bearings for control cables -- Dimensions and loads
|
90.93 | |
ISO 8076:1984 [Withdrawn]
Aerospace process -- Anodic treatment of aluminium alloys -- Chromic acid process 40 V DC, undyed coating
|
95.99 | |
ISO 8077:1984 [Withdrawn]
Aerospace process -- Anodic treatment of aluminium alloys -- Chromic acid process 20 V DC, undyed coating
|
95.99 | |
Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 1: Design criteria
|
90.93 | |
Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 2: Dimensions
|
90.93 | |
Aerospace -- Wrought aluminium and aluminium alloys -- Inspection, testing and supply requirements -- Part 1: General requirements
|
90.93 | |
Aerospace -- Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses
|
90.93 | |
Aerospace -- Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses
|
90.93 | |
Aerospace -- Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses
|
90.93 | |
Aerospace -- Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated -- Dimensions and masses
|
90.93 | |
Aerospace -- Eye-ends, in steel, threaded, for aircraft control wire rope -- Dimensions and loads
|
90.93 | |
Aerospace -- Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
|
90.93 | |
Aerospace -- Turnbarrels, for aircraft control wire rope -- Dimensions and loads
|
90.93 | |
Aerospace -- Double-shank ball-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope -- Dimensions and loads
|
90.93 | |
Aerospace -- Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
|
90.93 | |
Aerospace -- Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
|
90.93 | |
Aerospace -- Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels -- Dimensions and loads
|
90.93 | |
Aerospace -- Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope -- Dimensions and loads
|
90.93 | |
Aerospace -- Fork-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope -- Dimensions and loads
|
90.93 | |
Aerospace -- Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope for rolling bearings -- Dimensions and loads
|
90.93 | |
Aerospace -- Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles -- Dimensions
|
90.93 | |
Aerospace -- Aircraft control wire rope assemblies -- Dimensions and end-fitting combinations
|
90.93 | |
Aerospace -- Aircraft control wire rope assemblies -- Technical specification
|
90.93 | |
ISO/TR 10201:1989 [Withdrawn]
Aerospace -- Standards for electronic instruments and systems
|
95.99 | |
ISO/TR 10201:1991 [Withdrawn]
Aerospace -- Standards for electronic instruments and systems
|
95.99 | |
ISO/TR 10201:1996 [Withdrawn]
Aerospace -- Standards for electronic instruments and systems
|
95.99 | |
ISO/TR 10201:2001 [Withdrawn]
Aerospace -- Standards for electronic instruments and systems
|
95.99 | |
Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 1: Metric series
|
90.93 | |
Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 2: Inch series
|
90.93 | |
Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 3: Technical specification
|
90.93 | |
Aerospace -- End-fittings and turnbarrels for aircraft control wire rope -- Technical specification
|
90.93 | |
Aerospace -- Airframe needle roller, cylindrical roller and track roller bearings -- Technical specification
|
90.93 | |
Aerospace -- Airframe needle track roller, yoke type, single-row, sealed -- Inch series
|
90.93 | |
Aerospace -- Airframe needle track roller, yoke type, double-row, sealed -- Inch series
|
90.93 | |
Aerospace -- Airframe needle roller bearings, single-row, shielded -- Inch series
|
90.93 | |
Aerospace -- Airframe needle track roller, stud type, single-row, sealed -- Inch series
|
90.93 | |
Aerospace -- Airframe needle track roller, yoke type, single-row, sealed -- Metric series
|
90.93 | |
Aerospace -- Airframe needle track roller, stud type, single-row, sealed -- Metric series
|
90.93 | |
Aerospace -- Airframe rolling bearings: ball and spherical roller bearings -- Technical specification
|
90.93 | |
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 -- Metric series
|
90.93 | |
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty -- Metric series
|
90.93 | |
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring intermediate duty -- Inch series
|
90.93 | |
Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty -- Inch series
|
90.93 | |
Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty -- Inch series
|
90.93 | |
Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty -- Inch series
|
90.93 | |
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, double-row, self-aligning, diameter series 2 -- Metric series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, rigid, diameter series 0 and 2 -- Metric series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, rigid, diameter series 8 and 9 -- Metric series
|
90.93 | |
Aerospace -- Airframe ball bearings, double-row, rigid, diameter series 0 -- Metric series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, light duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, light duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, intermediate duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra-light duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, double-row, rigid, sealed, heavy duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, double-row, self-aligning, sealed, heavy duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, self-aligning, sealed, heavy duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, self-aligning, sealed, light duty -- Inch series
|
90.93 | |
Aerospace -- Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty -- Inch series
|
90.93 | |
Aircraft and space -- Industrial data -- Product identification and traceability
|
90.92 | |
ISO/CD 21849 [Under development]
Aircraft and space -- Industrial data -- Product identification and traceability
|
30.99 | |
ISO/TS 21849:2003 [Withdrawn]
Aircraft -- Integrated data processing materials management -- Bar coding
|
95.99 |
No matching records found