• Filter:

  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 6/SC 2 Secretariat Stage ICS
ISO 186:1985
Paper and board — Sampling to determine average quality
95.99
ISO 186:1994
Paper and board — Sampling to determine average quality
95.99
ISO 186:2002
Paper and board — Sampling to determine average quality
90.93
ISO 187:1977
Paper and board — Conditioning of samples
95.99
ISO 187:1990
Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
90.93
ISO 287:1985
Paper and board — Determination of moisture content — Oven-drying method
95.99
ISO 287:2009
Paper and board — Determination of moisture content of a lot — Oven-drying method
95.99
ISO 287:2017
Paper and board — Determination of moisture content of a lot — Oven-drying method
60.60
ISO 438:1980
Paper — Determination of bulking thickness and apparent density
95.99
ISO 534:1980
Paper and board — Determination of the thickness of single sheets (and method of calculation of the apparent density of board)
95.99
ISO 534:1988
Paper and board — Determination of thickness and apparent bulk density or apparent sheet density
95.99
ISO 534:2005
Paper and board — Determination of thickness, density and specific volume
95.99
ISO 534:2011
Paper and board — Determination of thickness, density and specific volume
90.93
ISO 535:1976
Paper and board — Determination of water absorption — Cobb method
95.99
ISO 535:1991
Paper and board — Determination of water absorptiveness — Cobb method
95.99
ISO 535:2014
Paper and board — Determination of water absorptiveness — Cobb method
90.93
ISO 536:1976
Paper and board — Determination of grammage
95.99
ISO 536:1995
Paper and board — Determination of grammage
95.99
ISO 536:2012
Paper and board — Determination of grammage
90.92
ISO/DIS 536
Paper and board — Determination of grammage
40.98
ISO/FDIS 536
Paper and board — Determination of grammage
50.20
ISO 1924-1:1983
Paper and board — Determination of tensile properties — Part 1: Constant rate of loading method
95.99
ISO 1924-1:1992
Paper and board — Determination of tensile properties — Part 1: Constant rate of loading method
95.99
ISO 1924-2:1985
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method
95.99
ISO 1924-2:1994
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method
95.99
ISO 1924-2:2008
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)
90.93
ISO 1924-3:2005
Paper and board — Determination of tensile properties — Part 3: Constant rate of elongation method (100 mm/min)
90.20
ISO 1974:1985
Paper — Determination of tearing resistance
95.99
ISO 1974:1990
Paper — Determination of tearing resistance (Elmendorf method)
95.99
ISO 1974:2012
Paper — Determination of tearing resistance — Elmendorf method
90.93
ISO 2144:1983
Paper and board — Determination of ash
95.99
ISO 2144:1987
Paper and board — Determination of ash
95.99
ISO 2493-1:2010
Paper and board — Determination of bending resistance — Part 1: Constant rate of deflection
90.93
ISO 2493-2:2011
Paper and board — Determination of bending resistance — Part 2: Taber-type tester
90.92
ISO 2493:1973
Paper and board — Determination of stiffness — Static bending method
95.99
ISO 2493:1992
Paper and board — Determination of resistance to bending
95.99
ISO/FDIS 2493-2
Paper and board — Determination of resistance to bending — Part 2: Taber-type tester
50.00
ISO 2494:1974
Paper and board — Recommended procedure for the determination of roughness — Constant-pressure air-flow method
95.99
ISO 2528:1974
Sheet materials — Determination of water vapour transmission rate — Dish method
95.99
ISO 2528:1995
Sheet materials — Determination of water vapour transmission rate — Gravimetric (dish) method
95.99
ISO 2528:2017
Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
60.60
ISO 2758:1983
Paper — Determination of bursting strength
95.99
ISO 2758:2001
Paper — Determination of bursting strength
95.99
ISO 2758:2014
Paper — Determination of bursting strength
90.20
ISO 2759:1983
Board — Determination of bursting strength
95.99
ISO 2759:2001
Board — Determination of bursting strength
95.99
ISO 2759:2014
Board — Determination of bursting strength
90.93
ISO 3034:1975
Corrugated fibreboard — Determination of thickness
95.99
ISO 3034:2011
Corrugated fibreboard — Determination of single sheet thickness
90.93
ISO 3035:1982
Single-faced and single-wall corrugated fibreboard — Determination of flat crush resistance
95.99
ISO 3035:2011
Corrugated fibreboard — Determination of flat crush resistance
90.93
ISO 3036:1975
Board — Determination of puncture resistance
90.93
ISO 3037:1982
Corrugated fibreboard — Determination of edgewise crush resistance
95.99
ISO 3037:1994
Corrugated fibreboard — Determination of edgewise crush resistance (Unwaxed edge method)
95.99
ISO 3037:2007
Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
95.99
ISO 3037:2013
Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
90.93
ISO 3038:1975
Corrugated fibreboard — Determination of the water resistance of the glue bond by immersion
90.93
ISO 3039:1975
Corrugated fibreboard — Determination of the grammage of the component papers after separation
95.99
ISO 3039:2010
Corrugated fibreboard — Determination of grammage of the component papers after separation
90.93
ISO 3687:1976
Paper and board — Determination of air resistance (Gurley)
95.99
ISO 3689:1983
Paper and board — Determination of bursting strength after immersion in water
90.93
ISO 3762:1979
Paper — Preparation of a letterpress print for test purposes
95.99
ISO 3781:1983
Paper and board — Determination of tensile strength after immersion in water
95.99
ISO 3781:2011
Paper and board — Determination of tensile strength after immersion in water
90.93
ISO 3782:1980
Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Pendulum or spring model)
95.99
ISO 3783:1980
Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Electric model)
95.99
ISO 3783:2006
Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model)
90.93
ISO 5626:1978
Paper — Determination of folding endurance
95.99
ISO 5626:1993
Paper — Determination of folding endurance
90.93
ISO 5627:1984
Paper and board — Determination of smoothness (Bekk method)
95.99
ISO 5627:1995
Paper and board — Determination of smoothness (Bekk method)
90.93
ISO 5627:1995/Cor 1:2002
Paper and board — Determination of smoothness (Bekk method) — Technical Corrigendum 1
60.60
ISO 5628:1990
Paper and board — Determination of bending stiffness by static methods — General principles
95.99
ISO 5628:2012
Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
95.99
ISO 5628:2019
Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
60.60
ISO 5629:1983
Paper and board — Determination of bending stiffness — Resonance method
95.99
ISO 5629:2017
Paper and board — Determination of bending stiffness — Resonance method
60.60
ISO 5630-1:1982
Paper and board — Accelerated ageing — Part 1: Dry heat treatment
95.99
ISO 5630-1:1991
Paper and board — Accelerated ageing — Part 1: Dry heat treatment at 105 degrees C
90.93
ISO 5630-2:1985
Paper and board — Accelerated ageing — Part 2: Moist heat treatment at 90 degrees C and 25 % relative humidity
95.99
ISO 5630-3:1986
Paper and board — Accelerated ageing — Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity
95.99
ISO 5630-3:1996
Paper and board — Accelerated ageing — Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity
90.93
ISO 5630-4:1986
Paper and board — Accelerated ageing — Part 4: Dry heat treatment at 120 or 150 degrees C
90.93
ISO 5630-5:2008
Paper and board — Accelerated ageing — Part 5: Exposure to elevated temperature at 100 degrees C
90.93
ISO 5630-6:2009
Paper and board — Accelerated ageing — Part 6: Exposure to atmospheric pollution (nitrogen dioxide)
90.20
ISO 5630-7:2014
Paper and board — Accelerated ageing — Part 7: Exposure to light
90.20
ISO 5633:1983
Paper and board — Determination of resistance to water penetration
90.20
ISO 5634:1986
Paper and board — Determination of grease resistance
95.99
ISO 5634:1986/Cor 1:1992
Paper and board — Determination of grease resistance — Technical Corrigendum 1
95.99
ISO 5635:1978
Paper — Measurement of dimensional change after immersion in water
90.93
ISO 5636-1:1984
Paper and board — Determination of air permeance (medium range) — Part 1: General method
95.99
ISO 5636-2:1984
Paper and board — Determination of air permeance (medium range) — Part 2: Schopper method
95.99
ISO 5636-3:1984
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
95.99
ISO 5636-3:1992
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
95.99
ISO 5636-3:2013
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
90.93
ISO 5636-4:1986
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
95.99
ISO 5636-4:2005
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
95.99
ISO 5636-4:2013
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
90.93
ISO 5636-5:1986
Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method
95.99
ISO 5636-5:1986/Cor 1:1990
Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method — Technical Corrigendum 1
95.99
ISO 5636-5:2003
Paper and board — Determination of air permeance and air resistance (medium range) — Part 5: Gurley method
95.99
ISO 5636-5:2013
Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method
90.93
ISO 5636-6:2015
Paper and board — Determination of air permeance (medium range) — Part 6: Oken method
60.60
ISO 5637:1978
Paper and board — Determination of water absorption and increase in thickness after immersion in water
95.99
ISO 5637:1989
Paper and board — Determination of water absorption after immersion in water
90.93
ISO 5638:1978
Solid fibreboard — Determination of grammage of single layers
90.93
ISO 5651:1978
Paper, board and pulps — Units for expressing properties
95.99
ISO 5651:1989
Paper, board and pulps — Units for expressing properties
95.99
ISO 7263-1:2018
Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 1: A-flute
60.60
ISO 7263-2:2018
Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 2: B-flute
60.60
ISO 7263:1985
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
95.99
ISO 7263:1994
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
95.99
ISO 7263:2008
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
95.99
ISO 7263:2011
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
95.99
ISO 8226-1:1985
Paper and board — Measurement of hygroexpansivity — Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %
95.99
ISO 8226-1:1994
Paper and board — Measurement of hygroexpansivity — Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %
90.93
ISO 8226-2:1990
Paper and board — Measurement of hygroexpansivity — Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %
90.93
ISO 8784-1:1987
Paper and board — Determination of microbiological properties — Part 1: Total bacterial count
95.99
ISO 8784-1:2005
Pulp, paper and board — Microbiological examination — Part 1: Total count of bacteria, yeast and mould based on disintegration
95.99
ISO 8784-1:2014
Pulp, paper and board — Microbiological examination — Part 1: Enumeration of bacteria and bacterial spores based on disintegration
90.20
ISO/DIS 8784-3
Pulp, paper and board — Microbiological examination — Part 3: Enumeration of yeast and mould based on disintegration
40.99
ISO/WD 8784-2
Pulp, paper and board — Microbiological examination — Part 2: Enumeration of bacteria, yeast and mould on surface
20.20
ISO 8787:1986
Paper and board — Determination of capillary rise — Klemm method
90.93
ISO 8791-1:1986
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method
90.93
ISO 8791-2:1990
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
95.99
ISO 8791-2:2013
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
90.93
ISO 8791-3:1990
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
95.99
ISO 8791-3:2005
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
95.99
ISO 8791-3:2017
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
60.60
ISO 8791-4:1992
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method
95.99
ISO 8791-4:2007
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method
90.92
ISO/CD 8791-4
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method
30.99
ISO/DIS 8791-5
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 5: Oken method
40.99
ISO 9895:1989
Paper and board — Compressive strength — Short span test
95.99
ISO 9895:2008
Paper and board — Compressive strength — Short-span test
90.93
ISO 9932:1990
Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods
90.93
ISO 11004:1992
Paper and board — Determination of air permeance — Low range
95.99
ISO 11556:1998
Paper and board — Determination of curl using a single vertically suspended test piece
95.99
ISO 11556:1998/Cor 1:2003
Paper and board — Determination of curl using a single vertically suspended test piece — Technical Corrigendum 1
95.99
ISO 11556:2005
Paper and board — Determination of curl using a single vertically suspended test piece
90.93
ISO 11605:1995
Paper and board — Calibration of variable-area flowmeters
95.99
ISO 12192:2002
Paper and board — Compressive strength — Ring crush method
95.99
ISO 12192:2011
Paper and board — Determination of compressive strength — Ring crush method
90.93
ISO 12625-11:2012
Tissue paper and tissue products — Part 11: Determination of wet ball burst strength
95.99
ISO 12625-11:2019
Tissue paper and tissue products — Part 11: Determination of wet ball burst strength
60.60
ISO 12625-12:2010
Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency
90.93
ISO 12625-15:2015
Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant
60.60
ISO 12625-16:2015
Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method
60.60
ISO 12625-1:2005
Tissue paper and tissue products — Part 1: General guidance on terms
95.99
ISO 12625-1:2011
Tissue paper and tissue products — Part 1: General guidance on terms
95.99
ISO 12625-1:2019
Tissue paper and tissue products — Part 1: Vocabulary
60.60
ISO 12625-3:2005
Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density
95.99
ISO 12625-3:2014
Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
90.93
ISO 12625-4:2005
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at break and tensile energy absorption
95.99
ISO 12625-4:2016
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
60.60
ISO 12625-5:2005
Tissue paper and tissue products — Part 5: Determination of wet tensile strength
95.99
ISO 12625-5:2016
Tissue paper and tissue products — Part 5: Determination of wet tensile strength
60.60
ISO 12625-6:2005
Tissue paper and tissue products — Part 6: Determination of grammage
95.99
ISO 12625-6:2016
Tissue paper and tissue products — Part 6: Determination of grammage
60.60
ISO 12625-7:2007
Tissue paper and tissue products — Part 7: Determination of optical properties
95.99
ISO 12625-7:2014
Tissue paper and tissue products — Part 7: Determination of optical properties — Measurement of brightness and colour with D65/10° (outdoor daylight)
90.93
ISO 12625-8:2006
Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method
95.99
ISO 12625-8:2010
Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
90.93
ISO 12625-9:2005
Tissue paper and tissue products — Part 9: Determination of ball burst strength
95.99
ISO 12625-9:2015
Tissue paper and tissue products — Part 9: Determination of ball burst strength
60.60
ISO/AWI 12625-19
Tissue paper and tissue products — Part 19: Determination of surface friction
20.00
ISO/CD 12625-17
Tissue paper and tissue products — Part 17: Determination of disintegration in water
30.99
ISO 13820:1996
Paper, board and corrugated fibreboard — Description and calibration of compression-testing equipment
95.99
ISO 13820:2014
Paper, board and corrugated fibreboard — Description and calibration of compression-testing equipment
90.93
ISO 13821:2002
Corrugated fibreboard — Determination of edgewise crush resistance — Waxed edge method
90.93
ISO/CD 14778
Paper and board — Measurement of water contact angle by optical methods
30.00
ISO 14968:1999
Paper and board — Cut-size office paper — Measurement of curl in a pack of sheets
90.93
ISO 15359:1999
Paper and board — Determination of the static and kinetic coefficients of friction — Horizontal plane method
90.93
ISO 15754:2009
Paper and board — Determination of z-directional tensile strength
90.20
ISO 15755:1999
Paper and board — Estimation of contraries
90.93
ISO 16260:2016
Paper and board — Determination of internal bond strength
60.60
ISO 16532-1:2008
Paper and board — Determination of grease resistance — Part 1: Permeability test
90.93
ISO 16532-2:2007
Paper and board — Determination of grease resistance — Part 2: Surface repellency test
90.93
ISO 16532-3:2010
Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers
90.93
ISO 16945:2014
Corrugating medium — Determination of the edge crush resistance after laboratory fluting
90.93
ISO/TS 17958:2013
Paper and board — Determination of fracture toughness — Constant rate of elongation method (1,7 mm/s)
90.20
ISO/AWI 19857
Paper and board — Laboratory test for ink setting on paper using printability testers
20.00
ISO 20494:2017
Paper — Requirements for stability for general graphic applications
60.60
ISO 22414:2004
Paper — Cut-size office paper — Measurement of edge quality
90.93
ISO/AWI 23885
Determination of the coating strength in the fold
20.00

No matching records found. Please try changing the filter settings.