ISO 5474-2:2024

Вы можете ознакомиться с данным стандартом в нашей онлайн-библиотеке (OBP)

недоступно на русском языке

Опубликовано (Версия 1, 2024)

Последний раз этот публикация был пересмотрен в 2024. Поэтому данная версия остается актуальной.

ISO 5474-2:2024

CHF 159

Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document in combination with ISO 5474-1 specifies requirements for conductive power transfer using alternating current (AC) with a voltage up to 1 000 V a.c. between electrically-propelled road vehicles and external electric circuits.

NOTE External electric circuits are not part of the vehicle.

This document provides requirements for conductive charging in modes 2, 3 according to IEC 61851-1 and reverse power transfer.

This document applies to vehicle power supply circuits. Examples of circuit diagrams for different configurations of chargers on-board electric vehicles are shown in Annex A.

This document also provides requirements for reverse power transfer through on-board standard socket-outlets and/or a EV plug or vehicle inlet according to IEC 62196-1 or IEC 62196-2 conductively connected to the vehicle power supply circuit. Requirements for AC power transfer using a charger without at least simple separation are under consideration.

This document does not provide:

— requirements for simultaneous operation of multiple EV plugs or vehicle inlets and

— requirements for power transfer while driving (electric road systems)

but they are under consideration.

This document does not provide:

— requirements for mopeds and motorcycles (which are specified in ISO 18246);

— comprehensive safety information for manufacturing, maintenance and repair personnel;

— requirements for vehicle to load adapters.

Общая информация

Текущий статус
: Опубликовано

Дата публикации
: 2024-06

Этап
: Подтверждение действия международного стандарта [90.93]
Версия
: 1
Технический комитет :
ISO/TC 22/SC 37

ICS :
43.120
RSS обновления