Тезис Предпросмотр

ISO 9587:2007 establishes stress-relief requirements for high strength steels, in order to reduce their susceptibility or degree of susceptibility to hydrogen embrittlement in subsequent pretreatment, electroplating, autocatalytic plating, chemical conversion and phosphating processes. This International Standard is applicable to steels of which the properties are not adversely affected by heat treatment at 190 0C to 230 0C or higher (see 6.2).

The heat treatment procedures established in ISO 9587:2007 have been shown to be effective in reducing the susceptibility of steel having tensile strengths equal to or greater than 1 000 MPa and that have been machined, ground, cold-formed or cold-straightened subsequent to heat treatment. This heat treatment procedure is used prior to any operation capable of hydrogen charging the parts, such as the cleaning procedures prior to electroplating, autocatalytic plating and other chemical coating operations.

ISO 9587:2007 does not apply to fasteners.


Общая информация

  • Текущий статус :  Published
    Дата публикации : 2007-11
  • Версия : 2
    Число страниц : 3
  • :
    ISO/TC 107/SC 3
    Electrodeposited coatings and related finishes
  • 25.220.20
    Surface treatment
    25.220.40
    Metallic coatings

Приобрести данный стандарт

Формат Язык
PDF
Бумажный
  • CHF38

Жизненны цикл

Стандарт, который пересматривается каждые 5 лет



Изменения / Исправления

  • Ранее
    ISO 9587:1999
  • Не подтверждено
    ISO 9587:2007

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)

Будьте в курсе актуальных новостей ИСО

Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах