Тезис Предпросмотр
This part of ISO 5855 specifies the general requirements for MJ threads used in aerospace construction.
It determines the basic triangular profile for this type of thread and gives a system for designating the diameter and
pitch combinations. For all diameters 1,6 mm to 300 mm, it offers in the form of tables the basic dimensions and
tolerances for a selection of diameter and pitch combinations. It also provides the method of calculation for the
dimensions and tolerances for any diameter and pitch combination not given in the tables, including threads with a
diameter in excess of 300 mm.
For limit dimensions for bolts and nuts of nominal diameter 1,6 mm to 39 mm, see ISO 5855-2. For limit dimensions for
fittings for fluid systems, see ISO 5855-3.
Общая информация
-
Текущий статус : PublishedДата публикации : 1999-10
-
Версия : 3
-
- ICS :
-
Screw threads
Приобрести данный стандарт
Формат | Язык | |
---|---|---|
Бумажный |
- CHF158
Жизненный цикл
Стандарт, который пересматривается каждые 5 лет
Изменения / Исправления
-
Ранее
ISO 5855-1:1988
-
Сейчас на стадии пересмотра
ISO 5855-1:1999
Появились вопросы?
Ознакомьтесь с FAQ
Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)
Будьте в курсе актуальных новостей ИСО
Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах.