недоступно на русском языке

Тезис Предпросмотр

This International Standard specifies equipment and a method for using nitric acid vapour to determine porosity in

gold coatings, particularly electrodeposits and clad metals used on electrical contacts.

This method is designed to show whether the porosity level is less than or greater than some value that, by

experience, is considered by the user to be acceptable for the intended application.

It is suitable for inlays or claddings containing 75 % or more of gold, for electrodeposits containing 95 % or more of

gold or for substrates of copper, nickel and their alloys that are commonly used in electrical contacts.

The nitric acid vapour test is too severe to be used for gold coatings less than 0,6 _m thick. It is also not suitable for

coatings that are less noble than gold or platinum, such as palladium and its alloys, or gold-flashed palladium and

its alloys.

Several other porosity testing methods are described in ISO 10308 and in the literature (see e.g. Bibliography, [1]

and [2]).


Общая информация

  • Текущий статус :  Published
    Дата публикации : 2000-03
  • Версия : 1
  • :
    ISO/TC 107/SC 7
    Corrosion tests
  • 25.220.40
    Metallic coatings

Приобрести данный стандарт

Формат Язык
PDF
Бумажный
  • CHF58

Жизненный цикл


Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)

Будьте в курсе актуальных новостей ИСО

Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах.