• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 138/SC 5 Секретариата Этап ICS
ISO 580:1990
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings — Oven test — Test method and basic specifications
95.99
ISO 580:2005
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
90.93
ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
90.93
ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
90.20
ISO 1167-3:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components
90.93
ISO 1167-4:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies
90.93
ISO 1167:1996
Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method
95.99
ISO 1167:1996/Cor 1:1997
Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method — Technical Corrigendum 1
95.99
ISO 2035:1974
Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Pressure-resistance test
95.99
ISO 2044:1974
Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe — Hydraulic internal pressure test
95.99
ISO 2505-1:1994
Thermoplastics pipes — Longitudinal reversion — Part 1: Determination methods
95.99
ISO 2505-2:1994
Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters
95.99
ISO 2505-2:1994/Cor 1:1997
Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters — Technical Corrigendum 1
95.99
ISO 2505:1981
Unplasticized polyvinyl chloride (PVC) pipes — Longitudinal reversion — Test methods and specification
95.99
ISO 2505:2005
Thermoplastics pipes — Longitudinal reversion — Test method and parameters
90.93
ISO 2506:1981
Polyethylene pipes (PE) — Longitudinal reversion — Test methods and specification
95.99
ISO 2507-1:1995
Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
90.93
ISO 2507-2:1995
Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
90.93
ISO 2507-3:1995
Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
90.93
ISO 2507:1982
Unplasticized polyvinyl chloride (PVC) pipes and fittings — Vicat softening temperature — Test method and specification
95.99
ISO 2508:1981
Unplasticized polyvinyl chloride (PVC) pipes — Water absorption — Determination and specification
95.99
ISO 3114:1977
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method
90.93
ISO 3126:1974
Plastics pipes — Measurement of dimensions
95.99
ISO 3126:2005
Plastics piping systems — Plastics components — Determination of dimensions
90.93
ISO 3127:1994
Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
90.93
ISO 3212:1975
Polypropylene pipes — Burst test requirements
95.99
ISO 3213:1996
Polypropylene (PP) pipes — Effect of time and temperature on expected strength
95.99
ISO 3213:2009
Polypropylene (PP) pipes — Effect of time and temperature on the expected strength
90.93
ISO 3458:2015
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
60.60
ISO 3459:2015
Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
60.60
ISO 3472:1975
Unplasticized polyvinyl chloride (PVC) pipes — Specification and determination of resistance to acetone
95.99
ISO 3473:1977
Unplasticized polyvinyl chloride (PVC) pipes — Effect of sulphuric acid — Requirement and test method
95.99
ISO 3474:1976
Unplasticized polyvinyl chloride (PVC) pipes — Specification and measurement of opacity
95.99
ISO 3477:1981
Polypropylene (PP) pipes and fittings — Density — Determination and specification
95.99
ISO 3480:1976
Polypropylene (PP) pipes — Maximum permissible longitudinal reversion
95.99
ISO 3501:2015
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
60.60
ISO 3503:2015
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending
60.60
ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings — Specification and determination of density
90.93
ISO 4059:1978
Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and requirements
90.20
ISO 4439:1979
Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of density
90.93
ISO 4440-1:1994
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 1: Test method
95.99
ISO 4440-2:1994
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 2: Test conditions
95.99
ISO 4451:1980
Polyethylene (PE) pipes and fittings — Determination of reference density of uncoloured and black polyethylenes
95.99
ISO 6259-1:1997
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
95.99
ISO 6259-1:2015
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
60.60
ISO 6259-2:1997
Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
90.92
ISO 6259-3:1997
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
95.99
ISO 6259-3:2015
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
60.60
ISO/DIS 6259-2
Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
40.20
ISO 6964:1986
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification
95.99
ISO 6964:2019
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
60.60
ISO 6992:1986
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply — Extractability of cadmium and mercury occurring as impurities
95.99
ISO 7245:1984
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) — General specification for moulding and extrusion materials
90.93
ISO 7246:1984
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) — General specification for moulding and extrusion materials
90.93
ISO 7387-1:1983
Adhesives with solvents for assembly of PVC-U pipe elements — Characterization — Part 1: Basic test methods
90.93
ISO 7676:1990
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane test
95.99
ISO 7686:1992
Plastics pipes and fittings — Opacity — Test method
95.99
ISO 7686:2005
Plastics pipes and fittings — Determination of opacity
90.93
ISO 8361-1:1991
Thermoplastics pipes and fittings — Water absorption — Part 1: General test method
90.93
ISO 8361-2:1991
Thermoplastics pipes and fittings — Water absorption — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
90.93
ISO 8361-3:1991
Thermoplastics pipes and fittings — Water absorption — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
90.93
ISO 8795:1990
Plastics pipes for the transport of water intended for human consumption — Extractability of constituents — Test method
95.99
ISO 8795:1998
Plastics piping systems for the conveyance of water intended for human consumption — Migration assessment — Determination of migration values for plastics pipes
95.99
ISO 8795:2001
Plastics piping systems for the transport of water intended for human consumption — Migration assessment — Determination of migration values of plastics pipes and fittings and their joints
90.93
ISO 9080:2003
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
95.99
ISO 9080:2012
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
90.93
ISO/TR 9080:1992
Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
95.99
ISO/TR 9080:1992/Cor 1:1995
Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials — Technical Corrigendum 1
95.99
ISO 9311-1:2005
Adhesives for thermoplastic piping systems — Part 1: Determination of film properties
90.93
ISO 9311-2:2002
Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength
95.99
ISO 9311-2:2011
Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength
90.93
ISO 9311-3:2005
Adhesives for thermoplastic piping systems — Part 3: Test method for the determination of resistance to internal pressure
90.93
ISO 9356:1989
Polyolefin pipe assemblies with or without jointed fittings — Resistance to internal pressure — Test method
95.99
ISO 9852:1995
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
95.99
ISO 9852:2007
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
90.93
ISO 9853:1991
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems — Crushing test
90.93
ISO 9854-1:1994
Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 1: General test method
90.92
ISO 9854-2:1994
Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 2: Test conditions for pipes of various materials
90.92
ISO 9967:1994
Thermoplastics pipes — Determination of creep ratio
95.99
ISO 9967:2007
Thermoplastics pipes — Determination of creep ratio
95.99
ISO 9967:2016
Thermoplastics pipes — Determination of creep ratio
60.60
ISO 9969:1994
Thermoplastics pipes — Determination of ring stiffness
95.99
ISO 9969:2007
Thermoplastics pipes — Determination of ring stiffness
95.99
ISO 9969:2016
Thermoplastics pipes — Determination of ring stiffness
60.60
ISO 10146:1997
Crosslinked polyethylene (PE-X) pipes — Effect of time and temperature on the expected strength
95.99
ISO 10146:2019
Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
60.60
ISO 10147:1994
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
95.99
ISO 10147:2004
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
95.99
ISO 10147:2004/Amd 1:2008
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content — Amendment 1
95.99
ISO 10147:2011
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
90.93
ISO 11173:1994
Thermoplastics pipes — Determination of resistance to external blows — Staircase method
90.93
ISO 11413:1996
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
95.99
ISO 11413:2008
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
95.99
ISO 11413:2019
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
60.60
ISO 11414:1996
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
95.99
ISO 11414:2009
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
90.93
ISO 11420:1996
Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds
95.99
ISO/TR 11647:1996
Fusion compatibility of polyethylene (PE) pipes and fittings
95.99
ISO 11673:2005
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes — Determination of the fracture toughness properties
90.93
ISO 12091:1995
Structured-wall thermoplastics pipes — Oven test
90.93
ISO 12092:2000
Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure — Resistance to internal pressure — Test method
95.99
ISO 12162:1995
Thermoplastics materials for pipes and fittings for pressure applications — Classification and designation — Overall service (design) coefficient
95.99
ISO 12162:2009
Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
90.93
ISO 12230:1996
Polybutene (PB) pipes — Effect of time and temperature on the expected strength
95.99
ISO 12230:2012
Polybutene-1 (PB-1) pipes — Effect of time and temperature on the expected strength
90.93
ISO 13056:2011
Plastics piping systems — Pressure systems for hot and cold water — Test method for leaktightness under vacuum
90.93
ISO 13477:1997
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
95.99
ISO 13477:2008
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
90.93
ISO 13478:1997
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
95.99
ISO 13478:2007
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
90.93
ISO 13479:1997
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes (notch test)
95.99
ISO 13479:2009
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
90.92
ISO/CD 13479
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
30.99
ISO 13480:1997
Polyethylene pipes — Resistance to slow crack growth — Cone test method
90.93
ISO 13760:1998
Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage
90.93
ISO 13761:1996
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
95.99
ISO 13761:2017
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
60.60
ISO 13844:2015
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
60.60
ISO 13845:2015
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection
60.60
ISO 13924:2000
Plastics pipes and fittings — Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
90.93
ISO 13949:1997
Method for the assessment of the degree of pigment dispersion in polyolefin pipes, fittings and compounds
95.99
ISO 13951:2001
Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading
95.99
ISO 13951:2015
Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
60.60
ISO 13953:2001
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
90.93
ISO 13953:2001/DAmd 1
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint — Amendment 1
40.99
ISO 13954:1997
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
90.93
ISO 13954:1997/DAmd 1
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm — Amendment 1: Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
40.99
ISO 13955:1997
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies
90.93
ISO 13955:1997/DAmd 1
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies — Amendment 1: Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies
40.99
ISO 13956:2010
Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
90.93
ISO 13957:1997
Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance
90.93
ISO 13967:1998
Thermoplastics fittings — Determination of ring stiffness
95.99
ISO 13967:2009
Thermoplastics fittings — Determination of ring stiffness
90.93
ISO 13968:1997
Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
95.99
ISO 13968:2008
Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
90.93
ISO 15853:1999
Thermoplastics materials — Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
90.93
ISO 15908:2002
Adhesives for thermoplastic piping systems — Test method for the determination of thermal stability of adhesives
90.93
ISO 16241:2005
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
90.93
ISO/TS 16479:2012
Thermoplastics pipes for the conveyance of fluids — Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
90.93
ISO 16871:2003
Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
90.93
ISO/TR 16913:1999
Plastics pipes and fittings — Definitions of types of test
90.93
ISO/TS 16943
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing
60.00
ISO 17454:2006
Plastics piping systems — Multilayer pipes — Test method for the adhesion of the different layers using a pulling rig
90.93
ISO 17455:2005
Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe
90.93
ISO 17455:2005/Cor 1:2007
Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe — Technical Corrigendum 1
60.60
ISO 17456:2006
Plastics piping systems — Multilayer pipes — Determination of long-term strength
90.93
ISO 17778:2015
Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships
90.92
ISO/TR 18124:2006
Plastics piping systems — Multilayer M (metal) pipes — Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
90.93
ISO 18373-1:2007
Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 1: Measurement of the processing temperature
90.93
ISO 18373-2:2008
Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 2: Measurement of the enthalpy of fusion of crystallites
90.93
ISO 18488:2015
Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
60.60
ISO 18489:2015
Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
60.60
ISO 18553:2002
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
90.92
ISO 18553:2002/Amd 1:2007
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds — Amendment 1
60.60
ISO 19892:2011
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling
90.93
ISO 19893:2011
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of mounted assemblies to temperature cycling
90.93
ISO 19899:2010
Plastics piping systems — Polyolefin pipes and mechanical fitting assemblies — Test method for the resistance to end load (AREL test)
90.93
ISO/TS 19911:2010
Plastics pipes and fittings — Format of a technical file for characterizing PE spigot end fittings
90.93
ISO 21751:2011
Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test
90.93
ISO/TS 22499:2019
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing
60.60
ISO 23228:2011
Thermoplastics pipes for the conveyance of fluids — Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
90.93
ISO 24033:2006
Pipes made of raised-temperature-resistance polyethylene (PE-RT) — Effect of time and temperature on the expected strength
95.99
ISO 24033:2009
Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength
90.20
ISO/WD TS 24399
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using time of flight diffraction testing
20.00
ISO/TS 26873:2010
Plastics pipes and fittings — Definition and construction procedures for reference lines
90.93

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.