• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 138/SC 2 Секретариата Этап ICS
ISO 264:1976
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series
95.99
ISO 264:1976/Add 1:1982
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series — Addendum 1: Diameters 200 mm and 225 mm
95.99
ISO 727-1:2002
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 1: Metric series
90.93
ISO 727-2:2002
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 2: Inch-based series
95.99
ISO 727-2:2005
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 2: Inch-based series
90.93
ISO 727:1985
Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Dimensions of sockets — Metric series
95.99
ISO 1452-1:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General
90.93
ISO 1452-2:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes
90.93
ISO 1452-3:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings
90.93
ISO 1452-4:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves
90.93
ISO 1452-5:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system
90.93
ISO 2045:1988
Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement
95.99
ISO 2048:1990
Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement
95.99
ISO 2536:1974
Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series — Dimensions of flanges
95.99
ISO 3458:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure
95.99
ISO 3459:1976
Polyethylene (PE) pressure pipes — Joints assembled with mechanical fittings — Internal under-pressure test method and requirement
95.99
ISO 3460:1975
Unplasticized polyvinyl chloride (PVC) pressures pipes — Metric series — Dimensions of adapter for backing flange
95.99
ISO 3501:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of resistance to pull out
95.99
ISO 3503:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure when subjected to bending
95.99
ISO 3603:1977
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness
90.93
ISO 3604:1976
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness under conditions of external hydraulic pressure
95.99
ISO 3663:1976
Polyethylene (PE) pressure pipes and fittings, metric series — Dimensions of flanges
95.99
ISO 4132:1979
Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure — Laying lengths and size of threads — Metric series
90.93
ISO/TR 4191:1989
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply — Recommended practice for laying
95.99
ISO/TR 4191:2014
Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation
60.60
ISO 4422-1:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 1: General
95.99
ISO 4422-2:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 2: Pipes (with or without integral sockets)
95.99
ISO 4422-3:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 3: Fittings and joints
95.99
ISO 4422-4:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 4: Valves and ancillary equipment
95.99
ISO 4422-5:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 5: Fitness for purpose of the system
95.99
ISO 4422:1990
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications
95.99
ISO 4422:1990/Amd 1:1992
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Amendment 1
95.99
ISO 4427-1:2007
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
95.99
ISO 4427-1:2007/Amd 1:2015
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
95.99
ISO 4427-1:2007/Cor 1:2008
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Technical Corrigendum 1
95.99
ISO 4427-1:2019
Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
60.60
ISO 4427-2:2007
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes
95.99
ISO 4427-2:2007/Amd 1:2014
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes — Amendment 1
95.99
ISO 4427-2:2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
60.60
ISO 4427-3:2007
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings
95.99
ISO 4427-3:2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
60.60
ISO 4427-5:2007
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system
95.99
ISO 4427-5:2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
60.60
ISO 4427:1996
Polyethylene (PE) pipes for water supply — Specifications
95.99
ISO 4434:1977
Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure — Laying length and size of threads — Metric series
95.99
ISO 6455:1983
Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure — Dimensions of laying lengths — Metric series
95.99
ISO 7279:1984
Polypropylene (PP) fittings for pipes under pressure — Sockets for fusion using heated tools — Metric series — Dimensions of sockets
95.99
ISO 8779:1992
Polyethylene (PE) pipes for irrigation laterals — Specifications
95.99
ISO 8779:2001
Polyethylene (PE) pipes for irrigation laterals — Specifications
95.99
ISO 8779:2010
Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications
90.92
ISO 8779:2010/Amd 1:2014
Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications — Amendment 1
60.60
ISO/FDIS 8779
Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications
50.92
ISO 8796:1989
Polyethylene (PE) 25 pipes for irrigation laterals — Susceptibility to environmental stress-cracking induced by insert-type fittings — Test method and specification
95.99
ISO 8796:2004
Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements
90.93
ISO 9623:1997
PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure — Design lengths and size of threads — Metric series
90.93
ISO 9624:1997
Thermoplastics pipes for fluids under pressure — Mating dimensions of flange adapters and loose backing flanges
95.99
ISO 9624:2019
Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions
60.60
ISO 9625:1993
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
95.99
ISO/TR 10501:1993
Thermoplastics pipes for the transport of liquids under pressure — Calculation of head losses
90.93
ISO 10508:1995
Thermoplastics pipes and fittings for hot and cold water systems
95.99
ISO 10508:2006
Plastics piping systems for hot and cold water installations — Guidance for classification and design
90.93
ISO 10508:2006/Amd 1:2018
Plastics piping systems for hot and cold water installations — Guidance for classification and design — Amendment 1
60.60
ISO 13783:1997
Plastics piping systems — Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints — Test method for leaktightness and strength while subjected to bending and internal pressure
90.93
ISO 13844:2000
Plastics piping systems — Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes — Test method for leaktightness under negative pressure
95.99
ISO 13845:2000
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes — Test method for leaktightness under internal pressure and with angular deflection
95.99
ISO 13846:2000
Plastics piping systems — End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping — Test method for long-term leaktightness under internal water pressure
90.93
ISO 14236:2000
Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
95.99
ISO 15874-1:2003
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
95.99
ISO 15874-1:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General — Amendment 1
95.99
ISO 15874-1:2013
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
90.93
ISO 15874-2:2003
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
95.99
ISO 15874-2:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1
95.99
ISO 15874-2:2013
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
90.93
ISO 15874-2:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1
60.60
ISO 15874-3:2003
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
95.99
ISO 15874-3:2013
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
90.93
ISO 15874-3:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 1
60.60
ISO 15874-5:2003
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
95.99
ISO 15874-5:2013
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
90.93
ISO 15874-5:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system — Amendment 1
60.60
ISO/TS 15874-7:2003
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity
95.99
ISO/TS 15874-7:2018
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity
60.60
ISO 15875-1:2003
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General
90.93
ISO 15875-1:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General — Amendment 1
60.60
ISO 15875-2:2003
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
90.93
ISO 15875-2:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 1
60.60
ISO 15875-2:2003/CD Amd 2
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 2
30.99
ISO 15875-3:2003
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
90.93
ISO 15875-3:2003/CD Amd 1
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 1
30.99
ISO 15875-5:2003
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
90.93
ISO 15875-5:2003/CD Amd 1
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Amendment 1
30.99
ISO 15875-5:2003/Cor 1:2007
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Technical Corrigendum 1
60.60
ISO/TS 15875-7:2003
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity
95.99
ISO/TS 15875-7:2018
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity
60.60
ISO 15876-1:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General
95.99
ISO 15876-1:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General — Amendment 1
95.99
ISO 15876-1:2017
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General
60.60
ISO 15876-2:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes
95.99
ISO 15876-2:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes — Amendment 1
95.99
ISO 15876-2:2017
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes
60.60
ISO 15876-2:2017/CD Amd 1
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes — Amendment 1
30.99
ISO 15876-3:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 3: Fittings
95.99
ISO 15876-3:2017
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings
60.60
ISO 15876-3:2017/CD Amd 1
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 1
30.99
ISO 15876-5:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 5: Fitness for purpose of the system
95.99
ISO 15876-5:2017
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system
60.60
ISO 15876-5:2017/CD Amd 1
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system — Amendment 1
30.99
ISO/TS 15876-7:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 7: Guidance for the assessment of conformity
95.99
ISO/TS 15876-7:2018
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 7: Guidance for the assessment of conformity
60.60
ISO 15877-1:2003
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General
95.99
ISO 15877-1:2009
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General
90.93
ISO 15877-1:2009/Amd 1:2010
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General — Amendment 1
60.60
ISO 15877-2:2003
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes
95.99
ISO 15877-2:2009
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes
90.93
ISO 15877-2:2009/Amd 1:2010
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 1
60.60
ISO 15877-2:2009/CD Amd 2
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 2
30.99
ISO 15877-3:2003
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings
95.99
ISO 15877-3:2009
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings
90.93
ISO 15877-3:2009/Amd 1:2010
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 1
60.60
ISO 15877-3:2009/CD Amd 2
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 2
30.99
ISO 15877-5:2003
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system
95.99
ISO 15877-5:2009
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system
90.93
ISO 15877-5:2009/Amd 1:2010
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 1
60.60
ISO 15877-5:2009/CD Amd 2
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 2
30.99
ISO/TS 15877-7:2003
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
95.99
ISO/TS 15877-7:2009
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
95.99
ISO/TS 15877-7:2018
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
60.60
ISO 16422:2006
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
95.99
ISO 16422:2014
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
90.60
ISO 21003-1:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
90.93
ISO 21003-2:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes
90.93
ISO 21003-2:2008/Amd 1:2011
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes — Amendment 1
60.60
ISO 21003-3:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings
90.93
ISO 21003-5:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system
90.93
ISO/TS 21003-7:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
95.99
ISO/TS 21003-7:2008/Amd 1:2010
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity — Amendment 1
95.99
ISO/TS 21003-7:2019
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
60.60
ISO 21004:2006
Plastics piping systems — Multilayer pipes and their joints, based on thermoplastics, for water supply
90.93
ISO 22391-1:2007
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General
95.99
ISO 22391-1:2009
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General
90.93
ISO 22391-2:2007
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
95.99
ISO 22391-2:2009
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
90.93
ISO 22391-2:2009/CD Amd 1
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes — Amendment 1
30.99
ISO 22391-3:2007
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
95.99
ISO 22391-3:2009
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
90.93
ISO 22391-3:2009/CD Amd 1
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 1
30.99
ISO 22391-5:2007
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system
95.99
ISO 22391-5:2009
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system
90.93
ISO 22391-5:2009/CD Amd 1
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system — Amendment 1
30.99
ISO/TS 22391-7:2011
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
95.99
ISO/TS 22391-7:2018
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
60.60
ISO/TR 27165:2012
Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
90.93

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.