• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 61/SC 5 Секретариата Этап ICS
ISO/TTA 4:2002
Measurement of thermal conductivity of thin films on silicon substrates
95.99
ISO 171:1980
Plastics — Determination of bulk factor of moulding materials
90.93
ISO 489:1999
Plastics — Determination of refractive index
90.93
ISO 1133-1:2011
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
90.93
ISO 1133-2:2011
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 2: Method for materials sensitive to time-temperature history and/or moisture
90.93
ISO 1133:1991
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
95.99
ISO 1133:1997
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
95.99
ISO 1133:2005
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
95.99
ISO 1133:2005/Cor 1:2006
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics — Technical Corrigendum 1
95.99
ISO 1183-1:2004
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
95.99
ISO 1183-1:2012
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
95.99
ISO 1183-1:2019
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
60.60
ISO 1183-2:2004
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
95.99
ISO 1183-2:2019
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
60.60
ISO 1183-3:1999
Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method
90.93
ISO 1183:1987
Plastics — Methods for determining the density and relative density of non-cellular plastics
95.99
ISO 1218:1975
Plastics — Polyamides — Determination of "melting point"
95.99
ISO 1325:1973
Plastics — Determination of electrical properties of thin sheet and film
95.99
ISO 1628-1:1998
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
95.99
ISO 1628-1:2009
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
90.92
ISO 1628-1:2009/Amd 1:2012
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles — Amendment 1
60.60
ISO/CD 1628-1
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
30.99
ISO 1675:1985
Plastics — Liquid resins — Determination of density by the pyknometer method
90.93
ISO 2555:1989
Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity by the Brookfield Test method
95.99
ISO 2555:2018
Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity using a single cylinder type rotational viscometer method
60.60
ISO 2556:1974
Plastics — Determination of the gas transmission rate of films and thin sheets under atmospheric pressure — Manometric method
90.93
ISO 2561:1974
Plastics — Determination of residual styrene monomer in polystyrene by gas chromatography
95.99
ISO 3146:1985
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers
95.99
ISO 3146:2000
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
90.93
ISO 3146:2000/Cor 1:2002
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods — Technical Corrigendum 1
60.60
ISO 3451-1:1981
Plastics — Determination of ash — Part 1: General methods
95.99
ISO 3451-1:1997
Plastics — Determination of ash — Part 1: General methods
95.99
ISO 3451-1:2008
Plastics — Determination of ash — Part 1: General methods
95.99
ISO 3451-1:2019
Plastics — Determination of ash — Part 1: General methods
60.60
ISO 3451-2:1984
Plastics — Determination of ash — Part 2: Polyalkylene terephthalates
95.99
ISO 3451-2:1998
Plastics — Determination of ash — Part 2: Poly(alkylene terephthalate) materials
90.93
ISO 3451-3:1984
Plastics — Determination of ash — Part 3: Unplasticized cellulose acetate
90.93
ISO 3451-4:1986
Plastics — Determination of ash — Part 4: Polyamides
95.99
ISO 3451-4:1998
Plastics — Determination of ash — Part 4: Polyamides
90.93
ISO 3451-5:1989
Plastics — Determination of ash — Part 5: Poly(vinyl chloride)
95.99
ISO 3451-5:2002
Plastics — Determination of ash — Part 5: Poly(vinyl chloride)
90.93
ISO 3915:1981
Plastics — Measurement of resistivity of conductive plastics
90.93
ISO 4581:1987
Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
95.99
ISO 4581:1994
Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
90.93
ISO 6401:1985
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of residual vinyl chloride monomer — Gas chromatographic method
95.99
ISO 6401:2008
Plastics — Poly(vinyl chloride) — Determination of residual vinyl chloride monomer — Gas-chromatographic method
90.93
ISO 6427:1982
Plastics — Determination of matter extractable by organic solvents (conventional methods)
95.99
ISO 6427:1992
Plastics — Determination of matter extractable by organic solvents (conventional methods)
95.99
ISO 6427:2013
Plastics — Determination of matter extractable by organic solvents (conventional methods)
90.93
ISO 6721-10:2015
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
90.93
ISO 6721-11:2012
Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature
95.99
ISO 6721-11:2019
Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature
60.60
ISO 6721-1:2011
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
95.99
ISO 6721-1:2019
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
60.60
ISO 6721-2:2008
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
95.99
ISO 6721-2:2019
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
60.60
ISO 6721-3:1994
Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method
90.92
ISO 6721-4:2008
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
95.99
ISO 6721-4:2019
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
60.60
ISO 6721-5:1996
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
95.99
ISO 6721-5:2019
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
60.60
ISO 6721-6:1996
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
95.99
ISO 6721-6:2019
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
60.60
ISO 6721-7:1996
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method
95.99
ISO 6721-7:2019
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method
60.60
ISO 6721-8:1997
Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method
95.99
ISO 6721-8:2019
Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method
60.60
ISO 6721-9:1997
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method
95.99
ISO 6721-9:2019
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method
60.60
ISO/CD 6721-3
Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method
30.99
ISO 7059:1982
Caprolactam for industrial use — Determination of absorbance at a wavelength of 290 nm
90.93
ISO 7060:1982
Caprolactam for industrial use — Determination of crystallizing point
95.99
ISO 7111:1987
Plastics — Thermogravimetry of polymers — Temperature scanning method
95.99
ISO 8112:1984
Caprolactam for industrial use — Determination of colour of 50 % aqueous caprolactam solution, expressed in Hazen units (platinum-cobalt scale) — Spectrometric method
90.93
ISO 8660:1988
Caprolactam for industrial use — Determination of permanganate index — Spectrometric method
95.99
ISO 8660:2002
Plastics — Determination of permanganate absorption number of caprolactam — Spectrometric method
90.93
ISO 8661:1988
Caprolactam for industrial use — Determination of volatile bases content — Titrimetric method after distillation
90.93
ISO 10927:2011
Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
95.99
ISO 10927:2018
Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
60.60
ISO 11337:2004
Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography
95.99
ISO 11337:2004/Cor 1:2007
Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography — Technical Corrigendum 1
95.99
ISO 11337:2010
Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography
90.93
ISO 11357-1:1997
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
95.99
ISO 11357-1:2009
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
95.99
ISO 11357-1:2016
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
60.60
ISO 11357-2:1999
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature
95.99
ISO 11357-2:2013
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height
90.92
ISO 11357-3:1999
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
95.99
ISO 11357-3:1999/Amd 1:2005
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization — Amendment 1
95.99
ISO 11357-3:2011
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
95.99
ISO 11357-3:2018
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
60.60
ISO 11357-4:2005
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
95.99
ISO 11357-4:2014
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
90.92
ISO 11357-5:1999
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
95.99
ISO 11357-5:2013
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
90.93
ISO 11357-6:2002
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time
95.99
ISO 11357-6:2002/Amd 1:2007
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time — Amendment 1
95.99
ISO 11357-6:2008
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
95.99
ISO 11357-6:2018
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
60.60
ISO 11357-7:2002
Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
95.99
ISO 11357-7:2015
Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
60.60
ISO/CD 11357-4
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
30.99
ISO/DIS 11357-8
Plastics — Differential scanning calorimetry — Part 8: Determination of thermal conductivity
40.00
ISO/FDIS 11357-2
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
50.20
ISO 11358-1:2014
Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
90.92
ISO 11358-2:2005
Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
95.99
ISO 11358-2:2014
Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
90.92
ISO 11358-3:2013
Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
90.92
ISO 11358:1997
Plastics — Thermogravimetry (TG) of polymers — General principles
95.99
ISO/CD 11358-2
Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
30.99
ISO/CD 11358-3
Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
30.99
ISO/WD 11358-1
Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
20.99
ISO 11359-1:1999
Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
95.99
ISO 11359-1:2014
Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
90.93
ISO 11359-2:1999
Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
90.93
ISO 11359-3:2002
Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
95.99
ISO 11359-3:2019
Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
60.60
ISO 11443:1995
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
95.99
ISO 11443:2005
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
95.99
ISO 11443:2014
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
90.92
ISO/CD 11443
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
30.99
ISO 12058-1:1997
Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
95.99
ISO 12058-1:2018
Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
60.60
ISO 13468-1:1996
Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument
95.99
ISO 13468-1:2019
Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument
60.60
ISO 13468-2:1999
Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument
90.93
ISO 14782:1999
Plastics — Determination of haze for transparent materials
90.93
ISO 14782:1999/Cor 1:2005
Plastics — Determination of haze for transparent materials — Technical Corrigendum 1
60.60
ISO 14851:1999/Cor 1:2005
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer — Technical Corrigendum 1
95.99
ISO 14853:2005
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production
95.99
ISO 14853:2005/Cor 1:2009
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production — Technical Corrigendum 1
95.99
ISO 14855-1:2005
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method
95.99
ISO 14855-1:2005/Cor 1:2009
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method — Technical Corrigendum 1
95.99
ISO 14855:1999
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide
95.99
ISO 14855:1999/Amd 1:2004
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Amendment 1: Use of activated vermiculite instead of mature compost
95.99
ISO 15033:2000
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
95.99
ISO 15033:2007
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
95.99
ISO 15033:2018
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
60.60
ISO 15512:1999
Plastics — Determination of water content
95.99
ISO 15512:2008
Plastics — Determination of water content
95.99
ISO 15512:2014
Plastics — Determination of water content
95.99
ISO 15512:2016
Plastics — Determination of water content
95.99
ISO 15512:2019
Plastics — Determination of water content
60.60
ISO 15985:2004
Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas
95.99
ISO 15985:2004/Cor 1:2007
Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas — Technical Corrigendum 1
95.99
ISO 16014-1:2003
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
95.99
ISO 16014-1:2003/Cor 1:2005
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles — Technical Corrigendum 1
95.99
ISO 16014-1:2012
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
95.99
ISO 16014-1:2019
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles
60.60
ISO 16014-2:2003
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
95.99
ISO 16014-2:2012
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
95.99
ISO 16014-2:2019
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
60.60
ISO 16014-3:2003
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
95.99
ISO 16014-3:2012
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
95.99
ISO 16014-3:2019
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
60.60
ISO 16014-4:2003
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
95.99
ISO 16014-4:2012
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
95.99
ISO 16014-4:2019
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
60.60
ISO 16014-5:2012
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 5: Method using light-scattering detection
95.99
ISO 16014-5:2019
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method
60.60
ISO 16790:2005
Plastics — Determination of drawing characteristics of thermoplastics in the molten state
90.92
ISO/CD 16790
Plastics — Determination of drawing characteristics of thermoplastics in the molten state
30.99
ISO 16929:2002
Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
95.99
ISO 17088:2008
Specifications for compostable plastics
95.99
ISO 17221:2014
Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image)
90.93
ISO 17223:2014
Plastics — Determination of yellowness index and change in yellowness index
90.93
ISO 17556:2003
Plastics — Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
95.99
ISO 17744:2004
Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method
90.93
ISO 19929:2017
Plastics — Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
60.60
ISO 19935-1:2018
Plastics — Temperature modulated DSC — Part 1: General principles
60.60
ISO/CD 19935-3
Plastics — Temperature modulated DSC — Part 3: Separation of overlapping thermal transitions
30.60
ISO/DIS 19935-2
Plastics — Temperature modulated DSC — Part 2: Measurement of accurate specific heat Cp
40.60
ISO 20200:2004
Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
95.99
ISO 20965:2005
Plastics — Determination of the transient extensional viscosity of polymer melts
90.92
ISO/CD 20965
Plastics — Determination of the transient extensional viscosity of polymer melts
30.99
ISO 22007-1:2009
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
95.99
ISO 22007-1:2017
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
60.60
ISO 22007-2:2008
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
95.99
ISO 22007-2:2015
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
60.60
ISO 22007-3:2008
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
90.93
ISO 22007-4:2008
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
95.99
ISO 22007-4:2017
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
60.60
ISO 22007-6:2014
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
90.93
ISO/TR 22007-5:2011
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
60.60
ISO/CD 23673.2
Plastics — Elasticity index — Determination of elastic property of melts
30.20
ISO/DIS 23976
Plastics — Fast differential scanning calorimetry — Chip calorimetry
40.00
ISO 24538:2008
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
90.93
ISO 25337:2010
Plastics — Production quality control — Statistical method for using single measurements
90.93
ISO/DIS 26723
Plastics — Determination of total luminous transmittance and reflectance
40.99
IEC/AWI 62321-11
Determination of certain substances in electrotechnical products — Part 11: Tris(2-chloroethyl) phosphate (TCEP) in polymers and electronics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS)
20.00

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.