• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 45/SC 4 Секретариата Этап ICS
ISO/R 1398:1970
Withdrawal of ISO/R 1398-1970
95.99
ISO 1419:1995
Rubber- or plastics-coated fabrics — Accelerated-ageing tests
95.99
ISO 1419:2018
Rubber- or plastics-coated fabrics — Accelerated-ageing tests
95.99
ISO 1419:2019
Rubber- or plastics-coated fabrics — Accelerated-ageing tests
60.60
ISO 1420:1987
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
95.99
ISO 1420:2001
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
95.99
ISO 1420:2016
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
60.60
ISO 1421:1998
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
95.99
ISO 1421:2016
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
60.60
ISO 1433:1995
Rubber, vulcanized — Preferred gradations of properties
95.99
ISO 1798:1997
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
95.99
ISO 1798:1997/Cor 1:2003
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break — Technical Corrigendum 1
95.99
ISO 1798:2008
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
90.93
ISO 1856:2000
Flexible cellular polymeric materials — Determination of compression set
95.99
ISO 1856:2000/Amd 1:2007
Flexible cellular polymeric materials — Determination of compression set — Amendment 1
95.99
ISO 1856:2018
Flexible cellular polymeric materials — Determination of compression set
60.60
ISO 2230:1973
Vulcanized rubber — Guide to storage
95.99
ISO 2230:2002
Rubber products — Guidelines for storage
90.93
ISO 2231:1989
Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing
90.60
ISO 2286-1:1998
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass
95.99
ISO 2286-1:2016
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass
60.60
ISO 2286-2:1998
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
95.99
ISO 2286-2:2016
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
60.60
ISO 2286-3:1998
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness
95.99
ISO 2286-3:2016
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness
60.60
ISO 2321:1983
Rubber threads — Methods of test
95.99
ISO 2321:2006
Rubber threads — Methods of test
95.99
ISO 2321:2017
Rubber threads — Methods of test
60.60
ISO 2411:2000
Rubber- or plastics-coated fabrics — Determination of coating adhesion
95.99
ISO 2411:2017
Rubber- or plastics-coated fabrics — Determination of coating adhesion
60.60
ISO 2439:1980
Polymeric materials, cellular flexible — Determination of hardness (indentation technique)
95.99
ISO 2439:1997
Flexible cellular polymeric materials — Determination of hardness (indentation technique)
95.99
ISO 2439:1997/Cor 1:1998
Flexible cellular polymeric materials — Determination of hardness (indentation technique) — Technical Corrigendum 1
95.99
ISO 2439:2008
Flexible cellular polymeric materials — Determination of hardness (indentation technique)
90.93
ISO 2440
Flexible and rigid cellular polymeric materials — Accelerated ageing tests
60.00
ISO 2440:1997
Flexible and rigid cellular polymeric materials — Accelerated ageing tests
90.92
ISO 2440:1997/Amd 1:2010
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 1
60.60
ISO 2440:1997/Amd 2:2014
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 2
60.60
ISO 3011:1997
Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions
90.92
ISO/CD 3011
Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions
30.60
ISO 3302-1:1996
Rubber — Tolerances for products — Part 1: Dimensional tolerances
95.99
ISO 3302-1:1996/Amd 1:2001
Rubber — Tolerances for products — Part 1: Dimensional tolerances — Amendment 1: Classification system for flash
95.99
ISO 3302-1:2014
Rubber — Tolerances for products — Part 1: Dimensional tolerances
90.60
ISO 3302-2:1998
Rubber — Tolerances for products — Part 2: Geometrical tolerances
95.99
ISO 3302-2:2008
Rubber — Tolerances for products — Part 2: Geometrical tolerances
90.93
ISO 3302:1990
Rubber — Dimensional tolerances for use with products
95.99
ISO 3303-1:2012
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method
90.92
ISO 3303-2:2012
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
90.92
ISO 3303:1990
Rubber- or plastics-coated fabrics — Determination of bursting strength
95.99
ISO/DIS 3303-1
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method
40.20
ISO/DIS 3303-2
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
40.20
ISO 3385:1989
Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding
95.99
ISO 3385:2014
Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding
90.60
ISO 3386-1:1986
Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials
90.93
ISO 3386-1:1986/Amd 1:2010
Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials — Amendment 1
60.60
ISO 3386-2:1997
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials
90.93
ISO 3386-2:1997/Amd 1:2010
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials — Amendment 1
60.60
ISO 3582:2000
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
90.93
ISO 3582:2000/Amd 1:2007
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1
60.60
ISO 3934:1978
Rubber building gaskets — Materials in preformed solid vulcanizates used for sealing glazing and panels — Specification
95.99
ISO 3934:2002
Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods
90.92
ISO/CD 3934
Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods
30.60
ISO 4633:1983
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99
ISO 4633:1996
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99
ISO 4633:2002
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99
ISO 4633:2015
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
60.60
ISO 4635:1982
Rubber, vulcanized — Preformed compression seals for use between concrete motorway paving sections — Specification for material
95.99
ISO 4635:2011
Rubber, vulcanized — Preformed joint seals for use between concrete paving sections of highways — Specification
90.93
ISO 4637:1979
Rubber-coated fabrics — Determination of rubber-to-fabric adhesion — Direct tension method
90.93
ISO 4638:1984
Polymeric materials, cellular flexible — Determination of air flow permeability
90.93
ISO 4646:1989
Rubber- or plastics-coated fabrics — Low-temperature impact test
90.60
ISO 4651:1988
Cellular rubbers and plastics — Determination of dynamic cushioning performance
90.93
ISO 4651:1988/Amd 1:2006
Cellular rubbers and plastics — Determination of dynamic cushioning performance — Amendment 1
60.60
ISO 4674-1:2003
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods
95.99
ISO 4674-1:2016
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods
60.60
ISO 4674-2:1998
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method
90.92
ISO 4674:1977
Fabrics coated with rubber or plastics — Determination of tear resistance
95.99
ISO/CD 4674-2
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method
30.60
ISO 4675:1990
Rubber- or plastics-coated fabrics — Low-temperature bend test
95.99
ISO 4675:2017
Rubber- or plastics-coated fabrics — Low-temperature bend test
60.60
ISO 5470-1:1999
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader
95.99
ISO 5470-1:2016
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader
60.60
ISO 5470-2:2003
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader
90.92
ISO/CD 5470-2
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader
30.60
ISO 5473:1997
Rubber- or plastics-coated fabrics — Determination of crush resistance
90.93
ISO 5892:1981
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification
95.99
ISO 5892:2013
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification
90.93
ISO 5978:1990
Rubber- or plastics-coated fabrics — Determination of blocking resistance
90.93
ISO 5979:1982
Rubber or plastics coated fabrics — Determination of flexibility — Flat loop method
90.93
ISO 5981:1997
Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing and rubbing
95.99
ISO 5981:2007
Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing and rubbing
90.93
ISO 5999:1982
Polymeric materials, cellular flexible — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
95.99
ISO 5999:2007
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
95.99
ISO 5999:2013
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
90.93
ISO 6072:2011
Rubber — Compatibility between hydraulic fluids and standard elastomeric materials
90.93
ISO 6123-1:1982
Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness
95.99
ISO 6123-1:2015
Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness
60.60
ISO 6123-2:1988
Rubber- or plastics-covered rollers — Specifications — Part 2: Surface characteristics
95.99
ISO 6123-2:2015
Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics
60.60
ISO 6123-3:1985
Rubber- or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
90.93
ISO 6446:1994
Rubber products — Bridge bearings — Specification for rubber materials
90.93
ISO 6447:1983
Rubber seals — Joint rings used for gas supply pipes and fittings — Specification for material
95.99
ISO 6448:1985
Rubber seals — Joint rings used for petroleum product supply pipes and fittings — Specification for material
95.99
ISO 6450:2005
Rubber- or plastics-coated fabrics — Determination of resistance to liquids
90.92
ISO/CD 6450
Rubber- or plastics-coated fabrics — Determination of resistance to liquids
30.60
ISO 6451:1982
Plastics coated fabrics — Polyvinyl chloride coatings — Rapid method for checking fusion
90.60
ISO 6452:2000
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
95.99
ISO 6452:2007
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
90.92
ISO/CD 6452
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
30.60
ISO 6453:1985
Polymeric materials, cellular flexible — Polyvinylchloride foam sheeting — Specification
90.93
ISO 6915:1991
Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification
95.99
ISO 6915:2019
Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification
60.60
ISO 6916-1:1995
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting
90.93
ISO 6916-1:1995/Amd 1:2007
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Amendment 1
60.60
ISO 6916-1:1995/Cor 1:2002
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Technical Corrigendum 1: Sheeting
60.60
ISO 6916-2:2001
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions
90.93
ISO 7229:1997
Rubber- or plastics-coated fabrics — Measurement of gas permeability
95.99
ISO 7229:2015
Rubber- or plastics-coated fabrics — Measurement of gas permeability
60.60
ISO 7231:1984
Polymeric materials, cellular flexible — Method of assessment of air flow value at constant pressure-drop
95.99
ISO 7231:2010
Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop
90.93
ISO 7617-1:1994
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics
95.99
ISO 7617-1:2001
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics
90.93
ISO 7617-2:1994
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics
95.99
ISO 7617-2:2003
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics
90.93
ISO 7617-3:1988
Plastics-coated fabrics for upholstery — Part 3: Specification for polyurethane-coated woven fabrics
90.93
ISO/TR 7620:1986
Rubber materials — Chemical resistance
95.99
ISO/TR 7620:2005
Rubber materials — Chemical resistance
90.93
ISO/TR 7621:1982
Rubber or plastics covered rollers — Enquiries and orders — Recommendations for technical information to be supplied by purchaser
90.93
ISO 7854:1995
Rubber- or plastics-coated fabrics — Determination of resistance to damage by flexing
90.93
ISO 8067:1989
Flexible cellular polymeric materials — Determination of tear strength
95.99
ISO 8067:2008
Flexible cellular polymeric materials — Determination of tear strength
95.99
ISO 8067:2018
Flexible cellular polymeric materials — Determination of tear strength
60.60
ISO 8095:1990
PVC-coated fabrics for tarpaulins — Specification
90.93
ISO 8096-1:1989
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics
95.99
ISO 8096-1:1989/Cor 1:1991
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics — Technical Corrigendum 1
95.99
ISO 8096-2:1989
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 2: Polyurethane- and silicone elastomer-coated fabrics
95.99
ISO 8096-3:1988
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 3: Natural rubber- and synthetic rubber-coated fabrics
95.99
ISO 8096:2005
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification
90.93
ISO 8096:2005/Cor 1:2005
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Technical Corrigendum 1
60.60
ISO 8307:1990
Flexible cellular polymeric materials — Determination of resilience
95.99
ISO 8307:2007
Flexible cellular polymeric materials — Determination of resilience by ball rebound
95.99
ISO 8307:2018
Flexible cellular polymeric materials — Determination of resilience by ball rebound
60.60
ISO/TR 8517:1988
Rubber- or plastics-covered rollers — Glossary
90.93
ISO 9631:1991
Rubber seals — Joint rings for hot water supply pipelines up to 110 degrees C — Specification for the material
95.99
ISO 9631:2003
Rubber seals — Joint rings for pipelines for hot-water supply up to 110 degrees C — Specification for the material
95.99
ISO 9631:2018
Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material
60.60
ISO 9691:1992
Rubber — Recommendations for the workmanship of pipe joint rings — Description and classification of imperfections
90.93
ISO 10066:1991
Flexible cellular polymeric materials — Determination of creep in compression
90.93
ISO 10282:1994
Single-use sterile surgical rubber gloves — Specification
95.99
ISO 10282:2002
Single-use sterile rubber surgical gloves — Specification
95.99
ISO 10282:2002/Cor 1:2005
Single-use sterile rubber surgical gloves — Specification — Technical Corrigendum 1
95.99
ISO 10282:2014
Single-use sterile rubber surgical gloves — Specification
90.60
ISO 11193-1:2002
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
95.99
ISO 11193-1:2002/Amd 1:2007
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Amendment 1
95.99
ISO 11193-1:2002/Cor 1:2005
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Technical Corrigendum 1
95.99
ISO 11193-1:2008
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
90.92
ISO 11193-1:2008/Amd 1:2012
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Amendment 1
60.60
ISO 11193-2:2006
Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride)
90.93
ISO 11193:1994
Single-use rubber examination gloves — Specification
95.99
ISO/DIS 11193-1
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
40.20
ISO 11752:2000
Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts
90.93
ISO 11752:2000/Amd 1:2006
Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts — Amendment 1
60.60
ISO 13362:2000
Flexible cellular polymeric materials — Determination of compression set under humid conditions
90.93
ISO 14285:2014
Rubber and plastics gloves for food services — Limits for extractable substances
90.60
ISO 16010:2005
Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
95.99
ISO 16010:2019
Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
60.60
ISO/DTR 17051
Rubber, vulcanized — Guidelines for material specification
30.20
ISO 17717:2017
Meteorological balloons — Specification
60.60
ISO 20057:2017
Rubber household gloves — General requirements and test methods
60.60
ISO 20058:2017
General purpose rubber thread — Specification
60.60
ISO 20437:2017
Natural rubber latex cleanroom gloves — Specification
60.60
ISO/DIS 22751
Rubber or plastic coated fabrics — Physical and mechanical test — Determination of bending force
40.20
ISO 22762-1:2005
Elastomeric seismic-protection isolators — Part 1: Test methods
95.99
ISO 22762-1:2005/Cor 1:2006
Elastomeric seismic-protection isolators — Part 1: Test methods — Technical Corrigendum 1
95.99
ISO 22762-1:2010
Elastomeric seismic-protection isolators — Part 1: Test methods
95.99
ISO 22762-1:2018
Elastomeric seismic-protection isolators — Part 1: Test methods
60.60
ISO 22762-2:2005
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
95.99
ISO 22762-2:2005/Cor 1:2006
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications — Technical Corrigendum 1
95.99
ISO 22762-2:2010
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
95.99
ISO 22762-2:2018
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
60.60
ISO 22762-3:2005
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
95.99
ISO 22762-3:2005/Cor 1:2006
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications — Technical Corrigendum 1
95.99
ISO 22762-3:2010
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
95.99
ISO 22762-3:2018
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
60.60
ISO/CD 22762-5
Elastomeric seismic-protection isolators ― Part 5: Sliding seismic-protection isolators for buildings — Part 5: Titre manque
30.60
ISO/TS 22762-4:2014
Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3
95.99
ISO/TS 22762-4:2019
Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3
60.60
ISO/WD 22762-6
Elastomeric seismic-protection isolators — Part 6: Part 6: High-durability and high-performance specifications, and test methods
20.00
ISO/DIS 22843
Rubber bands — General requirements and test methods
40.20
ISO/CD 22941
Rubber sheets for livestock — Specification
30.60
ISO/DIS 23464
Nitrile cleanroom gloves — Specification
40.20
ISO/WD 23589
Rubber latex artificial breast — Specification
20.98
ISO/CD 23641
Flexible cellular polymeric materials ― Determination of antibacterial effectiveness
30.60
ISO 23711:2003
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
90.93
ISO 24999:2008
Flexible cellular polymeric materials — Determination of fatigue by a constant-strain procedure
90.93
ISO 25518:2009
Single-use rubber gloves for general applications — Specification
90.60
ISO 32100:2010
Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex resistance by the flexometer method
95.99
ISO 32100:2018
Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex resistance by the flexometer method
60.60

По запросу ничего не найдено