Каталог стандартов

Withdrawal of ISO/R 33-1957

Rubber latex, natural -- Determination of mechanical stability

Determination of the adhesion strength of vulcanized rubbers to textile fabrics

Rubber latex -- Sampling

Rubber latices -- Determination of total solids content

Rubber latex, natural -- Determination of dry rubber content

Natural rubber latex -- Determination of KOH number

Rubber, vulcanized -- Accelerated ageing or heat-resistance tests

Rubber -- Determination of ash

Rubbers, raw -- Determination of volatile matter content

Raw natural rubber -- Determination of dirt

Rubber, raw natural -- Determination of dirt content

Determination of viscosity of natural and synthetic rubbers by the shearing disk viscometer

Natural rubber latex, concentrated -- Preparation of dry films

Natural rubber latex -- Determination of volatile fatty acid number

Rubber latices -- Determination of coagulum content

Method of test for temperature limit of brittleness for vulcanized rubbers

Vulcanized rubber -- Determination of adhesion to metal -- One-plate method

Vulcanized rubber -- Determination of adhesion to metal -- Two-plate method

Vulcanized rubbers -- Determination of compression set under constant deflection at normal and high temperatures

Rubber latices -- Determination of pH

Rubber compounding ingredients -- Carbon black -- Sampling shipments in bulk or in bins

Carbon black for use in the rubber industry -- Determination of loss on heating

Carbon black for use in the rubber industry -- Determination of iodine adsorption number

Rubber compounding ingredients -- Carbon black (pelletized) -- Determination of pour density

Rubber -- Vocabulary

Rubber -- Vocabulary

Rubber -- Vocabulary

Rubber -- Vocabulary

Rubber -- Vocabulary

Rubber -- Vocabulary

Vulcanized and unvulcanized compounded rubber -- Determination of copper content -- Zinc diethyldithiocarbamate photometric method

Compounded rubber -- Determination of manganese content -- Sodium periodate photometric method

General purpose rubber agricultural spray hose

Rubber hose -- Hydrostatic testing

General purpose rubber water hose

Rubber -- Determination of solvent extract

Vulcanized rubber -- Determination of carbon black content -- Pyrolytic method

Rubber -- Determination of carbon black content -- Pyrolytic and chemical degradation methods

Fabrics coated with rubber or plastics -- Accelerated ageing and simulated service tests

Rubber or plastics coated fabric -- Determination of resistance to penetration by water

Fabrics coated with rubber or plastics -- Determination of breaking strength and elongation at break

Rubber vulcanized -- Resistance to ozone cracking -- Part 1: Static strain test

Rubber, vulcanized -- Preferred gradations of properties

Rubber compounding ingredients -- Carbon black (pelletized) -- Determination of sieve residue

Rubber products -- Hoses and hose assemblies -- Wire reinforced hydraulic type

Carbon black for use in the rubber industry -- Determination of sieve residue

Rubbers and latices -- Nomenclature

Rubber and latices -- Nomenclature

Rubber and latices -- Nomenclature

Rubber and latices -- Nomenclature

Rubber latex -- Determination of viscosity

Raw rubber and rubber latex -- Determination of copper

Raw rubber and rubber latex -- Determination of manganese content -- Potassium periodate photometric method

Raw natural rubber and natural rubber latex -- Determination of nitrogen

Rubber, raw natural, and rubber latex, natural -- Determination of nitrogen content

Raw rubber and rubber latex -- Determination of iron content -- 1,10- Phenanthroline photometric method

Withdrawal of ISO/R 1794-1971

Raw rubber in bales -- Sampling

Polymeric materials, cellular flexible -- Determination of tensile strength and elongation at break

Natural rubber latex -- Determination of boric acid

Vulcanized rubbers -- Resistance to liquids -- Methods of test

Rubber, vulcanized -- Determination of modulus in shear -- Quadruple shear method

Withdrawal of ISO 1855-1975

Polymeric materials, cellular flexible -- Determination of compression set

Rubber, natural (NR) -- Specifications

Raw styrene-butadiene rubber (SBR) -- Determination of organic acid content

Raw styrene-butadiene rubber (SBR) -- Determination of soap content

Rubber latex, natural -- Centrifuged or creamed, ammonia-preserved types -- Specification

Natural rubber latex -- Determination of sludge content

Synthetic rubber latex -- Determination of high-speed mechanical stability

Rubber, unvulcanized -- Determination of plasticity -- Rapid plastimeter method

Rubber latex, styrene-butadiene -- Determination of volatile unsaturates

Lined industrial rubber footwear

Rubber -- Synthetic latices -- Preparation of dry polymer

Withdrawal of ISO 2058-1973

Fabric coated with rubber or plastics -- Standard atmospheres for conditioning and testing

Rubber, vulcanized -- Determination of tension set at normal and high temperatures

Fabrics coated with rubber or plastics -- Determination of roll characteristics

Rubber- or plastics-coated fabrics -- Determination of roll characteristics

Rubber, isobutene-isoprene (IIR) -- Evaluation procedures

Rubber, raw styrene-butadiene, emulsion polymerized -- Test recipe and method of evaluation

Industrial rubber hose for compressed air (up to 2,5 MPa)

Rubber- or plastics-coated fabrics -- Determination of coating adhesion

Rubber- or plastics-coated fabrics -- Determination of coating adhesion

Polymeric materials, cellular flexible -- Accelerated ageing tests

Styrene-butadiene copolymers -- Determination of bound styrene content

Rubber products -- Determination of zinc content -- EDTA titrimetric method

Rubber, butadiene (BR) -- Solution- polymerized types -- Test recipe and evaluation of vulcanization characteristics

Rubber, vulcanized -- Determination of density

Rubber, vulcanized -- Antistatic and conductive products -- Determination of electrical resistance

Rubber hose for liquefied petroleum gases (LPG)

Rubber or plastics coated fabrics -- Determination of resistance to ozone cracking under static conditions

Rubber compounding ingredients - Carbon black - Test recipe and method of evaluation in styrene- butadiene rubbers

Rubber -- Dimensional tolerances of solid moulded and extruded products

Rubber- or plastics-coated fabrics -- Determination of bursting strength

Rubber -- General directions for achieving elevated or sub-normal temperatures for tests

Rubber, vulcanized -- Determination of stress relaxation in compression at normal and at elevated temperatures

Cellular polymeric flexible materials -- Determination of fatigue by constant load pounding

Flexible cellular materials -- Determination of compression stress/strain characteristic and compression stress value -- Part 1: Low density materials

Polymeric materials, cellular flexible -- Determination of stress-strain characteristic in compression -- Part 2: High density materials

Rubber -- Measurement of vulcanization characteristics with the oscillating disc curemeter

Cellular plastic and cellular rubber materials -- Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame

Rubber hoses and hose assemblies -- Rubber-covered, spiral wire reinforced, hydraulic type

Rubber -- Nitrile latex -- Determination of residual acrylonitrile content

Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type

Rubber hoses for steam -- Methods of test

Rubber products -- Hoses and hose assemblies, textile reinforced, for hydraulic purposes

Rubber products -- Hoses -- Determination of gas permeance

Withdrawal of ISO/TR 4088-1977

Rubber, ethylene-propylene-diene (EPDM) -- Non-oil extended raw general purpose types -- Evaluation procedures

Rubber, vulcanized -- Classification -- Part 1: Description of the classification system

Rubber products -- Textile-reinforced hoses for water suction

Plastics moulded footwear -- Polyvinyl chloride industrial boots -- Specification

Rubber or plastics coated fabrics -- Low temperature impact test

Rubber, vulcanized -- Determination of dimensions of test pieces and products for test purposes

Cellular rubbers and plastics -- Determination of dynamic cushioning performance

Rubber -- Reinforced styrene-butadiene latex -- Determination of total bound styrene content

Carbon black for use in the rubber industry -- Determination of dibutylphthalate absorption number -- Part 1: Method using absorptiometer

Rubber compounding ingredients -- Carbon black -- Determination of dibutylphthalate absorption number -- Part 2: Method using plastograph or plasticorder

Rubber, acrylonitrile-butadiene (NBR) -- Test recipe and evaluation of vulcanization characteristics

Rubber, raw styrene-butadiene (carbon black or carbon black and oil masterbatches) -- Test recipe and method of evaluation

Rubber, raw natural -- Colour index test

Rubber -- Determination of rebound resilience of vulcanizates

Rubber -- Determination of dynamic behaviour of vulcanizates at low frequencies -- Torsion pendulum method

Rubber -- Determination of dynamic properties of vulcanizates for classification purposes (by forced sinusoidal shear strain)

Rubber products -- Hoses -- Low-temperature flexibility tests

Fabrics coated with rubber or plastics -- Low temperature bend test

Rubber compounding ingredients -- Carbon black -- Determination of tinting strength

Rubber or plastics coated fabrics -- Determination of abrasion resistance

Rubber- or plastics-coated fabrics -- Determination of crush resistance

Rubber -- Identification of polymers -- Pyrolytic/gas chromatographic method -- Single polymers

Rubber -- Determination of styrene content -- Nitration method

Rubber -- Determination of adhesion to rigid materials using conical shaped parts

Rubber -- Determination of polyisoprene content

Rubber or plastics coated fabrics -- Determination of blocking resistance

Rubber or plastics coated fabrics -- Determination of flex abrasion

Rubber, vulcanized -- Determination of compression stress relaxation (rings)

Rubber -- Determination of metal content -- Flame atomic absorption spectrometric method -- Part 1: Determination of zinc content

Rubber -- Determination of metal content -- Flame atomic absorption spectrometric method -- Part 2: Determination of lead content

Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 3: Determination of copper content

Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 4: Determination of manganese content

Plastics moulded footwear -- Lined or unlined polyvinyl chloride industrial boots with chemical resistance

Plastics moulded footwear -- Lined or unlined polyvinyl chloride industrial boots with general purpose resistance to oils and fats

Rubber or plastics covered rollers -- Specifications -- Part 2: Classification of surface characteristics

Fabrics coated with vulcanized rubber -- Determination of vapour transmission rate of volatile liquids (Gravimetric technique)

Rubber compounding ingredients -- Carbon black -- Determination of solvent extractable material

Rubber, raw, natural -- Determination of castor oil content -- Part 2: Determination of total ricinoleic acid content -- Gas chromatographic method

Rubber, raw -- Determination of block polystyrene content -- Ozonolysis method

Rubber or plastics coated fabrics -- Determination of discolouration by cigarette smoke

Rubber compounding ingredients -- Abbreviations

Rubber compounding ingredients -- Abbreviations

New materials

Rubber compounding ingredients -- Abbreviations

Rubber compounding ingredients -- Symbols and abbreviated terms

Rubber compounding ingredients -- Abbreviated terms

Rubber -- Determination of total sulphur content -- Part 1: Oxygen combustion flask method

Rubber -- Determination of total sulfur content -- Part 2: Sodium peroxide fusion method

Rubber compounding ingredients -- Carbon black -- Standard reference blacks

Rubber footwear -- Vulcanized resin rubber and vulcanized hard rubber soling materials -- Specification

Polymeric materials, cellular flexible -- Polyurethane foam for laminate use -- Specification

Rubber -- Determination of free sulfur

Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method

Plastics-coated fabrics for upholstery -- Part 1: Specification for PVC-coated knitted fabrics

Plastics-coated fabrics for upholstery -- Part 2: Specification for PVC-coated woven fabrics

Rubbers and rubber latices -- Determination of manganese content -- Sodium periodate photometric methods

Rubber, raw styrene-butadiene -- Soap and organic acid content -- Determination

Rubber- or plastics-coated fabrics -- Determination of resistance to damage by flexing (dynamic method)

Rubber and latex -- Determination of copper content -- Photometric method

Rubber, compounded or vulcanized -- Determination of sulfide sulfur content -- Iodometric method

Rubber, vulcanized -- Classification -- Rubber materials

Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers

Rubber compounds, raw rubbers and compounding materials -- Short terms for properties reported in certificates of analysis

Thermoplastic elastomers -- Nomenclature and abbreviated terms

Thermoplastic elastomers -- Nomenclature and abbreviated terms

Rubber -- Comprehensive review of the composition and nature of process fumes in the rubber industry

Rubber -- Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments -- Pyrolysis-GC/MS method

Rubber process fumes components -- Quantitative test methods

Rubber -- Generation and collection of tyre and road wear particles (TRWP) -- Road simulator laboratory method

Rubber -- Framework for physical and chemical characterization of tyre and road wear particles (TRWP)

Rubber -- Framework for assessing the environmental fate of tyre and road wear particles (TRWP)

Rubber and rubber products -- Environmental aspects -- General guidelines for their inclusion in standards