• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 29/SC 8 Секретариата Этап ICS
ISO 6751:1986
Ejector pins with cylindrical head — Dimensions
95.99
ISO 6751:1998
Tools for moulding — Ejector pins with cylindrical head
95.99
ISO 6751:2011
Tools for moulding — Ejector pins with cylindrical head
90.93
ISO 6752:1984
Round punches with 60 degrees conical head and straight shank
95.99
ISO 6752:2008
Tools for pressing — Round punches with 60 degrees conical head and straight shank
90.93
ISO 6753-1:1994
Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools, jigs and fixtures
95.99
ISO 6753-1:2005
Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools
90.93
ISO 6753-2:1998
Tools for pressing and moulding — Machined plates — Part 2: Machined plates for moulds
90.93
ISO 6753:1982
Machined plates for press tools, moulds, jigs and fixtures — Nominal dimensions
95.99
ISO 8017:1985
Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered
95.99
ISO 8017:2007
Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered
90.93
ISO 8018:1985
Mould guide bushes, headed, and locating guide bushes, headed
95.99
ISO 8018:2007
Tools for moulding — Guide bushes, headed, and locating guide bushes, headed
90.93
ISO 8020:1986
Punches with cylindrical head and reduced shank
95.99
ISO 8020:1992
Tools for pressing — Punches with cylindrical head and reduced shank
95.99
ISO 8020:2002
Tools for pressing — Punches with cylindrical head and straight or reduced shank
90.93
ISO 8021:1986
Round punches with cylindrical head and straight shank
95.99
ISO 8404:1986
Angle pins — Basic dimensions
95.99
ISO 8404:2003
Tools for moulding — Angle pins
95.99
ISO 8404:2013
Tools for moulding — Angle pins
90.92
ISO/CD 8404
Tools for pressing — Angle pins
30.99
ISO 8405:1986
Ejector sleeves with cylindrical head — Basic series for general purposes
95.99
ISO 8405:1998
Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes
95.99
ISO 8405:2013
Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes
90.92
ISO/DIS 8405
Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes
40.00
ISO 8406:1991
Mould bases — Locating elements
95.99
ISO 8406:2001
Tools for moulding — Mould bases — Round locating elements and spacers
95.99
ISO 8406:2008
Tools for moulding — Mould bases — Round locating elements and spacers
90.93
ISO 8693:1987
Tools for moulding — Flat ejector pins
95.99
ISO 8693:1998
Tools for moulding — Flat ejector pins
95.99
ISO 8693:2011
Tools for moulding — Flat ejector pins
90.93
ISO 8694:1987
Tools for moulding — Shouldered ejector pins
95.99
ISO 8694:1998
Tools for moulding — Shouldered ejector pins
95.99
ISO 8694:2011
Tools for moulding — Shouldered ejector pins
90.93
ISO 8695:1987
Tools for pressing — Punches — Nomenclature and terminology
95.99
ISO 8695:2010
Tools for pressing — Punches — Nomenclature and terminology
90.93
ISO 8977:1987
Tools for pressing — Round matrixes
95.99
ISO 8977:2003
Tools for pressing — Matrixes
90.93
ISO 8978:1987
Tools for pressing — Guides for round punches
95.99
ISO 9181:1990
Tools for pressing — Round punches with 60 degrees conical head and reduced shank
95.99
ISO 9181:2007
Tools for pressing — Round punches with 60 degrees conical head and reduced shank
90.93
ISO 9182-1:1992
Tools for pressing — Guide pillars — Part 1: Types
95.99
ISO 9182-1:2013
Tools for pressing — Guide pillars — Part 1: Types
90.93
ISO 9182-2:1992
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
95.99
ISO 9182-2:2013
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
90.93
ISO 9182-3:1992
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
95.99
ISO 9182-3:2013
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
90.92
ISO 9182-4:1992
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
95.99
ISO 9182-4:2013
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
90.92
ISO 9182-5:1992
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
95.99
ISO 9182-5:2013
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
90.92
ISO/DIS 9182-3
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
40.00
ISO/DIS 9182-4
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
40.00
ISO/DIS 9182-5
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
40.00
ISO 9183-1:1990
Tools for pressing — Wear plates for press dies — Part 1: Type A
95.99
ISO 9183-1:2008
Tools for pressing — Wear plates for press dies — Part 1: Type A
90.93
ISO 9183-2:1993
Tools for pressing — Wear plates for press dies — Part 2: Type B
95.99
ISO 9183-2:2011
Tools for pressing — Wear plates for press dies — Part 2: Type B
90.93
ISO 9448-10:1992
Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2
95.99
ISO 9448-10:2013
Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2
90.93
ISO 9448-11:1992
Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2
95.99
ISO 9448-11:2013
Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2
90.93
ISO 9448-1:1991
Tools for pressing — Guide bushes — Part 1: Forms
95.99
ISO 9448-1:2013
Tools for pressing — Guide bushes — Part 1: Forms
90.93
ISO 9448-2:1991
Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1
95.99
ISO 9448-2:2013
Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1
90.93
ISO 9448-3:1991
Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1
95.99
ISO 9448-3:2013
Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1
90.93
ISO 9448-4:1991
Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1
95.99
ISO 9448-4:2013
Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1
90.93
ISO 9448-5:1991
Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1
95.99
ISO 9448-5:2013
Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1
90.93
ISO 9448-6:1991
Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1
95.99
ISO 9448-6:2013
Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1
90.93
ISO 9448-7:1991
Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1
95.99
ISO 9448-7:2013
Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1
90.93
ISO 9448-8:1991
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1
95.99
ISO 9448-8:2013
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1
90.93
ISO 9448-9:1992
Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2
95.99
ISO 9448-9:2013
Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2
90.93
ISO 9449:1990
Tools for moulding — Centring sleeves
95.99
ISO 9449:2007
Tools for moulding — Centring sleeves
90.93
ISO 10069-1:1991
Tools for pressing — Elastomer pressure springs — Part 1: General specification
95.99
ISO 10069-1:2008
Tools for pressing — Elastomer pressure springs — Part 1: General specification
90.93
ISO 10069-2:1991
Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories
95.99
ISO 10069-2:2008
Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories
90.93
ISO 10071-1:2001
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty
95.99
ISO 10071-1:2008
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty
90.93
ISO 10071-2:2005
Tools for pressing — Ball-lock punches — Part 2: Ball-lock punches for heavy duty
90.93
ISO 10071:1991
Tools for pressing — Ball-lock punches
95.99
ISO 10072:1993
Tools for moulding — Sprue bushes — Dimensions
95.99
ISO 10072:2004
Tools for moulding — Sprue bushes — Dimensions
90.93
ISO 10073:1991
Tools for moulding — Support pillars
95.99
ISO 10073:2008
Tools for moulding — Support pillars
90.93
ISO 10242-1:1991
Tools for pressing — Punch holder shanks — Part 1: Types A and B
95.99
ISO 10242-1:1998
Tools for pressing — Punch holder shanks — Part 1: Type A
95.99
ISO 10242-1:2011
Tools for pressing — Punch holder shanks — Part 1: Type A
90.93
ISO 10242-2:1991
Tools for pressing — Punch holder shanks — Part 2: Type C
95.99
ISO 10242-2:2008
Tools for pressing — Punch holder shanks — Part 2: Type C
90.93
ISO 10242-3:1991
Tools for pressing — Punch holder shanks — Part 3: Type D
95.99
ISO 10242-3:2008
Tools for pressing — Punch holder shanks — Part 3: Type D
90.93
ISO 10243:1991
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
95.99
ISO 10243:2010
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
95.99
ISO 10243:2010/Amd 1:2011
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding — Amendment 1
95.99
ISO 10243:2019
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
60.60
ISO 10907-1:1996
Tools for moulding — Locating rings — Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds — Types A and B
95.99
ISO 10907-1:2008
Tools for moulding — Locating rings — Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
90.93
ISO 10907-2:2007
Tools for moulding — Locating rings — Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
90.93
ISO 11415:1997
Tools for pressing — Die sets
90.93
ISO 11900-1:1994
Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty
95.99
ISO 11900-1:2007
Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty
90.93
ISO 11900-2:2001
Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty
95.99
ISO 11900-2:2008
Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty
90.93
ISO 11900-3:2004
Tools for pressing — Ball-lock punch retainers — Part 3: Type E, reduced for heavy duty
90.93
ISO 11901-1:1995
Tools for pressing — Gas springs — Part 1: General specifications
95.99
ISO 11901-1:2003
Tools for pressing — Gas springs — Part 1: General specifications
90.93
ISO 11901-2:1995
Tools for pressing — Gas springs — Part 2: Specification of accessories
95.99
ISO 11901-2:2004
Tools for pressing — Gas springs — Part 2: Specification of accessories
95.99
ISO 11901-2:2018
Tools for pressing — Gas springs — Part 2: Specification of accessories
60.60
ISO 11901-3:2014
Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact built height
90.93
ISO 11901-4:2014
Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height
90.93
ISO/CD 11901-5
Tools for pressing — Gas springs — Part 5: Safety instructions for usage
30.20
ISO 11903:1996
Tools for pressing — Guide pillar mountings
95.99
ISO 11903:2008
Tools for pressing — Guide pillar mountings
90.93
ISO 12165:2000
Tools for moulding — Components of compression and injection moulds and diecasting dies — Terms and symbols
90.92
ISO/FDIS 12165
Tools for moulding — Components of compression and injection moulds and diecasting dies — List of equivalent terms and symbols
50.20
ISO 15600:2000
Tools for moulding — Thermal insulating sheets for injection moulds
90.93
ISO 16366:2001
Tools for pressing — L-shaped guides
95.99
ISO 16366:2008
Tools for pressing — L-shaped guides
90.93
ISO 16367:2001
Tools for pressing — Guide plates — U- and V-blocks
95.99
ISO 16367:2008
Tools for pressing — Guide plates — U- and V-blocks
90.93
ISO 16915:2003
Tools for moulding — Sprue pullers
90.93
ISO 16916:2004
Tools for moulding — Tool specification sheet for injection moulds
95.99
ISO 16916:2016
Tools for moulding — Tool specification sheet for injection moulds
60.60
ISO 18084:2005
Press tools for tablets — Punches and dies
95.99
ISO 18084:2011
Press tools for tablets — Punches and dies
90.93
ISO 20928:2018
Tools for pressing — Spring plungers with helicoidal compression steel spring or gas spring
60.60
ISO 20929:2018
Tools for pressing — Heel guidings in large stamping and forming dies
60.60
ISO/FDIS 21223
Tools for pressing — Vocabulary
50.00
ISO 23480:2008
Tools for pressing — Sliding plates
95.99
ISO 23480:2013
Tools for pressing — Sliding plates
90.93
ISO 23481:2008
Tools for pressing — Cam driver plates
95.99
ISO 23481:2013
Tools for pressing — Cam driver plates
90.92
ISO/DIS 23481
Tools for pressing — Cam driver plates
40.00
ISO 24233:2008
Tools for moulding — Tool specification sheet for diecasting dies
90.93
ISO 28238:2010
Compression and injection moulds — Components for gating systems
90.93

По запросу ничего не найдено