Подкомитет Заголовок подкомитета Опубликованные стандарты Стандарты, находящиеся на стадии разработки
ISO/TC 2/SC 7 Reference standards 21 0
ISO/TC 2/SC 11 Fasteners with metric external thread 55 11
ISO/TC 2/SC 12 Fasteners with metric internal thread 26 1
ISO/TC 2/SC 13 Fasteners with non-metric thread 21 1
ISO/TC 2/SC 14 Surface coatings 7 3
  • Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 2 Секретариата Этап ICS
ISO/R 273-1:1962
Withdrawal of ISO/R 273/1-1962
95.99
ISO/R 273-2:1968
Withdrawal of ISO/R 273/2-1968
95.99
ISO/R 288-1:1963
Slotted and castle nuts with metric thread
95.99
ISO/R 288-2:1969
Slotted and castle nuts with metric thread 42 up to and including 100 mm thread diameter
95.99
ISO/R 861:1968
Withdrawal of ISO/R 861-1968
95.99
ISO 887:1983
Plain washers for metric bolts, screws and nuts — General plan
95.99
ISO 887:2000
Plain washers for metric bolts, screws and nuts for general purposes — General plan
90.93
ISO 887:2000/Cor 1:2006
Plain washers for metric bolts, screws and nuts for general purposes — General plan — Technical Corrigendum 1
60.60
ISO 898-1:1978
Mechanical properties of fasteners — Part 1: Bolts, screws and studs
95.99
ISO 898-1:1988
Mechanical properties of fasteners — Part 1: Bolts, screws and studs
95.99
ISO 898-1:1999
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs
95.99
ISO 898-2:1980
Mechanical properties of fasteners — Part 2: Nuts with specified proof load values
95.99
ISO 898-3:2018
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes
60.60
ISO 898-4:1972
Withdrawal of ISO 898/4-1972
95.99
ISO 898-5:1980
Mechanical properties of fasteners — Part 5: Set screws and similar threaded fasteners not under tensile stresses
95.99
ISO 898-6:1988
Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread
95.99
ISO/R 898-3:1969
Withdrawal of ISO/R 898/3-1969
95.99
ISO 1051:1999
Rivet shank diameters
90.93
ISO/R 1051:1969
Rivet shank diameters (diameter range 1 to 36 mm)
95.99
ISO 1207:1983
Slotted cheese head screws — Product grade A
95.99
ISO 1234:1976
Split pins — Metric series
95.99
ISO 1234:1997
Split pins
90.93
ISO 1478:1983
Tapping screws thread
95.99
ISO/R 1480:1970
Hexagon head tapping screws — Inch series
95.99
ISO 1580:1983
Slotted pan head screws — Product grade A
95.99
ISO 2009:1983
Slotted countersunk flat head screws (common head style) — Product grade A
95.99
ISO 2010:1983
Slotted raised countersunk head screws (common head style) — Product grade A
95.99
ISO 2320:1983
Prevailing torque type steel hexagon nuts — Mechanical and performance properties
95.99
ISO 2320:1997
Prevailing torque type steel hexagon nuts — Mechanical and performance properties
95.99
ISO 2320:1997/Cor 1:2006
Prevailing torque type steel hexagon nuts — Mechanical and performance properties — Technical Corrigendum 1
95.99
ISO 2338:1972
Parallel pins, unhardened — Metric series
95.99
ISO 2338:1986
Parallel pins, unhardened
95.99
ISO 2338:1997
Parallel pins, of unhardened steel and austenitic stainless steel
90.93
ISO 2339:1974
Taper pins, unhardened — Metric series
95.99
ISO 2339:1986
Taper pins, unhardened
90.93
ISO 2340:1972
Clevis pins — Metric series
95.99
ISO 2340:1986
Clevis pins without head
90.93
ISO 2341:1972
Clevis pins with heads — Metric series
95.99
ISO 2341:1986
Clevis pins with head
90.93
ISO 2342:1972
Slotted headless screws — Metric series
95.99
ISO 2343:1972
Hexagon socket set screws — Metric series
95.99
ISO 2358:1972
Prevailing torque-type steel hexagon locknuts — Dimensions — Metric series
95.99
ISO 2359:1972
Prevailing torque-type steel hexagon locknuts — Dimensions — Inch series
95.99
ISO 2702:1974
Heat-treated steel tapping screws — Mechanical properties
95.99
ISO 2770:1974
Tapping screws according to ISO/R 1478 to 1483 — Minimum and maximum lengths
95.99
ISO 3269:1984
Fasteners — Acceptance inspection
95.99
ISO 3269:1988
Fasteners — Acceptance inspection
95.99
ISO 3506-1:1997
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs
95.99
ISO 3506-1:2009
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs
90.92
ISO 3506-2:1997
Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2: Nuts
95.99
ISO 3506-2:2009
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts
90.92
ISO 3506-3:1997
Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
95.99
ISO 3506-3:2009
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
90.92
ISO 3506-4:2003
Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 4: Tapping screws
95.99
ISO 3506-4:2009
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws
90.92
ISO 3506:1979
Corrosion-resistant stainless steel fasteners — Specifications
95.99
ISO/CD 3506-3
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
30.99
ISO/CD 3506-4
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws
30.99
ISO/CD 3506-5
Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 5: Special fasteners (including fasteners from nickel alloys) for heat resistance and high temperature applications
30.98
ISO/DIS 3506-5
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications
40.00
ISO/FDIS 3506-1
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs with specified grades and property classes
50.00
ISO/FDIS 3506-2
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts with specified property classes — Coarse pitch thread and fine pitch thread
50.00
ISO/FDIS 3506-6
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 6: Guidance for the selection of stainless steels and nickel alloys for fasteners
50.00
ISO 3800-1:1977
Threaded fasteners — Axial load fatigue testing — Part 1: Test methods
95.99
ISO 4014:1979
Hexagon head bolts — Product grades A and B
95.99
ISO 4014:1988
Hexagon head bolts — Product grades A and B
95.99
ISO 4016:1979
Hexagon head bolts — Product grade C
95.99
ISO 4016:1988
Hexagon head bolts — Product grade C
95.99
ISO 4017:1979
Hexagon head screws — Product grades A and B
95.99
ISO 4017:1988
Hexagon head screws — Product grades A and B
95.99
ISO 4018:1979
Hexagon head screws — Product grade C
95.99
ISO 4018:1988
Hexagon head screws — Product grade C
95.99
ISO 4026:1977
Hexagon socket set screws with flat point
95.99
ISO 4026:1993
Hexagon socket set screws with flat point
95.99
ISO 4027:1977
Hexagon socket set screws with cone point
95.99
ISO 4027:1993
Hexagon socket set screws with cone point
95.99
ISO 4028:1977
Hexagon socket set screws with dog point
95.99
ISO 4028:1993
Hexagon socket set screws with dog point
95.99
ISO 4029:1977
Hexagon socket set screws with cup point
95.99
ISO 4029:1993
Hexagon socket set screws with cup point
95.99
ISO 4032:1979
Hexagon nuts, style 1 — Product grades A and B
95.99
ISO 4032:1986
Hexagon nuts, style 1 — Product grades A and B
95.99
ISO 4033:1979
Hexagon nuts, style 2 — Product grades A and B
95.99
ISO 4034:1979
Hexagon nuts — Product grade C
95.99
ISO 4034:1986
Hexagon nuts — Product grade C
95.99
ISO 4035:1979
Hexagon thin nuts — Product grades A and B (chamfered)
95.99
ISO 4035:1986
Hexagon thin nuts (chamfered) — Product grades A and B
95.99
ISO 4036:1979
Hexagon thin nuts — Product grade B (unchamfered)
95.99
ISO 4042:1989
Threaded components — Electroplated coatings
95.99
ISO 4161:1983
Hexagon nuts with flange — Product grade A
95.99
ISO 4166:1979
Hexagon nuts for fine mechanics — Product grade F
95.99
ISO 4759-3:1991
Tolerances for fasteners — Part 3: Plain washers for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm — Product grades A and C
95.99
ISO 4759-3:2000
Tolerances for fasteners — Part 3: Plain washers for bolts, screws and nuts — Product grades A and C
95.99
ISO 4759-3:2016
Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F
60.60
ISO 4762:1977
Hexagon socket head cap screws — Product grade A
95.99
ISO 4762:1977/Amd 1:1984
Hexagon socket head cap screws — Product grade A — Amendment 1
95.99
ISO 4762:1989
Hexagon socket head cap screws — Product grade A
95.99
ISO 4762:1997
Hexagon socket head cap screws
95.99
ISO 4775:1984
Hexagon nuts for high-strength structural bolting with large width across flats — Product grade B — Property classes 8 and 10
95.99
ISO 7040:1983
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 — Property classes 5, 8 and 10
95.99
ISO 7041:1983
Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12
95.99
ISO 7041:1997
Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12
95.99
ISO 7042:1983
Prevailing torque type all-metal hexagon nuts, style 2 — Property classes 5, 8, 10 and 12
95.99
ISO 7043:1983
Prevailing torque type hexagon nuts with flange (with non-metallic insert)
95.99
ISO 7044:1983
Prevailing torque type all-metal hexagon nuts with flange
95.99
ISO 7045:1983
Cross-recessed pan head screws — Product grade A
95.99
ISO 7046:1983
Cross recessed countersunk flat head screws (common head style) — Product grade A and property class 4.8 only
95.99
ISO 7047:1983
Cross-recessed raised countersunk head screws (common head style) — Product grade A
95.99
ISO 7085:1999
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
95.99
ISO 7089:1983
Plain washers — Normal series — Product grade A
95.99
ISO 7089:2000
Plain washers — Normal series — Product grade A
90.93
ISO 7090:1983
Plain washers, chamfered — Normal series — Product grade A
95.99
ISO 7090:2000
Plain washers, chamfered — Normal series — Product grade A
90.93
ISO 7091:1983
Plain washers — Normal series — Product grade C
95.99
ISO 7091:2000
Plain washers — Normal series — Product grade C
90.93
ISO 7092:1983
Plain washers — Small series — Product grade A
95.99
ISO 7092:2000
Plain washers — Small series — Product grade A
90.93
ISO 7093-1:2000
Plain washers — Large series — Part 1: Product grade A
90.93
ISO 7093-2:2000
Plain washers — Large series — Part 2: Product grade C
90.93
ISO 7093:1983
Plain washers — Large series — Product grades A and C
95.99
ISO 7094:1983
Plain washers — Extra large series — Product grade C
95.99
ISO 7094:2000
Plain washers — Extra large series — Product grade C
90.93
ISO 7094:2000/Cor 1:2000
Plain washers — Extra large series — Product grade C — Technical Corrigendum 1
60.60
ISO 7380:1983
Hexagon socket button head screws — Metric series
95.99
ISO 7380:1997
Hexagon socket button head screws
95.99
ISO 7411:1984
Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) — Product grade C — Property classes 8.8 and 10.9
95.99
ISO 7412:1984
Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) — Product grade C — Property classes 8.8 and 10.9
95.99
ISO 7413:1984
Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) — Product grades A and B — Property classes 5, 6 and 8
95.99
ISO 7414:1984
Hexagon nuts for structural bolting with large width across flats, style 1 — Product grade B — Property class 10
95.99
ISO 7416:1984
Plain washers, chamfered, hardened and tempered for high-strength structural bolting
95.99
ISO 7417:1984
Hexagon nuts for structural bolting — Style 2, hot-dip galvanized (oversize tapped) — Product grade A — Property class 9
95.99
ISO 7719:1983
Prevailing torque type all-metal hexagon nuts, style 1 — Property classes 5, 8 and 10
95.99
ISO 7720:1983
Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9
95.99
ISO 8673:1988
Hexagon nuts, style 1, with metric fine pitch thread — Product grades A and B
95.99
ISO 8674:1988
Hexagon nuts, style 2, with metric fine pitch thread — Product grades A and B
95.99
ISO 8675:1988
Hexagon thin nuts with metric fine pitch thread — Product grades A and B
95.99
ISO 8676:1988
Hexagon head screws with metric fine pitch thread — Product grades A and B
95.99
ISO 8677:1986
Cup head square neck bolts with large head — Product grade C
95.99
ISO 8733:1986
Parallel pins with internal thread, unhardened
95.99
ISO 8733:1997
Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
90.93
ISO 8734:1987
Parallel pins, hardened (Dowel pins)
95.99
ISO 8734:1997
Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)
90.93
ISO 8735:1987
Parallel pins with internal thread, hardened
95.99
ISO 8735:1997
Parallel pins with internal thread, of hardened steel and martensitic stainless steel
90.93
ISO 8736:1986
Taper pins with internal thread, unhardened
90.93
ISO 8737:1986
Taper pins with external thread, unhardened
90.93
ISO 8738:1986
Plain washers for clevis pins — Product grade A
90.93
ISO 8739:1986
Grooved pins — Full-length parallel grooved, with pilot
95.99
ISO 8739:1997
Grooved pins — Full-length parallel grooved, with pilot
90.92
ISO/WD 8739
Grooved pins — Full-length parallel grooved, with pilot
20.20
ISO 8740:1986
Grooved pins — Full length parallel grooved, with chamfer
95.99
ISO 8740:1997
Grooved pins — Full-length parallel grooved, with chamfer
90.92
ISO/WD 8740
Grooved pins — Full-length parallel grooved, with chamfer
20.20
ISO 8741:1986
Grooved pins — Half-length reverse taper grooved
95.99
ISO 8741:1997
Grooved pins — Half-length reverse-taper grooved
90.92
ISO/WD 8741
Grooved pins — Half-length reverse-taper grooved
20.20
ISO 8742:1986
Grooved pins — Third-length centre grooved
95.99
ISO 8742:1997
Grooved pins — One-third-length centre grooved
90.92
ISO/WD 8742
Grooved pins — One-third-length centre grooved
20.20
ISO 8743:1986
Grooved pins — Half-length centre grooved
95.99
ISO 8743:1997
Grooved pins — Half-length centre grooved
90.92
ISO/WD 8743
Grooved pins — Half-length centre grooved
20.20
ISO 8744:1986
Grooved pins — Full-length taper grooved
95.99
ISO 8744:1997
Grooved pins — Full-length taper grooved
90.92
ISO/WD 8744
Grooved pins — Full-length taper grooved
20.20
ISO 8745:1986
Grooved pins — Half-length taper grooved
95.99
ISO 8745:1997
Grooved pins — Half-length taper grooved
90.92
ISO/WD 8745
Grooved pins — Half-length taper grooved
20.20
ISO 8746:1986
Grooved pins with round head
95.99
ISO 8746:1997
Grooved pins with round head
90.92
ISO/WD 8746
Grooved pins with round head
20.20
ISO 8747:1986
Grooved pins with countersunk head
95.99
ISO 8747:1997
Grooved pins with countersunk head
90.92
ISO/WD 8747
Grooved pins with countersunk head
20.20
ISO 8748:1987
Spring-type straight pins — Coiled, heavy duty
95.99
ISO 8748:1997
Spring-type straight pins — Coiled, heavy duty
95.99
ISO 8748:2007
Spring-type straight pins — Coiled, heavy duty
90.93
ISO 8749:1986
Pins and grooved pins — Shear test
90.93
ISO 8750:1987
Spring-type straight pins — Coiled, standard duty
95.99
ISO 8750:1997
Spring-type straight pins — Coiled, standard duty
95.99
ISO 8750:2007
Spring-type straight pins — Coiled, standard duty
90.93
ISO 8751:1987
Spring-type straight pins — Coiled, light duty
95.99
ISO 8751:1997
Spring-type straight pins — Coiled, light duty
95.99
ISO 8751:2007
Spring-type straight pins — Coiled, light duty
90.93
ISO 8752:1987
Spring-type straight pins, slotted
95.99
ISO 8752:1997
Spring-type straight pins — Slotted, heavy duty
95.99
ISO 8752:2009
Spring-type straight pins — Slotted, heavy duty
90.93
ISO 8765:1988
Hexagon head bolts with metric fine pitch thread — Product grades A and B
95.99
ISO 10642:1997
Hexagon socket countersunk head screws
95.99
ISO 10664:1999
Hexalobular internal driving feature for bolts and screws
95.99
ISO 10669:1999
Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A
90.93
ISO 13337:1997
Spring-type straight pins — Slotted, light duty
95.99
ISO 13337:2009
Spring-type straight pins — Slotted, light duty
90.93
ISO 14583:2001/Cor 1:2004
Hexalobular socket pan head screws — Technical Corrigendum 1
95.99
ISO 14588:2000
Blind rivets — Terminology and definitions
90.93
ISO 14589:2000
Blind rivets — Mechanical testing
90.93
ISO 15071:1999/Cor 1:2006
Hexagon bolts with flange — Small series — Product grade A — Technical Corrigendum 1
95.99
ISO 15973:2000
Closed end blind rivets with break pull mandrel and protruding head — AlA/St
90.93
ISO 15974:2000
Closed end blind rivets with break pull mandrel and countersunk head — AlA/St
90.93
ISO 15975:2002
Closed end blind rivets with break pull mandrel and protruding head — AI/AIA
90.93
ISO 15976:2002
Closed end blind rivets with break pull mandrel and protruding head — St/St
90.93
ISO 15977:2002
Open end blind rivets with break pull mandrel and protruding head — AIA/St
90.93
ISO 15978:2002
Open end blind rivets with break pull mandrel and countersunk head — AIA/St
90.93
ISO 15979:2002
Open end blind rivets with break pull mandrel and protruding head — St/St
90.93
ISO 15980:2002
Open end blind rivets with break pull mandrel and countersunk head — St/St
90.93
ISO 15981:2002
Open end blind rivets with break pull mandrel and protruding head — AIA/AIA
90.93
ISO 15982:2002
Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA
90.93
ISO 15983:2002
Open end blind rivets with break pull mandrel and protruding head — A2/A2
90.93
ISO 15984:2002
Open end blind rivets with break pull mandrel and countersunk head — A2/A2
90.93
ISO 16048:2003
Passivation of corrosion-resistant stainless-steel fasteners
90.92
ISO 16582:2002
Open end blind rivets with break pull mandrel and protruding head — Cu/St or Cu/Br or Cu/SSt
90.93
ISO 16583:2002
Open end blind rivets with break pull mandrel and countersunk head — Cu/St or Cu/Br or Cu/SSt
90.93
ISO 16584:2002
Open end blind rivets with break pull mandrel and protruding head — NiCu/St or NiCu/SSt
90.93
ISO 16585:2002
Closed end blind rivets with pull mandrel and protruding head — A2/SSt
90.93
ISO 21269:2004
Hexagon socket head cap screws with metric fine pitch thread
95.99

По запросу ничего не найдено