Каталог стандартов

83.080.20 - Thermoplastic materials

  • Фильтр:
  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO 174:1974 [Withdrawn]
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of viscosity number in dilute solution
95.99 ISO/TC 61
ISO/R 182:1970 [Withdrawn]
Plastics -- Determination of the thermal stability of polyvinyl chloride and related copolymers and their compounds by splitting off of hydrogen chloride
95.99 ISO/TC 61
ISO 182-1:1990
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 1: Congo red method
90.93 ISO/TC 61/SC 9
ISO 182-2:1990
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 2: pH method
90.93 ISO/TC 61/SC 9
ISO 182-3:1993
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 3: Conductometric method
90.93 ISO/TC 61/SC 9
ISO 182-4:1993
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 4: Potentiometric method
90.93 ISO/TC 61/SC 9
ISO 293:1974 [Withdrawn]
Plastics -- Compression moulding test specimens of thermoplastic materials
95.99 ISO/TC 61
ISO 293:1986 [Withdrawn]
Plastics -- Compression moulding test specimens of thermoplastic materials
95.99 ISO/TC 61/SC 9
ISO 293:2004
Plastics -- Compression moulding of test specimens of thermoplastic materials
90.93 ISO/TC 61/SC 9
ISO 294:1975 [Withdrawn]
Plastics -- Injection moulding test specimens of thermoplastic materials
95.99 ISO/TC 61
ISO 294:1995 [Withdrawn]
Plastics -- Injection moulding of test specimens of thermoplastic materials
95.99 ISO/TC 61/SC 9
ISO 294-1:1996 [Withdrawn]
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
ISO 294-1:1996/Amd 2:2005 [Withdrawn]
Methods of determining the hold pressure and hold time
95.99 ISO/TC 61/SC 9
ISO 294-1:2017
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens
60.60 ISO/TC 61/SC 9
ISO 294-2:1996 [Withdrawn]
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
ISO 294-2:2018
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
60.60 ISO/TC 61/SC 9
ISO 294-3:1996 [Withdrawn]
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
95.99 ISO/TC 61/SC 9
ISO 294-3:2002
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
90.92 ISO/TC 61/SC 9
60.60 ISO/TC 61/SC 9
ISO/DIS 294-3 [Under development]
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
40.60 ISO/TC 61/SC 9
ISO 294-4:1997 [Withdrawn]
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
95.99 ISO/TC 61/SC 9
ISO 294-4:2001 [Withdrawn]
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
ISO 294-4:2018
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
60.60 ISO/TC 61/SC 9
ISO 294-5:2001 [Withdrawn]
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
ISO 294-5:2011 [Withdrawn]
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
95.99 ISO/TC 61/SC 9
ISO 294-5:2017
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
60.60 ISO/TC 61/SC 9
ISO 305:1976 [Withdrawn]
Plastics -- Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compounds -- Discoloration method
95.99 ISO/TC 61
ISO 305:1990
Plastics -- Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds -- Discoloration method
90.92 ISO/TC 61/SC 9
ISO/FDIS 305 [Under development]
Plastics -- Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds -- Discoloration method
50.20 ISO/TC 61/SC 9
ISO 306:1974 [Withdrawn]
Plastics -- Determination of the Vicat softening temperature of thermoplastics
95.99 ISO/TC 61
ISO 306:1987 [Withdrawn]
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature
95.99 ISO/TC 61/SC 2
ISO 306:1994 [Withdrawn]
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
95.99 ISO/TC 61/SC 2
ISO 306:2004 [Withdrawn]
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
95.99 ISO/TC 61/SC 2
ISO 306:2013
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
90.60 ISO/TC 61/SC 2
ISO 307 [Under development]
Plastics -- Polyamides -- Determination of viscosity number
60.00 ISO/TC 61/SC 9
ISO 307:1977 [Withdrawn]
Plastics -- Determination of viscosity number of polyamides in dilute solution
95.99 ISO/TC 61
ISO 307:1984 [Withdrawn]
Plastics -- Polyamides -- Determination of viscosity number
95.99 ISO/TC 61/SC 9
ISO 307:1994 [Withdrawn]
Plastics -- Polyamides -- Determination of viscosity number
95.99 ISO/TC 61/SC 9
ISO 307:2003 [Withdrawn]
Plastics -- Polyamides -- Determination of viscosity number
95.99 ISO/TC 61/SC 9
ISO 307:2007
Plastics -- Polyamides -- Determination of viscosity number
90.92 ISO/TC 61/SC 9
ISO 307:2007/Amd 1:2013
Corrections, and update to reference to JIS K 6920-2
60.60 ISO/TC 61/SC 9
ISO 458-2:1985
Plastics -- Determination of stiffness in torsion of flexible materials -- Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
90.93 ISO/TC 61/SC 2
ISO 585:1982 [Withdrawn]
Plastics - Non-plasticized cellulose acetate - Determination of moisture content
95.99 ISO/TC 61
ISO 585:1990
Plastics -- Unplasticized cellulose acetate -- Determination of moisture content
90.93 ISO/TC 61/SC 9
ISO 599:1979 [Withdrawn]
Plastics -- Polyamides -- Determination of matter extractable by boiling methanol
95.99 ISO/TC 61
ISO 599:1985 [Withdrawn]
Plastics -- Polyamide homopolymers -- Determination of matter extractable by boiling methanol
95.99 ISO/TC 61/SC 9
ISO/R 872:1968 [Withdrawn]
Plastics -- Determination of ash of unplasticized cellulose acetate
95.99 ISO/TC 61
ISO 960:1988 [Withdrawn]
Plastics -- Polyamides (PA) -- Determination of water content
95.99 ISO/TC 61/SC 9
ISO/R 960:1969 [Withdrawn]
Plastics -- Determination of the water content in polyamides
95.99 ISO/TC 61
ISO 1060:1975 [Withdrawn]
Withdrawal of ISO 1060-1975
95.99 ISO/TC 61
ISO 1060-1:1982 [Withdrawn]
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 1060-1:1998
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifications
90.92 ISO/TC 61/SC 9
ISO 1060-2:1978 [Withdrawn]
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Determination of properties
95.99 ISO/TC 61
ISO 1060-2:1985 [Withdrawn]
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Determination of properties
95.99 ISO/TC 61/SC 9
ISO 1060-2:1998
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Preparation of test samples and determination of properties
90.92 ISO/TC 61/SC 9
ISO 1061:1975 [Withdrawn]
Plastics -- Unplasticized cellulose acetate -- Determination of free acidity
95.99 ISO/TC 61/SC 9
ISO 1061:1990
Plastics -- Unplasticized cellulose acetate -- Determination of free acidity
90.93 ISO/TC 61/SC 9
ISO 1068:1975
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of compacted apparent bulk density
90.60 ISO/TC 61/SC 9
ISO 1110:1975 [Withdrawn]
Plastics -- Polyamide 66, 610 and 6 -- Accelerated conditioning of test specimens
95.99 ISO/TC 61
ISO 1110:1987 [Withdrawn]
Plastics -- Polyamides -- Accelerated conditioning of test specimens
95.99 ISO/TC 61/SC 9
ISO 1110:1995
Plastics -- Polyamides -- Accelerated conditioning of test specimens
90.92 ISO/TC 61/SC 9
ISO/DIS 1110 [Under development]
Plastics -- Polyamides -- Accelerated conditioning of test specimens
40.99 ISO/TC 61/SC 9
ISO 1133:1991 [Withdrawn]
Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
95.99 ISO/TC 61/SC 5
ISO 1133:1997 [Withdrawn]
Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
95.99 ISO/TC 61/SC 5
ISO 1133:2005 [Withdrawn]
Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
95.99 ISO/TC 61/SC 5
95.99 ISO/TC 61/SC 5
ISO 1133-1:2011
Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 1: Standard method
90.93 ISO/TC 61/SC 5
ISO 1133-2:2011
Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 2: Method for materials sensitive to time-temperature history and/or moisture
90.93 ISO/TC 61/SC 5
ISO 1157:1975 [Withdrawn]
Plastics -- Cellulose acetate in dilute solution -- Determination of viscosity number and viscosity ratio
95.99 ISO/TC 61
ISO 1157:1990 [Withdrawn]
Plastics -- Cellulose acetate in dilute solution -- Determination of viscosity number and viscosity ratio
95.99 ISO/TC 61/SC 9
ISO 1158:1978 [Withdrawn]
Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine
95.99 ISO/TC 61
ISO 1158:1984 [Withdrawn]
Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine
95.99 ISO/TC 61/SC 9
ISO 1158:1998
Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content
90.60 ISO/TC 61/SC 9
ISO 1159:1978 [Withdrawn]
Plastics -- Vinyl chloride-vinyl acetate copolymers -- Determination of vinyl acetate
95.99 ISO/TC 61/SC 9
ISO 1163-1:1980 [Withdrawn]
Plastics -- Unplasticized compounds of homopolymers and copolymers of vinyl chloride -- Part 1: Designation
95.99 ISO/TC 61
ISO 1163-1:1985 [Withdrawn]
Plastics -- Unplasticized compounds of homopolymers and copolymers of vinyl chloride -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 1163-1:1995 [Withdrawn]
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 1163-2:1980 [Withdrawn]
Plastics -- Unplasticized compounds of homopolymers and copolymers of vinyl chloride -- Part 2: Determination of properties
95.99 ISO/TC 61/SC 9
ISO 1163-2:1995 [Withdrawn]
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 1191:1975 [Withdrawn]
Plastics -- Polyethylenes and polypropylenes in dilute solution -- Determination of viscosity number and of limiting viscosity number
95.99 ISO/TC 61
ISO 1218:1975 [Withdrawn]
Plastics -- Polyamides -- Determination of "melting point"
95.99 ISO/TC 61/SC 5
ISO 1228:1975 [Withdrawn]
Plastics -- Poly(ethylene terephthalate) in dilute solution -- Determination of viscosity number
95.99 ISO/TC 61/SC 9
ISO 1264:1980
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of pH of aqueous extract
90.93 ISO/TC 61/SC 9
ISO 1265:1979 [Withdrawn]
Plastics -- Polyvinyl chloride resins -- Determination of number of impurities and foreign particles
95.99 ISO/TC 61/SC 9
ISO 1265:2007
Plastics -- Poly(vinyl chloride) resins -- Determination of number of impurities and foreign particles
90.93 ISO/TC 61/SC 9
ISO 1269:1980 [Withdrawn]
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water)
95.99 ISO/TC 61/SC 9
ISO 1269:2006
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water)
90.20 ISO/TC 61/SC 9
ISO 1270:1975 [Withdrawn]
Plastics -- PVC resins -- Determination of ash and sulphated ash
95.99 ISO/TC 61
ISO 1597:1975 [Withdrawn]
Plastics -- Unplasticized cellulose acetate -- Determination of acetic acid yield
95.99 ISO/TC 61/SC 9
ISO 1597:1994 [Withdrawn]
Plastics -- Unplasticized cellulose acetate -- Determination of acetic acid yield
95.99 ISO/TC 61/SC 9
ISO 1598:1975 [Withdrawn]
Plastics -- Cellulose acetate -- Determination of insoluble particles
95.99 ISO/TC 61/SC 9
ISO 1598:1990
Plastics - Cellulose acetate -- Determination of insoluble particles
90.93 ISO/TC 61/SC 9
ISO/DIS 1598 [Deleted]
Plastics - Cellulose acetate -- Determination of insoluble particles
40.98 ISO/TC 61/SC 9
ISO 1599:1975 [Withdrawn]
Plastics -- Cellulose acetate -- Determination of viscosity loss on moulding
95.99 ISO/TC 61/SC 9
ISO 1599:1990
Plastics -- Cellulose acetate -- Determination of viscosity loss on moulding
90.93 ISO/TC 61/SC 9
ISO/DIS 1599 [Deleted]
Plastics -- Cellulose acetate -- Determination of viscosity loss on moulding
40.98 ISO/TC 61/SC 9
ISO 1600:1975 [Withdrawn]
Plastics -- Cellulose acetate -- Determination of light absorption before and after heating
95.99 ISO/TC 61/SC 9
ISO 1600:1990
Plastics -- Cellulose acetate -- Determination of light absorption on moulded specimens produced using different periods of heating
90.93 ISO/TC 61/SC 9
ISO 1622:1975 [Withdrawn]
Plastics -- Polystyrene moulding and extrusion materials -- Designation
95.99 ISO/TC 61/SC 9
ISO 1622-1:1985 [Withdrawn]
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 1622-1:1994 [Withdrawn]
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 1622-1:2012
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 ISO/TC 61/SC 9
ISO 1622-2:1980 [Withdrawn]
Plastics -- Polystyrene moulding and extrusion materials -- Part 2: Determination of properties
95.99 ISO/TC 61
ISO 1622-2:1995
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.92 ISO/TC 61/SC 9
ISO 1624:1978 [Withdrawn]
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis in water
95.99 ISO/TC 61/SC 9
ISO 1624:2001
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis in water
90.93 ISO/TC 61/SC 9
ISO 1628-2:1988 [Withdrawn]
Plastics -- Determination of viscosity number and limiting viscosity number -- Part 2: Poly(vinyl chloride) resins
95.99 ISO/TC 61/SC 9
ISO 1628-2:1998
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 2: Poly(vinyl chloride) resins
90.60 ISO/TC 61/SC 9
ISO 1628-3:1991 [Withdrawn]
Plastics -- Determination of viscosity number and limiting viscosity number -- Part 3: Polyethylenes and polypropylenes
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
ISO 1628-3:2001 [Withdrawn]
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 3: Polyethylenes and polypropylenes
95.99 ISO/TC 61/SC 9
ISO 1628-3:2010
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 3: Polyethylenes and polypropylenes
90.93 ISO/TC 61/SC 9
ISO 1628-4:1986 [Withdrawn]
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
95.99 ISO/TC 61/SC 9
ISO 1628-4:1999
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
90.93 ISO/TC 61/SC 9
ISO/DIS 1628-4 [Deleted]
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
40.98 ISO/TC 61/SC 9
ISO 1628-5:1986 [Withdrawn]
Plastics -- Determination of viscosity number and limiting viscosity number -- Part 5: Poly(alkylene terephthalates)
95.99 ISO/TC 61/SC 9
ISO 1628-6:1990
Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers
90.93 ISO/TC 61/SC 9
ISO 1872:1972 [Withdrawn]
Polyethylene thermoplastic materials -- Designation
95.99 ISO/TC 61/SC 9
ISO 1872-1:1986 [Withdrawn]
Plastics -- Polyethylene (PE) and ethylene copolymer thermoplastics -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 1872-1:1993 [Withdrawn]
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 1872-2:1989 [Withdrawn]
Plastics -- Polyethylene (PE) and ethylene copolymer thermoplastics -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 1872-2:1997 [Withdrawn]
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
ISO 1872-2:2007 [Withdrawn]
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 1873-1:1986 [Withdrawn]
Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 1873-1:1991 [Withdrawn]
Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 1873-1:1995 [Withdrawn]
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 1873-2:1989 [Withdrawn]
Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 1873-2:1997 [Withdrawn]
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
ISO 1873-2:2007 [Withdrawn]
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO/R 1874:1971 [Withdrawn]
Plastics -- Specification for polyamide homopolymers
95.99 ISO/TC 61
ISO 1874-1:1985 [Withdrawn]
Plastics -- Polyamide (PA) homopolymers for moulding and extrusion -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 1874-1:1992 [Withdrawn]
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 1874-1:2010 [Withdrawn]
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation system and basis for specification
95.99 ISO/TC 61/SC 9
ISO 1874-2:1987 [Withdrawn]
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 1874-2:1995 [Withdrawn]
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 1874-2:2006 [Withdrawn]
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 1874-2:2006/Amd 1:2010 [Withdrawn]
Laser sintering of specimens
95.99 ISO/TC 61/SC 9
ISO 1874-2:2012 [Withdrawn]
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 1875:1982
Plastics -- Plasticized cellulose acetate -- Determination of matter extractable by diethyl ether
90.60 ISO/TC 61/SC 9
ISO 2557-1:1976 [Withdrawn]
Plastics -- Amorphous thermoplastic moulding materials -- Preparation of test specimens with a defined level of shrinkage -- Part 1: Test specimens in the form of parallelepipedic bars (Injection moulding and compression moulding)
95.99 ISO/TC 61
ISO 2557-1:1989 [Withdrawn]
Plastics -- Amorphous thermoplastics -- Preparation of test specimens with a specified maximum reversion -- Part 1: Bars
95.99 ISO/TC 61/SC 9
ISO 2557-2:1979 [Withdrawn]
Plastics -- Amorphous thermoplastic moulding materials -- Preparation of test specimens with a defined level of shrinkage -- Part 2: Test specimens in the form of rectangular plates (Injection moulding)
95.99 ISO/TC 61/SC 9
ISO 2557-2:1986 [Withdrawn]
Plastics -- Amorphous thermoplastics -- Preparation of test specimens with a specified reversion -- Part 2: Plates
95.99 ISO/TC 61/SC 9
ISO 2561:1974 [Withdrawn]
Plastics -- Determination of residual styrene monomer in polystyrene by gas chromatography
95.99 ISO/TC 61/SC 5
ISO 2561:2006 [Withdrawn]
Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
95.99 ISO/TC 61/SC 9
ISO 2561:2012
Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
90.93 ISO/TC 61/SC 9
ISO 2577:1975 [Withdrawn]
Plastics -- Thermosetting moulding materials -- Determination of shrinkage of compression moulded test specimens in the form of bars
95.99 ISO/TC 61/SC 9
ISO 2580-1:1978 [Withdrawn]
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation
95.99 ISO/TC 61
ISO 2580-1:1990 [Withdrawn]
Plastics -- Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 2580-1:1997 [Withdrawn]
Plastics -- Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 2580-1:2000 [Withdrawn]
Plastics -- Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 2580-1:2002 [Withdrawn]
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 2580-2:1982 [Withdrawn]
Plastics -- Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials -- Part 2: Determination of properties
95.99 ISO/TC 61
ISO 2580-2:1994 [Withdrawn]
Plastics -- Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 2580-2:2003 [Withdrawn]
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 2897:1976 [Withdrawn]
Plastics -- Designation of impact-resistant polystyrenes
95.99 ISO/TC 61
ISO 2897-1:1990 [Withdrawn]
Plastics -- Impact-resistant polystyrene (SB) moulding and extrusion materials -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 2897-1:1997 [Withdrawn]
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 2897-2:1981 [Withdrawn]
Plastics -- Impact-resistant polystyrenes -- Part 2: Determination of properties
95.99 ISO/TC 61
ISO 2897-2:1994 [Withdrawn]
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
ISO 2897-2:2003
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.92 ISO/TC 61/SC 9
ISO 2898-1:1980 [Withdrawn]
Plastics -- Plasticized compounds of homopolymers and copolymers of vinyl chloride -- Part 1: Designation
95.99 ISO/TC 61
ISO 2898-1:1986 [Withdrawn]
Plastics -- Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P) -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 2898-1:1996
Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 ISO/TC 61/SC 9
ISO 2898-2:1980 [Withdrawn]
Plastics -- Plasticized compounds of homopolymers and copolymers of vinyl chloride -- Part 2: Determination of properties
95.99 ISO/TC 61
ISO 2898-2:1989 [Withdrawn]
Plastics -- Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P) -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 2898-2:1997 [Withdrawn]
Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 2898-2:2008
Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.92 ISO/TC 61/SC 9
ISO 3451-2:1984 [Withdrawn]
Plastics -- Determination of ash -- Part 2: Polyalkylene terephthalates
95.99 ISO/TC 61/SC 5
ISO 3451-2:1998
Plastics -- Determination of ash -- Part 2: Poly(alkylene terephthalate) materials
90.93 ISO/TC 61/SC 5
ISO 3451-3:1984
Plastics -- Determination of ash -- Part 3: Unplasticized cellulose acetate
90.93 ISO/TC 61/SC 5
ISO 3451-4:1986 [Withdrawn]
Plastics -- Determination of ash -- Part 4: Polyamides
95.99 ISO/TC 61/SC 5
ISO 3451-4:1998
Plastics -- Determination of ash -- Part 4: Polyamides
90.93 ISO/TC 61/SC 5
ISO 3451-5:1989 [Withdrawn]
Plastics -- Determination of ash -- Part 5: Poly(vinyl chloride)
95.99 ISO/TC 61/SC 5
ISO 3451-5:2002
Plastics -- Determination of ash -- Part 5: Poly(vinyl chloride)
90.93 ISO/TC 61/SC 5
ISO/TR 3485:1980 [Withdrawn]
Plastics -- Polypropylene granules -- Determination of thermal stability in air by pH method
95.99 ISO/TC 61/SC 6
ISO 3499:1976 [Withdrawn]
Plastics -- Aqueous dispersions of homopolymers and copolymers of vinyl acetate -- Determination of bromine number
95.99 ISO/TC 61/SC 9
ISO 4574:1978
Plastics -- PVC resins for general use -- Determination of hot plasticizer absorption
90.92 ISO/TC 61/SC 9
ISO/FDIS 4574 [Under development]
Plastics -- PVC resins for general use -- Determination of hot plasticizer absorption
50.20 ISO/TC 61/SC 9
ISO 4575:1978 [Withdrawn]
Plastics -- Polyvinyl chloride pastes -- Determination of apparent viscosity using the Severs rheometer
95.99 ISO/TC 61
ISO 4575:1985 [Withdrawn]
Plastics -- Polyvinyl chloride pastes -- Determination of apparent viscosity using the Severs rheometer
95.99 ISO/TC 61/SC 9
ISO 4575:2007
Plastics -- Poly(vinyl chloride) pastes -- Determination of apparent viscosity using the Severs rheometer
90.93 ISO/TC 61/SC 9
ISO 4576:1978 [Withdrawn]
Plastics -- Aqueous dispersions of homopolymers and copolymers -- Determination of gross particle content by sieve analysis
95.99 ISO/TC 61/SC 9
ISO 4577:1983
Plastics -- Polypropylene and propylene-copolymers -- Determination of thermal oxidative stability in air -- Oven method
90.92 ISO/TC 61/SC 9
ISO/FDIS 4577 [Under development]
Plastics -- Polypropylene and propylene-copolymers -- Determination of thermal oxidative stability in air -- Oven method
50.00 ISO/TC 61/SC 9
ISO 4581:1987 [Withdrawn]
Plastics -- Styrene/acrylonitrile copolymers -- Determination of residual acrylonitrile monomer content -- Gas chromatography method
95.99 ISO/TC 61/SC 5
ISO 4581:1994
Plastics -- Styrene/acrylonitrile copolymers -- Determination of residual acrylonitrile monomer content -- Gas chromatography method
90.93 ISO/TC 61/SC 5
ISO 4608:1977 [Withdrawn]
Plastics -- PVC resins for general use -- Determination of plasticizer absorption at room temperature
95.99 ISO/TC 61
ISO 4608:1984 [Withdrawn]
Plastics -- Homopolymer and copolymer resins of vinyl chloride for general use -- Determination of plasticizer absorption at room temperature
95.99 ISO/TC 61/SC 9
ISO 4608:1998
Plastics -- Homopolymer and copolymer resins of vinyl chloride for general use -- Determination of plasticizer absorption at room temperature
90.93 ISO/TC 61/SC 9
ISO 4610:1977 [Withdrawn]
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis using air-jet sieve apparatus
95.99 ISO/TC 61/SC 9
ISO 4610:2001
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis using air-jet sieve apparatus
90.93 ISO/TC 61/SC 9
ISO 4612:1979 [Withdrawn]
Plastics -- PVC paste resins -- Preparation of a paste
95.99 ISO/TC 61/SC 9
ISO 4612:1999 [Withdrawn]
Plastics -- Preparation of PVC pastes for test purposes -- Planetary-mixer method
95.99 ISO/TC 61/SC 9
ISO 4612:2018
Plastics -- Preparation of PVC pastes for test purposes -- Planetary-mixer method
60.60 ISO/TC 61/SC 9
ISO 4613-1:1985 [Withdrawn]
Plastics -- Ethylene/vinyl acetate copolymer thermoplastics (E/VAC) -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 4613-1:1993 [Withdrawn]
Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 1: Designation and specification
95.99 ISO/TC 61/SC 9
ISO 4613-2:1989 [Withdrawn]
Plastics -- Ethylene/vinyl acetate copolymer (E/VAC) thermoplastics -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 4613-2:1995 [Withdrawn]
Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
ISO/TR 4616:1980 [Withdrawn]
Plastics -- Determination of the thermal stability of polyvinyl chloride (PVC) -- Conductometric method
95.99 ISO/TC 61
ISO 4894-1:1979 [Withdrawn]
Plastics -- Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials -- Part 1: Designation
95.99 ISO/TC 61
ISO 4894-1:1990 [Withdrawn]
Plastics -- Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 4894-1:1997 [Withdrawn]
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 4894-2:1981 [Withdrawn]
Plastics -- Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials -- Part 2: Determination of properties
95.99 ISO/TC 61
ISO 4894-2:1995
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.92 ISO/TC 61/SC 9
ISO 6186:1980 [Withdrawn]
Plastics -- Determination of pourability
95.99 ISO/TC 61/SC 9
ISO 6186:1998
Plastics -- Determination of pourability
90.60 ISO/TC 61/SC 9
ISO 6188:1980 [Withdrawn]
Plastics -- Poly(ethylene terephthalate) granules -- Determination of water content
95.99 ISO/TC 61
ISO 6188:1986 [Withdrawn]
Plastics -- Poly(alkylene terephthalate) granules -- Determination of water content
95.99 ISO/TC 61/SC 9
ISO 6401:1985 [Withdrawn]
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer -- Gas chromatographic method
95.99 ISO/TC 61/SC 5
ISO 6401:2008
Plastics -- Poly(vinyl chloride) -- Determination of residual vinyl chloride monomer -- Gas-chromatographic method
90.93 ISO/TC 61/SC 5
ISO 6402-1:1990 [Withdrawn]
Plastics -- Impact-resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 6402-1:1997 [Withdrawn]
Plastics -- Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 6402-1:2001 [Withdrawn]
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 6402-1:2002 [Withdrawn]
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 6402-2:1994 [Withdrawn]
Plastics -- Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 6402-2:2003 [Withdrawn]
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 6691:1989 [Withdrawn]
Thermoplastics for plain bearings -- Classification and designation
95.99 ISO/TC 123/SC 2
ISO 6691:2000
Thermoplastic polymers for plain bearings -- Classification and designation
90.93 ISO/TC 123/SC 2
ISO 7391-1:1987 [Withdrawn]
Plastics -- Polycarbonate moulding and extrusion materials -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 7391-1:1996 [Withdrawn]
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 7391-1:2006 [Withdrawn]
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 7391-2:1986 [Withdrawn]
Plastics -- Polycarbonate moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 7391-2:1996 [Withdrawn]
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 7391-2:2006 [Withdrawn]
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 7792-1:1985 [Withdrawn]
Plastics -- Polyalkylene terephthalates -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 7792-1:1995 [Withdrawn]
Plastics -- Poly(alkylene terephthalate) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 7792-1:1997 [Withdrawn]
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 7792-1:2012 [Withdrawn]
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 7792-2:1988 [Withdrawn]
Plastics -- Polyalkylene terephthalates -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 7792-2:1997 [Withdrawn]
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 7792-2:2012 [Withdrawn]
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 8257-1:1987 [Withdrawn]
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 8257-1:1998
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 ISO/TC 61/SC 9
ISO 8257-2:1990 [Withdrawn]
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 8257-2:2001
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.92 ISO/TC 61/SC 9
ISO 8328:1989 [Withdrawn]
Plastics -- Amorphous thermoplastic moulding materials -- Determination of maximum reversion
95.99 ISO/TC 61/SC 9
ISO 8985:1989 [Withdrawn]
Plastics -- Ethylene/vinyl acetate copolymer (E/VAC) thermoplastics -- Determination of vinyl acetate content
95.99 ISO/TC 61/SC 9
ISO 8985:1998
Plastics -- Ethylene/vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content
90.60 ISO/TC 61/SC 9
ISO 8986-1:1993 [Withdrawn]
Plastics -- Polybutene (PB) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 8986-1:2009
Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 ISO/TC 61/SC 9
ISO 8986-2:1995 [Withdrawn]
Plastics -- Polybutene (PB) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
ISO 8986-2:2009
Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.92 ISO/TC 61/SC 9
ISO 9113:1986
Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Determination of isotactic index
90.92 ISO/TC 61/SC 9
ISO/FDIS 9113 [Under development]
Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Determination of isotactic index
50.00 ISO/TC 61/SC 9
ISO 9988-1:1991 [Withdrawn]
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 1: Designation
95.99 ISO/TC 61/SC 9
ISO 9988-1:1998 [Withdrawn]
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 9988-1:2004 [Withdrawn]
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 9988-2:1991 [Withdrawn]
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 9988-2:1999 [Withdrawn]
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 9988-2:2006 [Withdrawn]
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 10350-1:1998 [Withdrawn]
Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials
95.99 ISO/TC 61/SC 2
ISO 10350-1:2007 [Withdrawn]
Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials
95.99 ISO/TC 61/SC 2
95.99 ISO/TC 61/SC 2
ISO 10350-1:2017
Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials
60.60 ISO/TC 61/SC 2
ISO 10366-1:1993 [Withdrawn]
Plastics -- Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 10366-1:2002 [Withdrawn]
Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 10366-2:1994 [Withdrawn]
Plastics -- Methyl methacrylate/ acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 10366-2:2003
Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.92 ISO/TC 61/SC 9
ISO 11337:2004 [Withdrawn]
Plastics -- Polyamides -- Determination of e-caprolactam and w-laurolactam by gas chromatography
95.99 ISO/TC 61/SC 5
95.99 ISO/TC 61/SC 5
ISO 11337:2010
Plastics -- Polyamides -- Determination of e-caprolactam and w-laurolactam by gas chromatography
90.93 ISO/TC 61/SC 5
ISO 11468:1997
Plastics -- Preparation of PVC pastes for test purposes -- Dissolver method
90.93 ISO/TC 61/SC 9
ISO 11542-1:1994 [Withdrawn]
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
95.99 ISO/TC 61/SC 9
ISO 11542-1:2001 [Withdrawn]
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 11542-2:1998
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.92 ISO/TC 61/SC 9
60.60 ISO/TC 61/SC 9
ISO 12000:2000 [Withdrawn]
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods
95.99 ISO/TC 61/SC 9
ISO 12000:2014
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods
90.20 ISO/TC 61/SC 9
ISO 12086-1:1995 [Withdrawn]
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 12086-1:2006 [Withdrawn]
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
60.60 ISO/TC 61/SC 9
ISO 12086-2:1995 [Withdrawn]
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 12086-2:2006 [Withdrawn]
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
60.60 ISO/TC 61/SC 9
ISO 12418-1:2012
Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 9
ISO 12418-2:2012
Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 9
ISO 14446:1999
Binders for paints and varnishes -- Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
90.93 ISO/TC 35
ISO 14663-1:1999 [Withdrawn]
Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 14663-2:1999 [Withdrawn]
Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 14910-1:1997 [Withdrawn]
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 14910-1:2013 [Withdrawn]
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specification
95.99 ISO/TC 61/SC 9
ISO 14910-2:1997 [Withdrawn]
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 14910-2:2013 [Withdrawn]
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 15023-1:2001 [Withdrawn]
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 15023-1:2017
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO 15023-2:2003 [Withdrawn]
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 2: Determination of properties
95.99 ISO/TC 61/SC 9
ISO 15023-2:2019
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 2: Determination of properties
60.60 ISO/TC 61/SC 9
ISO 15103-1:2000 [Withdrawn]
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 15103-2:2000 [Withdrawn]
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 15103-2:2007 [Withdrawn]
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 15373:2001
Plastics -- Polymer dispersions -- Determination of free formaldehyde
90.93 ISO/TC 61/SC 9
ISO 15526-1:2000 [Withdrawn]
Plastics -- Polyketone (PK) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 15526-2:2000 [Withdrawn]
Plastics -- Polyketone (PK) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 15853:1999
Thermoplastics materials -- Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
90.93 ISO/TC 138/SC 5
ISO 16365-1:2014
Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 1: Designation system and basis for specifications
90.20 ISO/TC 61/SC 9
ISO 16365-2:2014
Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties
90.20 ISO/TC 61/SC 9
ISO 16365-3:2014
Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 3: Distinction between ether and ester polyurethanes by determination of the ester group content
90.20 ISO/TC 61/SC 9
ISO 16396-1:2015
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation system, marking of products and basis for specifications
60.60 ISO/TC 61/SC 9
ISO 16396-2:2017
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.92 ISO/TC 61/SC 9
ISO/DIS 16396-2 [Under development]
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.99 ISO/TC 61/SC 9
ISO 16770:2004
Plastics -- Determination of environmental stress cracking (ESC) of polyethylene -- Full-notch creep test (FNCT)
90.92 ISO/TC 61/SC 9
ISO/DIS 16770 [Under development]
Plastics -- Determination of environmental stress cracking (ESC) of polyethylene -- Full-notch creep test (FNCT)
40.99 ISO/TC 61/SC 9
ISO 16790:2005
Plastics -- Determination of drawing characteristics of thermoplastics in the molten state
90.20 ISO/TC 61/SC 5
ISO 17855-1:2014
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.20 ISO/TC 61/SC 9
ISO 17855-2:2016
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO 18064:2003 [Withdrawn]
Thermoplastic elastomers -- Nomenclature and abbreviated terms
95.99 ISO/TC 45
ISO 18064:2014
Thermoplastic elastomers -- Nomenclature and abbreviated terms
90.20 ISO/TC 45
ISO 18263-1:2015
Plastics -- Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging -- Part 1: Designation system and basis for specification
60.60 ISO/TC 61/SC 9
ISO 18263-2:2015
Plastics -- Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO 19062-1:2015
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO 19062-2:2019
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO 19063-1:2015
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO/DIS 19063-2 [Under development]
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.20 ISO/TC 61/SC 9
ISO 19064-1:2015
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO/DIS 19064-2 [Under development]
Plastics -- Styrene-acrylonitrile (SAN) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.20 ISO/TC 61/SC 9
ISO 19065-1:2014
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.20 ISO/TC 61/SC 9
ISO 19065-2:2019
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO 19066-1:2014
Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.20 ISO/TC 61/SC 9
ISO/DIS 19066-2 [Under development]
Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.20 ISO/TC 61/SC 9
ISO 19069-1:2015
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO 19069-2:2016
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO 19892:2011
Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of joints to pressure cycling
90.93 ISO/TC 138/SC 5
ISO 20028-1:2017
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 ISO/TC 61/SC 9
ISO/DIS 20028-1 [Under development]
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
40.99 ISO/TC 61/SC 9
ISO 20028-2:2017
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO 20029-1:2017
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specification
60.60 ISO/TC 61/SC 9
ISO 20029-2:2017
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO 20557-1:2018
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO 20557-2:2018
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimen and determination of properties
60.60 ISO/TC 61/SC 9
ISO 20558-1:2018
Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO 20558-2:2018
Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 2: Preparation of test specimen and determination of properties
60.60 ISO/TC 61/SC 9
ISO 20568-1:2017
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO 20568-2:2017
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO 21301-1:2019
Plastics -- Ethylene-vinyl acetate (EVAC) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO 21301-2:2019
Plastics -- Ethylene-vinyl acetate (EVAC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO/FDIS 21302-1 [Under development]
Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
50.20 ISO/TC 61/SC 9
ISO/FDIS 21302-2 [Under development]
Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
50.20 ISO/TC 61/SC 9
ISO 21304-1:2019
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO/DIS 21304-2 [Under development]
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.20 ISO/TC 61/SC 9
ISO 21305-1:2019
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1: Designation system and basis for specification
60.60 ISO/TC 61/SC 9
ISO 21305-2:2019
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO 21306-1:2019
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO 21306-2:2019
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO 21309-1:2019
Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications
60.60 ISO/TC 61/SC 9
ISO 21309-2:2019
Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9
ISO 21970-1:2018
Plastics -- Polyketone (PK) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 ISO/TC 61/SC 9
ISO/FDIS 21970-1 [Under development]
Plastics -- Polyketone (PK) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
50.00 ISO/TC 61/SC 9
ISO 21970-2:2018
Plastics -- Polyketone (PK) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.92 ISO/TC 61/SC 9
ISO/FDIS 21970-2 [Under development]
Plastics -- Polyketone (PK) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
50.00 ISO/TC 61/SC 9
ISO 22498:2005
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Particle size determination by mechanical sieving
90.60 ISO/TC 61/SC 9
ISO/DIS 23153-1 [Under development]
Plastics -- Polyetheretherketone (PEEK) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
40.20 ISO/TC 61/SC 9
ISO/DIS 23153-2 [Under development]
Plastics -- Polyetheretherketone (PEEK) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.20 ISO/TC 61/SC 9
ISO/DIS 24022-1 [Under development]
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
40.20 ISO/TC 61/SC 9
ISO/DIS 24022-2 [Under development]
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.20 ISO/TC 61/SC 9
ISO/DIS 24023-1 [Under development]
Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
40.20 ISO/TC 61/SC 9
ISO/DIS 24023-2 [Under development]
Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.20 ISO/TC 61/SC 9
ISO/DIS 24024-1 [Under development]
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifications
40.20 ISO/TC 61/SC 9
ISO/DIS 24024-2 [Under development]
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Preparation of test samples and determination of properties
40.20 ISO/TC 61/SC 9
ISO/DIS 24025-1 [Under development]
Plastics -- Sulfone polymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications
40.20 ISO/TC 61/SC 9
ISO/DIS 24025-2 [Under development]
Plastics -- Sulfone polymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.20 ISO/TC 61/SC 9
ISO/DIS 24026-1 [Under development]
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
40.00 ISO/TC 61/SC 9
ISO/DIS 24026-2 [Under development]
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
40.00 ISO/TC 61/SC 9
ISO 24538:2008
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
90.93 ISO/TC 61/SC 5
ISO 25137-1:2009
Plastics -- Sulfone polymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 ISO/TC 61/SC 9
ISO 25137-2:2009
Plastics -- Sulfone polymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
90.92 ISO/TC 61/SC 9
ISO 27547-1:2010
Plastics -- Preparation of test specimens of thermoplastic materials using mouldless technologies -- Part 1: General principles, and laser sintering of test specimens
90.93 ISO/TC 261
ISO 28078-1:2009 [Withdrawn]
Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
95.99 ISO/TC 61/SC 9
ISO 28078-2:2009 [Withdrawn]
Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 9
ISO 28941-1:2008
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 ISO/TC 61/SC 9
ISO 29988-1:2018
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
90.92 ISO/TC 61/SC 9
ISO/DIS 29988-1 [Under development]
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
40.99 ISO/TC 61/SC 9
ISO 29988-2:2018
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
60.60 ISO/TC 61/SC 9

По запросу ничего не найдено