• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO/DATA 5:1978
Title missing
95.99 ISO/TC 138
ISO/DATA 6:1974
Title missing
95.99 ISO/TC 138
ISO/DATA 7:1979
Title missing
95.99 ISO/TC 138
ISO/DATA 8:1979
Title missing
95.99 ISO/TC 138
ISO 161-1:1978
Thermoplastics pipes for the transport of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series
95.99 ISO/TC 138
ISO 161-1:1996
Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series
95.99 ISO/TC 138
ISO 161-1:2018
Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series
60.60 ISO/TC 138
ISO 161-2:1977
Thermoplastic pipes for the transport of fluids -- Nominal outside diameters and nominal pressures -- Part 2: Inch series
95.99 ISO/TC 138
ISO 161-2:1996
Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 2: Inch-based series
90.93 ISO/TC 138
ISO 265-1:1988
Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
90.93 ISO/TC 138/SC 1
ISO/R 1164:1970
Withdrawal of ISO/R 1164-1970
95.99 ISO/TC 138
ISO/R 1165:1970
Withdrawal of ISO/R 1165-1970
95.99 ISO/TC 138
ISO/R 1166:1970
Withdrawal of ISO/R 1166-1970
95.99 ISO/TC 138
ISO 1167:1973
Plastics pipes for the transport of fluids -- Determination of the resistance to internal pressure
95.99 ISO/TC 138
ISO 1167:1996
Thermoplastics pipes for the conveyance of fluids -- Resistance to internal pressure -- Test method
95.99 ISO/TC 138/SC 5
95.99 ISO/TC 138/SC 5
ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method
90.93 ISO/TC 138/SC 5
ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces
90.20 ISO/TC 138/SC 5
ISO 1167-3:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components
90.93 ISO/TC 138/SC 5
ISO 1167-4:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies
90.93 ISO/TC 138/SC 5
ISO/R 1330:1970
Withdrawal of ISO/R 1330-1970
95.99 ISO/TC 138
ISO 1452-1:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General
90.20 ISO/TC 138/SC 2
ISO 1452-2:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes
90.20 ISO/TC 138/SC 2
ISO 1452-3:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings
90.20 ISO/TC 138/SC 2
ISO 1452-4:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves
90.20 ISO/TC 138/SC 2
ISO 1452-5:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system
90.20 ISO/TC 138/SC 2
ISO 1746:1998
Rubber or plastics hoses and tubing -- Bending tests
95.99 ISO/TC 45/SC 1
95.99 ISO/TC 45/SC 1
ISO 2056:1976
Withdrawal of ISO 2056-1976
95.99 ISO/TC 138
ISO 2505:1981
Unplasticized polyvinyl chloride (PVC) pipes -- Longitudinal reversion -- Test methods and specification
95.99 ISO/TC 138/SC 5
ISO 2505:2005
Thermoplastics pipes -- Longitudinal reversion -- Test method and parameters
90.93 ISO/TC 138/SC 5
ISO 2505-1:1994
Thermoplastics pipes -- Longitudinal reversion -- Part 1: Determination methods
95.99 ISO/TC 138/SC 5
ISO 2505-2:1994
Thermoplastics pipes -- Longitudinal reversion -- Part 2: Determination parameters
95.99 ISO/TC 138/SC 5
95.99 ISO/TC 138/SC 5
ISO 2506:1981
Polyethylene pipes (PE) -- Longitudinal reversion -- Test methods and specification
95.99 ISO/TC 138/SC 5
ISO 2507:1982
Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Vicat softening temperature -- Test method and specification
95.99 ISO/TC 138/SC 5
ISO 2507-1:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method
90.93 ISO/TC 138/SC 5
ISO 2507-2:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
90.93 ISO/TC 138/SC 5
ISO 2507-3:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
90.93 ISO/TC 138/SC 5
ISO 2508:1981
Unplasticized polyvinyl chloride (PVC) pipes -- Water absorption -- Determination and specification
95.99 ISO/TC 138/SC 5
ISO 3114:1977
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -- Test method
90.93 ISO/TC 138/SC 5
ISO 3126:1974
Plastics pipes -- Measurement of dimensions
95.99 ISO/TC 138/SC 5
ISO 3126:2005
Plastics piping systems -- Plastics components -- Determination of dimensions
90.93 ISO/TC 138/SC 5
ISO 3127:1980
Unplasticized polyvinyl chloride (PVC) pipes for the transport of fluids -- Determination and specification of resistance to external blows
95.99 ISO/TC 138
ISO 3127:1994
Thermoplastics pipes -- Determination of resistance to external blows -- Round-the-clock method
90.93 ISO/TC 138/SC 5
ISO 3212:1975
Polypropylene pipes -- Burst test requirements
95.99 ISO/TC 138/SC 5
ISO 3213:1975
Polypropylene pipes -- Reduction of permissible stress as a function of time and temperature
95.99 ISO/TC 138
ISO 3213:1996
Polypropylene (PP) pipes -- Effect of time and temperature on expected strength
95.99 ISO/TC 138/SC 5
ISO 3213:2009
Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength
90.93 ISO/TC 138/SC 5
ISO 3472:1975
Unplasticized polyvinyl chloride (PVC) pipes -- Specification and determination of resistance to acetone
95.99 ISO/TC 138/SC 5
ISO 3473:1977
Unplasticized polyvinyl chloride (PVC) pipes -- Effect of sulphuric acid -- Requirement and test method
95.99 ISO/TC 138/SC 5
ISO 3474:1976
Unplasticized polyvinyl chloride (PVC) pipes -- Specification and measurement of opacity
95.99 ISO/TC 138/SC 5
ISO 3477:1981
Polypropylene (PP) pipes and fittings -- Density -- Determination and specification
95.99 ISO/TC 138/SC 5
ISO 3478:1975
Polypropylene (PP) pipes -- Determination of longitudinal reversion
95.99 ISO/TC 138
ISO 3480:1976
Polypropylene (PP) pipes -- Maximum permissible longitudinal reversion
95.99 ISO/TC 138/SC 5
ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density
90.93 ISO/TC 138/SC 5
ISO 3606:1976
Unplasticized polyvinyl chloride (PVC) pipes -- Tolerances on outside diameters and wall thicknesses
95.99 ISO/TC 138
ISO 3607:1977
Polyethylene (PE) pipes -- Tolerances on outside diameters and wall thicknesses
95.99 ISO/TC 138
ISO 3608:1976
Chlorinated polyvinyl chloride (CPVC) pipes -- Tolerances on outside diameters and wall thicknesses
95.99 ISO/TC 138
ISO 3609:1977
Polypropylene (PP) pipes -- Tolerances on outside diameters and wall thicknesses
95.99 ISO/TC 138
ISO 3633:2002
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Unplasticized poly(vinyl chloride) (PVC-U)
90.93 ISO/TC 138/SC 1
ISO 4056:1978
Polyethylene (PE) pipes and fittings -- Designation of polyethylene, based on nominal density and melt flow index
95.99 ISO/TC 138
ISO 4059:1978
Polyethylene (PE) pipes -- Pressure drop in mechanical pipe-jointing systems -- Method of test and requirements
90.20 ISO/TC 138/SC 5
ISO 4065:1978
Thermoplastic pipes -- Universal wall thickness table
95.99 ISO/TC 138
ISO 4065:1996
Thermoplastics pipes -- Universal wall thickness table
95.99 ISO/TC 138
ISO 4065:2018
Thermoplastics pipes -- Universal wall thickness table
60.60 ISO/TC 138
ISO/TR 4191:1989
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply -- Recommended practice for laying
95.99 ISO/TC 138/SC 2
ISO/TR 4191:2014
Plastics piping systems for water supply -- Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) -- Guidance for installation
60.60 ISO/TC 138/SC 2
ISO 4422-1:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 1: General
95.99 ISO/TC 138/SC 2
ISO 4422-2:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 2: Pipes (with or without integral sockets)
95.99 ISO/TC 138/SC 2
ISO 4422-3:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 3: Fittings and joints
95.99 ISO/TC 138/SC 2
ISO 4422-4:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 4: Valves and ancillary equipment
95.99 ISO/TC 138/SC 2
ISO 4422-5:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 4427:1996
Polyethylene (PE) pipes for water supply -- Specifications
95.99 ISO/TC 138/SC 2
ISO 4427-1:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General
95.99 ISO/TC 138/SC 2
ISO 4427-1:2007/Amd 1:2015
Melt mass-flow rate (MFR) for PE 80 and PE 100
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO 4427-1:2019
Plastics piping systems for water supply and for drainage and sewerage under pressure -- Polyethylene (PE) -- Part 1: General
60.60 ISO/TC 138/SC 2
ISO 4427-2:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 2: Pipes
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO 4427-2:2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure -- Polyethylene (PE) -- Part 2: Pipes
60.60 ISO/TC 138/SC 2
ISO 4427-5:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 4427-5:2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure -- Polyethylene (PE) -- Part 5: Fitness for purpose of the system
60.60 ISO/TC 138/SC 2
ISO 4433:1984
Polyolefin pipes -- Resistance to chemical fluids -- Immersion test method -- System for preliminary classification
95.99 ISO/TC 138/SC 3
ISO 4433-1:1997
Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 1: Immersion test method
90.93 ISO/TC 138/SC 3
ISO 4433-2:1997
Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 2: Polyolefin pipes
90.93 ISO/TC 138/SC 3
ISO 4433-3:1997
Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes
90.93 ISO/TC 138/SC 3
ISO 4433-4:1997
Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 4: Poly(vinylidene fluoride) (PVDF) pipes
90.93 ISO/TC 138/SC 3
ISO 4435:2003
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U)
90.93 ISO/TC 138/SC 1
ISO 4439:1979
Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density
90.93 ISO/TC 138/SC 5
ISO 4440:1980
Polyethylene (PE) pipes and fittings -- Determination of melt flow rate
95.99 ISO/TC 138
ISO 4440-1:1994
Thermoplastics pipes and fittings -- Determination of melt mass-flow rate -- Part 1: Test method
95.99 ISO/TC 138/SC 5
ISO 4440-2:1994
Thermoplastics pipes and fittings -- Determination of melt mass-flow rate -- Part 2: Test conditions
95.99 ISO/TC 138/SC 5
ISO 4451:1980
Polyethylene (PE) pipes and fittings -- Determination of reference density of uncoloured and black polyethylenes
95.99 ISO/TC 138/SC 5
ISO 6259-1:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method
95.99 ISO/TC 138/SC 5
ISO 6259-1:2015
Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method
60.60 ISO/TC 138/SC 5
ISO 6259-2:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
90.92 ISO/TC 138/SC 5
ISO/DIS 6259-2
Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
40.20 ISO/TC 138/SC 5
ISO 6259-3:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes
95.99 ISO/TC 138/SC 5
ISO 6259-3:2015
Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes
60.60 ISO/TC 138/SC 5
ISO/TR 6285:1980
Pipes and fittings of acrylonitrile/butadiene/ styrene terpolymer (ABS) -- Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO 6964:1986
Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method and basic specification
95.99 ISO/TC 138/SC 5
ISO 6964:2019
Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method
60.60 ISO/TC 138/SC 5
ISO 6992:1986
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply -- Extractability of cadmium and mercury occurring as impurities
95.99 ISO/TC 138/SC 5
ISO/NP TR 7024
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Thermoplastics -- Recommended practice for installation
10.99 ISO/TC 138/SC 1
ISO/TR 7024:1985
Above-ground drainage -- Recommended practice and techniques for the installation of unplasticized polyvinyl chloride (PVC-U) sanitary pipework for above-ground systems inside buildings
95.99 ISO/TC 138/SC 1
ISO/TS 7024:2005
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Thermoplastics -- Recommended practice for installation
90.92 ISO/TC 138/SC 1
ISO/TR 7073:1988
Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers
95.99 ISO/TC 138/SC 1
ISO/TR 7074:1986
Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
95.99 ISO/TC 138/SC 1
ISO 7245:1984
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials
90.93 ISO/TC 138/SC 5
ISO 7246:1984
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials
90.93 ISO/TC 138/SC 5
ISO 7370:1983
Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings -- Nominal diameters, specified diameters and standard lengths
95.99 ISO/TC 138/SC 6
ISO 7432:2002
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
95.99 ISO/TC 138/SC 6
ISO 7432:2018
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
90.92 ISO/TC 138/SC 6
ISO/NP 7432
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
10.99 ISO/TC 138/SC 6
ISO/TR 7471:1981
Polypropylene (PP) pipes and fittings -- Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO/TR 7472:1981
Low density polyethylene pipes and fittings -- Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO/TR 7473:1981
Unplasticized polyvinyl chloride pipes and fittings -- Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO/TR 7474:1981
High density polyethylene pipes and fittings -- Chemical resistance with respect to fluids to be conveyed
95.99 ISO/TC 138
ISO 7509:2000
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure
95.99 ISO/TC 138/SC 6
ISO 7509:2015
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure
60.60 ISO/TC 138/SC 6
ISO 7510:1997
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method
95.99 ISO/TC 138/SC 6
ISO 7510:2017
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents
60.60 ISO/TC 138/SC 6
ISO 7511:1999
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure
90.93 ISO/TC 138/SC 6
ISO 7671:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polypropylene (PP)
90.20 ISO/TC 138/SC 1
ISO 7675:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Chlorinated poly(vinyl chloride) (PVC-C)
90.93 ISO/TC 138/SC 1
ISO 7676:1990
Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane test
95.99 ISO/TC 138/SC 5
ISO 7682:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Acrylonitrile-butadiene-styrene (ABS)
90.20 ISO/TC 138/SC 1
ISO 7684:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions
90.60 ISO/TC 138/SC 6
ISO 7685:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
95.99 ISO/TC 138/SC 6
ISO 7685:2019
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial ring stiffness
60.60 ISO/TC 138/SC 6
ISO 7686:1992
Plastics pipes and fittings -- Opacity -- Test method
95.99 ISO/TC 138/SC 5
ISO 7686:2005
Plastics pipes and fittings -- Determination of opacity
90.93 ISO/TC 138/SC 5
ISO 8283-1:1991
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
90.93 ISO/TC 138/SC 1
ISO 8283-2:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 2: Polyethylene (PE)
90.20 ISO/TC 138/SC 1
ISO 8283-3:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 3: Polypropylene (PP)
90.20 ISO/TC 138/SC 1
ISO 8283-4:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS)
90.60 ISO/TC 138/SC 1
ISO 8361-1:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method
90.93 ISO/TC 138/SC 5
ISO 8361-2:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
90.93 ISO/TC 138/SC 5
ISO 8361-3:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
90.93 ISO/TC 138/SC 5
ISO 8483:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints
95.99 ISO/TC 138/SC 6
95.99 ISO/TC 138/SC 6
ISO 8483:2019
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints
60.60 ISO/TC 138/SC 6
ISO 8513:2000
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of longitudinal tensile properties
95.99 ISO/TC 138/SC 6
ISO 8513:2014
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial longitudinal tensile strength
95.99 ISO/TC 138/SC 6
ISO 8513:2016
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the initial longitudinal tensile strength
60.60 ISO/TC 138/SC 6
ISO 8521:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the apparent initial circumferential tensile strength
95.99 ISO/TC 138/SC 6
ISO 8521:2009
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial circumferential tensile strength
90.92 ISO/TC 138/SC 6
ISO/DIS 8521
Glass-reinforced thermosetting plastic (GRP) pipes -- Test methods for the determination of the initial circumferential tensile wall strength
40.20 ISO/TC 138/SC 6
ISO 8533:2003
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of cemented or wrapped joints
95.99 ISO/TC 138/SC 6
95.99 ISO/TC 138/SC 6
ISO 8533:2019
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped joints
60.60 ISO/TC 138/SC 6
ISO 8584-1:1990
Thermoplastics pipes for industrial applications under pressure -- Determination of the chemical resistance factor and of the basic stress -- Part 1: Polyolefin pipes
95.99 ISO/TC 138/SC 3
ISO/TR 8584-2:1993
Thermoplastics pipes for industrial applications under pressure -- Determination of the chemical resistance factor and of the basic stress -- Part 2: Pipes made of halogenated polymers
95.99 ISO/TC 138/SC 3
ISO 8770:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polyethylene (PE)
90.20 ISO/TC 138/SC 1
ISO 8772:1991
High-density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems -- Specifications
95.99 ISO/TC 138/SC 1
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE)
90.93 ISO/TC 138/SC 1
ISO 8773:1991
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems -- Specifications
95.99 ISO/TC 138/SC 1
ISO 8773:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP)
90.93 ISO/TC 138/SC 1
ISO 8779:2001
Polyethylene (PE) pipes for irrigation laterals -- Specifications
95.99 ISO/TC 138/SC 2
ISO 8779:2010
Plastics piping systems -- Polyethylene (PE) pipes for irrigation -- Specifications
90.92 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO/FDIS 8779
Plastics piping systems -- Polyethylene (PE) pipes for irrigation -- Specifications
50.92 ISO/TC 138/SC 2
ISO 8795:1998
Plastics piping systems for the conveyance of water intended for human consumption -- Migration assessment -- Determination of migration values for plastics pipes
95.99 ISO/TC 138/SC 5
ISO 8795:2001
Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints
90.93 ISO/TC 138/SC 5
ISO 8796:2004
Polyethylene PE 32 and PE 40 pipes for irrigation laterals -- Susceptibility to environmental stress cracking induced by insert-type fittings -- Test method and requirements
90.93 ISO/TC 138/SC 2
ISO 9080:2003
Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
95.99 ISO/TC 138/SC 5
ISO 9080:2012
Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
90.93 ISO/TC 138/SC 5
ISO/TR 9080:1992
Thermoplastics pipes for the transport of fluids -- Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
95.99 ISO/TC 138/SC 5
95.99 ISO/TC 138/SC 5
ISO 9852:1995
Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane resistance at specified temperature (DCMT) -- Test method
95.99 ISO/TC 138/SC 5
ISO 9852:2007
Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane resistance at specified temperature (DCMT) -- Test method
90.93 ISO/TC 138/SC 5
ISO 9854-1:1994
Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 1: General test method
90.92 ISO/TC 138/SC 5
ISO 9854-2:1994
Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 2: Test conditions for pipes of various materials
90.92 ISO/TC 138/SC 5
ISO 9896:1996
Plastics traps for discharge pipework systems inside buildings
90.93 ISO/TC 138/SC 1
ISO 9967:1994
Thermoplastics pipes -- Determination of creep ratio
95.99 ISO/TC 138/SC 5
ISO 9967:2007
Thermoplastics pipes -- Determination of creep ratio
95.99 ISO/TC 138/SC 5
ISO 9967:2016
Thermoplastics pipes -- Determination of creep ratio
60.60 ISO/TC 138/SC 5
ISO 9969:1994
Thermoplastics pipes -- Determination of ring stiffness
95.99 ISO/TC 138/SC 5
ISO 9969:2007
Thermoplastics pipes -- Determination of ring stiffness
95.99 ISO/TC 138/SC 5
ISO 9969:2016
Thermoplastics pipes -- Determination of ring stiffness
60.60 ISO/TC 138/SC 5
ISO 10146:1997
Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength
95.99 ISO/TC 138/SC 5
ISO 10146:2019
Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) -- Effect of time and temperature on expected strength
60.60 ISO/TC 138/SC 5
ISO 10147:1994
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content
95.99 ISO/TC 138/SC 5
ISO 10147:2004
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content
95.99 ISO/TC 138/SC 5
95.99 ISO/TC 138/SC 5
ISO 10147:2011
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content
90.93 ISO/TC 138/SC 5
ISO/TR 10358:1993
Plastics pipes and fittings -- Combined chemical-resistance classification table
90.92 ISO/TC 138/SC 3
ISO 10466:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection
90.60 ISO/TC 138/SC 6
ISO 10467:2004
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
95.99 ISO/TC 138/SC 6
95.99 ISO/TC 138/SC 6
ISO 10467:2018
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
60.60 ISO/TC 138/SC 6
ISO 10468:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor
95.99 ISO/TC 138/SC 6
95.99 ISO/TC 138/SC 6
ISO 10468:2018
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the ring creep properties under wet or dry conditions
60.60 ISO/TC 138/SC 6
ISO 10471:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
95.99 ISO/TC 138/SC 6
95.99 ISO/TC 138/SC 6
ISO 10471:2018
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
60.60 ISO/TC 138/SC 6
ISO/TR 10501:1993
Thermoplastics pipes for the transport of liquids under pressure -- Calculation of head losses
90.93 ISO/TC 138/SC 2
ISO 10508:1995
Thermoplastics pipes and fittings for hot and cold water systems
95.99 ISO/TC 138/SC 2
ISO 10508:2006
Plastics piping systems for hot and cold water installations -- Guidance for classification and design
90.20 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 10639:2004
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
95.99 ISO/TC 138/SC 6
95.99 ISO/TC 138/SC 6
ISO 10639:2017
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
60.60 ISO/TC 138/SC 6
ISO 10928:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use
95.99 ISO/TC 138/SC 6
ISO 10928:2009
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use
95.99 ISO/TC 138/SC 6
95.99 ISO/TC 138/SC 6
ISO 10928:2016
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use
60.60 ISO/TC 138/SC 6
ISO 10931-2:1997
Plastics piping systems for industrial applications -- Poly(vinylidene fluoride) (PVDF) -- Part 2: Pipes
95.99 ISO/TC 138/SC 3
ISO 10952:1999
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack from the inside of a section in a deflected condition
95.99 ISO/TC 138/SC 6
ISO 10952:2008
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition
95.99 ISO/TC 138/SC 6
ISO 10952:2014
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition
90.60 ISO/TC 138/SC 6
ISO 11173:1994
Thermoplastics pipes -- Determination of resistance to external blows -- Staircase method
90.93 ISO/TC 138/SC 5
ISO 11296-1:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11296-3:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
95.99 ISO/TC 138/SC 8
ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO 11296-4:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-place pipes
95.99 ISO/TC 138/SC 8
ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-place pipes
60.60 ISO/TC 138/SC 8
ISO 11296-7:2011
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes
95.99 ISO/TC 138/SC 8
ISO 11296-7:2019
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes
60.60 ISO/TC 138/SC 8
ISO 11297-1:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11297-3:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 4: Lining with cured-in-place pipes
60.60 ISO/TC 138/SC 8
ISO 11298-1:2010
Plastics piping systems for renovation of underground water supply networks -- Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks -- Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks -- Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11298-3:2010
Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO/DIS 11298-4
Plastics piping systems for renovation of underground water supply networks -- Part 4: Lining with cured-in-place pipes
40.20 ISO/TC 138/SC 8
ISO 11299-1:2011
Plastics piping systems for renovation of underground gas supply networks -- Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11299-1:2018
Plastics piping systems for renovation of underground gas supply networks -- Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks -- Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11299-3:2011
Plastics piping systems for renovation of underground gas supply networks -- Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11299-3:2018
Plastics piping systems for renovation of underground gas supply networks -- Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO 11420:1996
Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds
95.99 ISO/TC 138/SC 5
ISO/TS 11619:2014
Polyurethane tubing for use primarily in pneumatic installations -- Dimensions and specification
90.93 ISO/TC 131/SC 4
ISO/TR 11647:1996
Fusion compatibility of polyethylene (PE) pipes and fittings
95.99 ISO/TC 138/SC 5
ISO 11673:2005
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes -- Determination of the fracture toughness properties
90.93 ISO/TC 138/SC 5
ISO 11922-1:1997
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series
95.99 ISO/TC 138
ISO 11922-1:2018
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series
60.60 ISO/TC 138
ISO 11922-2:1997
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 2: Inch-based series
90.93 ISO/TC 138
ISO 12091:1995
Structured-wall thermoplastics pipes -- Oven test
90.93 ISO/TC 138/SC 5
ISO 12092:2000
Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure -- Resistance to internal pressure -- Test method
95.99 ISO/TC 138/SC 5
ISO 12162:1995
Thermoplastics materials for pipes and fittings for pressure applications -- Classification and designation -- Overall service (design) coefficient
95.99 ISO/TC 138/SC 5
ISO 12162:2009
Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient
90.93 ISO/TC 138/SC 5
ISO 12176-1:1998
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
ISO 12176-1:2006
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
ISO 12176-1:2012
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
ISO 12176-1:2017
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion
60.60 ISO/TC 138/SC 4
ISO 12176-2:2000
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion
95.99 ISO/TC 138/SC 4
ISO 12176-2:2008
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion
90.93 ISO/TC 138/SC 4
ISO 12176-3:2001
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge
95.99 ISO/TC 138/SC 4
ISO 12176-3:2006
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge
95.99 ISO/TC 138/SC 4
ISO 12176-3:2011
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge
90.93 ISO/TC 138/SC 4
ISO 12176-4:2003
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 4: Traceability coding
90.93 ISO/TC 138/SC 4
ISO/DIS 12176-5
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems
40.60 ISO/TC 138/SC 4
ISO 12230:1996
Polybutene (PB) pipes -- Effect of time and temperature on the expected strength
95.99 ISO/TC 138/SC 5
ISO 12230:2012
Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength
90.93 ISO/TC 138/SC 5
ISO/TS 12512:2017
Glass reinforced thermosetting plastic (GRP) pipes -- Determination of initial specific ring stiffness using segment test species cut from a pipe
60.60 ISO/TC 138/SC 6
ISO 13229:2010
Thermoplastics piping systems for non-pressure applications -- Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings -- Determination of the viscosity number and K-value
90.93 ISO/TC 138/SC 1
ISO 13254:2010
Thermoplastics piping systems for non-pressure applications -- Test method for watertightness
90.93 ISO/TC 138/SC 1
ISO 13255:2010
Thermoplastics piping systems for soil and waste discharge inside buildings -- Test method for airtightness of joints
90.93 ISO/TC 138/SC 1
ISO 13257:2010
Thermoplastics piping systems for non-pressure applications -- Test method for resistance to elevated temperature cycling
95.99 ISO/TC 138/SC 1
ISO 13257:2018
Thermoplastics piping systems for non-pressure applications -- Test method for resistance to elevated temperature cycling
60.60 ISO/TC 138/SC 1
ISO 13259:2010
Thermoplastics piping systems for underground non-pressure applications -- Test method for leaktightness of elastomeric sealing ring type joints
95.99 ISO/TC 138/SC 1
ISO 13259:2018
Thermoplastics piping systems for underground non-pressure applications -- Test method for leaktightness of elastomeric sealing ring type joints
60.60 ISO/TC 138/SC 1
ISO 13260:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading
90.93 ISO/TC 138/SC 1
60.60 ISO/TC 138/SC 1
ISO 13262:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam
90.93 ISO/TC 138/SC 1
ISO 13263:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength
90.93 ISO/TC 138/SC 1
ISO 13264:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings
90.93 ISO/TC 138/SC 1
ISO 13265:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
90.93 ISO/TC 138/SC 1
ISO 13266:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading
90.93 ISO/TC 138/SC 1
ISO 13267:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test methods for buckling resistance
90.93 ISO/TC 138/SC 1
ISO 13268:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness
90.93 ISO/TC 138/SC 1
ISO 13272:2011
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations
90.93 ISO/TC 138/SC 1
ISO 13477:1997
Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Small-scale steady-state test (S4 test)
95.99 ISO/TC 138/SC 5
ISO 13477:2008
Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Small-scale steady-state test (S4 test)
90.93 ISO/TC 138/SC 5
ISO 13478:1997
Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Full-scale test (FST)
95.99 ISO/TC 138/SC 5
ISO 13478:2007
Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Full-scale test (FST)
90.93 ISO/TC 138/SC 5
ISO 13479:1997
Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes (notch test)
95.99 ISO/TC 138/SC 5
ISO 13479:2009
Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes
90.92 ISO/TC 138/SC 5
ISO/CD 13479
Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes
30.99 ISO/TC 138/SC 5
ISO 13480:1997
Polyethylene pipes -- Resistance to slow crack growth -- Cone test method
90.93 ISO/TC 138/SC 5
ISO 13760:1998
Plastics pipes for the conveyance of fluids under pressure -- Miner's rule -- Calculation method for cumulative damage
90.93 ISO/TC 138/SC 5
ISO 13761:1996
Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
95.99 ISO/TC 138/SC 5
ISO 13761:2017
Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
60.60 ISO/TC 138/SC 5
ISO 13844:2000
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure
95.99 ISO/TC 138/SC 2
ISO 13844:2015
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes -- Test method for leaktightness under negative pressure, angular deflection and deformation
60.60 ISO/TC 138/SC 5
ISO 13845:2000
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection
95.99 ISO/TC 138/SC 2
ISO 13845:2015
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes -- Test method for leaktightness under internal pressure and with angular deflection
60.60 ISO/TC 138/SC 5
ISO 13949:1997
Method for the assessment of the degree of pigment dispersion in polyolefin pipes, fittings and compounds
95.99 ISO/TC 138/SC 5
ISO 13950:2007
Plastics pipes and fittings -- Automatic recognition systems for electrofusion joints
90.93 ISO/TC 138/SC 4
60.60 ISO/TC 138/SC 4
ISO/TR 13950:1997
Plastics pipes and fittings -- Automatic recognition systems for electrofusion
95.99 ISO/TC 138/SC 4
ISO 13966:1998
Thermoplastics pipes and fittings -- Nominal ring stiffnesses
90.93 ISO/TC 138
ISO 13968:1997
Plastics piping and ducting systems -- Thermoplastics pipes -- Determination of ring flexibility
95.99 ISO/TC 138/SC 5
ISO 13968:2008
Plastics piping and ducting systems -- Thermoplastics pipes -- Determination of ring flexibility
90.93 ISO/TC 138/SC 5
ISO 14236:2000
Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
95.99 ISO/TC 138/SC 2
ISO 14531-1:2002
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes
90.93 ISO/TC 138/SC 4
ISO 14531-2:2004
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing
90.93 ISO/TC 138/SC 4
ISO 14531-3:2006
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
95.99 ISO/TC 138/SC 4
ISO 14531-3:2010
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
90.93 ISO/TC 138/SC 4
ISO 14531-4:2006
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 4: System design and installation guidelines
90.93 ISO/TC 138/SC 4
ISO 14828:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
95.99 ISO/TC 138/SC 6
95.99 ISO/TC 138/SC 6
ISO 15306:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure
90.93 ISO/TC 138/SC 6
60.60 ISO/TC 138/SC 6
ISO 15439-1:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 1: General
95.99 ISO/TC 138/SC 4
ISO 15439-2:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 2: Pipes
95.99 ISO/TC 138/SC 4
ISO 15439-3:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 3: Fittings
95.99 ISO/TC 138/SC 4
ISO 15874-1:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO 15874-1:2013
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General
90.93 ISO/TC 138/SC 2
ISO 15874-2:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO 15874-2:2013
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 15874-5:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 15874-5:2013
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 15875-2:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 2: Pipes
90.20 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 15875-5:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 5: Fitness for purpose of the system
90.20 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO/TS 15875-7:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 15875-7:2018
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 7: Guidance for the assessment of conformity
60.60 ISO/TC 138/SC 2
ISO 15876-2:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 2: Pipes
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO 15876-2:2017
Plastics piping systems for hot and cold water installations -- Polybutene (PB) -- Part 2: Pipes
60.60 ISO/TC 138/SC 2
ISO 15876-5:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 15876-5:2017
Plastics piping systems for hot and cold water installations -- Polybutene (PB) -- Part 5: Fitness for purpose of the system
60.60 ISO/TC 138/SC 2
ISO/TS 15876-7:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 15876-7:2018
Plastics piping systems for hot and cold water installations -- Polybutene (PB) -- Part 7: Guidance for the assessment of conformity
60.60 ISO/TC 138/SC 2
ISO 15877-1:2003
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General
95.99 ISO/TC 138/SC 2
ISO 15877-1:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General
90.20 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 15877-2:2003
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 2: Pipes
95.99 ISO/TC 138/SC 2
ISO 15877-2:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 2: Pipes
90.20 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 15877-5:2003
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 15877-5:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 5: Fitness for purpose of the system
90.20 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO/TS 15877-7:2003
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 15877-7:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 15877-7:2018
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity
60.60 ISO/TC 138/SC 2
ISO 16241:2005
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
90.20 ISO/TC 138/SC 5
ISO 16422:2006
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications
95.99 ISO/TC 138/SC 2
ISO 16422:2014
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications
90.20 ISO/TC 138/SC 2
ISO/TS 16479:2012
Thermoplastics pipes for the conveyance of fluids -- Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
90.93 ISO/TC 138/SC 5
ISO 16611:2017
Plastics piping systems for drainage and sewerage without pressure -- Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) -- Dimensions, requirements and tests
60.60 ISO/TC 138/SC 6
ISO 16871:2003
Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for exposure to direct (natural) weathering
90.93 ISO/TC 138/SC 5
ISO/TR 16913:1999
Plastics pipes and fittings -- Definitions of types of test
90.93 ISO/TC 138/SC 5
ISO/PRF TS 16943
Thermoplastic pipes for the conveyance of fluids -- Inspection of polyethylene electrofusion socket joints using the phased array ultrasonic testing method
50.00 ISO/TC 138/SC 5
ISO 17454:2006
Plastics piping systems -- Multilayer pipes -- Test method for the adhesion of the different layers using a pulling rig
90.93 ISO/TC 138/SC 5
ISO 17455:2005
Plastics piping systems -- Multilayer pipes -- Determination of the oxygen permeability of the barrier pipe
90.93 ISO/TC 138/SC 5
60.60 ISO/TC 138/SC 5
ISO 17456:2006
Plastics piping systems -- Multilayer pipes -- Determination of long-term strength
90.93 ISO/TC 138/SC 5
ISO 17467-1:2012
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 1: General
95.99 ISO/TC 138/SC 4
ISO 17467-2:2012
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 2: Pipes
95.99 ISO/TC 138/SC 4
ISO 17467-3:2012
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 3: Fittings
95.99 ISO/TC 138/SC 4
ISO 17484-1:2006
Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems
95.99 ISO/TC 138/SC 4
95.99 ISO/TC 138/SC 4
ISO 17484-1:2014
Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems
90.20 ISO/TC 138/SC 4
ISO 17484-2:2009
Plastics piping systems -- Multilayer pipe systems for indoor gas installations -- Part 2: Code of pratice
90.20 ISO/TC 138/SC 4
ISO 17778:2015
Plastics piping systems -- Fittings, valves and ancillaries -- Determination of gaseous flow rate/pressure drop relationships
90.92 ISO/TC 138/SC 5
ISO/TS 17902:2016
Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
60.60 ISO/TC 138/SC 1
ISO/TR 18124:2006
Plastics piping systems -- Multilayer M (metal) pipes -- Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
90.93 ISO/TC 138/SC 5
ISO 18225:2007
Plastics piping systems -- Multilayer piping systems for outdoor gas installations -- Specifications for systems
95.99 ISO/TC 138/SC 4
ISO 18225:2012
Plastics piping systems -- Multilayer piping systems for outdoor gas installations -- Specifications for systems
90.93 ISO/TC 138/SC 4
ISO/TS 18226:2006
Plastics pipes and fittings -- Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
90.93 ISO/TC 138/SC 4
ISO 18373-1:2007
Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 1: Measurement of the processing temperature
90.93 ISO/TC 138/SC 5
ISO 18373-2:2008
Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 2: Measurement of the enthalpy of fusion of crystallites
90.93 ISO/TC 138/SC 5
ISO 18488:2015
Polyethylene (PE) materials for piping systems -- Determination of Strain Hardening Modulus in relation to slow crack growth -- Test method
60.60 ISO/TC 138/SC 5
ISO 18489:2015
Polyethylene (PE) materials for piping systems -- Determination of resistance to slow crack growth under cyclic loading -- Cracked Round Bar test method
60.60 ISO/TC 138/SC 5
ISO 18553:2002
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
90.92 ISO/TC 138/SC 5
60.60 ISO/TC 138/SC 5
ISO 18672-1:2009
Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints
90.93 ISO/TC 138/SC 6
ISO 18851:2015
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test method to prove the structural design of fittings
60.60 ISO/TC 138/SC 6
ISO 19220:2004
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Styrene copolymer blends (SAN + PVC)
90.93 ISO/TC 138/SC 1
ISO/DIS 19469-1.2
Plastic piping systems for non pressure underground drainage - Single wall corrugated piping systems of polyethylene (PE) and polypropylene (PP) -- Part 1: General requirements and performance characteristics
40.98 ISO/TC 138/SC 1
ISO/DIS 19469-3.2
Plastic piping systems for non pressure underground drainage - Single wall corrugated piping systems of polyethylene (PE) and polypropylene (PP) -- Part 3: Pipes and fittings
40.98 ISO/TC 138/SC 1
ISO/TR 19480:2005
Polyethylene pipes and fittings for the supply of gaseous fuels or water -- Training and assessment of fusion operators
90.93 ISO/TC 138/SC 4
ISO 19893:2011
Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of mounted assemblies to temperature cycling
90.93 ISO/TC 138/SC 5
ISO 19899:2010
Plastics piping systems -- Polyolefin pipes and mechanical fitting assemblies -- Test method for the resistance to end load (AREL test)
90.93 ISO/TC 138/SC 5
ISO/TS 20656-1:2017
Plastics piping systems -- General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes -- Part 1: Buried pipes
60.60 ISO/TC 138/SC 6
ISO 21003-2:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 2: Pipes
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO/TS 21003-7:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
95.99 ISO/TC 138/SC 2
ISO/TS 21003-7:2019
Multilayer piping systems for hot and cold water installations inside buildings -- Part 7: Guidance for the assessment of conformity
60.60 ISO/TC 138/SC 2
ISO 21004:2006
Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply
90.93 ISO/TC 138/SC 2
ISO 21138-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system
90.92 ISO/TC 138/SC 1
ISO/DIS 21138-1
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specification and performance criteria for pipes, fittings and the system
40.99 ISO/TC 138/SC 1
ISO 21138-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A
90.92 ISO/TC 138/SC 1
ISO/DIS 21138-2.2
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A
40.99 ISO/TC 138/SC 1
ISO 21138-3:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B
90.92 ISO/TC 138/SC 1
ISO/DIS 21138-3.2
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B
40.99 ISO/TC 138/SC 1
ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks -- Part 1: Replacement on the line by pipe bursting and pipe extraction
60.60 ISO/TC 138/SC 8
ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks -- Part 2: Replacement off the line by horizontal directional drilling and impact moling
60.60 ISO/TC 138/SC 8
ISO 21307:2009
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
95.99 ISO/TC 138/SC 4
ISO 21307:2011
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
95.99 ISO/TC 138/SC 4
ISO 21307:2017
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) piping systems
60.60 ISO/TC 138/SC 4
40.99 ISO/TC 138/SC 4
ISO 21751:2011
Plastics pipes and fittings -- Decohesion test of electrofusion assemblies -- Strip-bend test
90.93 ISO/TC 138/SC 5
ISO 22391-2:2007
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes
95.99 ISO/TC 138/SC 2
ISO 22391-2:2009
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes
90.20 ISO/TC 138/SC 2
ISO/PRF TS 22499
Thermoplastic pipes for the conveyance of fluids -- Inspection of polyethylene butt fusion joints using phased array ultrasonic testing
50.20 ISO/TC 138/SC 5
ISO 23228:2011
Thermoplastics pipes for the conveyance of fluids -- Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
90.93 ISO/TC 138/SC 5
ISO/DTS 23818-1
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines -- Part 1: Polyethylene (PE) material
30.60 ISO/TC 138/SC 8
ISO/DIS 23856
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
40.20 ISO/TC 138/SC 6
ISO 24033:2006
Pipes made of raised-temperature-resistance polyethylene (PE-RT) -- Effect of time and temperature on the expected strength
95.99 ISO/TC 138/SC 5
ISO 24033:2009
Polyethylene of raised temperature resistance (PE-RT) pipes -- Effect of time and temperature on the expected strength
90.20 ISO/TC 138/SC 5
ISO 25780:2011
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques
90.92 ISO/TC 138/SC 6
ISO/TS 26873:2010
Plastics pipes and fittings -- Definition and construction procedures for reference lines
90.93 ISO/TC 138/SC 5
ISO/TR 27165:2012
Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
90.93 ISO/TC 138/SC 2

По запросу ничего не найдено