• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO 15:1981
Rolling bearings -- Radial bearings -- Boundary dimensions -- General plan
95.99 ISO/TC 4
ISO 15:1981/Add 1:1985
Diameter series 7 (d greater than or equal to 12 mm and less than or equal to 30 mm)
95.99 ISO/TC 4
ISO 15:1998
Rolling bearings -- Radial bearings -- Boundary dimensions, general plan
95.99 ISO/TC 4
ISO 15:2011
Rolling bearings -- Radial bearings -- Boundary dimensions, general plan
95.99 ISO/TC 4
ISO 15:2017
Rolling bearings -- Radial bearings -- Boundary dimensions, general plan
60.60 ISO/TC 4
ISO/R 15-1:1968
Withdrawal of ISO/R 15/1-1968
95.99 ISO/TC 4
ISO/R 15-2:1970
Withdrawal of ISO/R 15/2-1970
95.99 ISO/TC 4
ISO 76:1978
Rolling bearings -- Static load ratings
95.99 ISO/TC 4
ISO 76:1987
Rolling bearings -- Static load ratings
95.99 ISO/TC 4/SC 8
ISO 76:1987/Amd 1:1999
Annex A (informative) -- Discontinuities in the calculation of basic static load ratings
95.99 ISO/TC 4/SC 8
ISO 76:2006
Rolling bearings -- Static load ratings
90.93 ISO/TC 4/SC 8
60.60 ISO/TC 4/SC 8
ISO 104:1979
Rolling bearings -- Thrust bearings with flat back faces -- Boundary dimensions
95.99 ISO/TC 4
ISO 104:1994
Rolling bearings -- Thrust bearings -- Boundary dimensions, general plan
95.99 ISO/TC 4
ISO 104:2002
Rolling bearings -- Thrust bearings -- Boundary dimensions, general plan
95.99 ISO/TC 4
ISO 104:2015
Rolling bearings -- Thrust bearings -- Boundary dimensions, general plan
60.60 ISO/TC 4
ISO 113:1994
Rolling bearings -- Plummer block housings -- Boundary dimensions
95.99 ISO/TC 4
ISO 113:1999
Rolling bearings -- Plummer block housings -- Boundary dimensions
95.99 ISO/TC 4
ISO 113:2010
Rolling bearings -- Plummer block housings -- Boundary dimensions
90.93 ISO/TC 4
ISO 113-1:1979
Rolling bearing accessories -- Part 1: Tapered sleeves
95.99 ISO/TC 4
ISO 113-2:1979
Rolling bearing accessories -- Part 2: Plummer block housings
95.99 ISO/TC 4
ISO 199:1979
Rolling bearings -- Thrust ball bearings -- Tolerances
95.99 ISO/TC 4/SC 4
ISO 199:1997
Rolling bearings -- Thrust bearings -- Tolerances
95.99 ISO/TC 4/SC 4
ISO 199:2005
Rolling bearings -- Thrust bearings -- Tolerances
95.99 ISO/TC 4/SC 4
ISO 199:2014
Rolling bearings -- Thrust bearings -- Geometrical product specification (GPS) and tolerance values
90.20 ISO/TC 4/SC 4
ISO/R 199-1:1961
Withdrawal of ISO/R 199-1961
95.99 ISO/TC 4
ISO/R 199-2:1968
Withdrawal of ISO/R 199-1968
95.99 ISO/TC 4
ISO/R 200:1961
Withdrawal of ISO/R 200-1961
95.99 ISO/TC 4
ISO/R 201:1961
Withdrawal of ISO/R 201-1961
95.99 ISO/TC 4
ISO 246:1978
Cylindrical roller bearings -- Separate thrust collars -- Boundary dimensions
95.99 ISO/TC 4
ISO 246:1995
Rolling bearings -- Cylindrical roller bearings, separate thrust collars -- Boundary dimensions
95.99 ISO/TC 4
ISO 246:2007
Rolling bearings -- Cylindrical roller bearings, separate thrust collars -- Boundary dimensions
90.93 ISO/TC 4/SC 5
ISO 281:1990
Rolling bearings -- Dynamic load ratings and rating life
95.99 ISO/TC 4/SC 8
95.99 ISO/TC 4/SC 8
ISO 281:1990/Amd 2:2000
Life modification factor aXYZ
95.99 ISO/TC 4/SC 8
ISO 281:2007
Rolling bearings -- Dynamic load ratings and rating life
90.93 ISO/TC 4/SC 8
ISO 281-1:1977
Rolling bearings -- Dynamic load ratings and rating life -- Part 1: Calculation methods
95.99 ISO/TC 4
ISO/R 300-1:1963
Withdrawal of ISO/R 300/I-1963
95.99 ISO/TC 4
ISO/R 300-2:1965
Withdrawal of ISO/R 300/II-1965
95.99 ISO/TC 4
ISO/R 300-3:1968
Withdrawal of ISO/R 300/III-1968
95.99 ISO/TC 4
ISO 355:1977
Rolling bearings -- Metric tapered roller bearings -- Boundary dimensions and series designations
95.99 ISO/TC 4/SC 9
95.99 ISO/TC 4/SC 9
95.99 ISO/TC 4/SC 9
ISO 355:2007
Rolling bearings -- Tapered roller bearings -- Boundary dimensions and series designations
95.99 ISO/TC 4/SC 9
95.99 ISO/TC 4/SC 9
ISO 355:2019
Rolling bearings -- Tapered roller bearings -- Boundary dimensions and series designations
60.60 ISO/TC 4/SC 9
ISO/R 355-1:1963
Withdrawal of ISO/R 355/1-1963
95.99 ISO/TC 4
ISO/R 355-2:1965
Withdrawal of ISO/R 355/2-1965
95.99 ISO/TC 4
ISO/R 355-3:1967
Withdrawal of ISO/R 355/3-1967
95.99 ISO/TC 4
ISO/R 355-4:1968
Withdrawal of ISO/R 355/4-1968
95.99 ISO/TC 4
ISO/R 355-5:1970
Withdrawal of ISO/R 355/5-1969
95.99 ISO/TC 4
ISO/R 355-6:1970
Withdrawal of ISO/R 355/6-1970
95.99 ISO/TC 4
ISO/R 355-7:1970
Withdrawal of ISO/R 355/7-1970
95.99 ISO/TC 4
ISO/R 355-8:1973
Withdrawal of ISO/R 355/8-1973
95.99 ISO/TC 4
ISO 464:1976
Rolling bearings with locating snap ring -- Dimensions
95.99 ISO/TC 4
ISO 464:1995
Rolling bearings -- Radial bearings with locating snap ring -- Dimensions and tolerances
95.99 ISO/TC 4/SC 4
ISO 464:2015
Rolling bearings -- Radial bearings with locating snap ring -- Dimensions, geometrical product specifications (GPS) and tolerance values
60.60 ISO/TC 4/SC 4
ISO/R 465:1965
Withdrawal of ISO/R 465-1965
95.99 ISO/TC 4
ISO 492:1981
Radial bearings -- Tolerances
95.99 ISO/TC 4
ISO 492:1986
Rolling bearings -- Radial bearings -- Tolerances
95.99 ISO/TC 4/SC 4
ISO 492:1994
Rolling bearings -- Radial bearings -- Tolerances
95.99 ISO/TC 4/SC 4
ISO 492:2002
Rolling bearings -- Radial bearings -- Tolerances
95.99 ISO/TC 4/SC 4
ISO 492:2014
Rolling bearings -- Radial bearings -- Geometrical product specifications (GPS) and tolerance values
60.60 ISO/TC 4/SC 4
ISO/CD 492
Rolling bearings -- Radial bearings -- Geometrical product specifications (GPS) and tolerance values
30.98 ISO/TC 4/SC 4
ISO/R 533:1966
Withdrawal of ISO/R 533-1966
95.99 ISO/TC 4
ISO/R 577-1:1967
Withdrawal of ISO/R 577/1-1967
95.99 ISO/TC 4
ISO/R 577-2:1968
Withdrawal of ISO/R 477/2-1968
95.99 ISO/TC 4
ISO 577-3:1973
Withdrawal of ISO 477/3-1973
95.99 ISO/TC 4
ISO 578:1973
Rolling bearings -- Tapered roller bearings -- Inch series -- Tolerance classes 4 (normal tolerances), 3, 0 and 00
95.99 ISO/TC 4
ISO 578:1987
Tapered roller bearings -- Inch series -- Tolerances
95.99 ISO/TC 4
ISO 582:1979
Rolling bearings -- Metric series -- Chamfer dimension limits
95.99 ISO/TC 4
ISO 582:1995
Rolling bearings -- Chamfer dimensions -- Maximum values
90.93 ISO/TC 4/SC 4
60.60 ISO/TC 4/SC 4
ISO 683-17:1976
Heat-treated steels, alloy steels and free-cutting steels -- Part 17: Ball and roller bearing steels
95.99 ISO/TC 17/SC 4
ISO/R 1038:1969
Withdrawal of ISO/R 1038-1969
95.99 ISO/TC 4
ISO 1123:1976
Tapered roller bearings -- Inch series -- Chamfer dimension limits
95.99 ISO/TC 4
ISO 1132:1980
Rolling bearings -- Tolerances -- Definitions
95.99 ISO/TC 4
ISO 1132-1:2000
Rolling bearings -- Tolerances -- Part 1: Terms and definitions
90.93 ISO/TC 4/SC 4
ISO 1132-2:2001
Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods
90.93 ISO/TC 4/SC 4
ISO/DIS 1132-2
Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods
40.98 ISO/TC 4/SC 4
ISO 1160:1976
Rolling bearings for railway axle-boxes -- Acceptance inspection
95.99 ISO/TC 4
ISO 1206:1982
Needle roller bearings -- Light and medium series -- Dimensions and tolerances
95.99 ISO/TC 4
ISO 1206:2001
Rolling bearings -- Needle roller bearings, dimension series 48, 49 and 69 -- Boundary dimensions and tolerances
95.99 ISO/TC 4/SC 5
ISO 1206:2001/Amd 1:2013
Tolerances for shaft raceway
95.99 ISO/TC 4/SC 5
ISO 1206:2018
Rolling bearings -- Needle roller bearings with machined rings -- Boundary dimensions, geometrical product specifications (GPS) and tolerance values
60.60 ISO/TC 4/SC 5
ISO 1224:1984
Rolling bearings -- Instrument precision bearings
95.99 ISO/TC 4
ISO/R 1224:1971
Rolling bearings -- Instrument precision bearings
95.99 ISO/TC 4
ISO 1224-1:2007
Rolling bearings -- Instrument precision bearings -- Part 1: Boundary dimensions, tolerances and characteristics of metric series bearings
95.99 ISO/TC 4/SC 4
ISO 1224-2:2007
Rolling bearings -- Instrument precision bearings -- Part 2: Boundary dimensions, tolerances and characteristics of inch series bearings
95.99 ISO/TC 4/SC 4
ISO/DTR 1281-1
Rolling bearings -- Explanatory notes on ISO 281 -- Part 1: Basic dynamic load rating and basic rating life
30.99 ISO/TC 4/SC 8
ISO/TR 1281-1:2008
Rolling bearings -- Explanatory notes on ISO 281 -- Part 1: Basic dynamic load rating and basic rating life
90.92 ISO/TC 4/SC 8
60.60 ISO/TC 4/SC 8
ISO/TR 1281-2:2008
Rolling bearings -- Explanatory notes on ISO 281 -- Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses
60.60 ISO/TC 4/SC 8
60.60 ISO/TC 4/SC 8
ISO/R 1646:1970
Withdrawal of ISO/R 1646-1970
95.99 ISO/TC 4
ISO/R 1648:1971
Withdrawal of ISO/R 1648-1971
95.99 ISO/TC 4
ISO 2264:1972
Rolling bearings -- Bearings with spherical outside surface and extended inner ring width
95.99 ISO/TC 4
ISO/R 2265:1972
Withdrawal of ISO 2265-1972
95.99 ISO/TC 4
ISO 2316:1973
Withdrawal of ISO 2316-1973
95.99 ISO/TC 4
ISO 2349:1973
Rolling bearings -- Tapered roller bearings -- Sub-units -- Tolerances -- Metric series, normal tolerance class and tolerance class 6 -- Inch series, tolerance class 4 (normal tolerance class)
95.99 ISO/TC 4
ISO 2982:1972
Rolling bearings -- Locknuts, narrow series, and lockwashers with straight inner tab
95.99 ISO/TC 4
ISO 2982-1:1995
Rolling bearings -- Accessories -- Part 1: Tapered sleeves -- Dimensions
95.99 ISO/TC 4
ISO 2982-1:2013
Rolling bearings -- Accessories -- Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves
90.93 ISO/TC 4
ISO 2982-2:1995
Rolling bearings -- Accessories -- Part 2: Locknuts and locking devices -- Dimensions
95.99 ISO/TC 4
ISO 2982-2:2001
Rolling bearings -- Accessories -- Part 2: Locknuts and locking devices -- Dimensions
95.99 ISO/TC 4
ISO 2982-2:2013
Rolling bearings -- Accessories -- Part 2: Dimensions for locknuts and locking devices
90.93 ISO/TC 4
ISO 2983:1975
Rolling bearings -- Locknuts, wide series, and lockwashers with bent inner tab
95.99 ISO/TC 4
ISO 3030:1996
Rolling bearings -- Radial needle roller and cage assemblies -- Dimensions and tolerances
95.99 ISO/TC 4/SC 5
ISO 3030:2011
Rolling bearings -- Radial needle roller and cage assemblies -- Boundary dimensions and tolerances
90.92 ISO/TC 4/SC 5
ISO/DIS 3030
Rolling bearings -- Radial needle roller and cage assemblies -- Boundary dimensions, geometrical product specifications (GPS) and tolerance values
40.99 ISO/TC 4/SC 5
ISO 3030-1:1974
Needle roller bearings -- Needle roller and cage assemblies -- Metric series -- Part 1: Radial needle roller and cage assemblies -- Boundary dimensions and tolerances
95.99 ISO/TC 4/SC 5
ISO 3031:1979
Needle roller bearings -- Thrust needle roller and cage assemblies, thrust washers -- Dimensions and tolerances
95.99 ISO/TC 4/SC 5
ISO 3031:2000
Rolling bearings -- Thrust needle roller and cage assemblies, thrust washers -- Boundary dimensions and tolerances
90.92 ISO/TC 4/SC 5
ISO/DIS 3031
Rolling bearings -- Thrust needle roller and cage assemblies, thrust washers -- Boundary dimensions, geometrical product specifications (GPS) and tolerance values
40.99 ISO/TC 4/SC 5
ISO 3096:1974
Needle roller bearings -- Needle rollers -- Dimensions -- Metric series
95.99 ISO/TC 4/SC 5
ISO 3096:1996
Rolling bearings -- Needle rollers -- Dimensions and tolerances
95.99 ISO/TC 4/SC 5
95.99 ISO/TC 4/SC 5
ISO 3096:2018
Rolling bearings -- Needle rollers -- Boundary dimensions, geometrical product specifications (GPS) and tolerance values
60.60 ISO/TC 4/SC 5
ISO/R 3097:1974
Withdrawal of ISO 3097-1974
95.99 ISO/TC 4
ISO 3145:1974
Rolling bearings -- Bearings with spherical outside surface and extended inner ring width -- Eccentric locking collars
95.99 ISO/TC 4
ISO 3228:1977
Rolling bearings -- Bearings with spherical outside surface and extended inner ring width -- Cast and pressed housings
95.99 ISO/TC 4
ISO 3228:1993
Rolling bearings -- Cast and pressed housings for insert bearings
95.99 ISO/TC 4/SC 6
ISO 3228:2013
Rolling bearings -- Cast and pressed housings for insert bearings -- Boundary dimensions and tolerances
90.93 ISO/TC 4/SC 6
ISO 3245:1974
Rolling bearings -- Needle roller bearings, drawn cup, without inner ring -- Metric series -- Boundary dimensions and tolerances
95.99 ISO/TC 4/SC 5
ISO 3245:1997
Rolling bearings -- Needle roller bearings, drawn cup without inner rings -- Boundary dimensions and tolerances
95.99 ISO/TC 4/SC 5
ISO 3245:2007
Rolling bearings -- Needle roller bearings, drawn cup without inner ring -- Boundary dimensions and tolerances
95.99 ISO/TC 4/SC 5
ISO 3245:2015
Rolling bearings -- Needle roller bearings with drawn cup and without inner ring -- Boundary dimensions, geometrical product specifications (GPS) and tolerance values
60.60 ISO/TC 4/SC 5
ISO 3290:1975
Rolling bearings -- Bearing parts -- Balls for rolling bearings
95.99 ISO/TC 4
ISO 3290:1998
Rolling bearings -- Balls -- Dimensions and tolerances
95.99 ISO/TC 4
ISO 3290:2001
Rolling bearings -- Balls -- Dimensions and tolerances
95.99 ISO/TC 4
ISO 3290-1:2008
Rolling bearings -- Balls -- Part 1: Steel balls
95.99 ISO/TC 4/SC 12
95.99 ISO/TC 4/SC 12
ISO 3290-1:2014
Rolling bearings -- Balls -- Part 1: Steel balls
90.20 ISO/TC 4/SC 12
ISO 3290-2:2008
Rolling bearings -- Balls -- Part 2: Ceramic balls
95.99 ISO/TC 4/SC 12
ISO 3290-2:2014
Rolling bearings -- Balls -- Part 2: Ceramic balls
90.20 ISO/TC 4/SC 12
ISO 5593:1984
Rolling bearings -- Vocabulary
95.99 ISO/TC 4
ISO 5593:1997
Rolling bearings -- Vocabulary
95.99 ISO/TC 4
95.99 ISO/TC 4
ISO 5593:2019
Rolling bearings -- Vocabulary
60.60 ISO/TC 4
ISO 5753:1981
Rolling bearings -- Radial internal clearance
95.99 ISO/TC 4
ISO 5753:1991
Rolling bearings -- Radial internal clearance
95.99 ISO/TC 4/SC 4
ISO 5753-1:2009
Rolling bearings -- Internal clearance -- Part 1: Radial internal clearance for radial bearings
90.93 ISO/TC 4/SC 4
ISO 5753-2:2010
Rolling bearings -- Internal clearance -- Part 2: Axial internal clearance for four-point-contact ball bearings
90.93 ISO/TC 4/SC 4
ISO 6193:1980
Rolling bearings -- Needle rollers -- Tolerances
95.99 ISO/TC 4
ISO 6278:1980
Needle roller bearings -- Track rollers -- Boundary dimensions
95.99 ISO/TC 4/SC 5
ISO 6979:1982
Needle roller bearings -- Heavy series -- Dimensions and tolerances
95.99 ISO/TC 4/SC 5
ISO 7063:1982
Needle roller bearings -- Track rollers -- Tolerances
95.99 ISO/TC 4/SC 5
ISO 7063:2003
Rolling bearings -- Needle roller bearing track rollers -- Boundary dimensions and tolerances
95.99 ISO/TC 4/SC 5
ISO 7063:2018
Rolling bearings -- Needle roller bearing track rollers -- Boundary dimensions, geometrical product specifications (GPS) and tolerance values
60.60 ISO/TC 4/SC 5
ISO 8443:1985
Radial ball bearings with flanged outer ring -- Flange dimensions
95.99 ISO/TC 4
95.99 ISO/TC 4
ISO 8443:1999
Rolling bearings -- Radial ball bearings with flanged outer ring -- Flange dimensions
95.99 ISO/TC 4
ISO 8443:2010
Rolling bearings -- Radial ball bearings with flanged outer ring -- Flange dimensions
90.93 ISO/TC 4/SC 12
ISO/TR 8646:1985
Explanatory notes on ISO 281/1-1977
95.99 ISO/TC 4/SC 8
ISO 8826-1:1989
Technical drawings -- Rolling bearings -- Part 1: General simplified representation
90.93 ISO/TC 10/SC 6
ISO 8826-2:1994
Technical drawings -- Rolling bearings -- Part 2: Detailed simplified representation
90.93 ISO/TC 10/SC 6
ISO/TR 9274:1991
Rolling bearings -- Measuring and gauging principles and methods
95.99 ISO/TC 4/SC 4
ISO 9628
Rolling bearings -- Insert bearings and eccentric locking collars -- Geometrical product specifications (GPS) and tolerance values
60.00 ISO/TC 4/SC 6
ISO 9628:1992
Rolling bearings -- Insert bearings and eccentric locking collars
95.99 ISO/TC 4/SC 6
ISO 9628:2006
Rolling bearings -- Insert bearings and eccentric locking collars -- Boundary dimensions and tolerances
90.92 ISO/TC 4/SC 6
ISO 9628:2006/Amd 1:2011
Diameter series 3
60.60 ISO/TC 4/SC 6
ISO 10285:1992
Rolling bearings, linear motion, recirculating ball, sleeve type -- Metric series
95.99 ISO/TC 4/SC 11
ISO 10285:2007
Rolling bearings -- Sleeve type linear ball bearings -- Boundary dimensions and tolerances
90.93 ISO/TC 4/SC 11
60.60 ISO/TC 4/SC 11
ISO 10317:1992
Rolling bearings -- Metric tapered roller bearings -- Designation system
95.99 ISO/TC 4/SC 9
ISO 10317:2008
Rolling bearings -- Tapered roller bearings -- Designation system
90.93 ISO/TC 4/SC 9
ISO 10317:2008/Amd 1:2013
Design variant designation and comparison of tolerance class designations for single-row tapered roller bearings
60.60 ISO/TC 4/SC 9
ISO/DTR 10657
Explanatory notes on ISO 76
30.99 ISO/TC 4/SC 8
ISO/TR 10657:1991
Explanatory notes on ISO 76
90.92 ISO/TC 4/SC 8
ISO 12043:1995
Rolling bearings -- Single-row cylindrical roller bearings -- Chamfer dimensions for loose rib and non-rib sides
95.99 ISO/TC 4
ISO 12043:2007
Rolling bearings -- Single-row cylindrical roller bearings -- Chamfer dimensions for loose rib and non-rib sides
90.93 ISO/TC 4/SC 5
ISO 12044:1995
Rolling bearings -- Single-row angular contact ball bearings -- Chamfer dimensions for outer ring non-thrust side
95.99 ISO/TC 4/SC 12
ISO 12044:2014
Rolling bearings -- Single-row angular contact ball bearings -- Chamfer dimensions for outer ring non-thrust side
90.20 ISO/TC 4/SC 12
ISO 12090-1:2011
Rolling bearings -- Profiled rail guides for linear motion rolling bearings -- Part 1: Boundary dimensions and tolerances for series 1, 2 and 3
90.93 ISO/TC 4/SC 11
ISO 12090-2:2011
Rolling bearings -- Profiled rail guides for linear motion rolling bearings -- Part 2: Boundary dimensions and tolerances for series 4 and 5
90.93 ISO/TC 4/SC 11
ISO 12297:2012
Rolling bearings -- Steel cylindrical rollers -- Dimensions and tolerances
90.92 ISO/TC 4/SC 5
ISO/DIS 12297-1
Rolling bearings -- Cylindrical rollers -- Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for steel rollers
40.60 ISO/TC 4/SC 5
ISO 12297-2:2018
Rolling bearings -- Cylindrical rollers -- Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
60.60 ISO/TC 4/SC 5
ISO 13012:1998
Rolling bearings, linear motion, recirculating ball, sleeve type -- Accessories
95.99 ISO/TC 4/SC 11
95.99 ISO/TC 4/SC 11
ISO 13012-1:2009
Rolling bearings -- Accessories for sleeve type linear ball bearings -- Part 1: Boundary dimensions and tolerances for series 1 and 3
95.99 ISO/TC 4/SC 11
ISO 13012-1:2018
Rolling bearings -- Accessories for sleeve type linear ball bearings -- Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 1 and 3
60.60 ISO/TC 4/SC 11
ISO 13012-2:2009
Rolling bearings -- Accessories for sleeve type linear ball bearings -- Part 2: Boundary dimensions and tolerances for series 5
95.99 ISO/TC 4/SC 11
ISO 13012-2:2018
Rolling bearings -- Accessories for sleeve type linear ball bearings -- Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 5
60.60 ISO/TC 4/SC 11
ISO 14728-1:2004
Rolling bearings -- Linear motion rolling bearings -- Part 1: Dynamic load ratings and rating life
95.99 ISO/TC 4/SC 8
ISO 14728-1:2017
Rolling bearings -- Linear motion rolling bearings -- Part 1: Dynamic load ratings and rating life
60.60 ISO/TC 4/SC 8
ISO 14728-2:2004
Rolling bearings -- Linear motion rolling bearings -- Part 2: Static load ratings
95.99 ISO/TC 4/SC 8
ISO 14728-2:2017
Rolling bearings -- Linear motion rolling bearings -- Part 2: Static load ratings
60.60 ISO/TC 4/SC 8
ISO 15241:2001
Rolling bearings -- Symbols for quantities
95.99 ISO/TC 4
ISO 15241:2012
Rolling bearings -- Symbols for physical quantities
90.93 ISO/TC 4
40.20 ISO/TC 4
40.98 ISO/TC 4
ISO 15242-1:2004
Rolling bearings -- Measuring methods for vibration -- Part 1: Fundamentals
95.99 ISO/TC 4/SC 4
ISO 15242-1:2015
Rolling bearings -- Measuring methods for vibration -- Part 1: Fundamentals
60.60 ISO/TC 4
ISO 15242-2:2004
Rolling bearings -- Measuring methods for vibration -- Part 2: Radial ball bearings with cylindrical bore and outside surface
95.99 ISO/TC 4/SC 4
95.99 ISO/TC 4/SC 4
ISO 15242-2:2015
Rolling bearings -- Measuring methods for vibration -- Part 2: Radial ball bearings with cylindrical bore and outside surface
60.60 ISO/TC 4
ISO 15242-3:2006
Rolling bearings -- Measuring methods for vibration -- Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
95.99 ISO/TC 4
95.99 ISO/TC 4/SC 4
ISO 15242-3:2017
Rolling bearings -- Measuring methods for vibration -- Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
60.60 ISO/TC 4
ISO 15242-4:2007
Rolling bearings -- Measuring methods for vibration -- Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
95.99 ISO/TC 4
ISO 15242-4:2017
Rolling bearings -- Measuring methods for vibration -- Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
60.60 ISO/TC 4
ISO 15243:2004
Rolling bearings -- Damage and failures -- Terms, characteristics and causes
95.99 ISO/TC 4
ISO 15243:2017
Rolling bearings -- Damage and failures -- Terms, characteristics and causes
60.60 ISO/TC 4
ISO 15312:2003
Rolling bearings -- Thermal speed rating -- Calculation and coefficients
95.99 ISO/TC 4/SC 8
ISO 15312:2018
Rolling bearings -- Thermal speed rating -- Calculation
60.60 ISO/TC 4/SC 8
ISO/TS 16281:2008
Rolling bearings -- Methods for calculating the modified reference rating life for universally loaded bearings
90.20 ISO/TC 4/SC 8
60.60 ISO/TC 4/SC 8
ISO/TS 16799:1999
Rolling bearings -- Dynamic load ratings and rating life -- Discontinuities in the calculating of basic dynamic load ratings
95.99 ISO/TC 4/SC 8
ISO 19843:2018
Rolling bearings -- Ceramic bearing balls -- Determination of strength by notched ball test
60.60 ISO/TC 4/SC 12
ISO 20015:2017
Spherical plain bearings -- Method for the calculation of static and dynamic load ratings
60.60 ISO/TC 4/SC 8
ISO 20056-1:2017
Rolling bearings -- Load ratings for hybrid bearings with rolling elements made of ceramic -- Part 1: Dynamic load ratings
60.60 ISO/TC 4/SC 8
ISO 20056-2:2017
Rolling bearings -- Load ratings for hybrid bearings with rolling elements made of ceramic -- Part 2: Static load ratings
60.60 ISO/TC 4/SC 8
ISO 20515:2007
Rolling bearings -- Radial bearings, retaining slots -- Dimensions and tolerances
95.99 ISO/TC 4/SC 12
ISO 20515:2012
Rolling bearings -- Radial bearings, retaining slots -- Dimensions and tolerances
90.92 ISO/TC 4/SC 12
ISO/CD 20515
Rolling bearings -- Radial bearings, retaining slots -- Dimensions and tolerances
30.20 ISO/TC 4/SC 12
ISO 20516:2007
Rolling bearings -- Aligning thrust ball bearings and aligning seat washers -- Boundary dimensions
90.93 ISO/TC 4/SC 12
ISO/DIS 21250-1
Rolling bearings - Noise testing of rolling bearing greases -- Part 1: Basic principles, testing assembly and test machine
40.99 ISO/TC 4
ISO/DIS 21250-2
Rolling bearings -- Noise testing of rolling bearing greases -- Part 2: Test and evaluation method BQ+
40.99 ISO/TC 4
ISO/DIS 21250-3
Rolling bearings -- Noise testing of rolling bearing greases -- Part 3: Test and evaluation method MQ
40.99 ISO/TC 4
ISO/DIS 21250-4
Rolling bearings -- Noise testing of rolling bearing greases -- Part 4: Test and evaluation method NQ
40.20 ISO/TC 4
ISO/DTS 23768-1
Rolling bearings -- Parts library -- Part 1: Reference dictionary for rolling bearings
30.99 ISO/TC 4
ISO/TS 23768-1:2011
Rolling bearings -- Parts library -- Part 1: Reference dictionary for rolling bearings
90.92 ISO/TC 4
ISO 24393:2008
Rolling bearings -- Linear motion rolling bearings -- Vocabulary
90.93 ISO/TC 4/SC 11

По запросу ничего не найдено