• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект Этап ТК
ISO 225:1983
Fasteners — Bolts, screws, studs and nuts — Symbols and designations of dimensions
95.99 ISO/TC 2/SC 7
ISO 225:2010
Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
90.93 ISO/TC 2/SC 7
ISO/R 861:1968
Withdrawal of ISO/R 861-1968
95.99 ISO/TC 2
ISO 885:1976
General purpose bolts and screws — Metric series — Radii under the head
95.99 ISO/TC 2/SC 7
ISO 885:2000
General purpose bolts and screws — Metric series — Radii under the head
90.93 ISO/TC 2/SC 7
ISO 888:1976
Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts
95.99 ISO/TC 2/SC 7
ISO 888:2012
Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths
90.93 ISO/TC 2/SC 7
ISO 898-1:1978
Mechanical properties of fasteners — Part 1: Bolts, screws and studs
95.99 ISO/TC 2
ISO 898-1:1988
Mechanical properties of fasteners — Part 1: Bolts, screws and studs
95.99 ISO/TC 2
ISO 898-1:1999
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs
95.99 ISO/TC 2
ISO 898-1:2009
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
95.99 ISO/TC 2/SC 11
ISO 898-1:2013
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
90.93 ISO/TC 2/SC 11
ISO 898-1:2013/Cor 1:2013
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread — Technical Corrigendum 1
60.60 ISO/TC 2/SC 11
ISO 898-5:1980
Mechanical properties of fasteners — Part 5: Set screws and similar threaded fasteners not under tensile stresses
95.99 ISO/TC 2
ISO 898-5:1998
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners not under tensile stresses
95.99 ISO/TC 2/SC 11
ISO 898-5:2012
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
90.93 ISO/TC 2/SC 11
ISO 898-7:1992
Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
90.93 ISO/TC 2/SC 11
ISO 1207:1983
Slotted cheese head screws — Product grade A
95.99 ISO/TC 2
ISO 1207:1992
Slotted cheese head screws — Product grade A
95.99 ISO/TC 2/SC 11
ISO 1207:2011
Slotted cheese head screws — Product grade A
90.93 ISO/TC 2/SC 11
ISO 1479:1983
Hexagon head tapping screws
95.99 ISO/TC 2/SC 13
ISO 1479:2011
Hexagon head tapping screws
90.93 ISO/TC 2/SC 13
ISO/R 1480:1970
Hexagon head tapping screws — Inch series
95.99 ISO/TC 2
ISO 1481:1983
Slotted pan head tapping screws
95.99 ISO/TC 2/SC 13
ISO 1481:2011
Slotted pan head tapping screws
90.93 ISO/TC 2/SC 13
ISO 1482:1983
Slotted countersunk (flat) head tapping screws (common head style)
95.99 ISO/TC 2/SC 13
ISO 1482:2011
Slotted countersunk (flat) head tapping screws
90.93 ISO/TC 2/SC 13
ISO 1483:1983
Slotted raised countersunk (oval) head tapping screws (common head style)
95.99 ISO/TC 2/SC 13
ISO 1483:2011
Slotted raised countersunk (oval) head tapping screws
90.93 ISO/TC 2/SC 13
ISO 1580:1983
Slotted pan head screws — Product grade A
95.99 ISO/TC 2
ISO 1580:1994
Slotted pan head screws — Product grade A
95.99 ISO/TC 2/SC 11
ISO 1580:2011
Slotted pan head screws — Product grade A
90.93 ISO/TC 2/SC 11
ISO 2009:1983
Slotted countersunk flat head screws (common head style) — Product grade A
95.99 ISO/TC 2
ISO 2009:1994
Slotted countersunk flat head screws (common head style) — Product grade A
95.99 ISO/TC 2/SC 11
ISO 2009:2011
Slotted countersunk flat head screws — Product grade A
90.93 ISO/TC 2/SC 11
ISO 2010:1983
Slotted raised countersunk head screws (common head style) — Product grade A
95.99 ISO/TC 2
ISO 2010:1994
Countersunk slotted raised head screws (common head style) — Product grade A
95.99 ISO/TC 2/SC 11
ISO 2010:2011
Slotted raised countersunk head screws — Product grade A
90.93 ISO/TC 2/SC 11
ISO 2342:1972
Slotted headless screws — Metric series
95.99 ISO/TC 2
ISO 2342:2003
Slotted headless screws with shank
90.93 ISO/TC 2/SC 11
ISO 2359:1972
Prevailing torque-type steel hexagon locknuts — Dimensions — Inch series
95.99 ISO/TC 2
ISO 2702:1974
Heat-treated steel tapping screws — Mechanical properties
95.99 ISO/TC 2
ISO 2702:1992
Heat-treated steel tapping screws — Mechanical properties
95.99 ISO/TC 2/SC 13
ISO 2702:2011
Heat-treated steel tapping screws — Mechanical properties
90.92 ISO/TC 2/SC 13
ISO/DIS 2702
Fasteners — Heat-treated self-tapping screws — Mechanical and physical properties
40.60 ISO/TC 2/SC 13
ISO 2770:1974
Tapping screws according to ISO/R 1478 to 1483 — Minimum and maximum lengths
95.99 ISO/TC 2
ISO 3506-1:1997
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs
95.99 ISO/TC 2
ISO 3506-1:2009
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs
90.92 ISO/TC 2
ISO 3506-3:1997
Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
95.99 ISO/TC 2
ISO 3506-3:2009
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
90.92 ISO/TC 2
ISO 3506-4:2003
Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 4: Tapping screws
95.99 ISO/TC 2
ISO 3506-4:2009
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws
90.92 ISO/TC 2
ISO/CD 3506-3
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
30.99 ISO/TC 2
ISO/CD 3506-4
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws
30.99 ISO/TC 2
ISO/FDIS 3506-1
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs with specified grades and property classes
50.00 ISO/TC 2
ISO 4014:1979
Hexagon head bolts — Product grades A and B
95.99 ISO/TC 2
ISO 4014:1988
Hexagon head bolts — Product grades A and B
95.99 ISO/TC 2
ISO 4014:1999
Hexagon head bolts — Product grades A and B
95.99 ISO/TC 2/SC 11
ISO 4014:2011
Hexagon head bolts — Product grades A and B
90.92 ISO/TC 2/SC 11
ISO/CD 4014
Hexagon head bolts — Product grades A and B
30.99 ISO/TC 2/SC 11
ISO 4015:1979
Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter)
90.92 ISO/TC 2/SC 11
ISO/CD 4015
Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter)
30.99 ISO/TC 2/SC 11
ISO 4016:1979
Hexagon head bolts — Product grade C
95.99 ISO/TC 2
ISO 4016:1988
Hexagon head bolts — Product grade C
95.99 ISO/TC 2
ISO 4016:1999
Hexagon head bolts — Product grade C
95.99 ISO/TC 2/SC 11
ISO 4016:2011
Hexagon head bolts — Product grade C
90.92 ISO/TC 2/SC 11
ISO/CD 4016
Hexagon head bolts — Product grade C
30.99 ISO/TC 2/SC 11
ISO 4017:1979
Hexagon head screws — Product grades A and B
95.99 ISO/TC 2
ISO 4017:1988
Hexagon head screws — Product grades A and B
95.99 ISO/TC 2
ISO 4017:1999
Hexagon head screws — Product grades A and B
95.99 ISO/TC 2/SC 11
ISO 4017:2011
Hexagon head screws — Product grades A and B
95.99 ISO/TC 2/SC 11
ISO 4017:2014
Fasteners — Hexagon head screws — Product grades A and B
90.92 ISO/TC 2/SC 11
ISO/CD 4017
Fasteners — Hexagon head screws — Product grades A and B
30.99 ISO/TC 2/SC 11
ISO 4018:1979
Hexagon head screws — Product grade C
95.99 ISO/TC 2
ISO 4018:1988
Hexagon head screws — Product grade C
95.99 ISO/TC 2
ISO 4018:1999
Hexagon head screws — Product grade C
95.99 ISO/TC 2/SC 11
ISO 4018:2011
Hexagon head screws — Product grade C
90.92 ISO/TC 2/SC 11
ISO/CD 4018
Hexagon head screws — Product grade C
30.99 ISO/TC 2/SC 11
ISO 4026:1977
Hexagon socket set screws with flat point
95.99 ISO/TC 2
ISO 4026:1993
Hexagon socket set screws with flat point
95.99 ISO/TC 2
ISO 4026:2003
Hexagon socket set screws with flat point
90.93 ISO/TC 2/SC 11
ISO 4027:1977
Hexagon socket set screws with cone point
95.99 ISO/TC 2
ISO 4027:1993
Hexagon socket set screws with cone point
95.99 ISO/TC 2
ISO 4027:2003
Hexagon socket set screws with cone point
90.93 ISO/TC 2/SC 11
ISO 4028:1977
Hexagon socket set screws with dog point
95.99 ISO/TC 2
ISO 4028:1993
Hexagon socket set screws with dog point
95.99 ISO/TC 2
ISO 4028:2003
Hexagon socket set screws with dog point
90.93 ISO/TC 2/SC 11
ISO 4029:1977
Hexagon socket set screws with cup point
95.99 ISO/TC 2
ISO 4029:1993
Hexagon socket set screws with cup point
95.99 ISO/TC 2
ISO 4029:2003
Hexagon socket set screws with cup point
90.93 ISO/TC 2/SC 11
ISO 4162:1990
Hexagon flange bolts — Small series
95.99 ISO/TC 2/SC 11
ISO 4162:2012
Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B
90.93 ISO/TC 2/SC 11
ISO 4757:1983
Cross recesses for screws
90.93 ISO/TC 2/SC 13
ISO 4759-1:1978
Tolerances for fasteners — Part 1: Bolts, screws and nuts with thread diameters between 1,6 (inclusive) and 150 mm (inclusive) and product grades A, B and C
95.99 ISO/TC 2/SC 7
ISO 4759-1:2000
Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
90.93 ISO/TC 2/SC 7
ISO 4759-2:1979
Tolerances for fasteners — Part 2: Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F, for fine mechanics
95.99 ISO/TC 2/SC 7
ISO 4762:1977
Hexagon socket head cap screws — Product grade A
95.99 ISO/TC 2
ISO 4762:1977/Amd 1:1984
Hexagon socket head cap screws — Product grade A — Amendment 1
95.99 ISO/TC 2
ISO 4762:1989
Hexagon socket head cap screws — Product grade A
95.99 ISO/TC 2
ISO 4762:1997
Hexagon socket head cap screws
95.99 ISO/TC 2
ISO 4762:2004
Hexagon socket head cap screws
90.93 ISO/TC 2/SC 11
ISO 4766:1983
Slotted set screws with flat point
95.99 ISO/TC 2/SC 11
ISO 4766:2011
Slotted set screws with flat point
90.93 ISO/TC 2/SC 11
ISO 6157-1:1988
Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
90.93 ISO/TC 2/SC 7
ISO 6157-3:1988
Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements
90.93 ISO/TC 2/SC 7
ISO 7045:1983
Cross-recessed pan head screws — Product grade A
95.99 ISO/TC 2
ISO 7045:1994
Pan head screws with type H or type Z cross recess — Product grade A
95.99 ISO/TC 2/SC 11
ISO 7045:2011
Pan head screws with type H or type Z cross recess — Product grade A
90.93 ISO/TC 2/SC 11
ISO 7046-1:1994
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel of property class 4.8
95.99 ISO/TC 2/SC 11
ISO 7046-1:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8
90.93 ISO/TC 2/SC 11
ISO 7046-2:1990
Cross-recessed countersunk flat head screws (common head style) — Grade A — Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals
95.99 ISO/TC 2/SC 11
ISO 7046-2:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
90.93 ISO/TC 2/SC 11
ISO 7046:1983
Cross recessed countersunk flat head screws (common head style) — Product grade A and property class 4.8 only
95.99 ISO/TC 2
ISO 7047:1983
Cross-recessed raised countersunk head screws (common head style) — Product grade A
95.99 ISO/TC 2
ISO 7047:1994
Countersunk raised head screws (common head style) with type H or type Z cross recess — Product grade A
95.99 ISO/TC 2/SC 11
ISO 7047:2011
Raised countersunk head screws (common head style) with type H or type Z cross recess — Product grade A
90.93 ISO/TC 2/SC 11
ISO 7048:1998
Cross recessed cheese head screws
95.99 ISO/TC 2/SC 11
ISO 7048:2011
Cross-recessed cheese head screws
90.93 ISO/TC 2/SC 11
ISO 7049:1983
Cross recessed pan head tapping screws
95.99 ISO/TC 2/SC 13
ISO 7049:2011
Cross-recessed pan head tapping screws
90.93 ISO/TC 2/SC 13
ISO 7050:1983
Cross recessed countersunk (flat) head tapping screws (common head style)
95.99 ISO/TC 2/SC 13
ISO 7050:2011
Cross-recessed countersunk (flat) head tapping screws
90.93 ISO/TC 2/SC 13
ISO 7051:1983
Cross recessed raised countersunk (oval) head tapping screws
95.99 ISO/TC 2/SC 13
ISO 7051:2011
Cross-recessed raised countersunk (oval) head tapping screws
90.93 ISO/TC 2/SC 13
ISO 7053:1992
Hexagon washer head tapping screws
95.99 ISO/TC 2/SC 13
ISO 7053:2011
Hexagon washer head tapping screws
95.99 ISO/TC 2/SC 13
ISO 7053:2019
Fasteners — Hexagon washer head tapping screws
60.60 ISO/TC 2/SC 13
ISO 7085:1999
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
95.99 ISO/TC 2
ISO 7378:1983
Fasteners — Bolts, screws and studs — Split pin holes and wire holes
90.93 ISO/TC 2/SC 7
ISO 7379:1983
Hexagon socket head shoulder screws
90.93 ISO/TC 2/SC 11
ISO 7380-1:2011
Button head screws — Part 1: Hexagon socket button head screws
90.92 ISO/TC 2/SC 11
ISO 7380-2:2011
Button head screws — Part 2: Hexagon socket button head screws with collar
90.92 ISO/TC 2/SC 11
ISO 7380:1983
Hexagon socket button head screws — Metric series
95.99 ISO/TC 2
ISO 7380:1997
Hexagon socket button head screws
95.99 ISO/TC 2
ISO 7380:2004
Hexagon socket button head screws
95.99 ISO/TC 2/SC 11
ISO/CD 7380-1
Button head screws — Part 1: Hexagon socket button head screws
30.00 ISO/TC 2/SC 11
ISO/CD 7380-2
Button head screws — Part 2: Hexagon socket button head screws with collar
30.00 ISO/TC 2/SC 11
ISO 7411:1984
Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) — Product grade C — Property classes 8.8 and 10.9
95.99 ISO/TC 2
ISO 7412:1984
Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) — Product grade C — Property classes 8.8 and 10.9
95.99 ISO/TC 2
ISO 7434:1983
Slotted set screws with cone point
90.93 ISO/TC 2/SC 11
ISO 7435:1983
Slotted set screws with long dog point
90.93 ISO/TC 2/SC 11
ISO 7436:1983
Slotted set screws with cup point
90.93 ISO/TC 2/SC 11
ISO 7721-2:1990
Countersunk flat head screws — Part 2: Penetration depth of cross recesses
90.93 ISO/TC 2/SC 11
ISO 7721:1983
Countersunk head screws — Head configuration and gauging
90.93 ISO/TC 2/SC 11
ISO 8676:1988
Hexagon head screws with metric fine pitch thread — Product grades A and B
95.99 ISO/TC 2
ISO 8676:1999
Hexagon head screws with metric fine pitch thread — Product grades A and B
95.99 ISO/TC 2/SC 11
ISO 8676:2011
Hexagon head screws with metric fine pitch thread — Product grades A and B
90.92 ISO/TC 2/SC 11
ISO/CD 8676
Hexagon head screws with metric fine pitch thread — Product grades A and B
30.99 ISO/TC 2/SC 11
ISO 8677:1986
Cup head square neck bolts with large head — Product grade C
95.99 ISO/TC 2
ISO 8678:1988
Cup head square neck bolts with small head and short neck — Product grade B
90.93 ISO/TC 2/SC 11
ISO 8765:1988
Hexagon head bolts with metric fine pitch thread — Product grades A and B
95.99 ISO/TC 2
ISO 8765:1999
Hexagon head bolts with metric fine pitch thread — Product grades A and B
95.99 ISO/TC 2/SC 11
ISO 8765:2011
Hexagon head bolts with metric fine pitch thread — Product grades A and B
90.92 ISO/TC 2/SC 11
ISO/CD 8765
Hexagon head bolts with metric fine pitch thread — Product grades A and B
30.99 ISO/TC 2/SC 11
ISO 8839:1986
Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals
95.99 ISO/TC 2/SC 11
ISO 8992:1986
Fasteners — General requirements for bolts, screws, studs and nuts
95.99 ISO/TC 2/SC 7
ISO 8992:2005
Fasteners — General requirements for bolts, screws, studs and nuts
90.93 ISO/TC 2/SC 7
ISO 10509:1992
Hexagon flange head tapping screws
95.99 ISO/TC 2/SC 13
ISO 10509:2012
Hexagon flange head tapping screws
90.93 ISO/TC 2/SC 13
ISO 10510:1999
Tapping screw and washer assemblies with plain washers
95.99 ISO/TC 2/SC 13
ISO 10510:2011
Tapping screw and washer assemblies with plain washers
90.93 ISO/TC 2/SC 13
ISO 10642
Fasteners — Hexagon socket countersunk head screws with reduced loadability
60.00 ISO/TC 2/SC 11
ISO 10642:1997
Hexagon socket countersunk head screws
95.99 ISO/TC 2
ISO 10642:2004
Hexagon socket countersunk head screws
90.92 ISO/TC 2/SC 11
ISO 10642:2004/Amd 1:2012
Hexagon socket countersunk head screws — Amendment 1
60.60 ISO/TC 2/SC 11
ISO 10664:1999
Hexalobular internal driving feature for bolts and screws
95.99 ISO/TC 2
ISO 10664:2005
Hexalobular internal driving feature for bolts and screws
95.99 ISO/TC 2/SC 11
ISO 10664:2014
Hexalobular internal driving feature for bolts and screws
90.93 ISO/TC 2/SC 11
ISO 10666:1999
Drilling screws with tapping screw thread — Mechanical and functional properties
90.93 ISO/TC 2/SC 13
ISO 12474:2010
Hexagon socket head cap screws with metric fine pitch thread
90.93 ISO/TC 2/SC 11
ISO 13918:1998
Welding — Studs and ceramic ferrules for arc stud welding
95.99 ISO/TC 44/SC 10
ISO 13918:2008
Welding — Studs and ceramic ferrules for arc stud welding
95.99 ISO/TC 44/SC 10
ISO 13918:2017
Welding — Studs and ceramic ferrules for arc stud welding
60.60 ISO/TC 44/SC 10
ISO 13918:2017/DAmd 1
Welding — Studs and ceramic ferrules for arc stud welding — Amendment 1
40.60 ISO/TC 44/SC 10
ISO 14579:2001
Hexalobular socket head cap screws
95.99 ISO/TC 2/SC 11
ISO 14579:2011
Hexalobular socket head cap screws
90.93 ISO/TC 2/SC 11
ISO 14580:2001
Hexalobular socket cheese head screws
95.99 ISO/TC 2/SC 11
ISO 14580:2001/Cor 1:2004
Hexalobular socket cheese head screws — Technical Corrigendum 1
95.99 ISO/TC 2/SC 11
ISO 14580:2011
Hexalobular socket cheese head screws
90.93 ISO/TC 2/SC 11
ISO 14581:2013
Fasteners — Hexalobular socket countersunk flat head screws
90.92 ISO/TC 2/SC 11
ISO/NP 14581
Fasteners — Hexalobular socket countersunk flat head screws with reduced loadability
10.99 ISO/TC 2/SC 11
ISO 14582:2013
Fasteners — Hexalobular socket countersunk head screws, high head
90.93 ISO/TC 2/SC 11
ISO 14583:2001
Hexalobular socket pan head screws
95.99 ISO/TC 2/SC 11
ISO 14583:2001/Cor 1:2004
Hexalobular socket pan head screws — Technical Corrigendum 1
95.99 ISO/TC 2
ISO 14583:2011
Hexalobular socket pan head screws
90.93 ISO/TC 2/SC 11
ISO 14584:2001
Hexalobular socket raised countersunk head screws
95.99 ISO/TC 2/SC 11
ISO 14584:2011
Hexalobular socket raised countersunk head screws
90.93 ISO/TC 2/SC 11
ISO 14585:2001
Hexalobular socket pan head tapping screws
95.99 ISO/TC 2/SC 13
ISO 14585:2001/Cor 1:2004
Hexalobular socket pan head tapping screws — Technical Corrigendum 1
95.99 ISO/TC 2/SC 13
ISO 14585:2011
Hexalobular socket pan head tapping screws
90.93 ISO/TC 2/SC 13
ISO 14586:2001
Hexalobular socket countersunk head tapping screws
95.99 ISO/TC 2/SC 13
ISO 14586:2011
Hexalobular socket countersunk head tapping screws
90.93 ISO/TC 2/SC 13
ISO 14587:2001
Hexalobular socket raised countersunk (oval) head tapping screws
95.99 ISO/TC 2/SC 13
ISO 14587:2011
Hexalobular socket raised countersunk (oval) head tapping screws
90.93 ISO/TC 2/SC 13
ISO 15065:2005
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
90.93 ISO/TC 2/SC 7
ISO 15071:1999
Hexagon bolts with flange — Small series — Product grade A
95.99 ISO/TC 2/SC 11
ISO 15071:1999/Cor 1:2006
Hexagon bolts with flange — Small series — Product grade A — Technical Corrigendum 1
95.99 ISO/TC 2
ISO 15071:2011
Hexagon bolts with flange — Small series — Product grade A
90.93 ISO/TC 2/SC 11
ISO 15072:1999
Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A
95.99 ISO/TC 2/SC 11
ISO 15072:1999/Cor 1:2006
Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A — Technical Corrigendum 1
95.99 ISO/TC 2/SC 11
ISO 15072:2012
Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A
90.93 ISO/TC 2/SC 11
ISO 15480:1999
Hexagon washer head drilling screws with tapping screw thread
95.99 ISO/TC 2/SC 13
ISO 15480:2019
Fasteners — Hexagon washer head drilling screws with tapping screw thread
60.60 ISO/TC 2/SC 13
ISO 15481:1999
Cross recessed pan head drilling screws with tapping screw thread
90.93 ISO/TC 2/SC 13
ISO 15482:1999
Cross recessed countersunk head drilling screws with tapping screw thread
90.93 ISO/TC 2/SC 13
ISO 15483:1999
Cross recessed raised countersunk head drilling screws with tapping screw thread
90.93 ISO/TC 2/SC 13
ISO 21269:2004
Hexagon socket head cap screws with metric fine pitch thread
95.99 ISO/TC 2
ISO 23429:2004
Gauging of hexagon sockets
90.93 ISO/TC 2/SC 11

По запросу ничего не найдено