Safety, security and sustainability of cannabis facilities and operations — Part 1: Requirements for the safety of cannabis buildings, equipment and oil extraction operations
|
50.00
|
ISO/TMBG
|
Pandemic response — Social distancing and source control
|
30.60
|
ISO/TC 304
|
Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supply to safety services
|
90.92
|
ISO/TC 70
|
Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supply to safety services
|
50.20
|
ISO/TC 70
|
Ergonomics of human-system interaction — Part 430: Recommendations for the design of non-touch gestural input for the reduction of biomechanical stress
|
60.60
|
ISO/TC 159/SC 4
|
Ergonomics of human-system interaction — Part 610: Impact of light and lighting on users of interactive systems
|
50.00
|
ISO/TC 159/SC 4
|
Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles
|
95.99
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles
|
90.92
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 2: Sampling of gases
|
90.92
|
ISO/TC 44/SC 9
|
Nanotechnologies — Health and safety practices in occupational settings relevant to nanotechnologies
|
95.99
|
ISO/TC 229
|
Nanotechnologies — Health and safety practices in occupational settings
|
60.60
|
ISO/TC 229
|
Ergonomics of the thermal environment — Medical supervision of individuals exposed to extreme hot or cold environments
|
90.93
|
ISO/TC 159/SC 5
|
Nanotechnologies — Occupational risk management applied to engineered nanomaterials — Part 1: Principles and approaches
|
90.92
|
ISO/TC 229
|
Nanotechnologies — Occupational risk management applied to engineered nanomaterials — Part 1: Principles and approaches
|
30.00
|
ISO/TC 229
|
Nanotechnologies — Occupational risk management applied to engineered nanomaterials — Part 2: Use of the control banding approach
|
90.92
|
ISO/TC 229
|
Nanomaterials — Preparation of material safety data sheet (MSDS)
|
90.92
|
ISO/TC 229
|
Health and safety in welding and allied processes — Arc welding fume components
|
90.93
|
IIW
|
Industrial furnaces and associated processing equipment — Safety — Part 1: General requirements
|
95.99
|
ISO/TC 244
|
Industrial furnaces and associated processing equipment — Safety — Part 1: General requirements
|
90.93
|
ISO/TC 244
|
Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
|
90.92
|
ISO/TC 244
|
Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
|
50.00
|
ISO/TC 244
|
Industrial furnaces and associated processing equipment — Safety — Part 3: Generation and use of protective and reactive atmosphere gases
|
90.93
|
ISO/TC 244
|
Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems
|
90.92
|
ISO/TC 244
|
Industrial furnaces and associated processing equipment — Safety — Part 4: Protective systems
|
60.00
|
ISO/TC 244
|
Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces
|
60.60
|
ISO/TC 244
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases generated by arc welding — Part 1: Determination of emission rate and sampling for analysis of particulate fume
|
95.99
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis
|
90.60
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases generated by arc welding — Part 2: Determination of emission rates of gases, except ozone
|
95.99
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging
|
90.93
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases generated by arc welding — Part 3: Determination of ozone concentration using fixed point measurements
|
95.99
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 3: Determination of ozone emission rate during arc welding
|
90.93
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 4: Fume data sheets
|
95.99
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 4: Fume data sheets — Amendment 1
|
95.99
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 4: Fume data sheets
|
90.60
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry
|
90.60
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials
|
95.99
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding
|
90.60
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding — Technical Corrigendum 1
|
60.60
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 1: Requirements for testing and marking of separation efficiency
|
95.99
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Requirements, testing and marking of equipment for air filtration — Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles
|
95.99
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: General requirements
|
95.99
|
ISO/TC 44/SC 9
|
Health and safety in welding — Guidelines for risk assessment of welding fabrication activities
|
90.93
|
IIW
|
Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 1: General requirements
|
60.60
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 2: Requirements for testing and marking of separation efficiency
|
60.60
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Requirements, testing and marking of equipment for air filtration — Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices
|
60.60
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: Determination of the minimum air volume flow rate of capture devices
|
60.60
|
ISO/TC 44/SC 9
|
Industrial furnaces and associated processing equipment — Safety requirements for steel converter and associated equipment
|
60.60
|
ISO/TC 244
|
Radiological protection — Radiological monitoring for emergency workers and population following nuclear/radiological incidents — Part 1: General principles
|
30.99
|
ISO/TC 85/SC 2
|
Welding and allied processes — Vocabulary — Part 2: Health and safety
|
50.00
|
ISO/TC 44/SC 7
|
Health and safety in welding and allied processes — Transparent welding curtains, strips and screens for arc welding processes
|
90.92
|
ISO/TC 44/SC 9
|
Health and safety in welding and allied processes — Transparent welding curtains, strips and screens for arc welding processes
|
40.00
|
ISO/TC 44/SC 9
|
Occupational health and safety management systems — Requirements with guidance for use
|
90.60
|
ISO/TC 283
|
Occupational health and safety management systems — General guidelines for the implementation of ISO 45001:2018
|
40.60
|
ISO/TC 283
|
Occupational health and safety management — Psychological health and safety at work — Guidelines for managing psychosocial risks
|
60.60
|
ISO/TC 283
|
Occupational health and safety management — General guidelines for safe working during the COVID-19 pandemic
|
60.60
|
ISO/TC 283
|
Additive manufacturing of metals — Environment, health and safety — General principles for use of metallic materials
|
40.99
|
ISO/TC 261
|
Additive manufacturing of polymers — Environment, health and safety — Test method for the determination of particle emission rates from desktop ME printers
|
30.98
|
ISO/TC 261
|