• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 138/SC 6 Секретариата Этап ICS
ISO 7370:1983
Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings — Nominal diameters, specified diameters and standard lengths
95.99
ISO 7432:2002
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
95.99
ISO 7432:2018
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
90.92
ISO/NP 7432
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
10.99
ISO 7509:2000
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure
95.99
ISO 7509:2015
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure
60.60
ISO 7510:1997
Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents using the gravimetric method
95.99
ISO 7510:2017
Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents
60.60
ISO 7511:1999
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the leaktightness of the wall under short-term internal pressure
90.93
ISO 7684:1997
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the creep factor under dry conditions
90.99
ISO 7685:1998
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial specific ring stiffness
95.99
ISO 7685:2019
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness
60.60
ISO 8483:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints
95.99
ISO 8483:2003/Amd 1:2012
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints — Amendment 1
95.99
ISO 8483:2019
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints
60.60
ISO 8513:2000
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of longitudinal tensile properties
95.99
ISO 8513:2014
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength
95.99
ISO 8513:2016
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
60.60
ISO 8521:1998
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the apparent initial circumferential tensile strength
95.99
ISO 8521:2009
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the apparent initial circumferential tensile strength
90.92
ISO/DIS 8521
Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
40.60
ISO 8533:2003
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints
95.99
ISO 8533:2003/Amd 1:2012
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints — Amendment 1
95.99
ISO 8533:2019
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of cemented or wrapped joints
60.60
ISO 8572:1991
Pipes and fittings made of glass-reinforced thermosetting plastics (GRP) — Definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing
95.99
ISO 8639:2000
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness of flexible joints
95.99
ISO 8639:2016
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints
60.60
ISO/TR 10465-1:1993
Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes — Part 1: Installation procedures
95.99
ISO/TR 10465-2:1999
Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes — Part 2: Comparison of static calculation methods
95.99
ISO/TR 10465-2:2007
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) — Part 2: Comparison of static calculation methods
90.93
ISO/TR 10465-3:1999
Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes — Part 3: Installation parameters and application limits
95.99
ISO/TR 10465-3:2007
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) — Part 3: Installation parameters and application limits
90.93
ISO/TS 10465-1:2007
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) — Part 1: Installation procedures
90.93
ISO 10466:1997
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection
90.92
ISO/CD 10466
Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection
30.99
ISO 10467:2004
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
95.99
ISO 10467:2004/Amd 1:2012
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1
95.99
ISO 10467:2018
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
60.60
ISO 10468:2003
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor
95.99
ISO 10468:2003/Amd 1:2010
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor — Amendment 1
95.99
ISO 10468:2018
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
60.60
ISO 10471:2003
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
95.99
ISO 10471:2003/Amd 1:2010
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions — Amendment 1
95.99
ISO 10471:2018
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
60.60
ISO 10639:2004
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
95.99
ISO 10639:2004/Amd 1:2011
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1
95.99
ISO 10639:2017
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
60.60
ISO 10928:1997
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
95.99
ISO 10928:2009
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
95.99
ISO 10928:2009/Amd 1:2013
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use — Amendment 1
95.99
ISO 10928:2016
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
60.60
ISO 10952:1999
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack from the inside of a section in a deflected condition
95.99
ISO 10952:2008
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
95.99
ISO 10952:2014
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
90.92
ISO/CD 10952
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
30.99
ISO/WD TS 10986
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — System design of above ground pipe and joint installations without end thrust
20.20
ISO/TS 12512:2017
Glass reinforced thermosetting plastic (GRP) pipes — Determination of initial specific ring stiffness using segment test species cut from a pipe
60.60
ISO 14828:2003
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
95.99
ISO 14828:2003/Amd 1:2010
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor — Amendment 1
95.99
ISO 15306:2003
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal pressure
90.93
ISO 15306:2003/Amd 1:2012
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal pressure — Amendment 1
60.60
ISO 16611:2017
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
60.60
ISO 18672-1:2009
Plastics piping systems for non-pressure drainage and sewerage — Polyester resin concrete (PRC) — Part 1: Pipes and fittings with flexible joints
90.93
ISO 18851:2015
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test method to prove the structural design of fittings
60.60
ISO/TS 20656-1:2017
Plastics piping systems — General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes — Part 1: Buried pipes
60.60
ISO/DIS 23856
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
40.60
ISO 25780:2011
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques
90.92

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.