• Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 61/SC 11 Секретариата Этап ICS
ISO 527-3:1995
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
95.99
ISO 527-3:1995/Cor 2:2001
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets — Technical Corrigendum 2
95.99
ISO 527-3:2018
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
60.60
ISO 1184:1983
Plastics — Determination of tensile properties of films
95.99
ISO 1642:1987
Plastics — Industrial laminated sheets based on thermosetting resins — Specification
95.99
ISO 4578:1990
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating roller method
95.99
ISO 4578:1997
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
90.93
ISO 4586-1:1981
Plastics — Decorative laminated sheets based on thermosetting resins — Part 1: Specification
95.99
ISO 4586-1:1987
Decorative high-pressure laminates (HPL) — Sheets based on thermosetting resins — Part 1: Specification
95.99
ISO 4586-1:1995
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications
95.99
ISO 4586-1:1997
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications
95.99
ISO 4586-1:1997/Amd 3:2002
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications — Amendment 3: Lightfastness
95.99
ISO 4586-1:2004
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications
95.99
ISO 4586-1:2015
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 1: Introduction and general information
95.99
ISO 4586-1:2018
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 1: Introduction and general information
60.60
ISO 4586-2:1981
Plastics — Decorative laminated sheets based on thermosetting resins — Part 2: Determination of properties
95.99
ISO 4586-2:1988
Decorative high-pressure laminates (HPL) — Sheets based on thermosetting resins — Part 2: Determination of properties
95.99
ISO 4586-2:1995
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
95.99
ISO 4586-2:1997
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
95.99
ISO 4586-2:1997/Amd 3:2002
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 3: Lightfastness
95.99
ISO 4586-2:1997/Amd 4:2000
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 4: Resistance to surface wear
95.99
ISO 4586-2:1997/Amd 5:2002
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 5: Resistance to scratching
95.99
ISO 4586-2:1997/Amd 6:2003
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 6: Resistance to wet heat
95.99
ISO 4586-2:1997/Amd 7:2002
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 7: Stain resistance and cleanability
95.99
ISO 4586-2:1997/Amd 8:2002
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 8: Dimensional stability
95.99
ISO 4586-2:2004
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
95.99
ISO 4586-2:2015
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 2: Determination of properties
95.99
ISO 4586-2:2018
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 2: Determination of properties
60.60
ISO 4586-3:2015
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
95.99
ISO 4586-3:2018
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
60.60
ISO 4586-4:2015
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
95.99
ISO 4586-4:2018
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
60.60
ISO 4586-5:2015
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
95.99
ISO 4586-5:2018
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
60.60
ISO 4586-6:2015
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
95.99
ISO 4586-6:2018
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
60.60
ISO 4586-7:2015
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Classification and specifications for design laminates
95.99
ISO 4586-7:2018
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 7: Classification and specifications for design laminates
60.60
ISO 4586-8:2015
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 8: Classification and specifications for alternative core laminates
95.99
ISO 4586-8:2018
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 8: Classification and specifications for alternative core laminates
60.60
ISO 4587:1979
Adhesives — Determination of tensile lap-shear strength of high strength adhesive bonds
95.99
ISO 4587:1995
Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
95.99
ISO 4587:2003
Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
90.93
ISO 4588:1989
Adhesives — Preparation of metal surfaces for adhesive bonding
95.99
ISO 4588:1995
Adhesives — Guidelines for the surface preparation of metals
95.99
ISO 4591:1979
Plastics — Film and sheeting — Determination of average thickness of a sample and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
95.99
ISO 4591:1992
Plastics — Film and sheeting — Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
90.93
ISO 4592:1979
Plastics — Film and sheeting — Determination of length and width
95.99
ISO 4592:1992
Plastics — Film and sheeting — Determination of length and width
90.93
ISO 4593:1979
Plastics — Film and sheeting — Determination of thickness by mechanical scanning
95.99
ISO 4593:1993
Plastics — Film and sheeting — Determination of thickness by mechanical scanning
90.93
ISO 6237:1987
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading
95.99
ISO 6237:2003
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading
95.99
ISO 6237:2017
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading
60.60
ISO 6238:1987
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compression loading
95.99
ISO 6238:2001
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compressive loading
95.99
ISO 6238:2018
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compressive loading
60.60
ISO 6383-1:1983
Plastics — Film and sheeting — Determination of tear resistance — Part 1: Trouser tear method
95.99
ISO 6383-1:2015
Plastics — Film and sheeting — Determination of tear resistance — Part 1: Trouser tear method
60.60
ISO 6383-2:1983
Plastics — Film and sheeting — Determination of tear resistance — Part 2: Elmendorf method
90.93
ISO 6922:1987
Adhesives — Determination of tensile strength of butt joints
95.99
ISO 7765-1:1988
Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 1: Staircase methods
90.93
ISO 7765-2:1994
Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test
90.93
ISO 7823-1:1987
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
95.99
ISO 7823-1:1991
Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
95.99
ISO 7823-1:1998
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
95.99
ISO 7823-1:2003
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
90.93
ISO 7823-2:1989
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets
95.99
ISO 7823-2:1989/Cor 1:1991
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets — Technical Corrigendum 1
95.99
ISO 7823-2:1996
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets
95.99
ISO 7823-2:2003
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets
90.93
ISO 7823-3:2003
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets
95.99
ISO 7823-3:2007
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets
90.93
ISO 8295:1986
Plastics — Film and sheeting — Determination of the coefficients of friction
95.99
ISO 8295:1995
Plastics — Film and sheeting — Determination of the coefficients of friction
90.93
ISO 8296:1987
Plastics — Film and sheeting — Determination of wetting tension
95.99
ISO 8296:1987/Cor 1:1998
Plastics — Film and sheeting — Determination of wetting tension — Technical Corrigendum 1
95.99
ISO 8296:2003
Plastics — Film and sheeting — Determination of wetting tension
90.93
ISO 8510-1:1990
Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 1: 90 degree peel
95.99
ISO 8510-2:1990
Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 180 degree peel
95.99
ISO 8510-2:2006
Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 180 degree peel
90.93
ISO 8570:1991
Plastics — Film and sheeting - Determination of cold-crack temperature
90.93
ISO 9142:1990
Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints
95.99
ISO 9142:1990/Cor 1:1995
Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints — Technical Corrigendum 1
95.99
ISO 9142:2003
Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints
90.93
ISO 9653:1991
Adhesives — Test method for shear impact strength of adhesive bonds
95.99
ISO 9653:1998
Adhesives — Test method for shear impact strength of adhesive bonds
90.93
ISO 9664:1993
Adhesives — Test methods for fatigue properties of structural adhesives in tensile shear
90.93
ISO 9665:1993
Adhesives — Animal glues — Methods for sampling and testing
95.99
ISO 9665:1998
Adhesives — Animal glues — Methods of sampling and testing
90.93
ISO 10123:1990
Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
95.99
ISO 10123:2013
Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
90.93
ISO 10354:1992
Adhesives — Characterization of durability of structural-adhesive-bonded assemblies — Wedge rupture test
90.93
ISO 10363:1992
Hot-melt adhesives — Determination of thermal stability
90.93
ISO 10364:1993
Adhesives — Determination of working life (pot life) of multi-component adhesives
95.99
ISO 10364:2007
Structural adhesives — Determination of the pot life (working life) of multi-component adhesives
95.99
ISO 10364:2015
Structural adhesives — Determination of the pot life (working life) of multi-component adhesives
60.60
ISO 10365:1992
Adhesives — Designation of main failure patterns
90.93
ISO 10964:1993
Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners
90.93
ISO 11003-1:1993
Adhesives — Determination of shear behaviour of structural bonds — Part 1: Torsion test method using butt-bonded hollow cylinders
95.99
ISO 11003-1:2001
Adhesives — Determination of shear behaviour of structural adhesives — Part 1: Torsion test method using butt-bonded hollow cylinders
95.99
ISO 11003-1:2019
Adhesives — Determination of shear behaviour of structural adhesives — Part 1: Torsion test method using butt-bonded hollow cylinders
60.60
ISO 11003-2:1993
Adhesives — Determination of shear behaviour of structural bonds — Part 2: Thick-adherend tensile-test method
95.99
ISO 11003-2:2001
Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends
95.99
ISO 11003-2:2019
Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends
60.60
ISO 11339:1993
Adhesives — 180 degree peel test for flexible-to-flexible bonded assemblies (T-peel test)
95.99
ISO 11339:2003
Adhesives — T-peel test for flexible-to-flexible bonded assemblies
95.99
ISO 11339:2010
Adhesives — T-peel test for flexible-to-flexible bonded assemblies
90.93
ISO 11343:1993
Adhesives — Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions — Wedge impact method
95.99
ISO 11343:2003
Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions — Wedge impact method
95.99
ISO 11343:2019
Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions — Wedge impact method
60.60
ISO 11501:1995
Plastics — Film and sheeting — Determination of dimensional change on heating
90.93
ISO 11502:1995
Plastics — Film and sheeting — Determination of blocking resistance
95.99
ISO 11502:2018
Plastics — Film and sheeting — Determination of blocking resistance
60.60
ISO 11833-1:1998
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm
95.99
ISO 11833-1:2007
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm
95.99
ISO 11833-1:2012
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm
95.99
ISO 11833-1:2019
Plastics — Unplasticized poly(vinyl chloride) sheets — Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm
60.60
ISO 11833-2:1998
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 2: Sheets of thickness less than 1 mm
90.93
ISO 11963:1995
Plastics — Polycarbonate sheets — Types, dimensions and characteristics
95.99
ISO 11963:2012
Plastics — Polycarbonate sheets — Types, dimensions and characteristics
95.99
ISO 11963:2019
Plastics — Polycarbonate sheets — Types, dimensions and characteristics
60.60
ISO 12017:1995
Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods
90.93
ISO 13106:2014
Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffs
90.60
ISO 13445:1995
Adhesives — Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
95.99
ISO 13445:2003
Adhesives — Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
90.93
ISO 13636:2012
Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets
90.93
ISO 13894-1:2000
High-pressure decorative laminates — Composite elements — Part 1: Test methods
90.93
ISO 13894-2:2005
High-pressure decorative laminates — Composite elements — Part 2: Specifications for composite elements with wood-based substrates for interior use
90.93
ISO 13895:1996
Adhesives — Guidelines for the surface preparation of plastics
95.99
ISO 14615:1997
Adhesives — Durability of structural adhesive joints — Exposure to humidity and temperature under load
90.93
ISO 14616:1997
Plastics — Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures — Determination of shrinkage stress and contraction stress
90.93
ISO 14631:1999
Extruded sheets of impact-modified polystyrene (PS-I) — Requirements and test methods
90.93
ISO 14632:1998
Extruded sheets of polyethylene (PE-HD) — Requirements and test methods
90.93
ISO 14676:1997
Adhesives — Evaluation of the effectiveness of surface treatment techniques for aluminium — Wet-peel test by floating-roller method
90.93
ISO 14678:2005
Adhesives — Determination of resistance to flow (sagging)
90.93
ISO 14679:1997
Adhesives — Measurement of adhesion characteristics by a three-point bending method
90.93
ISO 15013:1998
Extruded sheets of polypropylene (PP) — Requirements and test methods
95.99
ISO 15013:2007
Plastics — Extruded sheets of polypropylene (PP) — Requirements and test methods
90.93
ISO 15014:2007
Plastics — Extruded sheets of poly(vinylidene fluoride) (PVDF) — Requirements and test methods
90.93
ISO 15015:2007
Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods
95.99
ISO 15015:2011
Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods
90.93
ISO 15105-1:2002
Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure method
95.99
ISO 15105-1:2007
Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure methods
90.93
ISO 15105-2:2003
Plastics — Film and sheeting — Determination of gas-transmission rate — Part 2: Equal-pressure method
90.93
ISO 15106-1:2003
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 1: Humidity detection sensor method
90.93
ISO 15106-2:2003
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 2: Infrared detection sensor method
90.93
ISO 15106-3:2003
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 3: Electrolytic detection sensor method
90.93
ISO 15106-4:2008
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 4: Gas-chromatographic detection sensor method
90.93
ISO 15106-5:2015
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 5: Pressure sensor method
60.60
ISO 15106-6:2015
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 6: Atmospheric pressure ionization mass spectrometer method
60.60
ISO 15106-7:2015
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 7: Calcium corrosion method
60.60
ISO 15107:1998
Adhesives — Determination of cleavage strength of bonded joints
90.93
ISO 15108:1998
Adhesives — Determination of strength of bonded joints using a bending-shear method
90.93
ISO 15109:1998
Adhesives — Determination of the time to rupture of bonded joints under static load
90.93
ISO 15166-1:1998
Adhesives — Methods of preparing bulk specimens — Part 1: Two-part systems
90.93
ISO 15166-2:2000
Adhesives — Methods of preparing bulk specimens — Part 2: Elevated-temperature-curing one-part systems
90.93
ISO 15509:2001
Adhesives — Determination of the bond strength of engineering-plastic joints
95.99
ISO 15509:2019
Adhesives — Determination of the bond strength of engineering-plastic joints
60.60
ISO 15527:2007
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
95.99
ISO 15527:2010
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
95.99
ISO 15527:2018
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
60.60
ISO 15605:2000
Adhesives — Sampling
90.93
ISO 15987:2003
Plastics — Film and sheeting — Biaxially oriented polyamide (nylon) films
90.93
ISO 15988:2003
Plastics — Film and sheeting — Biaxially oriented poly(ethylene terephthalate) (PET) films
90.93
ISO 15989:2004
Plastics — Film and sheeting — Measurement of water-contact angle of corona-treated films
90.93
ISO 15989:2004/Cor 1:2007
Plastics — Film and sheeting — Measurement of water-contact angle of corona-treated films — Technical Corrigendum 1
60.60
ISO 16525-1:2014
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 1: General test methods
90.60
ISO 16525-2:2014
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 2: Determination of electrical characteristics for use in electronic assemblies
90.60
ISO 16525-3:2014
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 3: Determination of heat-transfer properties
90.60
ISO 16525-4:2014
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
90.60
ISO 16525-5:2014
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 5: Determination of shear fatigue
90.60
ISO 16525-6:2014
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 6: Determination of pendulum-type shear impact
90.60
ISO 16525-7:2014
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 7: Environmental test methods
90.60
ISO 16525-8:2014
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 8: Electrochemical-migration test methods
90.60
ISO 16525-9:2014
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 9: Determination of high-speed signal-transmission characteristics
90.60
ISO 16616:2015
Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
60.60
ISO 17087:2006
Specifications for adhesives used for finger joints in non-structural lumber products
90.93
ISO 17178:2013
Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum requirements
90.93
ISO 17194:2007
Structural adhesives — A standard database of properties
90.93
ISO 17212:2004
Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
95.99
ISO 17212:2012
Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
90.93
ISO 17555:2003
Plastics — Film and sheeting — Biaxially oriented polypropylene (PP) films
90.93
ISO 17557:2003
Plastics — Film and sheeting — Cast polypropylene (PP) films
90.93
ISO 18188:2016
Specification of polypropylene drinking straws
60.60
ISO 19095-1:2015
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 1: Guidelines for the approach
60.60
ISO 19095-2:2015
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 2: Test specimens
60.60
ISO 19095-3:2015
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 3: Test methods
60.60
ISO 19095-4:2015
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 4: Environmental conditions for durability
60.60
ISO/CD 19095-6
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 6: Accelerated degradation test
30.99
ISO/DIS 19095-5
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 5: Fracture energy
40.99
ISO 19209:2017
Adhesives — Classification of thermoplastic wood adhesives for non-structural applications
60.60
ISO 19210:2017
Adhesives — Wood adhesives for non-structural applications — Determination of tensile shear strength of lap joints
60.60
ISO 19212:2006
Adhesives — Determination of temperature dependence of shear strength
90.93
ISO 19699-1:2017
Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods
60.60
ISO 19699-2:2017
Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 2: Specifications
60.60
ISO 19712-1:2008
Plastics — Decorative solid surfacing materials — Part 1: Classification and specifications
90.93
ISO 19712-2:2007
Plastics — Decorative solid surfacing materials — Part 2: Determination of properties — Sheet goods
90.93
ISO 19712-3:2007
Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes
90.93
ISO 19821:2017
Determination of span rating for natural fibre-reinforced plastic composite (NFC) deck boards
60.60
ISO 20819:2018
Plastics — Wood-plastic recycled composites (WPRC) — Specification
90.92
ISO/DIS 20819
Plastics — Wood-plastic recycled composites (WPRC) — Specification
40.60
ISO 21194:2019
Elastic adhesives — Testing of adhesively bonded joints — Bead peel test
60.60
ISO 21368:2005
Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
90.92
ISO/CD 21368
Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
30.99
ISO 21760-1:2019
Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 1: Adhesive film preparation methods
60.60
ISO 21760-2:2019
Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 2: Edge seal methods
60.60
ISO 22631:2019
Adhesives — Test methods for adhesives for floor and wall coverings — Peel test
60.60
ISO 22632:2019
Adhesives — Test methods for adhesives for floor and wall coverings — Shear test
60.60
ISO 22633:2019
Adhesives — Test methods for adhesives for floor coverings and wall coverings — Determination of the dimensional changes of a linoleum floor covering in contact with an adhesive
60.60
ISO 22635:2019
Adhesives — Test methods for adhesives for plastic or rubber floor coverings or wall coverings — Determination of dimensional changes after accelerated ageing
60.60
ISO/DIS 22636
Adhesives — Adhesives for floor coverings — Requirements for mechanical and electrical performance
40.20
ISO 22637:2019
Adhesives — Test of adhesive for floor covering — Determination of the electrical resistance of adhesive films and composites
60.60
ISO 23559:2007
Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
95.99
ISO 23559:2011
Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
90.93
ISO 23560:2008
Woven polypropylene sacks for bulk packaging of foodstuffs
95.99
ISO 23560:2015
Woven polypropylene sacks for bulk packaging of foodstuffs
60.60
ISO 25179:2010
Adhesives — Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
95.99
ISO 25179:2018
Adhesives — Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
60.60
ISO 26842-1:2009
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments
95.99
ISO 26842-1:2013
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments
90.92
ISO 26842-2:2009
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments
95.99
ISO 26842-2:2013
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments
90.92
ISO/DIS 26842-1
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments
40.60
ISO/DIS 26842-2
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments
40.60
ISO 29862:2007
Self adhesive tapes — Determination of peel adhesion properties
95.99
ISO 29862:2018
Self adhesive tapes — Determination of peel adhesion properties
60.60
ISO 29863:2007
Self adhesive tapes — Measurement of static shear adhesion
95.99
ISO 29863:2018
Self adhesive tapes — Measurement of static shear adhesion
60.60
ISO 29864:2007
Self adhesive tapes — Measurement of breaking strength and elongation at break
95.99
ISO 29864:2018
Self adhesive tapes — Measurement of breaking strength and elongation at break
60.60

По запросу ничего не найдено