Подкомитет Заголовок подкомитета Опубликованные стандарты Стандарты, находящиеся на стадии разработки
ISO/TC 20/SC 1 Aerospace electrical requirements 62 118
ISO/TC 20/SC 4 Aerospace fastener systems 92 12
ISO/TC 20/SC 6 Standard atmosphere 8 3
ISO/TC 20/SC 8 Aerospace terminology 22 1
ISO/TC 20/SC 9 Air cargo and ground equipment 67 9
ISO/TC 20/SC 10 Aerospace fluid systems and components 82 8
ISO/TC 20/SC 13 Space data and information transfer systems 84 20
ISO/TC 20/SC 14 Space systems and operations 169 45
ISO/TC 20/SC 16 Unmanned aircraft systems 0 8
ISO/TC 20/SC 18 Materials 6 2
  • Фильтр:

  •  
  •  
  •  
  •  
Стандарт и/или проект находящийся в компетенции ISO/TC 20 Секретариата Этап ICS
ISO/R 10:1955
Withdrawal of ISO/R 10-1955
95.99
ISO 44:1975
Aerospace — Lever-operated, two-position, ON/OFF switches — Directions of operation
90.93
ISO/R 47:1957
Withdrawal of ISO/R 47-1957
95.99
ISO/R 103:1959
Withdrawal of ISO/R 103-1959
95.99
ISO/R 130:1959
Withdrawal of ISO/R 130-1959
95.99
ISO/R 222:1968
Withdrawal of ISO/R 222-1961
95.99
ISO 223:1975
Withdrawal of ISO 223-1975
95.99
ISO/TR 224:1998
Aircraft — Declaration of design and performance for aircraft equipment — Standard form
95.99
ISO 244:1979
Aircraft — Sealing wire
90.93
ISO/R 267:1962
Withdrawal of ISO/R 267-1962
95.99
ISO 268:1980
Aircraft — Mechanical and electromechanical indicators — General requirements
90.93
ISO 413:1974
Aircraft — Heads of lubricating nipples
90.93
ISO/R 414:1965
Withdrawal of ISO/R 414-1965
95.99
ISO/R 440:1969
Withdrawal of ISO/R 440-1969
95.99
ISO/R 443:1965
Marking of aircraft gas cylinders
95.99
ISO/R 469:1966
Withdrawal of ISO/R 469-1966
95.99
ISO/R 470:1966
Withdrawal of ISO/R 470-1966
95.99
ISO/R 474:1966
Withdrawal of ISO/R 474-1966
95.99
ISO 482:1977
Aircraft — Propulsion units and components — Methods of numbering and describing direction of rotation
90.93
ISO/R 539:1967
Withdrawal of ISO/R 539-1967
95.99
ISO/R 564:1967
Withdrawal of ISO/R 564-1967
95.99
ISO/R 634:1967
Withdrawal of ISO/R 634-1964
95.99
ISO/R 854:1968
Withdrawal of ISO/R 854-1968
95.99
ISO 1002:1983
Rolling bearings — Airframe bearings — Characteristics, boundary dimensions, tolerances, static load ratings
90.93
ISO 1021:1980
Aircraft — Engine nacelle fire extinguisher apertures and doors
90.93
ISO/R 1075:1969
Withdrawal of ISO/R 1075-1969
95.99
ISO/R 1076:1969
Withdrawal of ISO/R 1076-1969
95.99
ISO/R 1077:1969
Withdrawal of ISO/R 1077-1969
95.99
ISO/R 1078:1969
Withdrawal of ISO/R 1078-1969
95.99
ISO 1151-1:1985
Flight dynamics — Concepts, quantities and symbols — Part 1: Aircraft motion relative to the air
95.99
ISO 1151-2:1974
Terms and symbols for flight dynamics — Part 2: Motions of the aircraft and the atmosphere relative to the Earth
95.99
ISO 1151-3:1972
Terms and symbols for flight dynamics — Part 3: Derivatives of forces, moments and their coefficients
95.99
ISO 1151-4:1974
Terms and symbols for flight dynamics — Part 4: Concepts, quantities and symbols used in the study of aircraft stability and control
95.99
ISO 1151-4:1974/Add 1:1986
Terms and symbols for flight dynamics — Part 4: Concepts, quantities and symbols used in the study of aircraft stability and control — Addendum 1
95.99
ISO 1151-5:1974
Terms and symbols for flight dynamics — Part 5: Quantities used in measurements
95.99
ISO 1151:1972
Withdrawal of ISO 1151-1975
95.99
ISO 1152:1974
Withdrawal of ISO 1152-1974
95.99
ISO 1153:1972
Withdrawal of ISO 1153-1972
95.99
ISO/R 1220:1970
Withdrawal of ISO/R 1220-1970
95.99
ISO 1464:1979
Aircraft — Clearance dimensions for tripod jacks
95.99
ISO/R 1468:1970
Withdrawal of ISO/R 1468-1970
95.99
ISO/R 1490:1970
Withdrawal of ISO/R 1490-1970
95.99
ISO/R 1491:1970
Withdrawal of ISO/R 1491-1970
95.99
ISO 1540:1977
Aerospace — Characteristics of aircraft electrical systems
95.99
ISO/R 1799:1971
Withdrawal of ISO/R 1799-1971
95.99
ISO/R 1800:1971
Withdrawal of ISO/R 1800-1971
95.99
ISO 1963:1973
Withdrawal of ISO 1963-1973
95.99
ISO 1971:1975
Aircraft — Accessory drives and mounting pads
90.93
ISO 2020-1:1997
Aerospace — Preformed flexible steel wire rope for aircraft controls — Part 1: Dimensions and loads
90.93
ISO 2020-2:1997
Aerospace — Preformed flexible steel wire rope for aircraft controls — Part 2: Technical specification
90.93
ISO 2020:1973
Flexible steel wire rope for aircraft controls — Technical specification
95.99
ISO 2020:1984
Aerospace — Mechanical system parts — Preformed flexible steel wire rope for aircraft controls — Technical specification
95.99
ISO 2529:1973
Aircraft — Zones, access doors and panels — Referencing system
95.99
ISO 2650:1974
Withdrawal of ISO 2650-1974
95.99
ISO 2653-1:1975
Environmental tests for aircraft equipment — Part 1: Ice formation
95.99
ISO 2655:1975
Withdrawal of ISO 2655-1975
95.99
ISO 2657:1976
Withdrawal of ISO 2657-1976
95.99
ISO 2658:1975
Withdrawal of ISO 2658-1975
95.99
ISO 2669-1:1978
Environmental tests for aircraft equipment — Part 1: Steady state acceleration
95.99
ISO 2669:1995
Environmental tests for aircraft equipment — Steady-state acceleration
90.93
ISO 2671:1982
Environmental tests for aircraft equipment — Part 3.4 : Acoustic vibration
90.93
ISO 2676:1975
Withdrawal of ISO 2676-1975
95.99
ISO 2678-1:1977
Environmental tests for aircraft equipment — Part 1: Insulation resistance and high voltage tests for electrical equipment
95.99
ISO 2684:1975
Withdrawal of ISO 2684-1975
95.99
ISO 2685:1992
Aircraft — Environmental conditions and test procedures for airborne equipment — Resistance to fire in designated fire zones
95.99
ISO 2685:1998
Aircraft — Environmental test procedure for airborne equipment — Resistance to fire in designated fire zones
90.93
ISO/TR 2685:1984
Aircraft — Environmental conditions and test procedures for airborne equipment — Resistance to fire in designated fire zones
95.99
ISO 2764:1974
Withdrawal of ISO 2764-1974
95.99
ISO 2765:1974
Withdrawal of ISO 2765-1974
95.99
ISO 2964:1974
Aircraft — Tubing outside diameters and thicknesses — Metric dimensions
95.99
ISO 4153:1981
Aircraft — Pressure fuel dispensing system — Test procedure and limit value for shut-off surge pressure
90.93
ISO 7137:1981
Aircraft — Environmental conditions and test procedures for airborne equipment
95.99
ISO 7137:1987
Aircraft — Environmental conditions and test procedures for airborne equipment
95.99
ISO 7137:1992
Aircraft — Environmental conditions and test procedures for airborne equipment
95.99
ISO 7137:1995
Aircraft — Environmental conditions and test procedures for airborne equipment
90.93
ISO 7938:1986
Aircraft — Ball bearings for control cable pulleys — Dimensions and loads
90.93
ISO 7939:1988
Aircraft — Non-metallic pulleys with ball bearings for control cables — Dimensions and loads
90.20
ISO 8076:1984
Aerospace process — Anodic treatment of aluminium alloys — Chromic acid process 40 V DC, undyed coating
95.99
ISO 8077:1984
Aerospace process — Anodic treatment of aluminium alloys — Chromic acid process 20 V DC, undyed coating
95.99
ISO 8399-1:1998
Aerospace — Accessory drives and mounting flanges (Metric series) — Part 1: Design criteria
90.93
ISO 8399-2:1998
Aerospace — Accessory drives and mounting flanges (Metric series) — Part 2: Dimensions
90.93
ISO 8591-1:1989
Aerospace — Wrought aluminium and aluminium alloys — Inspection, testing and supply requirements — Part 1: General requirements
90.93
ISO 9216:2002
Aerospace — Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses
90.93
ISO 9217:2002
Aerospace — Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses
90.93
ISO 9218:2002
Aerospace — Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses
90.93
ISO 9219:2002
Aerospace — Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated — Dimensions and masses
90.93
ISO 9736:2000
Aerospace — Eye-ends, in steel, threaded, for aircraft control wire rope — Dimensions and loads
90.93
ISO 9737:2000
Aerospace — Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
90.93
ISO 9738:2000
Aerospace — Turnbarrels, for aircraft control wire rope — Dimensions and loads
90.93
ISO 9747:2000
Aerospace — Double-shank ball-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope — Dimensions and loads
90.93
ISO 9748:2000
Aerospace — Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
90.93
ISO 9749:2000
Aerospace — Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
90.93
ISO 9757:2000
Aerospace — Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels — Dimensions and loads
90.93
ISO 9758:2000
Aerospace — Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope — Dimensions and loads
90.93
ISO 9759:2000
Aerospace — Fork-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope — Dimensions and loads
90.93
ISO 9760:2000
Aerospace — Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope for rolling bearings — Dimensions and loads
90.93
ISO 9761:2000
Aerospace — Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles — Dimensions
90.93
ISO 9762:2000
Aerospace — Aircraft control wire rope assemblies — Dimensions and end-fitting combinations
90.93
ISO 9763:1999
Aerospace — Aircraft control wire rope assemblies — Technical specification
90.93
ISO/TR 10201:1989
Aerospace — Standards for electronic instruments and systems
95.99
ISO/TR 10201:1991
Aerospace — Standards for electronic instruments and systems
95.99
ISO/TR 10201:1996
Aerospace — Standards for electronic instruments and systems
95.99
ISO/TR 10201:2001
Aerospace — Standards for electronic instruments and systems
95.99
ISO 10792-1:1995
Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 1: Metric series
90.93
ISO 10792-2:1995
Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 2: Inch series
90.93
ISO 10792-3:1995
Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 3: Technical specification
90.93
ISO 10955:1999
Aerospace — End-fittings and turnbarrels for aircraft control wire rope — Technical specification
90.93
ISO 13411:1997
Aerospace — Airframe needle roller, cylindrical roller and track roller bearings — Technical specification
90.93
ISO 13412:1997
Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Inch series
90.93
ISO 13413:1997
Aerospace — Airframe needle track roller, yoke type, double-row, sealed — Inch series
90.93
ISO 13414:1997
Aerospace — Airframe needle roller bearings, single-row, shielded — Inch series
90.20
ISO 13415:1997
Aerospace — Airframe needle track roller, stud type, single-row, sealed — Inch series
90.93
ISO 13416:1997
Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Metric series
90.93
ISO 13417:1997
Aerospace — Airframe needle track roller, stud type, single-row, sealed — Metric series
90.93
ISO 14190:1998
Aerospace — Airframe rolling bearings: ball and spherical roller bearings — Technical specification
90.20
ISO 14191:1998
Aerospace — Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 — Metric series
90.20
ISO 14192:1998
Aerospace — Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty — Metric series
90.20
ISO 14193:1998
Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring intermediate duty — Inch series
90.20
ISO 14194:1998
Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty — Inch series
90.20
ISO 14195:1998
Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty — Inch series
90.20
ISO 14196:1998
Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty — Inch series
90.20
ISO 14197:1998
Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty — Inch series
90.20
ISO 14201:1998
Aerospace — Airframe ball bearings, double-row, self-aligning, diameter series 2 — Metric series
90.20
ISO 14202:1998
Aerospace — Airframe ball bearings, single-row, rigid, diameter series 0 and 2 — Metric series
90.20
ISO 14203:1998
Aerospace — Airframe ball bearings, single-row, rigid, diameter series 8 and 9 — Metric series
90.20
ISO 14204:1998
Aerospace — Airframe ball bearings, double-row, rigid, diameter series 0 — Metric series
90.20
ISO 14206:1998
Aerospace — Airframe ball bearings, single-row, rigid, sealed, light duty — Inch series
90.20
ISO 14207:1998
Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, light duty — Inch series
90.20
ISO 14208:1998
Aerospace — Airframe ball bearings, single-row, rigid, sealed, intermediate duty — Inch series
90.20
ISO 14209:1998
Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty — Inch series
90.20
ISO 14210:1998
Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty — Inch series
90.20
ISO 14211:1998
Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty — Inch series
90.20
ISO 14212:1998
Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty — Inch series
90.20
ISO 14213:1998
Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra-light duty — Inch series
90.20
ISO 14214:1998
Aerospace — Airframe ball bearings, double-row, rigid, sealed, heavy duty — Inch series
90.20
ISO 14215:1998
Aerospace — Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty — Inch series
90.20
ISO 14216:1998
Aerospace — Airframe ball bearings, double-row, self-aligning, sealed, heavy duty — Inch series
90.20
ISO 14217:1998
Aerospace — Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty — Inch series
90.20
ISO 14218:1998
Aerospace — Airframe ball bearings, single-row, self-aligning, sealed, heavy duty — Inch series
90.20
ISO 14219:1998
Aerospace — Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty — Inch series
90.20
ISO 14220:1998
Aerospace — Airframe ball bearings, single-row, self-aligning, sealed, light duty — Inch series
90.20
ISO 14221:1998
Aerospace — Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty — Inch series
90.20
ISO 21849:2006
Aircraft and space — Industrial data — Product identification and traceability
90.92
ISO/CD 21849
Aircraft and space — Industrial data — Product identification and traceability
30.99
ISO/TS 21849:2003
Aircraft — Integrated data processing materials management — Bar coding
95.99

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.