Pipelines and its parts for external water conveyance systems, see 23.040.03
External water conveyance systems, see 93.025
  • Filter:

  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 559:1977
Welded or seamless steel tubes for water, sewage and gas
95.99 ISO/TC 5
ISO 559:1991
Steel tubes for water and sewage
95.99 ISO/TC 5/SC 1
ISO 1452-1:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General
90.93 ISO/TC 138/SC 2
ISO 1452-2:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 1452-3:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 1452-4:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves
90.93 ISO/TC 138/SC 2
ISO 1452-5:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO 2531:1998
Ductile iron pipes, fittings, accessories and their joints for water or gas applications
95.99 ISO/TC 5/SC 2
ISO 2531:2009
Ductile iron pipes, fittings, accessories and their joints for water applications
90.93 ISO/TC 5/SC 2
ISO 2531:2009/Cor 1:2010
Ductile iron pipes, fittings, accessories and their joints for water applications — Technical Corrigendum 1
60.60 ISO/TC 5/SC 2
ISO 3114:1977
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method
90.93 ISO/TC 138/SC 5
ISO 3822-1:1983
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement
95.99 ISO/TC 43/SC 2
ISO 3822-1:1999
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement
90.93 ISO/TC 43/SC 2
ISO 3822-1:1999/Amd 1:2008
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement — Amendment 1: Measurement uncertainty
60.60 ISO/TC 43/SC 2
ISO 3822-2:1984
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps
95.99 ISO/TC 43/SC 2
ISO 3822-2:1995
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps and mixing valves
90.93 ISO/TC 43/SC 2
ISO 3822-3:1984
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances
95.99 ISO/TC 43/SC 2
ISO 3822-3:1997
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances
95.99 ISO/TC 43/SC 2
ISO 3822-3:1997/Amd 1:2009
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances — Amendment 1
95.99 ISO/TC 43/SC 2
ISO 3822-3:2018
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances
60.60 ISO/TC 43/SC 2
ISO 3822-4:1985
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances
95.99 ISO/TC 43/SC 2
ISO 3822-4:1997
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances
90.60 ISO/TC 43/SC 2
ISO 4064-1:1977
Measurement of water flow in closed conduits — Meters for cold potable water — Part 1: Specification
95.99 ISO/TC 30
ISO 4064-1:1993
Measurement of water flow in closed conduits — Meters for cold potable water — Part 1: Specifications
95.99 ISO/TC 30/SC 7
ISO 4064-1:2005
Measurement of water flow in fully charged closed conduits — Meters for cold potable water and hot water — Part 1: Specifications
95.99 ISO/TC 30/SC 7
ISO 4064-1:2014
Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements
90.60 ISO/TC 30/SC 7
ISO 4064-2:1978
Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements
95.99 ISO/TC 30/SC 7
ISO 4064-2:1978/Add 1:1983
Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements — Addendum 1: Parallel and multiple meter operation
95.99 ISO/TC 30
ISO 4064-2:2001
Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements and selection
95.99 ISO/TC 30/SC 7
ISO 4064-2:2005
Measurement of water flow in fully charged closed conduits — Meters for cold potable water and hot water — Part 2: Installation requirements
95.99 ISO/TC 30/SC 7
ISO 4064-2:2014
Water meters for cold potable water and hot water — Part 2: Test methods
90.60 ISO/TC 30/SC 7
ISO 4064-3:1983
Measurement of water flow in closed conduits — Meters for cold potable water — Part 3: Test methods and equipment
95.99 ISO/TC 30/SC 7
ISO 4064-3:1999
Measurement of water flow in closed conduits — Meters for cold potable water — Part 3: Test methods and equipment
95.99 ISO/TC 30/SC 7
ISO 4064-3:2005
Measurement of water flow in fully charged closed conduits — Meters for cold potable water and hot water — Part 3: Test methods and equipment
95.99 ISO/TC 30/SC 7
ISO 4064-3:2014
Water meters for cold potable water and hot water — Part 3: Test report format
90.60 ISO/TC 30/SC 7
ISO 4064-4:2014
Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1
90.60 ISO/TC 30/SC 7
ISO 4064-5:2014
Water meters for cold potable water and hot water — Part 5: Installation requirements
90.60 ISO/TC 30/SC 7
ISO/TR 4191:1989
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply — Recommended practice for laying
95.99 ISO/TC 138/SC 2
ISO/TR 4191:2014
Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation
60.60 ISO/TC 138/SC 2
ISO 4422-1:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 1: General
95.99 ISO/TC 138/SC 2
ISO 4422-2:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 2: Pipes (with or without integral sockets)
95.99 ISO/TC 138/SC 2
ISO 4422-3:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 3: Fittings and joints
95.99 ISO/TC 138/SC 2
ISO 4422-4:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 4: Valves and ancillary equipment
95.99 ISO/TC 138/SC 2
ISO 4422-5:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 4422:1990
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications
95.99 ISO/TC 138/SC 2
ISO 4422:1990/Amd 1:1992
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Amendment 1
95.99 ISO/TC 138/SC 2
ISO 4427-1:2007
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
95.99 ISO/TC 138/SC 2
ISO 4427-1:2007/Amd 1:2015
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
95.99 ISO/TC 138/SC 2
ISO 4427-1:2007/Cor 1:2008
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Technical Corrigendum 1
95.99 ISO/TC 138/SC 2
ISO 4427-1:2019
Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
60.60 ISO/TC 138/SC 2
ISO 4427-2:2007
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes
95.99 ISO/TC 138/SC 2
ISO 4427-2:2007/Amd 1:2014
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes — Amendment 1
95.99 ISO/TC 138/SC 2
ISO 4427-2:2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
60.60 ISO/TC 138/SC 2
ISO 4427-3:2007
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 4427-3:2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
60.60 ISO/TC 138/SC 2
ISO 4427-5:2007
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 4427-5:2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
60.60 ISO/TC 138/SC 2
ISO 4427:1996
Polyethylene (PE) pipes for water supply — Specifications
95.99 ISO/TC 138/SC 2
ISO 4633:1983
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:1996
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:2002
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:2015
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
60.60 ISO/TC 45/SC 4
ISO 6600:1980
Ductile iron pipes — Centrifugal cement mortar lining — Composition controls of freshly applied mortar
95.99 ISO/TC 5/SC 2
ISO 6992:1986
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply — Extractability of cadmium and mercury occurring as impurities
95.99 ISO/TC 138/SC 5
ISO 7259:1988
Predominantly key-operated cast iron gate valves for underground use
95.99 ISO/TC 153
ISO 7858-1:1985
Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 1: Specifications
95.99 ISO/TC 30
ISO 7858-1:1998
Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 1: Specifications
95.99 ISO/TC 30/SC 7
ISO 7858-2:1987
Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 2: Installation requirements
95.99 ISO/TC 30
ISO 7858-2:2000
Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 2: Installation requirements
95.99 ISO/TC 30/SC 7
ISO 7858-3:1992
Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 3: Test methods
95.99 ISO/TC 30/SC 7
ISO 8795:1990
Plastics pipes for the transport of water intended for human consumption — Extractability of constituents — Test method
95.99 ISO/TC 138/SC 5
ISO 8795:1998
Plastics piping systems for the conveyance of water intended for human consumption — Migration assessment — Determination of migration values for plastics pipes
95.99 ISO/TC 138/SC 5
ISO 8795:2001
Plastics piping systems for the transport of water intended for human consumption — Migration assessment — Determination of migration values of plastics pipes and fittings and their joints
90.93 ISO/TC 138/SC 5
ISO 9631:1991
Rubber seals — Joint rings for hot water supply pipelines up to 110 degrees C — Specification for the material
95.99 ISO/TC 45/SC 4
ISO 10221:1993
Ductile iron pipelines — Rubber sealing rings for pipelines carrying potable water
95.99 ISO/TC 5/SC 2
ISO 10385-1:2000
Measurement of water flow in closed conduits — Meters for hot water — Part 1: Specifications
95.99 ISO/TC 30/SC 7
ISO 10508:1995
Thermoplastics pipes and fittings for hot and cold water systems
95.99 ISO/TC 138/SC 2
ISO 10508:2006
Plastics piping systems for hot and cold water installations — Guidance for classification and design
90.93 ISO/TC 138/SC 2
ISO 10508:2006/Amd 1:2018
Plastics piping systems for hot and cold water installations — Guidance for classification and design — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 10639:2004
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
95.99 ISO/TC 138/SC 6
ISO 10639:2004/Amd 1:2011
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1
95.99 ISO/TC 138/SC 6
ISO 10639:2017
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
60.60 ISO/TC 138/SC 6
ISO 11177:2016
Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
95.99 ISO/TC 107
ISO 11177:2019
Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
60.60 ISO/TC 107
ISO 13056:2011
Plastics piping systems — Pressure systems for hot and cold water — Test method for leaktightness under vacuum
90.93 ISO/TC 138/SC 5
ISO 13844:2000
Plastics piping systems — Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes — Test method for leaktightness under negative pressure
95.99 ISO/TC 138/SC 2
ISO 13844:2015
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
60.60 ISO/TC 138/SC 5
ISO 13845:2000
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes — Test method for leaktightness under internal pressure and with angular deflection
95.99 ISO/TC 138/SC 2
ISO 13845:2015
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection
60.60 ISO/TC 138/SC 5
ISO 14236:2000
Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
95.99 ISO/TC 138/SC 2
ISO 15874-1:2003
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
95.99 ISO/TC 138/SC 2
ISO 15874-1:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General — Amendment 1
95.99 ISO/TC 138/SC 2
ISO 15874-1:2013
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
90.93 ISO/TC 138/SC 2
ISO 15874-2:2003
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
95.99 ISO/TC 138/SC 2
ISO 15874-2:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1
95.99 ISO/TC 138/SC 2
ISO 15874-2:2013
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 15874-2:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 15874-3:2003
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15874-3:2013
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 15874-3:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 15874-5:2003
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 15874-5:2013
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO 15874-5:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system — Amendment 1
60.60 ISO/TC 138/SC 2
ISO/TS 15874-7:2003
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 15874-7:2018
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity
60.60 ISO/TC 138/SC 2
ISO 15875-1:2003
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General
90.93 ISO/TC 138/SC 2
ISO 15875-1:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 15875-2:2003
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 15875-2:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 15875-2:2003/CD Amd 2
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 2
30.99 ISO/TC 138/SC 2
ISO 15875-3:2003
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 15875-3:2003/CD Amd 1
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 1
30.99 ISO/TC 138/SC 2
ISO 15875-5:2003
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO 15875-5:2003/CD Amd 1
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Amendment 1
30.99 ISO/TC 138/SC 2
ISO 15875-5:2003/Cor 1:2007
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Technical Corrigendum 1
60.60 ISO/TC 138/SC 2
ISO/TS 15875-7:2003
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 15875-7:2018
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity
60.60 ISO/TC 138/SC 2
ISO 15876-1:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General
95.99 ISO/TC 138/SC 2
ISO 15876-1:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General — Amendment 1
95.99 ISO/TC 138/SC 2
ISO 15876-1:2017
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General
60.60 ISO/TC 138/SC 2
ISO 15876-2:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes
95.99 ISO/TC 138/SC 2
ISO 15876-2:2003/Amd 1:2007
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes — Amendment 1
95.99 ISO/TC 138/SC 2
ISO 15876-2:2017
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes
60.60 ISO/TC 138/SC 2
ISO 15876-3:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15876-3:2017
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings
60.60 ISO/TC 138/SC 2
ISO 15876-5:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 15876-5:2017
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system
60.60 ISO/TC 138/SC 2
ISO/TS 15876-7:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 15876-7:2018
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 7: Guidance for the assessment of conformity
60.60 ISO/TC 138/SC 2
ISO 15877-1:2003
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General
95.99 ISO/TC 138/SC 2
ISO 15877-1:2009
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General
90.93 ISO/TC 138/SC 2
ISO 15877-1:2009/Amd 1:2010
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 15877-2:2003
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes
95.99 ISO/TC 138/SC 2
ISO 15877-2:2009
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 15877-2:2009/Amd 1:2010
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 15877-3:2003
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15877-3:2009
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 15877-3:2009/Amd 1:2010
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 15877-5:2003
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 15877-5:2009
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO 15877-5:2009/Amd 1:2010
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 1
60.60 ISO/TC 138/SC 2
ISO/TS 15877-7:2003
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 15877-7:2009
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 15877-7:2018
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
60.60 ISO/TC 138/SC 2
ISO 16422:2006
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
95.99 ISO/TC 138/SC 2
ISO 16422:2014
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
90.60 ISO/TC 138/SC 2
ISO 16631:2016
Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement
60.60 ISO/TC 5/SC 2
ISO 21003-1:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
90.93 ISO/TC 138/SC 2
ISO 21003-2:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 21003-2:2008/Amd 1:2011
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes — Amendment 1
60.60 ISO/TC 138/SC 2
ISO 21003-3:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 21003-5:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO/TS 21003-7:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 21003-7:2008/Amd 1:2010
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity — Amendment 1
95.99 ISO/TC 138/SC 2
ISO/TS 21003-7:2019
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
60.60 ISO/TC 138/SC 2
ISO 21053:2019
Life cycle analysis and recycling of ductile iron pipes for water applications
60.60 ISO/TC 5/SC 2
ISO 22158:2011
Input/output protocols and electronic interfaces for water meters — Requirements
90.93 ISO/TC 30/SC 7
ISO 22391-1:2007
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General
95.99 ISO/TC 138/SC 2
ISO 22391-1:2009
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General
90.93 ISO/TC 138/SC 2
ISO 22391-2:2007
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
95.99 ISO/TC 138/SC 2
ISO 22391-2:2009
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
90.93 ISO/TC 138/SC 2
ISO 22391-3:2007
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 22391-3:2009
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 22391-5:2007
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 22391-5:2009
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system
90.93 ISO/TC 138/SC 2
ISO/TS 22391-7:2011
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
95.99 ISO/TC 138/SC 2
ISO/TS 22391-7:2018
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
60.60 ISO/TC 138/SC 2
ISO 23711:2003
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
90.93 ISO/TC 45/SC 4
ISO/TS 24520:2017
Service activities relating to drinking water supply systems and wastewater systems — Crisis management — Good practice for technical aspects
60.60 ISO/TC 224
ISO 25780:2011
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques
90.92 ISO/TC 138/SC 6
ISO/TR 27165:2012
Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
90.93 ISO/TC 138/SC 2

No matching records found. Please try changing the filter settings.