Standards catalogue

83.140.50 - Seals

Seals for general use, see 21.140
Seals for general use, see 23.040.80
  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO/R 1398:1970 [Withdrawn]
Withdrawal of ISO/R 1398-1970
95.99 ISO/TC 45/SC 4
ISO 1749:1973 [Withdrawn]
Aircraft -- Elastomeric sealing rings -- Packaging and identification
95.99 ISO/TC 20/SC 10
ISO 3601-1:1978 [Withdrawn]
Fluid systems -- O-rings -- Part 1: Inside diameters, cross-sections, tolerances and size identification code
95.99 ISO/TC 131/SC 7
ISO 3601-1:1988 [Withdrawn]
Fluid systems -- Sealing devices -- O-rings -- Part 1: Inside diameters, cross-sections, tolerances and size identification code
95.99 ISO/TC 131/SC 7
ISO 3601-1:2002 [Withdrawn]
Fluid power systems -- O-rings -- Part 1: Inside diameters, cross-sections, tolerances and size identification code
95.99 ISO/TC 131/SC 7
ISO 3601-1:2008 [Withdrawn]
Fluid power systems -- O-rings -- Part 1: Inside diameters, cross-sections, tolerances and designation codes
95.99 ISO/TC 131/SC 7
95.99 ISO/TC 131/SC 7
95.99 ISO/TC 131/SC 7
ISO 3601-1:2012
Fluid power systems -- O-rings -- Part 1: Inside diameters, cross-sections, tolerances and designation codes
90.93 ISO/TC 131/SC 7
60.60 ISO/TC 131/SC 7
ISO 3601-1:2012/DAmd 1 [Under development]
40.60 ISO/TC 131/SC 7
ISO 3601-2:2008 [Withdrawn]
Fluid power systems -- O-rings -- Part 2: Housing dimensions for general applications
95.99 ISO/TC 131/SC 7
ISO 3601-2:2016
Fluid power systems -- O-rings -- Part 2: Housing dimensions for general applications
60.60 ISO/TC 131/SC 7
ISO 3601-3:1987 [Withdrawn]
Fluid systems -- Sealing devices -- O-rings -- Part 3: Quality acceptance criteria
95.99 ISO/TC 131/SC 7
ISO 3601-3:2005
Fluid power systems -- O-rings -- Part 3: Quality acceptance criteria
90.93 ISO/TC 131/SC 7
60.60 ISO/TC 131/SC 7
ISO 3601-4:2008
Fluid power systems -- O-rings -- Part 4: Anti-extrusion rings (back-up rings)
90.93 ISO/TC 131/SC 7
ISO 3601-5:2002 [Withdrawn]
Fluid power systems -- O-rings -- Part 5: Suitability of elastomeric materials for industrial applications
95.99 ISO/TC 131/SC 7
ISO 3601-5:2015
Fluid power systems -- O-rings -- Part 5: Specification of elastomeric materials for industrial applications
60.60 ISO/TC 131/SC 7
ISO 3934:1978 [Withdrawn]
Rubber building gaskets -- Materials in preformed solid vulcanizates used for sealing glazing and panels -- Specification
95.99 ISO/TC 45/SC 4
ISO 3934:2002
Rubber, vulcanized and thermoplastic -- Preformed gaskets used in buildings -- Classification, specifications and test methods
90.92 ISO/TC 45/SC 4
ISO/WD 3934 [Under development]
Rubber, vulcanized and thermoplastic -- Preformed gaskets used in buildings -- Classification, specifications and test methods
20.99 ISO/TC 45/SC 4
ISO 3939:1977
Fluid power systems and components -- Multiple lip packing sets -- Methods for measuring stack heights
90.93 ISO/TC 131/SC 7
ISO 4633:1983 [Withdrawn]
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:1996 [Withdrawn]
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:2002 [Withdrawn]
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
95.99 ISO/TC 45/SC 4
ISO 4633:2015
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
60.60 ISO/TC 45/SC 4
ISO 4635:1982 [Withdrawn]
Rubber, vulcanized -- Preformed compression seals for use between concrete motorway paving sections -- Specification for material
95.99 ISO/TC 45/SC 4
ISO 4635:2011
Rubber, vulcanized -- Preformed joint seals for use between concrete paving sections of highways -- Specification
90.93 ISO/TC 45/SC 4
ISO 4927:1978 [Withdrawn]
Road vehicles -- Elastomeric boots for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C maximum)
95.99 ISO/TC 22
ISO 4927:2005
Road vehicles -- Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.60 ISO/TC 22/SC 33
ISO 4928:1980 [Withdrawn]
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
95.99 ISO/TC 22
ISO 4928:2006
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.60 ISO/TC 22/SC 33
ISO 4930:1978 [Withdrawn]
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
95.99 ISO/TC 22
ISO 4930:2006
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
90.60 ISO/TC 22/SC 33
ISO 5892:1981 [Withdrawn]
Rubber building gaskets -- Materials for preformed solid vulcanized structural gaskets -- Specification
95.99 ISO/TC 45/SC 4
ISO 5892:2013
Rubber building gaskets -- Materials for preformed solid vulcanized structural gaskets -- Specification
90.93 ISO/TC 45/SC 4
ISO 6117:1980 [Withdrawn]
Road vehicles -- Elastomeric boots for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
95.99 ISO/TC 22
ISO 6117:2005
Road vehicles -- Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
90.60 ISO/TC 22/SC 33
ISO 6118:1980 [Withdrawn]
Road vehicles -- Elastomeric cups and seals for hydraulic brake actuating cylinders using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
95.99 ISO/TC 22
ISO 6118:2006
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
90.60 ISO/TC 22/SC 33
ISO 6119:1980 [Withdrawn]
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
95.99 ISO/TC 22
ISO 6119:2006
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
90.60 ISO/TC 22/SC 33
ISO 6194-1:1982 [Withdrawn]
Rotary shaft lip type seals -- Part 1: Nominal dimensions and tolerances
95.99 ISO/TC 131/SC 7
ISO 6194-1:2007
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 1: Nominal dimensions and tolerances
90.93 ISO/TC 131/SC 7
ISO 6194-2:1991 [Withdrawn]
Rotary shaft lip type seals -- Part 2: Vocabulary
95.99 ISO/TC 131/SC 7
ISO 6194-2:2009
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 2: Vocabulary
90.93 ISO/TC 131/SC 7
ISO 6194-3:1988 [Withdrawn]
Rotary shaft lip type seals -- Part 3: Storage, handling and installation
95.99 ISO/TC 131/SC 7
ISO 6194-3:2009
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 3: Storage, handling and installation
90.93 ISO/TC 131/SC 7
ISO 6194-4:1988 [Withdrawn]
Rotary shaft lip type seals -- Part 4: Performance test procedures
95.99 ISO/TC 131/SC 7
ISO 6194-4:1999 [Withdrawn]
Rotary shaft lip type seals -- Part 4: Performance test procedures
95.99 ISO/TC 131/SC 7
ISO 6194-4:2009
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 4: Performance test procedures
90.93 ISO/TC 131/SC 7
ISO 6194-5:1990 [Withdrawn]
Rotary shaft lip type seals -- Part 5: Identification of visual imperfections
95.99 ISO/TC 131/SC 7
ISO 6194-5:2008
Rotary-shaft lip-type seals incorporating elastomeric sealing elements -- Part 5: Identification of visual imperfections
90.93 ISO/TC 131/SC 7
ISO 6447:1983 [Withdrawn]
Rubber seals -- Joint rings used for gas supply pipes and fittings -- Specification for material
95.99 ISO/TC 45/SC 4
ISO 6448:1985 [Withdrawn]
Rubber seals -- Joint rings used for petroleum product supply pipes and fittings -- Specification for material
95.99 ISO/TC 45/SC 4
ISO 7630:1985
Road vehicles -- Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93 ISO/TC 22/SC 33
ISO 7631:1985
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93 ISO/TC 22/SC 33
ISO 7632:1985
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93 ISO/TC 22/SC 33
ISO 7633:1985
Road vehicles -- Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
90.93 ISO/TC 22/SC 33
ISO 7986:1997
Hydraulic fluid power -- Sealing devices -- Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
90.93 ISO/TC 131/SC 7
ISO 9553:1997
Solar energy -- Methods of testing preformed rubber seals and sealing compounds used in collectors
90.93 ISO/TC 180
ISO 9631:1991 [Withdrawn]
Rubber seals -- Joint rings for hot water supply pipelines up to 110 degrees C -- Specification for the material
95.99 ISO/TC 45/SC 4
ISO 9631:2003 [Withdrawn]
Rubber seals -- Joint rings for pipelines for hot-water supply up to 110 degrees C -- Specification for the material
95.99 ISO/TC 45/SC 4
ISO 9631:2018
Rubber seals -- Joint rings for pipelines for hot-water supply up to 110 °C -- Specification for the material
60.60 ISO/TC 45/SC 4
ISO 10221:1993 [Withdrawn]
Ductile iron pipelines -- Rubber sealing rings for pipelines carrying potable water
95.99 ISO/TC 5/SC 2
ISO 16010:2005
Elastomeric seals -- Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
90.92 ISO/TC 45/SC 4
ISO/DIS 16010 [Under development]
Elastomeric seals -- Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
40.99 ISO/TC 45/SC 4
ISO 16589-1:2001 [Withdrawn]
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 1: Nominal dimensions and tolerances
95.99 ISO/TC 131/SC 7
ISO 16589-1:2011
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 1: Nominal dimensions and tolerances
90.93 ISO/TC 131/SC 7
60.60 ISO/TC 131/SC 7
ISO 16589-2:2001 [Withdrawn]
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 2: Vocabulary
95.99 ISO/TC 131/SC 7
ISO 16589-2:2011
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 2: Vocabulary
90.93 ISO/TC 131/SC 7
ISO 16589-3:2001 [Withdrawn]
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 3: Storage, handling and installation
95.99 ISO/TC 131/SC 7
ISO 16589-3:2011
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 3: Storage, handling and installation
90.93 ISO/TC 131/SC 7
ISO 16589-4:2001 [Withdrawn]
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 4: Performance test procedures
95.99 ISO/TC 131/SC 7
ISO 16589-4:2011
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 4: Performance test procedures
90.93 ISO/TC 131/SC 7
ISO 16589-5:2001 [Withdrawn]
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 5: Identification of visual imperfections
95.99 ISO/TC 131/SC 7
ISO 16589-5:2011
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 5: Identification of visual imperfections
90.93 ISO/TC 131/SC 7
ISO 21049:2004
Pumps -- Shaft sealing systems for centrifugal and rotary pumps
90.60 ISO/TC 115/SC 3
ISO/DIS 21049 [Deleted]
Pumps -- Shaft-sealing systems for centrifugal and rotary pumps
40.98 ISO/TC 115/SC 3
ISO 23711:2003
Elastomeric seals -- Requirements for materials for pipe joint seals used in water and drainage applications -- Thermoplastic elastomers
90.93 ISO/TC 45/SC 4
ISO 27996:2009
Aerospace fluid systems -- Elastomer seals -- Storage and shelf life
90.93 ISO/TC 20/SC 10

No matching records found