Plastics — Determination of water absorption

Plastics — Determination of water absorption

Plastics — Determination of water absorption

Plastics — Determination of temperature of deflection under load — Part 1: General test method

Plastics — Determination of temperature of deflection under load — Part 1: General test method

Plastics — Determination of temperature of deflection under load — Part 1: General test method

Plastics — Determination of temperature of deflection under load — Part 1: General test method

Plastics and ebonite — Determination of temperature of deflection under load

Withdrawal of ISO/R 117-1959

Withdrawal of ISO 118-1976

Plastics — Determination of bulk factor of moulding materials

Withdrawal of ISO/R 173-1961

Plastics — Determination of the effects of liquid chemicals, including water

Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals

Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals

Plastics — Determination of loss of plasticizers — Activated carbon method

Plastics — Determination of loss of plasticizers — Activated carbon method

Plastics — Determination of migration of plasticizers

Plastics — Determination of migration of plasticizers

Plastics — Determination of migration of plasticizers

Plastics — Determination of flexural properties of rigid plastics

Plastics — Determination of flexural properties

Plastics — Determination of flexural properties

Plastics — Determination of flexural properties — Amendment 1: Precision statement

Plastics — Determination of flexural properties

Plastics — Determination of flexural properties — Amendment 1

Plastics — Determination of flexural properties

Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test

Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test — Amendment 1

Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test

Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test

Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Amendment 1: Precision data

Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Technical Corrigendum 1

Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test

Plastics — Determination of Charpy impact strength of rigid materials

Plastics — Determination of Charpy impact strength

Plastics — Determination of Charpy impact strength — Technical Corrigendum 1

Plastics — Determination of Izod impact strength of rigid materials

Plastics — Determination of Izod impact strength

Plastics — Determination of Izod impact strength — Technical Corrigendum 1

Plastics — Determination of Izod impact strength

Plastics — Determination of Izod impact strength — Amendment 1

Plastics — Determination of Izod impact strength — Amendment 2: Precision data

Plastics — Determination of Izod impact strength

Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod

Plastics — Qualitative evaluation of the bleeding of colorants

Plastics — List of equivalent terms

Plastics — List of equivalent terms — Addendum 1

Plastics — List of equivalent terms — Addendum 2

Plastics — List of equivalent terms — Addendum 4

Plastics — List of equivalent terms — Addendum 5

Plastics — Standard atmospheres for conditioning and testing

Plastics — Standard atmospheres for conditioning and testing

Plastics — Standard atmospheres for conditioning and testing — Technical Corrigendum 1

Plastics — Standard atmospheres for conditioning and testing

Plastics — Standard atmospheres for conditioning and testing

Withdrawal of ISO/R 292-1967

Plastics — Determination of stiffness in torsion of flexible materials — Part 1: General method

Plastics — Determination of stiffness in torsion as a function of temperature

Withdrawal of ISO/R 462-1965

Plastics — Vocabulary

Plastics — Vocabulary — Addendum 1

Plastics — Vocabulary — Addendum 2

Plastics — Vocabulary — Addendum 3

Plastics — Vocabulary

Plastics — Vocabulary — Amendment 1: Terms relating to individual macromolecules, their assemblies, dilute polymer solutions and crystalline polymers

Plastics — Vocabulary — Amendment 3: General terms and terms relating to degradable plastics

Plastics — Vocabulary — Amendment 4: Basic terms in polymer science

Plastics — Vocabulary — Amendment 5: Terms relating to carbon fibre

Plastics — Vocabulary

Plastics — Vocabulary

Plastics — Vocabulary — Amendment 1: Additional items

Plastics — Determination of the refractive index of transparent plastics

Plastics — Determination of refractive index

Plastics — Determination of refractive index

Plastics — Determination of tensile properties — Part 1: General principles

Plastics — Determination of tensile properties — Part 1: General principles — Amendment 1: Details of extensometer

Plastics — Determination of tensile properties — Part 1: General principles — Technical Corrigendum 1

Plastics — Determination of tensile properties — Part 1: General principles

Plastics — Determination of tensile properties — Part 1: General principles

Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics

Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics — Technical Corrigendum 1

Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics

Plastics — Determination of tensile properties

Plastics — Testing with the torsion pendulum

Withdrawal of ISO/R 600-1967

Plastics — Determination of compressive properties

Plastics — Determination of compressive properties

Plastics — Determination of compressive properties

Plastics — Determination of behaviour under the action of fungi and bacteria — Evaluation by visual examination or measurement of change in mass or physical properties

Plastics — Evaluation of the action of microorganisms

Plastics — Evaluation of the action of microorganisms

Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)

Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)

Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)

Withdrawal of ISO/R 869-1968

Withdrawal of ISO/R 870-1968

Plastics — Determination of temperature of evolution of flammable gases (decomposition temperature) from a small sample of pulverized material

Plastics — Determination of ignition temperature using a hot-air furnace

Plastics — Determination of ignition temperature using a hot-air furnace

Plastics — Determination of ignition temperature using a hot-air furnace

Plastics — Methods of exposure to solar radiation — Part 1: General guidance

Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass

Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation

Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation

Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors

Withdrawal of ISO/R 878-1968

Withdrawal of ISO/R 879-1968

Plastics — Determination of creep behaviour — Part 1: Tensile creep

Plastics — Determination of creep behaviour — Part 1: Tensile creep

Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1

Plastics — Determination of creep behaviour — Part 1: Tensile creep

Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading

Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading

Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1

Withdrawal of ISO/R 922-1969

Plastics — Determination of the brittleness temperature by impact

Plastics — Determination of the brittleness temperature by impact

Plastics — Symbols — Part 1: Basic polymers and their special characteristics

Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics

Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics

Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics

Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics — Amendment 1: New symbol ST for syndiotactic

Plastics — Symbols — Part 2: Fillers and reinforcing materials

Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials

Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials

Plastics — Symbols and abbreviated terms — Part 3: Plasticizers

Plastics — Symbols and abbreviated terms — Part 3: Plasticizers

Plastics — Symbols and abbreviated terms — Part 4: Flame retardants

Plastics — Symbols and abbreviated terms — Part 4: Flame retardants — Amendment 1: Code numbers

Plastics — Symbols and abbreviated terms — Part 4: Flame retardants

Plastics — Symbols

Plastics — Determination of the melt flow rate of thermoplastics

Plastics — Determination of behaviour in a ventilated tubular oven

Plastics — Aqueous dispersions of polymers and copolymers — Freeze-thaw cycle stability test

Plastics/rubber — Polymer dispersions and synthetic rubber latices — Freeze-thaw cycle stability test

Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method

Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method

Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method

Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method

Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method

Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method

Plastics — Methods for determining the density and relative density of non-cellular plastics

Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics

Withdrawal of ISO/R 1195-1970

Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame

Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source

Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution

Plastics — Determination of flammability and burning rate of plastics in the form of film

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension

Plastics — Aqueous dispersions of polymers and copolymers — Determination of residue at 105 degrees C

Plastics — Polymer dispersions — Determination of non-volatile matter (residue) at specified temperatures

Withdrawal of ISO/R 1627-1970

Guidelines for the standardization of methods for the determination of viscosity number and limiting viscosity number of polymers in dilute solution — Part 1: General conditions

Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles

Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles

Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles — Amendment 1

Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles

Plastics — Directives for the standardization of methods for the determination of the dilute solution viscosity of polymers

Plastics — Liquid resins — Determination of density by the pyknometer method

Plastics — Liquid resins — Determination of density by the pyknometer method

Plastics — Determination of hardness — Part 1: Ball indentation method

Plastics — Determination of hardness — Part 1: Ball indentation method

Plastics — Determination of hardness — Part 1: Ball indentation method

Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness

Plastics — Determination of hardness — Part 2: Rockwell hardness

Plastics and ebonite — Determination of hardness by the ball indentation method

Plastics — Polymer dispersions — Determination of white point temperature and minimum film-forming temperature

Resins in the liquid state or as emulsions or dispersions — Determination of Brookfield RV viscosity

Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity by the Brookfield Test method

Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity using a single cylinder type rotational viscometer method

Plastics — Determination of time-temperature limits after exposure to prolonged action of heat

Plastics — Determination of time-temperature limits after prolonged exposure to heat

Plastics — Preparation of test specimens by machining

Plastics — Preparation of test specimens by machining — Technical Corrigendum 1

Plastics — Preparation of test specimens by machining

Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method

Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers

Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods

Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods — Technical Corrigendum 1

Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods

Plastics — Preparation and use of multipurpose test specimens

Plastics — Multipurpose test specimens

Plastics — Multipurpose test specimens

Plastics — Multipurpose test specimens

Rheology — Part 1: Vocabulary and symbols for rotational and oscillatory rheometry

Rheology — Part 2: General principles of rotational and oscillatory rheometry

Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate

Paints, varnishes and plastics — Determination of non-volatile-matter content

Paints, varnishes and plastics — Determination of non-volatile-matter content

Paints, varnishes and plastics — Determination of non-volatile-matter content

Plastics — Determination of ash — Part 1: General methods

Plastics — Determination of ash — Part 1: General methods

Plastics — Determination of ash — Part 1: General methods

Plastics — Determination of ash — Part 1: General methods

Withdrawal of ISO 3451-1976

Withdrawal of ISR/TR 3717-1975

Withdrawal of ISO/TR 3718-1975

Plastics — Measurement of resistivity of conductive plastics

Plastics — Measurement of resistivity of conductive plastics

Plastics — Determination of modulus of elasticity by alternating flexure

Plastics — Polymer dispersions — Determination of sieve residue (gross particle and coagulum content)

Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light

Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources

Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources

Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources

Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance

Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test — Amendment 1

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 4: High gas velocity test

Plastics — Determination of flammability by oxygen index

Plastics — Determination of resistance to environmental stress cracking (ESC) — Bent strip method

Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method

Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method

Plastics — Methods of exposure to natural weathering

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Chemically Induced UPE (ultra-weak photon emission) — Measurement as an analysis method of degradation of polymeric material

Measurement method of anti-biofilm activity on non-porous surfaces

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc sources

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1: Classification of daylight filters

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps — Technical Corrigendum 1

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

Plastics — Determination of specific aerobic biodegradation rate of solid plastic materials and Disappearance Time (DT50) under mesophilic laboratory test conditions

Plastics — Smoke generation — Part 1: Guidance on optical-density testing

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test — Technical Corrigendum 1

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method

Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Plastics — Determination of environmental stress cracking (ESC) — Constant tensile stress method

Plastics — Determination of environmental stress cracking (ESC) — Constant-tensile-stress method

Plastics — Determination of matter extractable by organic solvents (conventional methods)

Plastics — Determination of matter extractable by organic solvents (conventional methods)

Plastics — Determination of matter extractable by organic solvents (conventional methods)

Plastics — Friction and wear by sliding — Identification of test parameters

Plastics — Friction and wear by sliding — Identification of test parameters

Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 1: Falling dart method

Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing

Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 2: Instrumented puncture test

Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing

Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing

Plastics — Determination of dynamic mechanical properties — Part 1: General principles

Plastics — Determination of dynamic mechanical properties — Part 1: General principles — Technical Corrigendum 1

Plastics — Determination of dynamic mechanical properties — Part 1: General principles

Plastics — Determination of dynamic mechanical properties — Part 1: General principles

Plastics — Determination of dynamic mechanical properties — Part 1: General principles

Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method

Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method — Technical Corrigendum 1

Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method

Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method

Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method

Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method — Technical Corrigendum 1

Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method

Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method — Amendment 1

Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method — Amendment 1

Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method — Amendment 1

Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method

Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method

Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method

Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method — Amendment 1: Precision

Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method

Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature

Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature

Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method

Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method

Plastics — Thermogravimetry of polymers — Temperature scanning method

Plastics — Determination of tensile-impact strength

Plastics — Determination of tensile-impact strength — Technical Corrigendum 1

Plastics — Determination of tensile-impact strength

Plastics — Determination of permanganate absorption number of caprolactam — Spectrometric method

Plastics — Polymer dispersions — Determination of density

Plastics — Determination of resistance to wear by abrasive wheels

Plastics — Determination of resistance to wear by abrasive wheels

Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method

Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method

Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method

Plastics — Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source

Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source — Amendment 1: Specimens

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources — Technical Corrigendum 1

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials

Plastics — Acquisition and presentation of comparable single-point data

Plastics — Determination of the combustibility of specimens using a 125 mm flame source

Plastics — Survey of ignition sources used for national and international fire tests

Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy

Plastics — Guidance for the use of standard fire tests

Plastics — Burning behaviour — Guidance for development and use of fire tests

Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1

Plastics — Guidance for the use of standard fire tests

Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)

Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)

Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles

Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles

Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles

Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature

Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height

Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height

Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization

Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization — Amendment 1

Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization

Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization

Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity

Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity

Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity

Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time

Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time — Amendment 1

Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics

Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics

Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics

Plastics — Differential scanning calorimetry (DSC) — Part 8: Determination of thermal conductivity

Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles

Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles

Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy

Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy

Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy

Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics

Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics

Plastics — Thermogravimetry (TG) of polymers — General principles

Plastics — Thermomechanical analysis (TMA) — Part 1: General principles

Plastics — Thermomechanical analysis (TMA) — Part 1: General principles

Plastics — Thermomechanical analysis (TMA) — Part 1: General principles

Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature

Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature

Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties

Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties

Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers

Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers

Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers

Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers

Plastics — Generic identification and marking of plastic products

Plastics — Generic identification and marking of plastics products

Plastics — Generic identification and marking of plastics products

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: Guidance

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 3: Dynamic decomposition method using a travelling furnace

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods

Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method

Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method

Plastics — Vertical flame spread determination for film and sheet

Plastics — Vertical flame spread determination for film and sheet

Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument

Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument

Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument

Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument

Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach

Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach — Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres

Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 1: Direct liquid injection method

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 1: Direct liquid injection method

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 2: Headspace method

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 2: Headspace method

Plastics — Simple heat release test using a conical radiant heater and a thermopile detector

Plastics — Simple heat release test using a conical radiant heater and a thermopile detector

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production

Plastics — Determination of haze for transparent materials

Plastics — Determination of haze for transparent materials — Technical Corrigendum 1

Plastics — Determination of haze for transparent materials

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer — Technical Corrigendum 1

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide — Technical Corrigendum 1

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production — Technical Corrigendum 1

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method — Technical Corrigendum 1

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test — Technical Corrigendum 1

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test

Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide

Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Amendment 1: Use of activated vermiculite instead of mature compost

Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC

Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC

Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC

Plastics — Guidelines for the recovery and recycling of plastics waste

Plastics — Guidelines for the recovery and recycling of plastics waste

Plastics — Methods for marine exposure

Plastics — Methods for marine exposure

Plastics — Determination of water content

Plastics — Determination of water content

Plastics — Determination of water content

Plastics — Determination of water content

Plastics — Determination of water content

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products

Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach

Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach

Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas

Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas — Technical Corrigendum 1

Plastics — Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions — Method by analysis of released biogas

Plastics — Determination of linear dimensions of test specimens

Plastics — Determination of linear dimensions of test specimens — Technical Corrigendum 1

Plastics — Determination of linear dimensions of test specimens

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles — Technical Corrigendum 1

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles

Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method

Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method

Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method

Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method

Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 5: Method using light-scattering detection

Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method

Plastics — Determination of xylene-soluble matter in polypropylene

Plastics — Determination of xylene-soluble matter in polypropylene

Plastics — Biobased content — Part 1: General principles

Plastics — Biobased content — Part 2: Determination of biobased carbon content

Plastics — Biobased content — Part 2: Determination of biobased carbon content

Plastics — Biobased content — Part 3: Determination of biobased synthetic polymer content

Plastics — Biobased content — Part 4: Determination of biobased mass content

Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content

Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations

Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations

Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test

Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test

Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test

Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test

Specifications for compostable plastics

Specifications for compostable plastics

Plastics — Organic recycling — Specifications for compostable plastics

Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image)

Plastics — Determination of yellowness index and change in yellowness index

Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)

Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)

Plastics — Guide to the acquisition and presentation of design data

Plastics — Environmental aspects — General guidelines for their inclusion in standards

Plastics — Environmental aspects — General guidelines for their inclusion in standards

Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility

Plastics — Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved

Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved

Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved

Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method

Plastics — Standard table for reference global solar spectral irradiance at sea level — Horizontal, relative air mass 1

Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface — Method by measuring the oxygen demand in closed respirometer

Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance

Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions

Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions

Plastics — Determination of scratch properties

Plastics — Instrumented micro-indentation test for hardness measurement

Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide

Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide

Plastics — Abrasion test method for artificial turfs using combined UV exposure and mechanical wear

Plastics — Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS

Plastics — Temperature modulated DSC — Part 1: General principles

Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp

Plastics — Temperature modulated DSC — Part 3: Separation of overlapping thermal transitions

Plastics — Guidance on fire characteristics and fire performance of PVC materials used in building applications

Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test

Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test

Plastics — Determination of abrasive wear by reciprocating linear sliding motion

Plastics — Test specimens

Plastics — Test specimens

Plastics — Determination of the transient extensional viscosity of polymer melts

Plastics — Determination of the transient extensional viscosity of polymer melts

Plastics — Determination of fracture toughness of polyethylene (PE) under plane stress impact conditions

Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens

Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation

Plastics — Test method for exposing polyolefins outdoors combining natural weathering and artificial irradiation

Plastics and ebonite — Verification of Shore durometers

Measurement of antiviral activity on plastics and other non-porous surfaces

Plastics — Environmental aspects — State of knowledge and methodologies

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 1: General guidance

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 2: Constant tensile load method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 3: Bent strip method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 4: Ball or pin impression method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 5: Constant tensile deformation method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 6: Slow strain rate method

Plastics — Measurement of antibacterial activity on plastics surfaces

Measurement of antibacterial activity on plastics and other non-porous surfaces

Plastics — Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions — Test methods and requirements

Plastics — Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment — Method by analysis of evolved carbon dioxide

Plastics — Carbon and environmental footprint of biobased plastics — Part 1: General principles

Plastics — Carbon and environmental footprint of biobased plastics — Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule

Plastics — Carbon and environmental footprint of biobased plastics — Part 3: Process carbon footprint, requirements and guidelines for quantification

Plastics — Carbon and environmental footprint of biobased plastics — Part 4: Environmental (total) footprint (Life Cycle Assessment)

Plastics — Determination of the degree of disintegration of plastic materials in marine habitats under real field conditions

Plastics — Determination of fracture toughness of films and thin sheets: the essential work of fracture

Plastics — Elasticity index — Determination of elastic property of melts

Plastics — Determination of apparent activation energies of property changes in standard weathering test methods

Plastics — Determination of spray water delivery during spray cycles when using a xenon arc weathering test apparatus

Plastics — Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions

Plastics — Recycling and recovery — Necessity of standards

Plastics — Fast differential scanning calorimetry (FSC) — Chip calorimetry

Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 1: Method by analysis of evolved carbon dioxide

Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 2: Method by measuring the oxygen demand in closed respirometer

Principles for the analysis of plastic and microplastic present in the environment

Plastics — Production quality control — Statistical method for using single measurements

Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites

Plastics — Determination of total luminous transmittance and reflectance

Plastics — Determination of J-R curves

Plastics — Determination of mode I plane-strain crack-arrest toughness

Plastics — Artificial weathering including acidic deposition

Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites

Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods

Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods

Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods — Amendment 1

Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods — Amendment 1

Determination of certain substances in electrotechnical products — Part 11: Determination of Tris (2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS)