Shipbuilding details — Marking of rolled, drawn and extruded products in light metals or in light alloys

Wrought aluminium and aluminium alloys — Chemical composition and forms of products — Part 1: Chemical composition

Wrought aluminium and aluminium alloys — Chemical composition and forms of products — Part 2: Forms of products

Aluminium and aluminium alloys — Chemical composition

Composition of wrought products of aluminium and aluminium alloys — Chemical composition (per cent)

Mechanical property limits for rolled products of aluminium and aluminium alloys

Mechanical property limits for extruded products of aluminium and aluminium alloys

Mechanical property limits for extruded products of aluminium and aluminium alloys — Addendum 1

Mechanical property limits for rivet stock of aluminium and aluminium alloys

Mechanical property limits for aluminium alloy forgings

Flattening test on aluminium and aluminium alloy tubes

Simple torsion test for aluminium and aluminium alloy wire

Wrapping test for aluminium and aluminium alloy wire

Wrought aluminium and aluminium alloys — Rolled products — Mechanical properties

Aluminium alloy chill castings — Reference test bar

Aluminium alloy sand castings — Reference test bar

Extruded solid profiles in aluminium-zinc- magnesium alloy Al Zn4,5 Mg1 (7020) — Chemical composition and mechanical properties

Cast aluminium alloys — Chemical composition of cast aluminium alloys and mechanical properties of sand cast aluminium alloys

Aluminium and aluminium alloys — Castings — Chemical composition and mechanical properties

Aluminium and aluminium alloys — Castings — Chemical composition and mechanical properties

Wrought aluminium and aluminium alloy products — General conditions for inspection and delivery

Wrought aluminium and aluminium alloys — Drawn round bars — Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)

Materials and equipment for petroleum and natural gas industries — Aluminium alloy drill pipe for oil or natural gas wells

Plain bearings — Aluminium alloy for solid bearings

Plain bearings — Aluminium alloys for solid bearings

Plain bearings — Aluminium alloys for solid bearings

Wrought aluminium and aluminium alloy sheets, strips and plates — Part 1: Technical conditions for inspection and delivery

Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery

Wrought aluminium and aluminium alloy sheets, strips and plates — Part 2: Mechanical properties

Wrought aluminium and aluminium alloy sheets, strips and plates — Part 2: Mechanical properties

Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties

Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties

Wrought aluminium and aluminium alloy sheets, strips and plates — Part 3: Strips — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions

Wrought aluminium and aluminium alloy sheets, strips and plates — Part 4: Sheets and plates — Tolerances on form and dimensions

Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition

Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery

Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 2: Mechanical properties

Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 2: Mechanical properties

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties

Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on dimensions and form

Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 4: Extruded profiles — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 5: Extruded round, square and hexagonal bars — Tolerances on form and dimensions

Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 5: Extruded round, square and hexagonal bars — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition

Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 1: Technical conditions for inspection and delivery

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery

Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 2: Mechanical properties

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars and tubes and wires — Part 2: Mechanical properties

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3: Drawn round bars and wires — Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)

Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 4: Drawn rectangular bars — Tolerances on form and dimensions

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 4: Drawn rectangular bars and wires — Tolerances on form and dimensions

Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 5: Drawn square and hexagonal bars — Tolerances on form and dimensions

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 5: Drawn square and hexagonal bars and wires — Tolerances on form and dimensions

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6: Drawn round tubes — Tolerances on form and dimensions

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars and tubes and wires — Part 2: Mechanical properties

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3: Drawn round bars and wires — Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 4: Drawn rectangular bars and wires — Tolerances on form and dimensions

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 5: Drawn square and hexagonal bars and wires — Tolerances on form and dimensions

Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6: Drawn round tubes — Tolerances on form and dimensions

Wrought aluminium and aluminium alloy cold-drawn wire — Part 1: Technical conditions for inspection and delivery

Aluminium and aluminium alloys — Foil and thin strip — Dimensional tolerances

Aluminium and aluminium alloys — Foil and thin strip — Dimensional tolerances

Wrought aluminium and aluminium alloys — Extruded round bars — Tolerances on shape and dimensions

Wrought aluminium and aluminium alloys — Drawn round bars — Tolerances on shape and dimensions (All minus tolerances on diameter)

Aluminium alloy castings produced by gravity, sand, or chill casting, or by related processes — General conditions for inspection and delivery

Wrought aluminium and aluminium alloys — Sheet — Tolerances on shape and dimensions

Petroleum and natural gas industries — Aluminium alloy pipe for use as tubing for wells

Petroleum and natural gas industries — Aluminium alloy drill pipe

Petroleum and natural gas industries — Aluminium alloy drill pipe

Petroleum and natural gas industries — Aluminium alloy drill pipe

Petroleum and natural gas industries — Aluminium alloy drill pipe thread connection gauging