Mechanical testing in general, see 19.060
Mechanical testing of welded joints, see 25.160.40
  • Filter:

  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO/R 79:1968
Brinell hardness test for steel
95.99 ISO/TC 164/SC 3
ISO/R 80:1968
Rockwell hardness test (B and C scales) for steel
95.99 ISO/TC 164/SC 3
ISO/R 81:1967
Vickers hardness test for steel (Load 5 to 100 kgf)
95.99 ISO/TC 164/SC 3
ISO 82:1974
Steel — Tensile testing
95.99 ISO/TC 164/SC 1
ISO 83:1976
Steel — Charpy impact test (U-notch)
95.99 ISO/TC 164/SC 4
ISO/R 84:1959
Izod impact test for steel
95.99 ISO/TC 164/SC 4
ISO/R 85:1959
Bend test for steel
95.99 ISO/TC 164/SC 2
ISO 86:1974
Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick
95.99 ISO/TC 164/SC 1
ISO/R 87:1959
Simple bend testing of steel sheet and strip less than 3 mm thick
95.99 ISO/TC 164/SC 2
ISO/R 88:1959
Reverse bend testing of steel sheet and strip less than 3 mm thick
95.99 ISO/TC 164/SC 2
ISO 89:1974
Steel — Tensile testing of wire
95.99 ISO/TC 164/SC 1
ISO 136:1972
Steel — Simple torsion testing of wire
95.99 ISO/TC 164/SC 2
ISO 144:1973
Steel — Reverse bend testing of wire
95.99 ISO/TC 164/SC 2
ISO/R 145:1960
Wrapping test for steel wire
95.99 ISO/TC 164/SC 2
ISO 146-2:1993
Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2
95.99 ISO/TC 164/SC 3
ISO 146:1984
Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100
95.99 ISO/TC 164/SC 3
ISO/R 146:1968
Verification of Vickers hardness testing machines
95.99 ISO/TC 164
ISO/R 147:1960
Load calibration of testing machines for tensile testing of steel
95.99 ISO/TC 164/SC 1
ISO 148-1:2006
Metallic materials — Charpy pendulum impact test — Part 1: Test method
95.99 ISO/TC 164/SC 4
ISO 148-1:2009
Metallic materials — Charpy pendulum impact test — Part 1: Test method
95.99 ISO/TC 164/SC 4
ISO 148-1:2016
Metallic materials — Charpy pendulum impact test — Part 1: Test method
60.60 ISO/TC 164/SC 4
ISO 148-2:1998
Metallic materials — Charpy pendulum impact test — Part 2: Verification of test machines
95.99 ISO/TC 164/SC 4
ISO 148-2:2008
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
95.99 ISO/TC 164/SC 4
ISO 148-2:2016
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
60.60 ISO/TC 164/SC 4
ISO 148-3:1998
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V reference test pieces for verification of test machines
95.99 ISO/TC 164/SC 4
ISO 148-3:2008
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
95.99 ISO/TC 164/SC 4
ISO 148-3:2016
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
60.60 ISO/TC 164/SC 4
ISO 148:1983
Steel — Charpy impact test (V-notch)
95.99 ISO/TC 164/SC 4
ISO/R 149:1960
Modified Erichsen cupping test for steel sheet and strip
95.99 ISO/TC 164/SC 2
ISO 156:1982
Metallic materials — Hardness test — Verification of Brinell hardness testing machines
95.99 ISO/TC 164/SC 3
ISO/R 165:1960
Flanging test on steel tubes
95.99 ISO/TC 164/SC 2
ISO/R 166:1960
Drift expanding test on steel tubes
95.99 ISO/TC 164/SC 2
ISO/R 167:1960
Bend test on steel tubes
95.99 ISO/TC 164/SC 2
ISO/R 184:1961
Brinell hardness test for grey cast iron
95.99 ISO/TC 25
ISO/R 190:1961
Tensile testing of light metals and their alloys
95.99 ISO/TC 164/SC 1
ISO/R 191:1971
Brinell hardness test for light metals and their alloys
95.99 ISO/TC 164/SC 3
ISO/R 192:1971
Wickers hardness test for light metals and their alloys
95.99 ISO/TC 164/SC 3
ISO/R 195:1961
Drift expanding test on copper and copper alloy tubes
95.99 ISO/TC 164/SC 2
ISO/R 202:1961
Flattening test on steel tubes
95.99 ISO/TC 164/SC 2
ISO/R 203:1961
Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)
95.99 ISO/TC 164/SC 1
ISO 204:1997
Metallic materials — Uninterrupted uniaxial creep testing in tension — Method of test
95.99 ISO/TC 164/SC 1
ISO 204:2009
Metallic materials — Uniaxial creep testing in tension — Method of test
95.99 ISO/TC 164/SC 1
ISO 204:2018
Metallic materials — Uniaxial creep testing in tension — Method of test
60.60 ISO/TC 164/SC 1
ISO/R 204:1961
Non-interrupted creep testing of steel at elevated temperatures
95.99 ISO/TC 164/SC 1
ISO/R 205:1961
Determination of proof stress and proving test for steel at elevated temperature
95.99 ISO/TC 17/SC 20
ISO/R 206:1961
Creep stress rupture testing of steel at elevated temperatures
95.99 ISO/TC 164/SC 1
ISO/R 373:1964
General principles for fatigue testing of metals
95.99 ISO/TC 164
ISO/R 374:1964
Ring expanding test on steel tubes
95.99 ISO/TC 164/SC 2
ISO 375:1974
Steel — Tensile testing of tubes
95.99 ISO/TC 164/SC 1
ISO 376:1987
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99 ISO/TC 164/SC 1
ISO 376:1999
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99 ISO/TC 164/SC 1
ISO 376:2004
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99 ISO/TC 164/SC 1
ISO 376:2011
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
90.93 ISO/TC 164/SC 1
ISO/R 376:1964
Calibration of elastic proving devices
95.99 ISO/TC 164/SC 1
ISO 377-1:1989
Selection and preparation of samples and test pieces of wrought steels — Part 1: Samples and test pieces for mechanical test
95.99 ISO/TC 17/SC 20
ISO 377:1985
Wrought steel — Selection and preparation of samples and test pieces
95.99 ISO/TC 17/SC 20
ISO 377:1997
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
95.99 ISO/TC 17/SC 20
ISO 377:1997/Cor 1:1997
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing — Technical Corrigendum 1
95.99 ISO/TC 17/SC 20
ISO 377:2013
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
95.99 ISO/TC 17/SC 20
ISO 377:2017
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
60.60 ISO/TC 17/SC 20
ISO/R 397:1964
Wrapping test for copper and copper alloy wire
95.99 ISO/TC 164/SC 2
ISO/R 398:1964
Bend test for copper and copper alloys
95.99 ISO/TC 164/SC 2
ISO/R 399:1964
Vickers hardness test for copper and copper alloys (Test loads from 2.5 to 50 kgf)
95.99 ISO/TC 164/SC 3
ISO/R 400:1964
Tensile testing of copper and copper alloys
95.99 ISO/TC 164/SC 1
ISO/R 401:1964
Tensile testing of copper and copper alloy tubes of circular section
95.99 ISO/TC 164/SC 1
ISO/R 402:1964
Tensile testing of copper and copper alloy wire
95.99 ISO/TC 164/SC 1
ISO/R 403:1964
Brinell hardness test for copper and copper alloys
95.99 ISO/TC 164/SC 3
ISO 409-1:1982
Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 1: HV 5 to HV 100
95.99 ISO/TC 164/SC 3
ISO 409-2:1983
Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 2: HV 0,2 to less than HV 5
95.99 ISO/TC 164/SC 3
ISO/R 409:1964
Tables of Vickers hardness values (HV) for metallic materials
95.99 ISO/TC 164/SC 3
ISO 410:1982
Metallic materials — Hardness test — Tables of Brinell hardness values for use in tests made on flat surfaces
95.99 ISO/TC 164/SC 3
ISO/R 442:1965
Verification of pendulum impact testing machines for testing steels
95.99 ISO/TC 164/SC 4
ISO 640-2:1993
Metallic materials — Calibration of standardized blocks to be used for Vickers hardness testing machines — Part 2: Less than HV 0,2
95.99 ISO/TC 164/SC 3
ISO 640:1984
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100
95.99 ISO/TC 164/SC 3
ISO/R 640:1967
Calibration of standardized blocks to be used for Vickers hardness testing machines
95.99 ISO/TC 164
ISO 674:1988
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
95.99 ISO/TC 164/SC 3
ISO/R 674:1968
Calibration of standardized blocks to be used for Rockwell B and C scale hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 716:1986
Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
95.99 ISO/TC 164/SC 3
ISO/R 716:1968
Verification of Rockwell B and C scale hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 726:1982
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 783:1989
Metallic materials — Tensile testing at elevated temperature
95.99 ISO/TC 164/SC 1
ISO 783:1999
Metallic materials — Tensile testing at elevated temperature
95.99 ISO/TC 164/SC 1
ISO/R 783:1968
Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
95.99 ISO/TC 164/SC 1
ISO 946:1975
Grey cast iron — Beam unnotched impact test
95.99 ISO/TC 25
ISO/R 952:1969
Tensile testing of light metal and light metal alloy tubes
95.99 ISO/TC 164/SC 1
ISO/R 953:1969
Drift expanding test on light metal and light metal alloy tubes
95.99 ISO/TC 164/SC 2
ISO/R 954:1969
Simple bend test for light metal and light metal alloy sheet and strip of thickness between 0,2 mm (0.008 in) and 7 mm (0.25 in)
95.99 ISO/TC 164/SC 2
ISO/R 955:1969
Flattening test on aluminium and aluminium alloy tubes
95.99 ISO/TC 164/SC 2
ISO/R 956:1969
Tensile test for light metal and light metal alloy wires
95.99 ISO/TC 164/SC 1
ISO/R 957:1969
Simple torsion test for aluminium and aluminium alloy wire
95.99 ISO/TC 164/SC 2
ISO/R 958:1969
Wrapping test for aluminium and aluminium alloy wire
95.99 ISO/TC 164/SC 2
ISO 1024:1989
Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T)
95.99 ISO/TC 164/SC 3
ISO/R 1024:1969
Rockwell superficial hardness test (N and T scales) for steel
95.99 ISO/TC 164/SC 3
ISO 1079:1989
Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
95.99 ISO/TC 164/SC 3
ISO/R 1079:1969
Verification of Rockwell superficial N and T scale hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 1099:1975
Metals — Axial load fatigue testing
95.99 ISO/TC 164
ISO 1099:2006
Metallic materials — Fatigue testing — Axial force-controlled method
95.99 ISO/TC 164
ISO 1099:2017
Metallic materials — Fatigue testing — Axial force-controlled method
60.60 ISO/TC 164/SC 4
ISO 1143:1975
Metals — Rotating bar bending fatigue testing
95.99 ISO/TC 164
ISO 1143:2010
Metallic materials — Rotating bar bending fatigue testing
90.93 ISO/TC 164/SC 4
ISO/CD 1143
Metallic materials — Rotating bar bending fatigue testing
30.99 ISO/TC 164/SC 4/WG 5
ISO/DIS 1143
Metallic materials — Rotating bar bending fatigue testing
40.98 ISO/TC 164/SC 4
ISO 1352:1977
Steel — Torsional stress fatigue testing
95.99 ISO/TC 164
ISO 1352:2011
Metallic materials — Torque-controlled fatigue testing
90.92 ISO/TC 164/SC 4
ISO/CD 1352
Metallic materials — Torque-controlled fatigue testing
30.00 ISO/TC 164/SC 4
ISO/R 1355:1970
Calibration of standardized blocks to be used for Rockwell superficial N and T scale hardness testing machines
95.99 ISO/TC 164/SC 3
ISO/R 1555:1971
Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) — Tensile test
95.99 ISO/TC 164/SC 1
ISO/R 1556:1971
Copper and copper alloy tubes of circular section — Flattening test
95.99 ISO/TC 164/SC 2
ISO/R 2101:1971
Aluminium and aluminium alloys — Shear test for rivet wire and rivets
95.99 ISO/TC 164/SC 2
ISO 2142:1981
Wrought aluminium, magnesium and their alloys — Selection of specimens and test pieces for mechanical testing
95.99 ISO/TC 79/SC 6
ISO 2566-1:1973
Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels
95.99 ISO/TC 17
ISO 2566-1:1984
Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels
90.93 ISO/TC 17/SC 20
ISO 2566-2:1984
Steel — Conversion of elongation values — Part 2: Austenitic steels
90.93 ISO/TC 17/SC 20
ISO 2573:1977
Tensile testing systems — Determination of K-value
95.99 ISO/TC 164/SC 1
ISO 2625:1973
Copper and copper alloys — Reverse bend testing of wire
95.99 ISO/TC 164/SC 2
ISO 2627:1973
Copper and copper alloys — Simple torsion testing of wire
95.99 ISO/TC 164/SC 2
ISO 2712:1973
Copper and copper alloys — Rockwell superficial hardness test (N and T scales)
95.99 ISO/TC 164/SC 3
ISO 2713:1973
Copper and copper alloys — Rockwell hardness test (B, F and G scales)
95.99 ISO/TC 164/SC 3
ISO 2739:1973
Sintered metal bushes — Determination of radial crushing strength
95.99 ISO/TC 119/SC 3
ISO 2739:2006
Sintered metal bushes — Determination of radial crushing strength
95.99 ISO/TC 119/SC 3
ISO 2739:2012
Sintered metal bushings — Determination of radial crushing strength
90.93 ISO/TC 119/SC 3
ISO 2740:1973
Sintered metal materials (excluding hardmetal) — Tensile test pieces
95.99 ISO/TC 119/SC 3
ISO 2740:1986
Sintered metal materials (excluding hardmetal) — Tensile test pieces
95.99 ISO/TC 119/SC 3
ISO 2740:1999
Sintered metal materials, excluding hardmetals — Tensile test pieces
95.99 ISO/TC 119/SC 3
ISO 2740:2007
Sintered metal materials, excluding hardmetals — Tensile test pieces
95.99 ISO/TC 119/SC 3
ISO 2740:2009
Sintered metal materials, excluding hardmetals — Tensile test pieces
90.60 ISO/TC 119/SC 3
ISO 3312:1975
Sintered metal materials and hardmetals — Determination of Young's modulus
95.99 ISO/TC 119
ISO 3312:1987
Sintered metal materials and hardmetals — Determination of Young modulus
90.93 ISO/TC 119/SC 3
ISO 3325:1975
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
95.99 ISO/TC 119/SC 3
ISO 3325:1996
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
90.93 ISO/TC 119/SC 3
ISO 3325:1996/Amd 1:2001
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength — Amendment 1: Precision statement
60.60 ISO/TC 119/SC 3
ISO 3327:1982
Hardmetals — Determination of transverse rupture strength
95.99 ISO/TC 119/SC 4
ISO 3327:2009
Hardmetals — Determination of transverse rupture strength
90.93 ISO/TC 119/SC 4
ISO 3738-1:1982
Hardmetals — Rockwell hardness test (scale A) — Part 1: Test method
90.93 ISO/TC 119/SC 4
ISO 3738-2:1988
Hardmetals — Rockwell hardness test (scale A) — Part 2: Preparation and calibration of standard test blocks
90.93 ISO/TC 119/SC 4
ISO 3738:1976
Hardmetals — Rockwell hardness test (Scale A)
95.99 ISO/TC 119/SC 4
ISO 3785:1976
Steel — Designation of test piece axes
95.99 ISO/TC 164/SC 4
ISO 3785:2006
Metallic materials — Designation of test specimen axes in relation to product texture
90.93 ISO/TC 164/SC 4
ISO 3878:1983
Hardmetals — Vickers hardness test
95.99 ISO/TC 119/SC 4
ISO 3928:1977
Sintered metal materials, excluding hardmetals — Fatigue test pieces
95.99 ISO/TC 119/SC 3
ISO 3928:1999
Sintered metal materials, excluding hardmetals — Fatigue test pieces
95.99 ISO/TC 119/SC 3
ISO 3928:2016
Sintered metal materials, excluding hardmetals — Fatigue test pieces
60.60 ISO/TC 119/SC 3
ISO 3995:1977
Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
95.99 ISO/TC 119
ISO 3995:1985
Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
90.93 ISO/TC 119/SC 2
ISO 4498-1:1978
Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness
95.99 ISO/TC 119/SC 3
ISO 4498-1:1990
Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness
95.99 ISO/TC 119/SC 3
ISO 4498-2:1981
Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
95.99 ISO/TC 119/SC 3
ISO 4498:2005
Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness
95.99 ISO/TC 119/SC 3
ISO 4498:2010
Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness
90.93 ISO/TC 119/SC 3
ISO 4506:1979
Hardmetals — Compression test
95.99 ISO/TC 119/SC 4
ISO 4506:2018
Hardmetals — Compression test
60.60 ISO/TC 119/SC 4
ISO 4507:1978
Sintered ferrous materials, carburized or carbonitrided — Determination and verification of effective case depth by the Vickers microhardness testing method
95.99 ISO/TC 119/SC 3
ISO 4507:2000
Sintered ferrous materials, carburized or carbonitrided — Determination and verification of case-hardening depth by a micro-hardness test
90.93 ISO/TC 119/SC 3
ISO 4545-1:2005
Metallic materials — Knoop hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 4545-1:2017
Metallic materials — Knoop hardness test — Part 1: Test method
60.60 ISO/TC 164/SC 3
ISO 4545-2:2005
Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
ISO 4545-2:2017
Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
60.60 ISO/TC 164/SC 3
ISO 4545-3:2005
Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
ISO 4545-3:2017
Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
60.60 ISO/TC 164/SC 3
ISO 4545-4:2005
Metallic materials — Knoop hardness test — Part 4: Table of hardness values
95.99 ISO/TC 164/SC 3
ISO 4545-4:2017
Metallic materials — Knoop hardness test — Part 4: Table of hardness values
60.60 ISO/TC 164/SC 3
ISO 4545:1993
Metallic materials — Hardness test — Knoop test
95.99 ISO/TC 164/SC 3
ISO 4546:1993
Metallic materials — Hardness test — Verification of Knoop hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 4547:1993
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Knoop hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 4739:1985
Wrought copper and copper alloy products — Selection and preparation of specimens and test pieces for mechanical testing
90.93 ISO/TC 26
ISO 4964:1984
Steel — Hardness conversions
95.99 ISO/TC 17/SC 20
ISO 4965-1:2012
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 1: Testing systems
90.93 ISO/TC 164/SC 4
ISO 4965-2:2012
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic calibration device (DCD) instrumentation
90.93 ISO/TC 164/SC 4
ISO 4965:1979
Axial load fatigue testing machines — Dynamic force calibration — Strain gauge technique
95.99 ISO/TC 164
ISO 5754:1978
Sintered metal materials, excluding hardmetals — Unnotched impact test piece
95.99 ISO/TC 119/SC 3
ISO 5754:2017
Sintered metal materials, excluding hardmetals — Unnotched impact test piece
60.60 ISO/TC 119/SC 3
ISO 6506-1:1999
Metallic materials — Brinell hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 6506-1:2005
Metallic materials — Brinell hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 6506-1:2014
Metallic materials — Brinell hardness test — Part 1: Test method
90.93 ISO/TC 164/SC 3
ISO 6506-2:1999
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
ISO 6506-2:2005
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
ISO 6506-2:2014
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
ISO 6506-2:2017
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
60.60 ISO/TC 164/SC 3
ISO 6506-3:1999
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
ISO 6506-3:2005
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
ISO 6506-3:2014
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
90.93 ISO/TC 164/SC 3
ISO 6506-4:2005
Metallic materials — Brinell hardness test — Part 4: Table of hardness values
95.99 ISO/TC 164/SC 3
ISO 6506-4:2014
Metallic materials — Brinell hardness test — Part 4: Table of hardness values
90.93 ISO/TC 164/SC 3
ISO 6506:1981
Metallic materials — Hardness test — Brinell test
95.99 ISO/TC 164/SC 3
ISO 6507-1:1982
Metallic materials — Hardness test — Vickers test — Part 1: HV 5 to HV 100
95.99 ISO/TC 164/SC 3
ISO 6507-1:1997
Metallic materials — Vickers hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 6507-1:2005
Metallic materials — Vickers hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 6507-1:2018
Metallic materials — Vickers hardness test — Part 1: Test method
60.60 ISO/TC 164/SC 3
ISO 6507-2:1983
Metallic materials — Hardness test — Vickers test — Part 2: HV 0,2 to less than HV 5
95.99 ISO/TC 164/SC 3
ISO 6507-2:1997
Metallic materials — Vickers hardness test — Part 2: Verification of testing machines
95.99 ISO/TC 164/SC 3
ISO 6507-2:2005
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
ISO 6507-2:2018
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
60.60 ISO/TC 164/SC 3
ISO 6507-3:1989
Metallic materials — Hardness test — Vickers test — Part 3: Less than HV 0,2
95.99 ISO/TC 164/SC 3
ISO 6507-3:1997
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
ISO 6507-3:2005
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
ISO 6507-3:2018
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
60.60 ISO/TC 164/SC 3
ISO 6507-4:2005
Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
95.99 ISO/TC 164/SC 3
ISO 6507-4:2018
Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
60.60 ISO/TC 164/SC 3
ISO 6508-1:1999
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-1:2005
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-1:2015
Metallic materials — Rockwell hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 6508-1:2016
Metallic materials — Rockwell hardness test — Part 1: Test method
60.60 ISO/TC 164/SC 3
ISO 6508-2:1999
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-2:2005
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-2:2015
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
60.60 ISO/TC 164/SC 3
ISO 6508-3:1999
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-3:2005
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-3:2015
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
60.60 ISO/TC 164/SC 3
ISO 6508:1986
Metallic materials — Hardness test — Rockwell test (scales A - B - C - D - E - F - G - H - K)
95.99 ISO/TC 164/SC 3
ISO 6892-1:2009
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
95.99 ISO/TC 164/SC 1
ISO 6892-1:2016
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
95.99 ISO/TC 164/SC 1
ISO 6892-1:2019
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
60.60 ISO/TC 164/SC 1
ISO 6892-2:2011
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
95.99 ISO/TC 164/SC 1
ISO 6892-2:2018
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
60.60 ISO/TC 164/SC 1
ISO 6892-3:2015
Metallic materials — Tensile testing — Part 3: Method of test at low temperature
60.60 ISO/TC 164/SC 1
ISO 6892-4:2015
Metallic materials — Tensile testing — Part 4: Method of test in liquid helium
60.60 ISO/TC 164/SC 1
ISO 6892:1984
Metallic materials — Tensile testing
95.99 ISO/TC 164/SC 1
ISO 6892:1998
Metallic materials — Tensile testing at ambient temperature
95.99 ISO/TC 164/SC 1
ISO 7438:1985
Metallic materials — Bend test
95.99 ISO/TC 164/SC 2
ISO 7438:2005
Metallic materials — Bend test
95.99 ISO/TC 164/SC 2
ISO 7438:2016
Metallic materials — Bend test
90.92 ISO/TC 164/SC 2
ISO/DIS 7438
Metallic materials — Bend test
40.60 ISO/TC 164/SC 2
ISO 7500-1:1986
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tensile testing machines
95.99 ISO/TC 164/SC 1
ISO 7500-1:1999
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
95.99 ISO/TC 164/SC 1
ISO 7500-1:2004
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
95.99 ISO/TC 164/SC 1
ISO 7500-1:2004/Cor 1:2008
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system — Technical Corrigendum 1
95.99 ISO/TC 164/SC 1
ISO 7500-1:2015
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
95.99 ISO/TC 164/SC 1
ISO 7500-1:2018
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
60.60 ISO/TC 164/SC 1
ISO 7500-2:1996
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied load
95.99 ISO/TC 164/SC 1
ISO 7500-2:2006
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied force
90.93 ISO/TC 164/SC 1
ISO 7799:1985
Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test
90.93 ISO/TC 164/SC 2
ISO 7800:1984
Metallic materials — Wire — Simple torsion test
95.99 ISO/TC 164/SC 2
ISO 7800:2003
Metallic materials — Wire — Simple torsion test
95.99 ISO/TC 164/SC 2
ISO 7800:2012
Metallic materials — Wire — Simple torsion test
90.93 ISO/TC 164/SC 2
ISO 7801:1984
Metallic materials — Wire — Reverse bend test
90.93 ISO/TC 164/SC 2
ISO 7802:1983
Metallic materials — Wire — Wrapping test
95.99 ISO/TC 164/SC 2
ISO 7802:2013
Metallic materials — Wire — Wrapping test
90.93 ISO/TC 164/SC 2
ISO 8490:1986
Metallic materials — Sheet and strip — Modified Erichsen cupping test
95.99 ISO/TC 164/SC 2
ISO 8491:1986
Metallic materials — Tube (in full section) — Bend test
95.99 ISO/TC 164/SC 2
ISO 8491:1998
Metallic materials — Tube (in full section) — Bend test
90.60 ISO/TC 164/SC 2
ISO 8492:1986
Metallic materials — Tube — Flattening test
95.99 ISO/TC 164/SC 2
ISO 8492:1998
Metallic materials — Tube — Flattening test
95.99 ISO/TC 164/SC 2
ISO 8492:2013
Metallic materials — Tube — Flattening test
90.60 ISO/TC 164/SC 2
ISO 8493:1986
Metallic materials — Tube — Drift-expanding test
95.99 ISO/TC 164/SC 2
ISO 8493:1998
Metallic materials — Tube — Drift-expanding test
90.60 ISO/TC 164/SC 2
ISO 8494:1986
Metallic materials — Tube — Flanging test
95.99 ISO/TC 164/SC 2
ISO 8494:1998
Metallic materials — Tube — Flanging test
95.99 ISO/TC 164/SC 2
ISO 8494:2013
Metallic materials — Tube — Flanging test
90.60 ISO/TC 164/SC 2
ISO 8495:1986
Metallic materials — Tube — Ring-expanding test
95.99 ISO/TC 164/SC 2
ISO 8495:1998
Metallic materials — Tube — Ring-expanding test
95.99 ISO/TC 164/SC 2
ISO 8495:2013
Metallic materials — Tube — Ring-expanding test
90.60 ISO/TC 164/SC 2
ISO 8496:1986
Metallic materials — Tube — Ring tensile test
95.99 ISO/TC 164/SC 2
ISO 8496:1998
Metallic materials — Tube — Ring tensile test
95.99 ISO/TC 164/SC 2
ISO 8496:2013
Metallic materials — Tube — Ring tensile test
90.60 ISO/TC 164/SC 2
ISO 9513:1989
Metallic materials — Verification of extensometers used in uniaxial testing
95.99 ISO/TC 164/SC 1
ISO 9513:1999
Metallic materials — Calibration of extensometers used in uniaxial testing
95.99 ISO/TC 164/SC 1
ISO 9513:1999/Cor 1:2000
Metallic materials — Calibration of extensometers used in uniaxial testing — Technical Corrigendum 1
95.99 ISO/TC 164/SC 1
ISO 9513:2012
Metallic materials — Calibration of extensometer systems used in uniaxial testing
90.93 ISO/TC 164/SC 1
ISO 9513:2012/Cor 1:2013
Metallic materials — Calibration of extensometer systems used in uniaxial testing — Technical Corrigendum 1
60.60 ISO/TC 164/SC 1
ISO 9649:1990
Metallic materials — Wire — Reverse torsion test
95.99 ISO/TC 164/SC 2
ISO 9649:2016
Metallic materials — Wire — Reverse torsion test
60.60 ISO/TC 164/SC 2
ISO/TR 10108:1989
Steel — Conversion of hardness values to tensile strength values
95.99 ISO/TC 17/SC 20
ISO 10113
Metallic materials — Sheet and strip — Determination of plastic strain ratio
60.00 ISO/TC 164/SC 2
ISO 10113:1991
Metallic materials — Sheet and strip — Determination of plastic strain ratio
95.99 ISO/TC 164/SC 2
ISO 10113:2006
Metallic materials — Sheet and strip — Determination of plastic strain ratio
90.92 ISO/TC 164/SC 2
ISO 10250:1994
Metallic materials — Hardness testing — Tables of Knoop hardness values for use in tests made on flat surfaces
95.99 ISO/TC 164/SC 3
ISO 10275:1993
Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent
95.99 ISO/TC 164/SC 2
ISO 10275:2007
Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent
90.93 ISO/TC 164/SC 2
ISO 11531:1994
Metallic materials — Earing test
95.99 ISO/TC 164/SC 2
ISO 11531:2015
Metallic materials — Sheet and strip — Earing test
60.60 ISO/TC 164/SC 2
ISO 12004-1:2008
Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 1: Measurement and application of forming-limit diagrams in the press shop
90.92 ISO/TC 164/SC 2
ISO 12004-2:2008
Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 2: Determination of forming-limit curves in the laboratory
90.92 ISO/TC 164/SC 2
ISO 12004:1997
Metallic materials — Guidelines for the determination of forming-limit diagrams
95.99 ISO/TC 164/SC 2
ISO/DIS 12004-1
Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 1: Measurement and application of forming-limit diagrams in the press shop
40.60 ISO/TC 164/SC 2
ISO/DIS 12004-2
Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 2: Determination of forming-limit curves in the laboratory
40.60 ISO/TC 164/SC 2
ISO/DTR 12105
Metallic materials — Fatigue testing — General principles
30.98 ISO/TC 164/SC 4
ISO 12106:2003
Metallic materials — Fatigue testing — Axial-strain-controlled method
95.99 ISO/TC 164
ISO 12106:2017
Metallic materials — Fatigue testing — Axial-strain-controlled method
60.60 ISO/TC 164/SC 4
ISO 12107:2003
Metallic materials — Fatigue testing — Statistical planning and analysis of data
95.99 ISO/TC 164
ISO 12107:2012
Metallic materials — Fatigue testing — Statistical planning and analysis of data
90.93 ISO/TC 164/SC 4
ISO/DIS 12107
Metallic materials — Fatigue testing — Statistical planning and analysis of data
40.98 ISO/TC 164/SC 4
ISO 12108:2002
Metallic materials — Fatigue testing — Fatigue crack growth method
95.99 ISO/TC 164
ISO 12108:2012
Metallic materials — Fatigue testing — Fatigue crack growth method
95.99 ISO/TC 164/SC 4
ISO 12108:2018
Metallic materials — Fatigue testing — Fatigue crack growth method
60.60 ISO/TC 164/SC 4
ISO 12110-1:2013
Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principles, test method and reporting requirements
90.93 ISO/TC 164/SC 4
ISO 12110-2:2013
Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 2: Cycle counting and related data reduction methods
90.93 ISO/TC 164/SC 4
ISO 12111:2011
Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method
90.93 ISO/TC 164/SC 4
ISO/TR 12112:2018
Metallic materials — Principles and designs for multiaxial fatigue testing
60.60 ISO/TC 164/SC 4
ISO 12135:2002
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
95.99 ISO/TC 164/SC 4
ISO 12135:2002/Cor 1:2008
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness — Technical Corrigendum 1
95.99 ISO/TC 164/SC 4
ISO 12135:2016
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
90.92 ISO/TC 164/SC 4
ISO/DIS 12135
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
40.00 ISO/TC 164/SC 4
ISO/TR 12735-1:1996
Mechanical testing of metals — Symbols used with their definitions — Part 1: Symbols and definitions in published standards
95.99 ISO/TC 164
ISO/TR 12735-2:1996
Mechanical testing of metals — Symbols used with their definitions — Part 2: Recommendations for the development of symbols and definitions
95.99 ISO/TC 164
ISO 12737:1996
Metallic materials — Determination of plane-strain fracture toughness
95.99 ISO/TC 164/SC 4
ISO 12737:2005
Metallic materials — Determination of plane-strain fracture toughness
95.99 ISO/TC 164/SC 4
ISO 12737:2010
Metallic materials — Determination of plane-strain fracture toughness
95.99 ISO/TC 164/SC 4
ISO 13314:2011
Mechanical testing of metals — Ductility testing — Compression test for porous and cellular metals
90.93 ISO/TC 164/SC 2
ISO 14317:2006
Sintered metal materials excluding hardmetals — Determination of compressive yield strength
95.99 ISO/TC 119/SC 3
ISO 14317:2015
Sintered metal materials excluding hardmetals — Determination of compressive yield strength
60.60 ISO/TC 119/SC 3
ISO 14556:2000
Steel — Charpy V-notch pendulum impact test — Instrumented test method
95.99 ISO/TC 164/SC 4
ISO 14556:2000/Amd 1:2006
Steel — Charpy V-notch pendulum impact test — Instrumented test method — Amendment 1: Annex D — Instrumented Charpy V-notch pendulum impact test of sub-size test pieces
95.99 ISO/TC 164/SC 4
ISO 14556:2015
Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
60.60 ISO/TC 164/SC 4
ISO 14577-1:2002
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 14577-1:2015
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
60.60 ISO/TC 164/SC 3
ISO 14577-2:2002
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
ISO 14577-2:2015
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
60.60 ISO/TC 164/SC 3
ISO 14577-3:2002
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
ISO 14577-3:2015
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
60.60 ISO/TC 164/SC 3
ISO 14577-4:2007
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
95.99 ISO/TC 164/SC 3
ISO 14577-4:2016
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
60.60 ISO/TC 164/SC 3
ISO/CD 14577-5
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
30.60 ISO/TC 164/SC 3
ISO/TR 14577:1995
Metallic materials — Hardness test — Universal test
95.99 ISO/TC 164/SC 3
ISO/TR 14936:1998
Metallic materials — Strain analysis report
95.99 ISO/TC 164/SC 2
ISO/DTR 15262
Mechanical tests on metallic materials — Uncertainty in low-cycle fatigue
30.60 ISO/TC 164/SC 4
ISO 15363:2000
Metallic materials — Tube ring hydraulic pressure test
95.99 ISO/TC 164/SC 2
ISO 15363:2017
Metallic materials — Tube ring hydraulic pressure test
60.60 ISO/TC 164/SC 2
ISO 15461:2018
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests
60.60 ISO/TC 17/SC 10
ISO/TR 15461:1997
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests
95.99 ISO/TC 17/SC 10
ISO 15579:2000
Metallic materials — Tensile testing at low temperature
95.99 ISO/TC 164/SC 1
ISO 16630:2009
Metallic materials — Sheet and strip — Hole expanding test
95.99 ISO/TC 164/SC 2
ISO 16630:2017
Metallic materials — Sheet and strip — Hole expanding test
60.60 ISO/TC 164/SC 2
ISO/TS 16630:2003
Metallic materials — Method of hole expanding test
95.99 ISO/TC 164/SC 2
ISO 16808:2014
Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
90.60 ISO/TC 164/SC 2
ISO 16842:2014
Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece
90.20 ISO/TC 164/SC 2
ISO 16859-1:2015
Metallic materials — Leeb hardness test — Part 1: Test method
60.60 ISO/TC 164/SC 3
ISO 16859-2:2015
Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices
60.60 ISO/TC 164/SC 3
ISO 16859-3:2015
Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks
60.60 ISO/TC 164/SC 3
ISO 17340:2014
Metallic materials — Ductility testing — High speed compression test for porous and cellular metals
90.60 ISO/TC 164/SC 2
ISO 18265:2003
Metallic materials — Conversion of hardness values
95.99 ISO/TC 164/SC 3
ISO 18265:2013
Metallic materials — Conversion of hardness values
90.93 ISO/TC 164/SC 3
ISO 18338:2015
Metallic materials — Torsion test at ambient temperature
60.60 ISO/TC 164/SC 2
ISO 19819:2004
Metallic materials — Tensile testing in liquid helium
95.99 ISO/TC 164/SC 1
ISO 20032:2007
Method for evaluation of tensile properties of metallic superplastic materials
95.99 ISO/TC 164/SC 2
ISO 20032:2013
Method for evaluation of tensile properties of metallic superplastic materials
90.93 ISO/TC 164/SC 2
ISO 20064:2019
Metallic materials — Steel — Method of test for the determination of brittle crack arrest toughness, Kca
60.60 ISO/TC 164/SC 4
ISO 20482:2003
Metallic materials — Sheet and strip — Erichsen cupping test
95.99 ISO/TC 164/SC 2
ISO 20482:2013
Metallic materials — Sheet and strip — Erichsen cupping test
90.93 ISO/TC 164/SC 2
ISO/CD 21913
Temperature verification method applied to dynamic fatigue testing
30.98 ISO/TC 164/SC 4
ISO 22394:2010
Hardmetals — Knoop hardness test
95.99 ISO/TC 119/SC 4
ISO/DIS 22407
Metallic materials — Fatigue testing — Axial plane bending method
40.00 ISO/TC 164/SC 4
ISO 22889:2007
Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint
95.99 ISO/TC 164/SC 4
ISO 22889:2013
Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint
90.60 ISO/TC 164/SC 4
ISO/CD 23296
Force-controlled Thermomechanical Fatigue Testing
30.00 ISO/TC 164/SC 4
ISO 23718:2007
Metallic materials — Mechanical testing — Vocabulary
90.92 ISO/TC 164
ISO/DTR 23718
Metallic materials — Mechanical testing — Vocabulary
30.60 ISO/TC 164
ISO 23788:2012
Metallic materials — Verification of the alignment of fatigue testing machines
90.93 ISO/TC 164/SC 4
ISO 24213:2008
Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending
95.99 ISO/TC 164/SC 2
ISO 24213:2017
Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending
60.60 ISO/TC 164/SC 2
ISO/DTR 25679
Mechanical testing of metals — Symbols and definitions in published standards
30.60 ISO/TC 164
ISO/TR 25679:2005
Mechanical testing of metals — Symbols and definitions in published standards
90.93 ISO/TC 164
ISO 26203-1:2010
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
95.99 ISO/TC 164/SC 1
ISO 26203-1:2018
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
60.60 ISO/TC 164/SC 1
ISO 26203-2:2011
Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems
90.93 ISO/TC 164/SC 1
ISO 26843:2015
Metallic materials — Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
60.60 ISO/TC 164/SC 4
ISO 27306:2009
Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
95.99 ISO/TC 164/SC 4
ISO 27306:2016
Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
60.60 ISO/TC 164/SC 4
ISO 28079:2009
Hardmetals — Palmqvist toughness test
90.93 ISO/TC 119/SC 4
ISO 28080:2011
Hardmetals — Abrasion tests for hardmetals
90.92 ISO/TC 119/SC 4
ISO/DIS 28080
Hardmetals — Abrasion tests for hardmetals
40.00 ISO/TC 119/SC 4
ISO/TR 29381:2008
Metallic materials — Measurement of mechanical properties by an instrumented indentation test — Indentation tensile properties
90.93 ISO/TC 164/SC 3

No matching records found. Please try changing the filter settings.