• Filter:

  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 468:1982
Surface roughness — Parameters, their values and general rules for specifying requirements
95.99 ISO/TC 213
ISO 1302:1978
Technical drawings — Method of indicating surface texture on drawings
95.99 ISO/TC 10
ISO 1302:1992
Technical drawings — Method of indicating surface texture
95.99 ISO/TC 10/SC 6
ISO 1302:2002
Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation
90.92 ISO/TC 213
ISO 4287-1:1984
Surface roughness — Terminology — Part 1: Surface and its parameters
95.99 ISO/TC 213
ISO 4287-2:1984
Surface roughness — Terminology — Part 2: Measurement of surface roughness parameters
95.99 ISO/TC 213
ISO 4287:1997
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
90.92 ISO/TC 213
ISO 4287:1997/Amd 1:2009
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Amendment 1: Peak count number
60.60 ISO/TC 213
ISO 4287:1997/Cor 1:1998
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Technical Corrigendum 1
60.60 ISO/TC 213
ISO 4287:1997/Cor 2:2005
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Technical Corrigendum 2
60.60 ISO/TC 213
ISO 4288:1985
Rules and procedures for the measurement of surface roughness using stylus instruments
95.99 ISO/TC 213
ISO 4288:1996
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture
90.93 ISO/TC 213
ISO 4288:1996/Cor 1:1998
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture — Technical Corrigendum 1
60.60 ISO/TC 213
ISO 4291:1985
Methods for the assessement of departure from roundness — Measurement of variations in radius
90.93 ISO/TC 213
ISO 4292:1985
Methods for the assessment of departure from roundness — Measurement by two- and three-point methods
95.99 ISO/TC 213
ISO 6318:1985
Measurement of roundness — Terms, definitions and parameters of roundness
95.99 ISO/TC 213
ISO 8785:1998
Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters
90.20 ISO/TC 213
ISO 11562:1996
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological characteristics of phase correct filters
95.99 ISO/TC 213
ISO 11562:1996/Cor 1:1998
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological characteristics of phase correct filters — Technical Corrigendum 1
95.99 ISO/TC 213
ISO 12085:1996
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Motif parameters
90.92 ISO/TC 213
ISO 12085:1996/Cor 1:1998
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Motif parameters — Technical Corrigendum 1
60.60 ISO/TC 213
ISO 12180-1:2011
Geometrical product specifications (GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form
90.93 ISO/TC 213
ISO 12180-2:2011
Geometrical product specifications (GPS) — Cylindricity — Part 2: Specification operators
90.93 ISO/TC 213
ISO/TS 12180-1:2003
Geometrical Product Specifications (GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form
95.99 ISO/TC 213
ISO/TS 12180-2:2003
Geometrical Product Specifications (GPS) — Cylindricity — Part 2: Specification operators
95.99 ISO/TC 213
ISO/TS 12180-2:2003/Cor 1:2010
Geometrical Product Specifications (GPS) — Cylindricity — Part 2: Specification operators — Technical Corrigendum 1
95.99 ISO/TC 213
ISO 12181-1:2011
Geometrical product specifications (GPS) — Roundness — Part 1: Vocabulary and parameters of roundness
90.93 ISO/TC 213
ISO 12181-2:2011
Geometrical product specifications (GPS) — Roundness — Part 2: Specification operators
90.93 ISO/TC 213
ISO/TS 12181-1:2003
Geometrical Product Specifications (GPS) — Roundness — Part 1: Vocabulary and parameters of roundness
95.99 ISO/TC 213
ISO/TS 12181-2:2003
Geometrical Product Specifications (GPS) — Roundness — Part 2: Specification operators
95.99 ISO/TC 213
ISO/TS 12181-2:2003/Cor 1:2010
Geometrical Product Specifications (GPS) — Roundness — Part 2: Specification operators — Technical Corrigendum 1
95.99 ISO/TC 213
ISO 12780-1:2011
Geometrical product specifications (GPS) — Straightness — Part 1: Vocabulary and parameters of straightness
90.93 ISO/TC 213
ISO 12780-2:2011
Geometrical product specifications (GPS) — Straightness — Part 2: Specification operators
90.93 ISO/TC 213
ISO 12781-1:2011
Geometrical product specifications (GPS) — Flatness — Part 1: Vocabulary and parameters of flatness
90.93 ISO/TC 213
ISO 12781-2:2011
Geometrical product specifications (GPS) — Flatness — Part 2: Specification operators
90.93 ISO/TC 213
ISO 13565-1:1996
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 1: Filtering and general measurement conditions
90.93 ISO/TC 213
ISO 13565-1:1996/Cor 1:1998
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 1: Filtering and general measurement conditions — Technical Corrigendum 1
60.60 ISO/TC 213
ISO 13565-2:1996
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve
90.92 ISO/TC 213
ISO 13565-2:1996/Cor 1:1998
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve — Technical Corrigendum 1
60.60 ISO/TC 213
ISO 13565-3:1998
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 3: Height characterization using the material probability curve
90.92 ISO/TC 213
ISO 16610-1:2015
Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts
60.60 ISO/TC 213
ISO 16610-20:2015
Geometrical product specifications (GPS) — Filtration — Part 20: Linear profile filters: Basic concepts
60.60 ISO/TC 213
ISO 16610-21:2011
Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters
90.93 ISO/TC 213
ISO 16610-22:2015
Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters
60.60 ISO/TC 213
ISO 16610-28:2016
Geometrical product specifications (GPS) — Filtration — Part 28: Profile filters: End effects
60.60 ISO/TC 213
ISO 16610-29:2015
Geometrical product specifications (GPS) — Filtration — Part 29: Linear profile filters: Spline wavelets
90.92 ISO/TC 213
ISO 16610-30:2015
Geometrical product specifications (GPS) — Filtration — Part 30: Robust profile filters: Basic concepts
60.60 ISO/TC 213
ISO 16610-31:2016
Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters
60.60 ISO/TC 213
ISO 16610-40:2015
Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts
60.60 ISO/TC 213
ISO 16610-41:2015
Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters
60.60 ISO/TC 213
ISO 16610-49:2015
Geometrical product specifications (GPS) — Filtration — Part 49: Morphological profile filters: Scale space techniques
60.60 ISO/TC 213
ISO 16610-60:2015
Geometrical product specification (GPS) — Filtration — Part 60: Linear areal filters — Basic concepts
60.60 ISO/TC 213
ISO 16610-61:2015
Geometrical product specification (GPS) — Filtration — Part 61: Linear areal filters — Gaussian filters
90.93 ISO/TC 213
ISO 16610-61:2015/FDAmd 1
Geometrical product specification (GPS) — Filtration — Part 61: Linear areal filters — Gaussian filters — Amendment 1
50.20 ISO/TC 213
ISO 16610-71:2014
Geometrical product specifications (GPS) — Filtration — Part 71: Robust areal filters: Gaussian regression filters
90.93 ISO/TC 213
ISO 16610-85:2013
Geometrical product specifications (GPS) — Filtration — Part 85: Morphological areal filters: Segmentation
90.93 ISO/TC 213
ISO/DIS 16610-29
Geometrical product specifications (GPS) — Filtration — Part 29: Linear profile filters: wavelets
40.99 ISO/TC 213
ISO/TS 16610-1:2006
Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts
95.99 ISO/TC 213
ISO/TS 16610-20:2006
Geometrical product specifications (GPS) — Filtration — Part 20: Linear profile filters: Basic concepts
95.99 ISO/TC 213
ISO/TS 16610-22:2006
Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters
95.99 ISO/TC 213
ISO/TS 16610-28:2010
Geometrical product specifications (GPS) — Filtration — Part 28: Profile filters: End effects
95.99 ISO/TC 213
ISO/TS 16610-29:2006
Geometrical product specifications (GPS) — Filtration — Part 29: Linear profile filters: Spline wavelets
95.99 ISO/TC 213
ISO/TS 16610-30:2009
Geometrical product specifications (GPS) — Filtration — Part 30: Robust profile filters: Basic concepts
95.99 ISO/TC 213
ISO/TS 16610-31:2010
Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters
95.99 ISO/TC 213
ISO/TS 16610-32:2009
Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters
90.93 ISO/TC 213
ISO/TS 16610-40:2006
Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts
95.99 ISO/TC 213
ISO/TS 16610-41:2006
Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters
95.99 ISO/TC 213
ISO/TS 16610-49:2006
Geometrical product specifications (GPS) — Filtration — Part 49: Morphological profile filters: Scale space techniques
95.99 ISO/TC 213
ISO 25178-1:2016
Geometrical product specifications (GPS) — Surface texture: Areal — Part 1: Indication of surface texture
60.60 ISO/TC 213
ISO 25178-2:2012
Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
90.92 ISO/TC 213
ISO 25178-3:2012
Geometrical product specifications (GPS) — Surface texture: Areal — Part 3: Specification operators
90.93 ISO/TC 213
ISO 25178-600:2019
Geometrical product specifications (GPS) — Surface texture: Areal — Part 600: Metrological characteristics for areal topography measuring methods
60.60 ISO/TC 213
ISO 25178-601:2010
Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments
90.93 ISO/TC 213
ISO 25178-602:2010
Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
90.93 ISO/TC 213
ISO 25178-603:2013
Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
90.93 ISO/TC 213
ISO 25178-604:2013
Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
90.93 ISO/TC 213
ISO 25178-605:2014
Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
90.93 ISO/TC 213
ISO 25178-606:2015
Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments
90.92 ISO/TC 213
ISO 25178-607:2019
Geometrical product specifications (GPS) — Surface texture: Areal — Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments
60.60 ISO/TC 213
ISO 25178-6:2010
Geometrical product specifications (GPS) — Surface texture: Areal — Part 6: Classification of methods for measuring surface texture
90.93 ISO/TC 213
ISO 25178-701:2010
Geometrical product specifications (GPS) — Surface texture: Areal — Part 701: Calibration and measurement standards for contact (stylus) instruments
90.93 ISO/TC 213
ISO 25178-70:2014
Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures
90.93 ISO/TC 213
ISO 25178-71:2012
Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards
95.99 ISO/TC 213
ISO 25178-71:2017
Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards
60.60 ISO/TC 213
ISO 25178-72:2017
Geometrical product specifications (GPS) — Surface texture: Areal — Part 72: XML file format x3p
60.60 ISO/TC 213
ISO 25178-72:2017/DAmd 1
Geometrical product specifications (GPS) — Surface texture: Areal — Part 72: XML file format x3p — Amendment 1
40.99 ISO/TC 213
ISO/CD 25178-72
Geometrical product specifications (GPS) — Surface texture: Areal — Part 72: XML file format x3p
30.98 ISO/TC 213
ISO/DIS 25178-2
Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
40.00 ISO/TC 213

No matching records found. Please try changing the filter settings.