ISO 15590-4:2019
2019-09
Prévisualiser cette norme sur notre Plateforme de consultation en ligne (OBP)
ISO 15590-4:2019
Résumé
This document specifies the technical delivery conditions for bends made by the cold bending process for bend with radii 5xOD or higher for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623.
This document also specifies the requirements for the manufacture of two product specification levels (PSLs) of cold bends corresponding to product specification levels given for pipe in ISO 3183. This document is applicable to cold bends made from seamless and welded pipe of unalloyed or low-alloy steels.
NOTE 1 These are typically C-Mn steels or low-alloy steels that are appropriate for the corresponding level and grade of line pipe in accordance with ISO 3183.
This document is not applicable to the selection of the cold bend product specification level. It is the responsibility of the purchaser to specify the PSL, based upon the intended use and design requirements.
NOTE 2 See also ISO 3183:2012, Introduction.
This document is not applicable to field cold bends and pipeline bends made by other manufacturing processes.
Informations générales
-
État actuel: PubliéeDate de publication: 2019-09Stade: Norme internationale à réviser [90.92]
-
Edition: 1
-
Comité technique :ISO/TC 67/SC 2ICS :75.200
- RSS mises à jour
Prochaine édition en cours d'élaboration
ISO/DIS 15590-4
ISO/DIS 15590-4
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone — Coudes d'usine, raccords et brides pour systèmes de transport par conduites
Partie 4: Coudes usinés à froid
ISO/DIS 15590-4
Cycle de vie
-
Actuellement
PubliéeISO 15590-4:2019
Les normes ISO sont réexaminées tous les cinq ans
Stade: 90.92 (Sera révisée) -
Sera remplacée par
ProjetISO/DIS 15590-4