Cette norme a été révisée par ISO 6194-1:2007
Résumé
This part lays down the nominal dimensions relating to seals suitable for shafts from 6 to 400 mm diameter and accompanying housings from 16 to 440 mm. Seals of this type are not normally suitable for high pressure. Includes dimensional limits for the shafts and housings to assure interchangeability of seals from different manufacturers. The six basic types of seals are described and shown in figure 1. The annex includes a recommended form for reaching agreement between purchaser and manufacturer.
Informations générales
-
État actuel : AnnuléeDate de publication : 1982-10
-
Edition : 1Nombre de pages : 7
-
- ICS :
-
Filtres, dispositifs d'étanchéité et contamination des fluides
-
Joints d'étanchéité
Cycle de vie
Les normes ISO sont réexaminées tous les cinq ans
Révision / Rectificatifs techniques
-
Actuellement annulée
ISO 6194-1:1982 -
Révisée par
ISO 6194-1:2007
Vous avez une question?
Consulter notre FAQ
Horaires d’ouverture:
De lundi à vendredi - 09:00-12:00, 14:00-17:00 (UTC+1)
Suivez l'actualité de l'ISO
Inscrivez-vous à notre Newsletter (en anglais) pour suivre nos actualités, points de vue et informations sur nos produits.