• Filter:

  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 737:1975
Coniferous sawn timber — Sizes — Methods of measurement
90.93 ISO/TC 218
ISO 738:1981
Coniferous sawn timber — Sizes — Permissible deviations and shrinkage
95.99 ISO/TC 218
ISO 738:2015
Coniferous sawn timber — Sizes — Permissible deviations and shrinkage
60.60 ISO/TC 218
ISO 1029:1974
Coniferous sawn timber — Defects — Classification
90.93 ISO/TC 218
ISO 1030:1975
Coniferous sawn timber — Defects — Measurement
90.92 ISO/TC 218
ISO 1031:1974
Coniferous sawn timber — Defects — Terms and definitions
90.93 ISO/TC 218
ISO 1032:1974
Coniferous sawn timber — Sizes — Terms and definitions
90.92 ISO/TC 218
ISO 2299:1973
Sawn timber of broadleaved species — Defects — Classification
90.93 ISO/TC 218
ISO 2300:1973
Sawn timber of broadleaved species — Defects — Terms and definitions
90.60 ISO/TC 218
ISO 2301:1973
Sawn timber of broadleaved species — Defects — Measurement
90.93 ISO/TC 218
ISO 3129:1975
Wood — Sampling methods and general requirements for physical and mechanical tests
95.99 ISO/TC 218
ISO 3129:2012
Wood — Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens
95.99 ISO/TC 218
ISO 3129:2019
Wood — Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens
60.60 ISO/TC 218
ISO 3130:1975
Wood — Determination of moisture content for physical and mechanical tests
95.99 ISO/TC 218
ISO 3131:1975
Wood — Determination of density for physical and mechanical tests
95.99 ISO/TC 218
ISO 3132:1975
Wood — Testing in compression perpendicular to grain
90.92 ISO/TC 218
ISO 3133:1975
Wood — Determination of ultimate strength in static bending
95.99 ISO/TC 218
ISO 3179:1974
Coniferous sawn timber — Nominal dimensions
95.99 ISO/TC 218
ISO 3345:1975
Wood — Determination of ultimate tensile stress parallel to grain
95.99 ISO/TC 218
ISO 3346:1975
Wood — Determination of ultimate tensile stress perpendicular to grain
95.99 ISO/TC 218
ISO 3347:1976
Wood — Determination of ultimate shearing stress parallel to grain
90.60 ISO/TC 218
ISO 3348:1975
Wood — Determination of impact bending strength
95.99 ISO/TC 218
ISO 3349:1975
Wood — Determination of modulus of elasticity in static bending
95.99 ISO/TC 218
ISO 3350:1975
Wood — Determination of static hardness
95.99 ISO/TC 218
ISO 3351:1975
Wood — Determination of resistance to impact indentation
95.99 ISO/TC 218
ISO 3787:1976
Wood — Test methods — Determination of ultimate stress in compression parallel to grain
95.99 ISO/TC 218
ISO 4469:1981
Wood — Determination of radial and tangential shrinkage
95.99 ISO/TC 218
ISO 4470:1981
Sawn timber — Determination of the average moisture content of a lot
90.93 ISO/TC 218
ISO 4471:1982
Wood — Sampling sample trees and logs for determination of physical and mechanical properties of wood in homogeneous stands
90.20 ISO/TC 218
ISO 4472:1983
Coniferous and broadleaved sawn timber — Transportation packages
90.93 ISO/TC 218
ISO 4473:1988
Coniferous and broadleaved tree sawlogs — Visible defects — Classification
95.99 ISO/TC 218
ISO 4474:1989
Coniferous and broadleaved tree sawlogs — Visible defects — Terms and definitions
95.99 ISO/TC 218
ISO 4475:1989
Coniferous and broadleaved tree sawlogs — Visible defects — Measurement
90.93 ISO/TC 218
ISO 4476:1983
Coniferous and broadleaved sawlogs — Sizes — Vocabulary
95.99 ISO/TC 218
ISO 4480:1983
Coniferous sawlogs — Measurement of sizes and determination of volume
95.99 ISO/TC 218
ISO 4858:1982
Wood — Determination of volumetric shrinkage
95.99 ISO/TC 218
ISO 4859:1982
Wood — Determination of radial and tangential swelling
95.99 ISO/TC 218
ISO 4860:1982
Wood — Determination of volumetric swelling
95.99 ISO/TC 218
ISO 8903:1994
Broadleaved sawn timber — Nominal sizes
95.99 ISO/TC 218
ISO 8903:2016
Broadleaved sawn timber — Nominal sizes
60.60 ISO/TC 218
ISO 8904:1990
Broadleaved sawn timber — Sizes — Methods of measurement
90.93 ISO/TC 218
ISO 8905:1988
Sawn timber — Test methods — Determination of ultimate strength in shearing parallel to grain
90.93 ISO/TC 218
ISO 8906:1988
Sawn timber — Test methods — Determination of resistance to local transverse compression
90.93 ISO/TC 218
ISO 9086-1:1987
Wood — Methods of physical and mechanical testing — Vocabulary — Part 1: General concepts and macrostructure
90.60 ISO/TC 218
ISO 9709:2005
Structural timber — Visual strength grading — Basic principles
95.99 ISO/TC 165
ISO 9709:2018
Structural timber — Visual strength grading — Basic principles
60.60 ISO/TC 165
ISO 13059:2011
Round timber — Requirements for the measurement of dimensions and methods for the determination of volume
90.93 ISO/TC 218
ISO 13061-10:2017
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 10: Determination of impact bending strength
60.60 ISO/TC 218
ISO 13061-11:2017
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 11: Determination of resistance to impact indentation
60.60 ISO/TC 218
ISO 13061-12:2017
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 12: Determination of static hardness
60.60 ISO/TC 218
ISO 13061-13:2016
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage
60.60 ISO/TC 218
ISO 13061-14:2016
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 14: Determination of volumetric shrinkage
60.60 ISO/TC 218
ISO 13061-15:2017
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 15: Determination of radial and tangential swelling
60.60 ISO/TC 218
ISO 13061-16:2017
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 16: Determination of volumetric swelling
60.60 ISO/TC 218
ISO 13061-17:2017
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 17: Determination of ultimate stress in compression parallel to grain
60.60 ISO/TC 218
ISO 13061-1:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests
90.20 ISO/TC 218
ISO 13061-1:2014/Amd 1:2017
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests — Amendment 1
60.60 ISO/TC 218
ISO 13061-2:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests
90.20 ISO/TC 218
ISO 13061-2:2014/Amd 1:2017
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests — Amendment 1
60.60 ISO/TC 218
ISO 13061-3:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 3: Determination of ultimate strength in static bending
90.20 ISO/TC 218
ISO 13061-3:2014/Amd 1:2017
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 3: Determination of ultimate strength in static bending — Amendment 1
60.60 ISO/TC 218
ISO 13061-4:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 4: Determination of modulus of elasticity in static bending
90.20 ISO/TC 218
ISO 13061-4:2014/Amd 1:2017
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 4: Determination of modulus of elasticity in static bending — Amendment 1
60.60 ISO/TC 218
ISO 13061-5
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 5: Determination of strength in compression perpendicular to grain
60.00 ISO/TC 218
ISO 13061-6:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 6: Determination of ultimate tensile stress parallel to grain
90.20 ISO/TC 218
ISO 13061-6:2014/DAmd 1
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 6: Determination of ultimate tensile stress parallel to grain — Amendment 1
40.98 ISO/TC 218
ISO 13061-7:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 7: Determination of ultimate tensile stress perpendicular to grain
90.20 ISO/TC 218
ISO 13061-7:2014/DAmd 1
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 7: Determination of ultimate tensile stress perpendicular to grain — Amendment 1
40.98 ISO/TC 218
ISO 13912:2005
Structural timber — Machine strength grading — Basic principles
95.99 ISO/TC 165
ISO 13912:2017
Structural timber — Machine strength grading — Basic principles
60.60 ISO/TC 165
ISO 16415:2012
Non-structural timber grading requirements
90.60 ISO/TC 218
ISO/DIS 17300-1.2
Wood residue and post-consumer wood — Classification — Part 1: Vocabulary
40.60 ISO/TC 218
ISO 17959:2014
General requirements for solid wood flooring
90.20 ISO/TC 218
ISO 19474:2018
Round timber — Visual characteristics — Methods of determination
60.60 ISO/TC 218
ISO/DIS 21625
Terminology of bamboo and bamboo products
40.60 ISO/TC 296
ISO 21887:2007
Durability of wood and wood-based products — Use classes
90.93 ISO/TC 165
ISO 22157-1:2004
Bamboo — Determination of physical and mechanical properties — Part 1: Requirements
95.99 ISO/TC 165
ISO 22157:2019
Bamboo structures — Determination of physical and mechanical properties of bamboo culms — Test methods
60.60 ISO/TC 165
ISO/TR 22157-2:2004
Bamboo — Determination of physical and mechanical properties — Part 2: Laboratory manual
95.99 ISO/TC 165
ISO/CD 23066
Terminology of Rattan Materials and Products
30.99 ISO/TC 296
ISO 24294:2013
Timber — Round and sawn timber — Vocabulary
90.92 ISO/TC 218
ISO/CD 24294
Timber — Round and sawn timber — Vocabulary
30.60 ISO/TC 218

No matching records found. Please try changing the filter settings.