Standards catalogue

23.040.45 - Plastics fittings

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 264:1976 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure -- Laying lengths -- Metric series
95.99 ISO/TC 138/SC 2
ISO 264:1976/Add 1:1982 [Withdrawn]
Diameters 200 mm and 225 mm
95.99 ISO/TC 138/SC 2
ISO 265-1:1988
Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
90.93 ISO/TC 138/SC 1
ISO/R 330:1963 [Withdrawn]
Withdrawal of ISO/R 330-1963
95.99 ISO/TC 138
ISO 580:1973 [Withdrawn]
Moulded fittings in unplasticized polyvinyl chloride (PVC) for use under pressure -- Oven test
95.99 ISO/TC 138
ISO 580:1990 [Withdrawn]
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings -- Oven test -- Test method and basic specifications
95.99 ISO/TC 138/SC 5
ISO 580:2005
Plastics piping and ducting systems -- Injection-moulded thermoplastics fittings -- Methods for visually assessing the effects of heating
90.93 ISO/TC 138/SC 5
ISO 727:1979 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure -- Dimensions of sockets -- Metric series
95.99 ISO/TC 138
ISO 727:1985 [Withdrawn]
Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Dimensions of sockets -- Metric series
95.99 ISO/TC 138/SC 2
ISO 727-1:2002
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 1: Metric series
90.93 ISO/TC 138/SC 2
ISO 727-2:2002 [Withdrawn]
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 2: Inch-based series
95.99 ISO/TC 138/SC 2
ISO 727-2:2005
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 2: Inch-based series
90.20 ISO/TC 138/SC 2
ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method
90.93 ISO/TC 138/SC 5
ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces
90.20 ISO/TC 138/SC 5
ISO 1167-3:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components
90.93 ISO/TC 138/SC 5
ISO 1167-4:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies
90.93 ISO/TC 138/SC 5
ISO 1452-1:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General
90.20 ISO/TC 138/SC 2
ISO 1452-2:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes
90.20 ISO/TC 138/SC 2
ISO 1452-3:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings
90.20 ISO/TC 138/SC 2
ISO 1452-4:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves
90.20 ISO/TC 138/SC 2
ISO 1452-5:2009
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system
90.20 ISO/TC 138/SC 2
ISO 2035:1974 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure -- Pressure-resistance test
95.99 ISO/TC 138/SC 5
ISO 2043:1974 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure -- Oven test
95.99 ISO/TC 138
ISO 2044:1974 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe -- Hydraulic internal pressure test
95.99 ISO/TC 138/SC 5
ISO 2045:1973 [Withdrawn]
Single sockets for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement
95.99 ISO/TC 138
ISO 2045:1988 [Withdrawn]
Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement
95.99 ISO/TC 138/SC 2
ISO 2048:1973 [Withdrawn]
Double socket fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement
95.99 ISO/TC 138
ISO 2048:1990 [Withdrawn]
Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement
95.99 ISO/TC 138/SC 2
ISO 2507:1982 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Vicat softening temperature -- Test method and specification
95.99 ISO/TC 138/SC 5
ISO 2507-1:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method
90.93 ISO/TC 138/SC 5
ISO 2507-2:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
90.93 ISO/TC 138/SC 5
ISO 2507-3:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
90.93 ISO/TC 138/SC 5
ISO 3477:1981 [Withdrawn]
Polypropylene (PP) pipes and fittings -- Density -- Determination and specification
95.99 ISO/TC 138/SC 5
ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density
90.93 ISO/TC 138/SC 5
ISO 3603:1977
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Pressure test for leakproofness
90.93 ISO/TC 138/SC 2
ISO 3604:1976 [Withdrawn]
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Pressure test for leakproofness under conditions of external hydraulic pressure
95.99 ISO/TC 138/SC 2
ISO 4056:1978 [Withdrawn]
Polyethylene (PE) pipes and fittings -- Designation of polyethylene, based on nominal density and melt flow index
95.99 ISO/TC 138
ISO 4132:1979
Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure -- Laying lengths and size of threads -- Metric series
90.93 ISO/TC 138/SC 2
ISO 4422-1:1996 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 1: General
95.99 ISO/TC 138/SC 2
ISO 4422-2:1996 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 2: Pipes (with or without integral sockets)
95.99 ISO/TC 138/SC 2
ISO 4422-3:1996 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 3: Fittings and joints
95.99 ISO/TC 138/SC 2
ISO 4422-4:1997 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 4: Valves and ancillary equipment
95.99 ISO/TC 138/SC 2
ISO 4422-5:1997 [Withdrawn]
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 2
ISO 4427-1 [Under development]
Plastics piping systems for water supply, and for drainage and sewerage under pressure -- Polyethylene (PE) -- Part 1: General
60.00 ISO/TC 138/SC 2
ISO 4427-1:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General
90.92 ISO/TC 138/SC 2
ISO 4427-1:2007/Amd 1:2015
Melt mass-flow rate (MFR) for PE 80 and PE 100
60.60 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 4427-3 [Under development]
Plastics piping systems for water supply, and for drainage and sewerage under pressure -- Polyethylene (PE) -- Part 3: Fittings
60.00 ISO/TC 138/SC 2
ISO 4427-3:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings
90.92 ISO/TC 138/SC 2
ISO 4427-5 [Under development]
Plastics piping systems for water supply, and for drainage and sewerage under pressure -- Polyethylene (PE) -- Part 5: Fitness for purpose of the system
60.00 ISO/TC 138/SC 2
ISO 4427-5:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system
90.92 ISO/TC 138/SC 2
ISO 4434:1977 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure -- Laying length and size of threads -- Metric series
95.99 ISO/TC 138/SC 2
ISO 4439:1979
Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density
90.93 ISO/TC 138/SC 5
ISO 4440:1980 [Withdrawn]
Polyethylene (PE) pipes and fittings -- Determination of melt flow rate
95.99 ISO/TC 138
ISO 4440-1:1994 [Withdrawn]
Thermoplastics pipes and fittings -- Determination of melt mass-flow rate -- Part 1: Test method
95.99 ISO/TC 138/SC 5
ISO 4440-2:1994 [Withdrawn]
Thermoplastics pipes and fittings -- Determination of melt mass-flow rate -- Part 2: Test conditions
95.99 ISO/TC 138/SC 5
ISO 4451:1980 [Withdrawn]
Polyethylene (PE) pipes and fittings -- Determination of reference density of uncoloured and black polyethylenes
95.99 ISO/TC 138/SC 5
ISO/TR 6285:1980 [Withdrawn]
Pipes and fittings of acrylonitrile/butadiene/ styrene terpolymer (ABS) -- Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO 6455:1983 [Withdrawn]
Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure -- Dimensions of laying lengths -- Metric series
95.99 ISO/TC 138/SC 2
ISO 7245:1984
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials
90.93 ISO/TC 138/SC 5
ISO 7246:1984
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials
90.93 ISO/TC 138/SC 5
ISO 7279:1984 [Withdrawn]
Polypropylene (PP) fittings for pipes under pressure -- Sockets for fusion using heated tools -- Metric series -- Dimensions of sockets
95.99 ISO/TC 138/SC 2
ISO 7370:1983 [Withdrawn]
Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings -- Nominal diameters, specified diameters and standard lengths
95.99 ISO/TC 138/SC 6
ISO 7432:2002 [Withdrawn]
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
95.99 ISO/TC 138/SC 6
ISO 7432:2018
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
90.92 ISO/TC 138/SC 6
ISO/NP 7432 [Under development]
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
10.99 ISO/TC 138/SC 6
ISO/TR 7471:1981 [Withdrawn]
Polypropylene (PP) pipes and fittings -- Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO/TR 7472:1981 [Withdrawn]
Low density polyethylene pipes and fittings -- Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO/TR 7473:1981 [Withdrawn]
Unplasticized polyvinyl chloride pipes and fittings -- Chemical resistance with respect to fluids
95.99 ISO/TC 138
ISO/TR 7474:1981 [Withdrawn]
High density polyethylene pipes and fittings -- Chemical resistance with respect to fluids to be conveyed
95.99 ISO/TC 138
ISO 7510:1997 [Withdrawn]
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method
95.99 ISO/TC 138/SC 6
ISO 7510:2017
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents
60.60 ISO/TC 138/SC 6
ISO 7511:1999
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure
90.93 ISO/TC 138/SC 6
ISO 7686:1992 [Withdrawn]
Plastics pipes and fittings -- Opacity -- Test method
95.99 ISO/TC 138/SC 5
ISO 7686:2005
Plastics pipes and fittings -- Determination of opacity
90.93 ISO/TC 138/SC 5
ISO 8283-1:1991
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
90.93 ISO/TC 138/SC 1
ISO 8283-2:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 2: Polyethylene (PE)
90.20 ISO/TC 138/SC 1
ISO 8283-3:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 3: Polypropylene (PP)
90.20 ISO/TC 138/SC 1
ISO 8283-4:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS)
90.60 ISO/TC 138/SC 1
ISO 8361-1:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method
90.93 ISO/TC 138/SC 5
ISO 8361-2:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
90.93 ISO/TC 138/SC 5
ISO 8361-3:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
90.93 ISO/TC 138/SC 5
ISO 8483 [Under development]
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints
60.00 ISO/TC 138/SC 6
ISO 8483:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints
90.92 ISO/TC 138/SC 6
60.60 ISO/TC 138/SC 6
ISO 8533 [Under development]
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped joints
60.00 ISO/TC 138/SC 6
ISO 8533:2003
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of cemented or wrapped joints
90.92 ISO/TC 138/SC 6
60.60 ISO/TC 138/SC 6
ISO 8772:1991 [Withdrawn]
High-density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems -- Specifications
95.99 ISO/TC 138/SC 1
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE)
90.93 ISO/TC 138/SC 1
ISO 8773:1991 [Withdrawn]
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems -- Specifications
95.99 ISO/TC 138/SC 1
ISO 8773:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP)
90.93 ISO/TC 138/SC 1
ISO 9623:1997
PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure -- Design lengths and size of threads -- Metric series
90.93 ISO/TC 138/SC 2
ISO 9625:1993 [Withdrawn]
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
95.99 ISO/TC 138/SC 2
ISO 9853:1991
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test
90.93 ISO/TC 138/SC 5
ISO 10147:1994 [Withdrawn]
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content
95.99 ISO/TC 138/SC 5
ISO 10147:2004 [Withdrawn]
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content
95.99 ISO/TC 138/SC 5
95.99 ISO/TC 138/SC 5
ISO 10147:2011
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content
90.93 ISO/TC 138/SC 5
ISO/TR 10358:1993
Plastics pipes and fittings -- Combined chemical-resistance classification table
90.92 ISO/TC 138/SC 3
ISO 10508:1995 [Withdrawn]
Thermoplastics pipes and fittings for hot and cold water systems
95.99 ISO/TC 138/SC 2
ISO 10508:2006
Plastics piping systems for hot and cold water installations -- Guidance for classification and design
90.20 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 10928:1997 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use
95.99 ISO/TC 138/SC 6
ISO 10928:2009 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use
95.99 ISO/TC 138/SC 6
95.99 ISO/TC 138/SC 6
ISO 10928:2016
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use
60.60 ISO/TC 138/SC 6
ISO 10931-3:1996 [Withdrawn]
Plastics piping systems for industrial applications -- Poly(vinylidene fluoride) (PVDF) -- Part 3: Fittings
95.99 ISO/TC 138/SC 3
ISO 10952:1999 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack from the inside of a section in a deflected condition
95.99 ISO/TC 138/SC 6
ISO 10952:2008 [Withdrawn]
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition
95.99 ISO/TC 138/SC 6
ISO 10952:2014
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition
90.60 ISO/TC 138/SC 6
ISO 11296-1:2009 [Withdrawn]
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11296-3:2009 [Withdrawn]
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
95.99 ISO/TC 138/SC 8
ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO 11296-4:2009 [Withdrawn]
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-place pipes
95.99 ISO/TC 138/SC 8
ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-place pipes
60.60 ISO/TC 138/SC 8
ISO 11296-7:2011 [Withdrawn]
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes
95.99 ISO/TC 138/SC 8
ISO 11296-7:2019
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes
60.60 ISO/TC 138/SC 8
ISO 11297-1:2013 [Withdrawn]
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11297-3:2013 [Withdrawn]
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 4: Lining with cured-in-place pipes
60.60 ISO/TC 138/SC 8
ISO 11298-1:2010 [Withdrawn]
Plastics piping systems for renovation of underground water supply networks -- Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks -- Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks -- Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11298-3:2010 [Withdrawn]
Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO/DIS 11298-4 [Under development]
Plastics piping systems for renovation of underground water supply networks -- Part 4: Lining with cured-in-place pipes
40.20 ISO/TC 138/SC 8
ISO 11299-1:2011 [Withdrawn]
Plastics piping systems for renovation of underground gas supply networks -- Part 1: General
95.99 ISO/TC 138/SC 8
ISO 11299-1:2018
Plastics piping systems for renovation of underground gas supply networks -- Part 1: General
60.60 ISO/TC 138/SC 8
ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks -- Part 2: Lining with continuous pipes
60.60 ISO/TC 138/SC 8
ISO 11299-3:2011 [Withdrawn]
Plastics piping systems for renovation of underground gas supply networks -- Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
ISO 11299-3:2018
Plastics piping systems for renovation of underground gas supply networks -- Part 3: Lining with close-fit pipes
60.60 ISO/TC 138/SC 8
ISO 11420:1996 [Withdrawn]
Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds
95.99 ISO/TC 138/SC 5
ISO/TR 11647:1996 [Withdrawn]
Fusion compatibility of polyethylene (PE) pipes and fittings
95.99 ISO/TC 138/SC 5
ISO 12092:2000 [Withdrawn]
Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure -- Resistance to internal pressure -- Test method
95.99 ISO/TC 138/SC 5
ISO 12162:1995 [Withdrawn]
Thermoplastics materials for pipes and fittings for pressure applications -- Classification and designation -- Overall service (design) coefficient
95.99 ISO/TC 138/SC 5
ISO 12162:2009
Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient
90.93 ISO/TC 138/SC 5
ISO 12176-1:1998 [Withdrawn]
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
ISO 12176-1:2006 [Withdrawn]
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
ISO 12176-1:2012 [Withdrawn]
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
ISO 12176-1:2017
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion
60.60 ISO/TC 138/SC 4
ISO 12176-2:2000 [Withdrawn]
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion
95.99 ISO/TC 138/SC 4
ISO 12176-2:2008
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion
90.93 ISO/TC 138/SC 4
ISO 12176-3:2001 [Withdrawn]
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge
95.99 ISO/TC 138/SC 4
ISO 12176-3:2006 [Withdrawn]
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge
95.99 ISO/TC 138/SC 4
ISO 12176-3:2011
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge
90.93 ISO/TC 138/SC 4
ISO 12176-4:2003
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 4: Traceability coding
90.93 ISO/TC 138/SC 4
ISO/DIS 12176-5 [Under development]
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems
40.60 ISO/TC 138/SC 4
ISO 13260:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading
90.93 ISO/TC 138/SC 1
60.60 ISO/TC 138/SC 1
ISO 13262:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam
90.93 ISO/TC 138/SC 1
ISO 13263:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength
90.93 ISO/TC 138/SC 1
ISO 13264:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings
90.93 ISO/TC 138/SC 1
ISO 13265:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
90.93 ISO/TC 138/SC 1
ISO 13266:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading
90.93 ISO/TC 138/SC 1
ISO 13267:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test methods for buckling resistance
90.93 ISO/TC 138/SC 1
ISO 13268:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness
90.93 ISO/TC 138/SC 1
ISO 13272:2011
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations
90.93 ISO/TC 138/SC 1
ISO 13761:1996 [Withdrawn]
Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
95.99 ISO/TC 138/SC 5
ISO 13761:2017
Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
60.60 ISO/TC 138/SC 5
ISO 13924:2000
Plastics pipes and fittings -- Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
90.93 ISO/TC 138/SC 5
ISO 13949:1997 [Withdrawn]
Method for the assessment of the degree of pigment dispersion in polyolefin pipes, fittings and compounds
95.99 ISO/TC 138/SC 5
ISO 13950:2007
Plastics pipes and fittings -- Automatic recognition systems for electrofusion joints
90.93 ISO/TC 138/SC 4
60.60 ISO/TC 138/SC 4
ISO/TR 13950:1997 [Withdrawn]
Plastics pipes and fittings -- Automatic recognition systems for electrofusion
95.99 ISO/TC 138/SC 4
ISO 13957:1997
Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance
90.93 ISO/TC 138/SC 5
ISO 13966:1998
Thermoplastics pipes and fittings -- Nominal ring stiffnesses
90.93 ISO/TC 138
ISO 13967:1998 [Withdrawn]
Thermoplastics fittings -- Determination of ring stiffness
95.99 ISO/TC 138/SC 5
ISO 13967:2009
Thermoplastics fittings -- Determination of ring stiffness
90.93 ISO/TC 138/SC 5
ISO 14236:2000 [Withdrawn]
Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
95.99 ISO/TC 138/SC 2
ISO 14531-1:2002
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes
90.93 ISO/TC 138/SC 4
ISO 14531-2:2004
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing
90.93 ISO/TC 138/SC 4
ISO 14531-3:2006 [Withdrawn]
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
95.99 ISO/TC 138/SC 4
ISO 14531-3:2010
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
90.93 ISO/TC 138/SC 4
ISO 14531-4:2006
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 4: System design and installation guidelines
90.93 ISO/TC 138/SC 4
ISO 15306:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure
90.93 ISO/TC 138/SC 6
60.60 ISO/TC 138/SC 6
ISO 15439-1:2007 [Withdrawn]
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 1: General
95.99 ISO/TC 138/SC 4
ISO 15439-2:2007 [Withdrawn]
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 2: Pipes
95.99 ISO/TC 138/SC 4
ISO 15439-3:2007 [Withdrawn]
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 3: Fittings
95.99 ISO/TC 138/SC 4
ISO 15874-3:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15874-3:2013
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings
90.93 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 15875-3:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 3: Fittings
90.20 ISO/TC 138/SC 2
ISO 15876-3:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15876-3:2017
Plastics piping systems for hot and cold water installations -- Polybutene (PB) -- Part 3: Fittings
60.60 ISO/TC 138/SC 2
ISO 15877-3:2003 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 15877-3:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 3: Fittings
90.20 ISO/TC 138/SC 2
60.60 ISO/TC 138/SC 2
ISO 16241:2005
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
90.20 ISO/TC 138/SC 5
ISO 16422:2006 [Withdrawn]
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications
95.99 ISO/TC 138/SC 2
ISO 16422:2014
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications
90.20 ISO/TC 138/SC 2
ISO 16611:2017
Plastics piping systems for drainage and sewerage without pressure -- Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) -- Dimensions, requirements and tests
60.60 ISO/TC 138/SC 6
ISO 16871:2003
Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for exposure to direct (natural) weathering
90.93 ISO/TC 138/SC 5
ISO/TR 16913:1999
Plastics pipes and fittings -- Definitions of types of test
90.93 ISO/TC 138/SC 5
ISO 17467-1:2012 [Withdrawn]
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 1: General
95.99 ISO/TC 138/SC 4
ISO 17467-2:2012 [Withdrawn]
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 2: Pipes
95.99 ISO/TC 138/SC 4
ISO 17467-3:2012 [Withdrawn]
Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 3: Fittings
95.99 ISO/TC 138/SC 4
ISO 17484-1:2006 [Withdrawn]
Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems
95.99 ISO/TC 138/SC 4
95.99 ISO/TC 138/SC 4
ISO 17484-1:2014
Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems
90.20 ISO/TC 138/SC 4
ISO 17484-2:2009
Plastics piping systems -- Multilayer pipe systems for indoor gas installations -- Part 2: Code of pratice
90.20 ISO/TC 138/SC 4
ISO 17885:2015
Plastics piping systems -- Mechanical fittings for pressure piping systems -- Specifications
90.92 ISO/TC 138/SC 4
60.60 ISO/TC 138/SC 4
ISO/CD 17885 [Under development]
Plastics piping systems -- Mechanical fittings for pressure piping systems -- Specifications
30.99 ISO/TC 138/SC 4
ISO/TS 17902:2016
Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
60.60 ISO/TC 138/SC 1
ISO 18225:2007 [Withdrawn]
Plastics piping systems -- Multilayer piping systems for outdoor gas installations -- Specifications for systems
95.99 ISO/TC 138/SC 4
ISO 18225:2012
Plastics piping systems -- Multilayer piping systems for outdoor gas installations -- Specifications for systems
90.93 ISO/TC 138/SC 4
ISO/TS 18226:2006
Plastics pipes and fittings -- Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
90.93 ISO/TC 138/SC 4
ISO 18488:2015
Polyethylene (PE) materials for piping systems -- Determination of Strain Hardening Modulus in relation to slow crack growth -- Test method
60.60 ISO/TC 138/SC 5
ISO 18489:2015
Polyethylene (PE) materials for piping systems -- Determination of resistance to slow crack growth under cyclic loading -- Cracked Round Bar test method
60.60 ISO/TC 138/SC 5
ISO 18553:2002
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
90.92 ISO/TC 138/SC 5
60.60 ISO/TC 138/SC 5
ISO 18672-1:2009
Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints
90.93 ISO/TC 138/SC 6
ISO/TR 19480:2005
Polyethylene pipes and fittings for the supply of gaseous fuels or water -- Training and assessment of fusion operators
90.93 ISO/TC 138/SC 4
ISO 19893:2011
Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of mounted assemblies to temperature cycling
90.93 ISO/TC 138/SC 5
ISO/TS 19911:2010
Plastics pipes and fittings -- Format of a technical file for characterizing PE spigot end fittings
90.93 ISO/TC 138/SC 5
ISO 21003-3:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 3: Fittings
90.93 ISO/TC 138/SC 2
ISO 21004:2006
Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply
90.93 ISO/TC 138/SC 2
ISO 21138-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system
90.92 ISO/TC 138/SC 1
ISO/DIS 21138-1 [Under development]
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specification and performance criteria for pipes, fittings and the system
40.60 ISO/TC 138/SC 1
ISO 21138-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A
90.92 ISO/TC 138/SC 1
ISO/DIS 21138-2.2 [Under development]
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A
40.60 ISO/TC 138/SC 1
ISO 21138-3:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B
90.92 ISO/TC 138/SC 1
ISO/DIS 21138-3.2 [Under development]
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B
40.60 ISO/TC 138/SC 1
ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks -- Part 1: Replacement on the line by pipe bursting and pipe extraction
60.60 ISO/TC 138/SC 8
ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks -- Part 2: Replacement off the line by horizontal directional drilling and impact moling
60.60 ISO/TC 138/SC 8
ISO 21307:2009 [Withdrawn]
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
95.99 ISO/TC 138/SC 4
ISO 21307:2011 [Withdrawn]
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
95.99 ISO/TC 138/SC 4
ISO 21307:2017
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) piping systems
60.60 ISO/TC 138/SC 4
ISO 21307:2017/DAmd 1 [Under development]
40.20 ISO/TC 138/SC 4
ISO 21751:2011
Plastics pipes and fittings -- Decohesion test of electrofusion assemblies -- Strip-bend test
90.93 ISO/TC 138/SC 5
ISO 22391-3:2007 [Withdrawn]
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings
95.99 ISO/TC 138/SC 2
ISO 22391-3:2009
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings
90.20 ISO/TC 138/SC 2
ISO/TS 26873:2010
Plastics pipes and fittings -- Definition and construction procedures for reference lines
90.93 ISO/TC 138/SC 5

No matching records found