• Filter:

  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 2/SC 11 Secretariat Stage ICS
ISO 898-1:2009
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
95.99
ISO 898-1:2013
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
90.93
ISO 898-1:2013/Cor 1:2013
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread — Technical Corrigendum 1
60.60
ISO 898-5:1998
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners not under tensile stresses
95.99
ISO 898-5:2012
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
90.93
ISO 898-7:1992
Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
90.93
ISO 1207:1992
Slotted cheese head screws — Product grade A
95.99
ISO 1207:2011
Slotted cheese head screws — Product grade A
90.93
ISO 1580:1994
Slotted pan head screws — Product grade A
95.99
ISO 1580:2011
Slotted pan head screws — Product grade A
90.93
ISO 2009:1994
Slotted countersunk flat head screws (common head style) — Product grade A
95.99
ISO 2009:2011
Slotted countersunk flat head screws — Product grade A
90.93
ISO 2010:1994
Countersunk slotted raised head screws (common head style) — Product grade A
95.99
ISO 2010:2011
Slotted raised countersunk head screws — Product grade A
90.93
ISO 2342:2003
Slotted headless screws with shank
90.93
ISO 3800:1993
Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results
90.93
ISO 4014:1999
Hexagon head bolts — Product grades A and B
95.99
ISO 4014:2011
Hexagon head bolts — Product grades A and B
90.92
ISO/CD 4014
Hexagon head bolts — Product grades A and B
30.99
ISO 4015:1979
Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter)
90.92
ISO/CD 4015
Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter)
30.99
ISO 4016:1999
Hexagon head bolts — Product grade C
95.99
ISO 4016:2011
Hexagon head bolts — Product grade C
90.92
ISO/CD 4016
Hexagon head bolts — Product grade C
30.99
ISO 4017:1999
Hexagon head screws — Product grades A and B
95.99
ISO 4017:2011
Hexagon head screws — Product grades A and B
95.99
ISO 4017:2014
Fasteners — Hexagon head screws — Product grades A and B
90.92
ISO/CD 4017
Fasteners — Hexagon head screws — Product grades A and B
30.99
ISO 4018:1999
Hexagon head screws — Product grade C
95.99
ISO 4018:2011
Hexagon head screws — Product grade C
90.92
ISO/CD 4018
Hexagon head screws — Product grade C
30.99
ISO 4026:2003
Hexagon socket set screws with flat point
90.93
ISO 4027:2003
Hexagon socket set screws with cone point
90.93
ISO 4028:2003
Hexagon socket set screws with dog point
90.93
ISO 4029:2003
Hexagon socket set screws with cup point
90.93
ISO 4162:1990
Hexagon flange bolts — Small series
95.99
ISO 4162:2012
Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B
90.93
ISO 4762:2004
Hexagon socket head cap screws
90.93
ISO 4766:1983
Slotted set screws with flat point
95.99
ISO 4766:2011
Slotted set screws with flat point
90.93
ISO 7045:1994
Pan head screws with type H or type Z cross recess — Product grade A
95.99
ISO 7045:2011
Pan head screws with type H or type Z cross recess — Product grade A
90.93
ISO 7046-1:1994
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel of property class 4.8
95.99
ISO 7046-1:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8
90.93
ISO 7046-2:1990
Cross-recessed countersunk flat head screws (common head style) — Grade A — Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals
95.99
ISO 7046-2:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
90.93
ISO 7047:1994
Countersunk raised head screws (common head style) with type H or type Z cross recess — Product grade A
95.99
ISO 7047:2011
Raised countersunk head screws (common head style) with type H or type Z cross recess — Product grade A
90.93
ISO 7048:1998
Cross recessed cheese head screws
95.99
ISO 7048:2011
Cross-recessed cheese head screws
90.93
ISO 7379:1983
Hexagon socket head shoulder screws
90.93
ISO 7380-1:2011
Button head screws — Part 1: Hexagon socket button head screws
90.92
ISO 7380-2:2011
Button head screws — Part 2: Hexagon socket button head screws with collar
90.92
ISO 7380:2004
Hexagon socket button head screws
95.99
ISO/CD 7380-1
Button head screws — Part 1: Hexagon socket button head screws
30.00
ISO/CD 7380-2
Button head screws — Part 2: Hexagon socket button head screws with collar
30.00
ISO 7415:1984
Plain washers for high-strength structural bolting, hardened and tempered
95.99
ISO 7434:1983
Slotted set screws with cone point
90.93
ISO 7435:1983
Slotted set screws with long dog point
90.93
ISO 7436:1983
Slotted set screws with cup point
90.93
ISO 7721-2:1990
Countersunk flat head screws — Part 2: Penetration depth of cross recesses
90.93
ISO 7721:1983
Countersunk head screws — Head configuration and gauging
90.93
ISO 8676:1999
Hexagon head screws with metric fine pitch thread — Product grades A and B
95.99
ISO 8676:2011
Hexagon head screws with metric fine pitch thread — Product grades A and B
90.92
ISO/CD 8676
Hexagon head screws with metric fine pitch thread — Product grades A and B
30.99
ISO 8678:1988
Cup head square neck bolts with small head and short neck — Product grade B
90.93
ISO 8765:1999
Hexagon head bolts with metric fine pitch thread — Product grades A and B
95.99
ISO 8765:2011
Hexagon head bolts with metric fine pitch thread — Product grades A and B
90.92
ISO/CD 8765
Hexagon head bolts with metric fine pitch thread — Product grades A and B
30.99
ISO 8839:1986
Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals
95.99
ISO 10642:2004
Hexagon socket countersunk head screws
90.92
ISO 10642:2004/Amd 1:2012
Hexagon socket countersunk head screws — Amendment 1
60.60
ISO 10642:2019
Fasteners — Hexagon socket countersunk head screws with reduced loadability
60.60
ISO 10644:1998
Screw and washer assemblies with plain washers — Washer hardness classes 200 HV and 300 HV
95.99
ISO 10644:2009
Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV
90.93
ISO 10664:2005
Hexalobular internal driving feature for bolts and screws
95.99
ISO 10664:2014
Hexalobular internal driving feature for bolts and screws
90.93
ISO 10673:1998
Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A
95.99
ISO 10673:2009
Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A
90.93
ISO 12474:2010
Hexagon socket head cap screws with metric fine pitch thread
90.93
ISO 14579:2001
Hexalobular socket head cap screws
95.99
ISO 14579:2011
Hexalobular socket head cap screws
90.93
ISO 14580:2001
Hexalobular socket cheese head screws
95.99
ISO 14580:2001/Cor 1:2004
Hexalobular socket cheese head screws — Technical Corrigendum 1
95.99
ISO 14580:2011
Hexalobular socket cheese head screws
90.93
ISO 14581:2013
Fasteners — Hexalobular socket countersunk flat head screws
90.92
ISO/NP 14581
Fasteners — Hexalobular socket countersunk flat head screws with reduced loadability
10.99
ISO 14582:2013
Fasteners — Hexalobular socket countersunk head screws, high head
90.93
ISO 14583:2001
Hexalobular socket pan head screws
95.99
ISO 14583:2011
Hexalobular socket pan head screws
90.93
ISO 14584:2001
Hexalobular socket raised countersunk head screws
95.99
ISO 14584:2011
Hexalobular socket raised countersunk head screws
90.93
ISO 15071:1999
Hexagon bolts with flange — Small series — Product grade A
95.99
ISO 15071:2011
Hexagon bolts with flange — Small series — Product grade A
90.93
ISO 15072:1999
Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A
95.99
ISO 15072:1999/Cor 1:2006
Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A — Technical Corrigendum 1
95.99
ISO 15072:2012
Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A
90.93
ISO 16047:2005
Fasteners — Torque/clamp force testing
90.93
ISO 16047:2005/Amd 1:2012
Fasteners — Torque/clamp force testing — Amendment 1
60.60
ISO 23429:2004
Gauging of hexagon sockets
90.93

No matching records found