• Filter:

  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 172/SC 1 Secretariat Stage ICS
ISO 517:1996
Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements
95.99
ISO 517:1996/Cor 1:2006
Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements — Technical Corrigendum 1
95.99
ISO 517:2008
Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements
90.93
ISO 8478:1996
Photography — Camera lenses — Measurement of ISO spectral transmittance
95.99
ISO 8478:2017
Optics and photonics — Camera lenses — Measurement of ISO spectral transmittance
60.60
ISO 9022-10:1994
Optics and optical instruments — Environmental test methods — Part 10: Combined sinusoidal vibration, dry heat or cold
95.99
ISO 9022-10:1998
Optics and optical instruments — Environmental test methods — Part 10: Combined sinusoidal vibration and dry heat or cold
95.99
ISO 9022-11:1994
Optics and optical instruments — Environmental test methods — Part 11: Mould growth
95.99
ISO 9022-11:2015
Optics and photonics — Environmental test methods — Part 11: Mould growth
60.60
ISO 9022-12:1994
Optics and optical instruments — Environmental test methods — Part 12: Contamination
95.99
ISO 9022-12:2015
Optics and photonics — Environmental test methods — Part 12: Contamination
60.60
ISO 9022-13:1994
Optics and optical instruments — Environmental test methods — Part 13: Combined shock, bump or free fall, dry heat or cold
95.99
ISO 9022-13:1998
Optics and optical instruments — Environmental test methods — Part 13: Combined shock, bump or free fall and dry heat or cold
95.99
ISO 9022-14:1994
Optics and optical instruments — Environmental test methods — Part 14: Dew, hoarfrost, ice
95.99
ISO 9022-14:2015
Optics and photonics — Environmental test methods — Part 14: Dew, hoarfrost, ice
60.60
ISO 9022-15:1994
Optics and optical instruments — Environmental test methods — Part 15: Combined random vibration wide band: reproducibility medium, in dry heat or cold
95.99
ISO 9022-15:1998
Optics and optical instruments — Environmental test methods — Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold
95.99
ISO 9022-16:1994
Optics and optical instruments — Environmental test methods — Part 16: Combined bounce or steady-state acceleration, in dry heat or cold
95.99
ISO 9022-16:1998
Optics and optical instruments — Environmental test methods — Part 16: Combined bounce or steady-state acceleration and dry heat or cold
95.99
ISO 9022-17:1994
Optics and optical instruments — Environmental test methods — Part 17: Combined contamination, solar radiation
95.99
ISO 9022-17:2015
Optics and photonics — Environmental test methods — Part 17: Combined contamination, solar radiation
60.60
ISO 9022-18:1994
Optics and optical instruments — Environmental test methods — Part 18: Combined damp heat and low internal pressure
95.99
ISO 9022-19:1994
Optics and optical instruments — Environmental test methods — Part 19: Temperature cycles combined with sinusoidal or random vibration
95.99
ISO 9022-1:1994
Optics and optical instruments — Environmental test methods — Part 1: Definitions, extent of testing
95.99
ISO 9022-1:2012
Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
95.99
ISO 9022-1:2016
Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
60.60
ISO 9022-20:1997
Optics and optical instruments — Environmental test methods — Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide
95.99
ISO 9022-20:2015
Optics and photonics — Environmental test methods — Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide
60.60
ISO 9022-21:1998
Optics and optical instruments — Environmental test methods — Part 21: Combined low pressure and ambient temperature or dry heat
95.99
ISO 9022-22:2012
Optics and photonics — Environmental test methods — Part 22: Combined cold, dry heat or temperature change with bump or random vibration
90.93
ISO 9022-23:2013
Optics and photonics — Environmental test methods — Part 23: Low pressure combined with cold, ambient temperature and dry and damp heat
95.99
ISO 9022-23:2016
Optics and photonics — Environmental test methods — Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat
60.60
ISO 9022-2:1994
Optics and optical instruments — Environmental test methods — Part 2: Cold, heat, humidity
95.99
ISO 9022-2:2002
Optics and optical instruments — Environmental test methods — Part 2: Cold, heat and humidity
95.99
ISO 9022-2:2015
Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity
60.60
ISO 9022-3:1994
Optics and optical instruments — Environmental test methods — Part 3: Mechanical stress
95.99
ISO 9022-3:1998
Optics and optical instruments — Environmental test methods — Part 3: Mechanical stress
95.99
ISO 9022-3:2015
Optics and photonics — Environmental test methods — Part 3: Mechanical stress
60.60
ISO 9022-3:2015/CD Amd 1
Optics and photonics — Environmental test methods — Part 3: Mechanical stress — Amendment 1
30.60
ISO 9022-4:1994
Optics and optical instruments — Environmental test methods — Part 4: Salt mist
95.99
ISO 9022-4:2002
Optics and optical instruments — Environmental test methods — Part 4: Salt mist
95.99
ISO 9022-4:2014
Optics and photonics — Environmental test methods — Part 4: Salt mist
90.60
ISO 9022-5:1994
Optics and optical instruments — Environmental test methods — Part 5: Combined cold, low air pressure
95.99
ISO 9022-6:1994
Optics and optical instruments — Environmental test methods — Part 6: Dust
95.99
ISO 9022-6:2015
Optics and photonics — Environmental test methods — Part 6: Dust
60.60
ISO 9022-7:1994
Optics and optical instruments — Environmental test methods — Part 7: Drip, rain
95.99
ISO 9022-7:1994/Cor 1:2001
Optics and optical instruments — Environmental test methods — Part 7: Drip, rain — Technical Corrigendum 1
95.99
ISO 9022-7:2005
Optics and photonics — Environmental test methods — Part 7: Resistance to drip or rain
95.99
ISO 9022-7:2015
Optics and photonics — Environmental test methods — Part 7: Resistance to drip or rain
60.60
ISO 9022-8:1994
Optics and optical instruments — Environmental test methods — Part 8: High pressure, low pressure, immersion
95.99
ISO 9022-8:2015
Optics and photonics — Environmental test methods — Part 8: High internal pressure, low internal pressure, immersion
60.60
ISO 9022-9:1994
Optics and optical instruments — Environmental test methods — Part 9: Solar radiation
95.99
ISO 9022-9:2016
Optics and photonics — Environmental test methods — Part 9: Solar radiation and weathering
60.60
ISO 9039:1994
Optics and optical instruments — Quality evaluation of optical systems — Determination of distortion
95.99
ISO 9039:1994/Cor 1:2004
Optics and optical instruments — Quality evaluation of optical systems — Determination of distortion — Technical Corrigendum 1
95.99
ISO 9039:2008
Optics and photonics — Quality evaluation of optical systems — Determination of distortion
90.93
ISO 9334:1995
Optics and optical instruments — Optical transfer function — Definitions and mathematical relationships
95.99
ISO 9334:2007
Optics and photonics — Optical transfer function — Definitions and mathematical relationships
95.99
ISO 9334:2012
Optics and photonics — Optical transfer function — Definitions and mathematical relationships
90.93
ISO 9335:1995
Optics and photonics — Optical transfer function — Principles and procedures of measurement
95.99
ISO 9335:1995/Cor 1:2005
Optics and photonics — Optical transfer function — Principles and procedures of measurement — Technical Corrigendum 1
95.99
ISO 9335:2012
Optics and photonics — Optical transfer function — Principles and procedures of measurement
90.93
ISO 9336-1:1994
Optics and optical instruments — Optical transfer function — Application — Part 1: Interchangeable lenses for 35 mm still cameras
95.99
ISO 9336-1:2010
Optics and photonics — Optical transfer function — Application — Part 1: Interchangeable lenses for 35 mm still cameras
90.93
ISO 9336-2:1994
Optics and optical instruments — Optical transfer function — Application — Part 2: Lenses for office copiers
95.99
ISO 9358:1994
Optics and optical instruments — Veiling glare of image forming systems — Definitions and methods of measurement
90.60
ISO 10109-11:2001
Optics and optical instruments — Environmental requirements — Part 11: Optical instruments for outdoor conditions of use
95.99
ISO 10109-12:2004
Optics and optical instruments — Environmental requirements — Part 12: Conditions of transport for optical instruments
95.99
ISO 10109-1:1994
Optics and optical instruments — Environmental requirements — Part 1: General information, definitions, climatic zones and their parameters
95.99
ISO 10109-1:2005
Optics and photonics — Environmental requirements — Part 1: General overview, terms and definitions, climatic zones and their parameters
95.99
ISO 10109-6:1994
Optics and optical instruments — Environmental requirements — Part 6: Test requirements for medical optical devices
95.99
ISO 10109-6:2005
Optics and photonics — Environmental requirements — Part 6: Test requirements for medical optical instruments
95.99
ISO 10109-7:2001
Optics and optical instruments — Environmental requirements — Part 7: Test requirements for optical measuring instruments
95.99
ISO 10109-8:1994
Optics and optical instruments — Environmental requirements — Part 8: Test requirements for extreme conditions of use
95.99
ISO 10109-8:2005
Optics and photonics — Environmental requirements — Part 8: Test requirements for extreme conditions of use
95.99
ISO 10109:2014
Optics and photonics — Guidance for the selection of environmental tests
95.99
ISO 10109:2015
Optics and photonics — Guidance for the selection of environmental tests
60.60
ISO 10110-1
Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General
60.00
ISO 10110-10:1996
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 10: Table representing data of a lens element
95.99
ISO 10110-10:2004
Optics and photonics — Preparation of drawings for optical elements and systems — Part 10: Table representing data of optical elements and cemented assemblies
90.92
ISO 10110-11:1996
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data
95.99
ISO 10110-11:1996/Cor 1:2006
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data — Technical Corrigendum 1
95.99
ISO 10110-11:2016
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data
60.60
ISO 10110-12:1997
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
95.99
ISO 10110-12:2007
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
90.92
ISO 10110-12:2007/Amd 1:2013
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces — Amendment 1
60.60
ISO 10110-13:1997
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 13: Laser irradiation damage threshold
95.99
ISO 10110-14:2003
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance
95.99
ISO 10110-14:2007
Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance
95.99
ISO 10110-14:2018
Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance
60.60
ISO 10110-17:2004
Optics and photonics — Preparation of drawings for optical elements and systems — Part 17: Laser irradiation damage threshold
90.93
ISO 10110-18:2018
Optics and photonics — Preparation of drawings for optical elements and systems — Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae
60.60
ISO 10110-19:2015
Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: General description of surfaces and components
60.60
ISO 10110-1:1996
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 1: General
95.99
ISO 10110-1:2006
Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General
90.92
ISO 10110-2:1996
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 2: Material imperfections — Stress birefringence
95.99
ISO 10110-3:1996
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 3: Material imperfections — Bubbles and inclusions
95.99
ISO 10110-4:1997
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 4: Material imperfections — Inhomogeneity and striae
95.99
ISO 10110-5:1996
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
95.99
ISO 10110-5:1996/Cor 1:1996
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances — Technical Corrigendum 1
95.99
ISO 10110-5:2007
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
95.99
ISO 10110-5:2015
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
60.60
ISO 10110-6:1996
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances
95.99
ISO 10110-6:1996/Cor 1:1999
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances — Technical Corrigendum 1
95.99
ISO 10110-6:2015
Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances
60.60
ISO 10110-7:1996
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances
95.99
ISO 10110-7:2008
Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances
95.99
ISO 10110-7:2017
Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections
60.60
ISO 10110-8:1997
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 8: Surface texture
95.99
ISO 10110-8:2010
Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture; roughness and waviness
90.92
ISO 10110-9:1996
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating
95.99
ISO 10110-9:2016
Optics and photonics — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating
60.60
ISO/FDIS 10110-12
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
50.60
ISO/FDIS 10110-8
Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture
50.20
ISO 11421:1997
Optics and optical instruments — Accuracy of optical transfer function (OTF) measurement
90.93
ISO 13653:1996
Optics and optical instruments — General optical test methods — Measurement of relative irradiance in the image field
95.99
ISO 13653:2019
Optics and photonics — General optical test methods — Measurement of relative irradiance in the image field
60.60
ISO 14997:2003
Optics and optical instruments — Test methods for surface imperfections of optical elements
95.99
ISO 14997:2011
Optics and photonics — Test methods for surface imperfections of optical elements
95.99
ISO 14997:2017
Optics and photonics — Test methods for surface imperfections of optical elements
60.60
ISO 14999-4:2007
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110
95.99
ISO 14999-4:2015
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110
60.60
ISO/TR 14999-1:2005
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 1: Terms, definitions and fundamental relationships
60.60
ISO/TR 14999-2:2005
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 2: Measurement and evaluation techniques
95.99
ISO/TR 14999-2:2019
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 2: Measurement and evaluation techniques
60.60
ISO/TR 14999-3:2005
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 3: Calibration and validation of interferometric test equipment and measurements
60.60
ISO 15368:2001
Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
90.92
ISO/CD 15368
Optics and photonics — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
30.60
ISO 15529:1999
Optics and optical instruments — Optical transfer function — Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
95.99
ISO 15529:2007
Optics and photonics — Optical transfer function — Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
95.99
ISO 15529:2010
Optics and photonics — Optical transfer function — Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
90.93
ISO 15795:2002
Optics and optical instruments — Quality evaluation of optical systems — Assessing the image quality degradation due to chromatic aberrations
90.93
ISO 15795:2002/Cor 1:2007
Optics and optical instruments — Quality evaluation of optical systems — Assessing the image quality degradation due to chromatic aberrations — Technical Corrigendum 1
60.60
ISO/TR 16743:2013
Optics and photonics — Wavefront sensors for characterising optical systems and optical components
60.60
ISO 19962:2019
Optics and photonics — Spectroscopic measurement methods for integrated scattering by plane parallel optical elements
60.60
ISO/TR 21477:2017
Optics and photonics — Preparation of drawings for optical elements and systems — Surface imperfection specification and measurement systems
60.60
ISO 25297-1:2010
Optics and photonics — Electronic exchange of optical data — Part 1: NODIF information model
95.99
ISO 25297-1:2012
Optics and photonics — Electronic exchange of optical data — Part 1: NODIF information model
90.93
ISO 25297-2:2011
Optics and photonics — Electronic exchange of optical data — Part 2: Mapping to the classes and properties defined in ISO 23584
90.93

No matching records found